Displaying publications 81 - 100 of 1357 in total

Abstract:
Sort:
  1. Investigation of optimal conditions for production of highly crystalline nanocellulose with increased yield via novel Cr(III)-catalyzed hydrolysis: Response surface methodology
    Chen YW, Lee HV, Abd Hamid SB
    Carbohydr Polym, 2017 Dec 15;178:57-68.
    PMID: 29050615 DOI: 10.1016/j.carbpol.2017.09.029
    For the first time, a highly efficient Cr(NO3)3 catalysis system was proposed for optimization the yield and crystallinity of nanocellulose end product. A five-level three-factor central composite design coupled with response surface methodology was employed to elucidate parameters interactions between three design factors, namely reaction temperature (x1), reaction time (x2) and concentration of Cr(NO3)3 (x3) over a broad range of process conditions and determine the effect on crystallinity index and product yield. The developed models predicted the maximum nanocellulose yield of 87% at optimum process conditions of 70.6°C, 1.48h, and 0.48M Cr(NO3)3. At these conditions, the obtained nanocellulose presented high crystallinity index (75.3%), spider-web-like interconnected network morphology with the average width of 31.2±14.3nm. In addition, the yielded nanocellulose rendered a higher thermal stability than that of original cellulosic source and expected to be widely used as reinforcement agent in bio-nanocomposites materials.
    Matched MeSH terms: Nanoparticles/chemistry*
  2. Fulltext Nanogels linked with chitosan: a perspective
    Chellappan DK, Panneerselvam J, Madheswaran T, Chellian J, Ambar Jeet Singh BJ, Jia Yee N, et al.
    Minerva Med, 2018 06;109(3):254-255.
    PMID: 29849021 DOI: 10.23736/S0026-4806.18.05462-9
    Matched MeSH terms: Nanoparticles*
  3. Fulltext Using 157Gd doped carbon and 157GdF4 nanoparticles in proton-targeted therapy for effectiveness enhancement and thermal neutron reduction: a simulation study
    Tabbakh F, Hosmane NS, Tajudin SM, Ghorashi AH, Morshedian N
    Sci Rep, 2022 Oct 18;12(1):17404.
    PMID: 36258012 DOI: 10.1038/s41598-022-22429-0
    There are two major problems in proton therapy. (1) In comparison with the gamma-ray therapy, proton therapy has only ~ 10% greater biological effectiveness, and (2) the risk of the secondary neutrons in proton therapy is another unsolved problem. In this report, the increase of biological effectiveness in proton therapy has been evaluated with better performance than 11B in the presence of two proposed nanomaterials of 157GdF4 and 157Gd doped carbon with the thermal neutron reduction due to the presence of 157Gd isotope. The present study is based on the microanalysis calculations using GEANT4 Monte Carlo tool and GEANT4-DNA package for the strand breaks measurement. It was found that the proposed method will increase the effectiveness corresponding to the alpha particles by more than 100% and also, potentially will decrease the thermal neutrons fluence, significantly. Also, in this work, a discussion is presented on a significant contribution of the secondary alpha particles in total effectiveness in proton therapy.
    Matched MeSH terms: Nanoparticles*
  4. Analyzing and mapping the research status, hotspots, and frontiers of biological wound dressings: An in-depth data-driven assessment
    Shen S, Deng L, Du Y, Gao J, Zhang C, Wang Y, et al.
    Int J Pharm, 2022 Dec 15;629:122385.
    PMID: 36375685 DOI: 10.1016/j.ijpharm.2022.122385
    Wound dressings can be applied over the wound sites to provide long-lasting wound management and improve wound healing. Biological wound dressings are superior to synthetic materials due to biodegradability and biocompatibility. These biomaterials have demonstrated huge potential in the field of wound dressings. Applying bibliometric analysis combined with results-based descriptions to characterize the research status, hotspots, and cutting-edge topics, this study is the first in-depth qualitative, quantitative, data-driven overview of biological wound dressings research in recent decades. Filtered data were used to construct co-citation, heatmaps, bi-clustering, strategy maps, and other analyses and visualization. The results show that research on biological wound dressings has progressed considerably in the last 5 years with extensive global collaboration. A clear knowledge base has been developed. Chitosan hydrogels, bacterial cellulose, active agents (silver nanoparticles, growth factors, curcumin, etc.), and electrospinning fibers stand out as research hotspots. The research frontiers include novel starting materials, precise and controlled release systems, and clinical and regenerative medicine applications. We interpreted an overview of the excavated topics and expected the findings here to provide a guide and inspire innovations for developing the next generation wound dressings.
    Matched MeSH terms: Metal Nanoparticles*
  5. Monte Carlo simulation of gold nanoparticles for X-ray enhancement application
    Dheyab MA, Aziz AA, Rahman AA, Ashour NI, Musa AS, Braim FS, et al.
    Biochim Biophys Acta Gen Subj, 2023 Apr;1867(4):130318.
    PMID: 36740000 DOI: 10.1016/j.bbagen.2023.130318
    BACKGROUND: Gold nanoparticles (Au NPs) are regarded as potential agents that enhance the radiosensitivity of tumor cells for theranostic applications. To elucidate the biological mechanisms of radiation dose enhancement effects of Au NPs as well as DNA damage attributable to the inclusion of Au NPs, Monte Carlo (MC) simulations have been deployed in a number of studies.

    SCOPE OF REVIEW: This review paper concisely collates and reviews the information reported in the simulation research in terms of MC simulation of radiosensitization and dose enhancement effects caused by the inclusion of Au NPs in tumor cells, simulation mechanisms, benefits and limitations.

    MAJOR CONCLUSIONS: In this review, we first explore the recent advances in MC simulation on Au NPs radiosensitization. The MC methods, physical dose enhancement and enhanced chemical and biological effects is discussed, followed by some results regarding the prediction of dose enhancement. We then review Multi-scale MC simulations of Au NP-induced DNA damages for X-ray irradiation. Moreover, we explain and look at Multi-scale MC simulations of Au NP-induced DNA damages for X-ray irradiation.

    GENERAL SIGNIFICANCE: Using advanced chemical module-implemented MC simulations, there is a need to assess the radiation-induced chemical radicals that contribute to the dose-enhancing and biological effects of multiple Au NPs.

    Matched MeSH terms: Metal Nanoparticles*
  6. Solar photocatalytic degradation of 2-chlorophenol with ZnO nanoparticles: optimisation with D-optimal design and study of intermediate mechanisms
    Ba-Abbad MM, Takriff MS, Kadhum AA, Mohamad AB, Benamor A, Mohammad AW
    Environ Sci Pollut Res Int, 2017 Jan;24(3):2804-2819.
    PMID: 27837474 DOI: 10.1007/s11356-016-8033-y
    In this study, the photocatalytic degradation of toxic pollutant (2-chlorophenol) in the presence of ZnO nanoparticles (ZnO NPs) was investigated under solar radiation. The three main factors, namely pH of solution, solar intensity and calcination temperature, were selected in order to examine their effects on the efficiency of the degradation process. The response surface methodology (RSM) technique based on D-optimal design was applied to optimise the process. ANOVA analysis showed that solar intensity and calcination temperature were the two significant factors for degradation efficiency. The optimum conditions in the model were solar intensity at 19.8 W/m(2), calcination temperature at 404 °C and pH of 6.0. The maximum degradation efficiency was predicted to be 90.5% which was in good agreement with the actual experimental value of 93.5%. The fit of the D-optimal design correlated very well with the experimental results with higher values of R (2) and R (2)adj correlation coefficients of 0.9847 and 0.9676, respectively. The intermediate mechanism behaviour of the 2-chlorophenol degradation process was determined by gas chromatography-mass spectrometry (GC-MS). The results confirmed that 2-chlorophenol was converted to acetic acid, a non-toxic compound.
    Matched MeSH terms: Nanoparticles*
  7. Nanofluid heat transfer under mixed convection flow in a tube for solar thermal energy applications
    Sekhar YR, Sharma KV, Kamal S
    Environ Sci Pollut Res Int, 2016 May;23(10):9411-7.
    PMID: 26593731 DOI: 10.1007/s11356-015-5715-9
    The solar flat plate collector operating under different convective modes has low efficiency for energy conversion. The energy absorbed by the working fluid in the collector system and its heat transfer characteristics vary with solar insolation and mass flow rate. The performance of the system is improved by reducing the losses from the collector. Various passive methods have been devised to aid energy absorption by the working fluid. Also, working fluids are modified using nanoparticles to improve the thermal properties of the fluid. In the present work, simulation and experimental studies are undertaken for pipe flow at constant heat flux boundary condition in the mixed convection mode. The working fluid at low Reynolds number in the mixed laminar flow range is undertaken with water in thermosyphon mode for different inclination angles of the tube. Local and average coefficients are determined experimentally and compared with theoretical values for water-based Al2O3 nanofluids. The results show an enhancement in heat transfer in the experimental range with Rayleigh number at higher inclinations of the collector tube for water and nanofluids.
    Matched MeSH terms: Nanoparticles*
  8. Selective and simultaneous detection of cadmium, lead and copper by tapioca-derived carbon dot-modified electrode
    Pudza MY, Abidin ZZ, Abdul-Rashid S, Yasin FM, Noor ASM, Abdullah J
    Environ Sci Pollut Res Int, 2020 Apr;27(12):13315-13324.
    PMID: 32020456 DOI: 10.1007/s11356-020-07695-7
    The need for the sensing of environmental pollutants cannot be overemphasized in the twenty-first century. Herein, a sensor has been developed for the sensitive and selective detection of copper (Cu2+), lead (Pb2+) and cadmium (Cd2+) as major heavy metals polluting water environment. A screen-printed carbon electrode (SPCE) modified by fluorescent carbon dots (CDs) and gold nanoparticles (AuNPs) was successfully fabricated for sensing Cu2+, Pb2+ and Cd2+. Differential pulse voltammetry (DPV) and cyclic voltammetry (CV) were deployed for the analysis of ternary analytes. CV was set at a potential range of - 0.8 to + 0.2 V at a scan rate of 100 mV/s, and DPV at a potential range of - 0.8 to + 0.1 V, scan rate of 50 mV/s, pulse rate of 0.2 V and pulse width of 50 ms. DPV technique was applied through the modified electrode for sensitive and selective determination of Cu2+, Pb2+ and Cd2+ at a concentration range of 0.01 to 0.27 ppm for Cu2+, Pb2+ and Cd2+. Tolerance for the highest possible concentration of foreign substances such as Mg2+, K+, Na+, NO3-, and SO42- was observed with a relative error less than ± 3%. The sensitivity of the modified electrode was at 0.17, 0.42 and 0.18 ppm for Cd2+, Pb2+ and Cu2+, respectively, while the limits of detection (LOD) achieved for cadmium, lead and copper were 0.0028, 0.0042 and 0.014 ppm, respectively. The quality of the modified electrode for sensing Cu2+, Pb2+ and Cd2+ at trace levels is in accordance with the World Health Organization (WHO) and Environmental Protection Agency (EPA) water regulation standard. The modified SPCE provides a cost-effective, dependable and stable means of detecting heavy metal ions (Cu2+, Pb2+ and Cd2+) in an aqueous solution. Graphical abstract .
    Matched MeSH terms: Metal Nanoparticles*
  9. Rice husk coated with copper oxide nanoparticles for 17α-ethinylestradiol removal from an aqueous solution: adsorption mechanisms and kinetics
    Alhares HS, Ali QA, Shaban MAA, M-Ridha MJ, Bohan HR, Mohammed SJ, et al.
    Environ Monit Assess, 2023 Aug 24;195(9):1078.
    PMID: 37615739 DOI: 10.1007/s10661-023-11689-6
    The 17 α-ethinylestradiol (EE2) adsorption from aqueous solution was examined using a novel adsorbent made from rice husk powder coated with CuO nanoparticles (CRH). Advanced analyses of FTIR, XRD, SEM, and EDSwere used to identify the classification parameters of a CRH-like surface morphology, configuration, and functional groups. The rice husk was coated with CuO nanoparticles, allowing it to create large surface area materials with significantly improved textural qualities with regard to functional use and adsorption performance, according to a detailed characterization of the synthesized materials. The adsorption process was applied successfully with elimination effectiveness of 100% which can be kept up to 61.3%. The parameters of adsorption were affecting the adsorption process significantly. Thermodynamic data stated that the process of adsorption was endothermic, spontaneous, chemisorption and the molecules of EE2 show affinity with the CRH. It was discovered that the adsorption process controlled by a pseudo-second-order kinetic model demonstrates that the chemisorption process was controlling EE2 removal. The Sips model is regarded as optimal for representing this practice, exhibiting a significantly high determination coefficient of 0.948. This coefficient implies that the adsorption mechanism indicates the occurrence of both heterogeneous and homogeneous adsorption. According to the findings, biomass can serve as a cheap, operative sorbent to remove estrogen from liquified solutions.
    Matched MeSH terms: Nanoparticles*
  10. Fulltext Expanding Arsenal against Neurodegenerative Diseases Using Quercetin Based Nanoformulations: Breakthroughs and Bottlenecks
    Vishwas S, Kumar R, Khursheed R, Ramanunny AK, Kumar R, Awasthi A, et al.
    Curr Neuropharmacol, 2023;21(7):1558-1574.
    PMID: 35950245 DOI: 10.2174/1570159X20666220810105421
    Quercetin (Qu), a dietary flavonoid, is obtained from many fruits and vegetables such as coriander, broccoli, capers, asparagus, onion, figs, radish leaves, cranberry, walnuts, and citrus fruits. It has proven its role as a nutraceutical owing to numerous pharmacological effects against various diseases in preclinical studies. Despite these facts, Qu and its nanoparticles are less explored in clinical research as a nutraceutical. The present review covers various neuroprotective actions of Qu against various neurodegenerative diseases (NDs) such as Alzheimer's, Parkinson's, Huntington's, and Amyotrophic lateral sclerosis. A literature search was conducted to systematically review the various mechanistic pathways through which Qu elicits its neuroprotective actions and the challenges associated with raw Qu that compromise therapeutic efficacy. The nanoformulations developed to enhance Qu's therapeutic efficacy are also covered. Various ongoing/completed clinical trials related to Qu in treating various diseases, including NDs, are also tabulated. Despite these many successes, the exploration of research on Qu-loaded nanoformulations is limited mostly to preclinical studies, probably due to poor drug loading and stability of the formulation, time-consuming steps involved in the formulation, and their poor scale-up capacity. Hence, future efforts are required in this area to reach Qu nanoformulations to the clinical level.
    Matched MeSH terms: Nanoparticles*
  11. Fulltext A Review on the Development of Gold and Silver Nanoparticles-Based Biosensor as a Detection Strategy of Emerging and Pathogenic RNA Virus
    Ibrahim N, Jamaluddin ND, Tan LL, Mohd Yusof NY
    Sensors (Basel), 2021 Jul 28;21(15).
    PMID: 34372350 DOI: 10.3390/s21155114
    The emergence of highly pathogenic and deadly human coronaviruses, namely SARS-CoV and MERS-CoV within the past two decades and currently SARS-CoV-2, have resulted in millions of human death across the world. In addition, other human viral diseases, such as mosquito borne-viral diseases and blood-borne viruses, also contribute to a higher risk of death in severe cases. To date, there is no specific drug or medicine available to cure these human viral diseases. Therefore, the early and rapid detection without compromising the test accuracy is required in order to provide a suitable treatment for the containment of the diseases. Recently, nanomaterials-based biosensors have attracted enormous interest due to their biological activities and unique sensing properties, which enable the detection of analytes such as nucleic acid (DNA or RNA), aptamers, and proteins in clinical samples. In addition, the advances of nanotechnologies also enable the development of miniaturized detection systems for point-of-care (POC) biosensors, which could be a new strategy for detecting human viral diseases. The detection of virus-specific genes by using single-stranded DNA (ssDNA) probes has become a particular interest due to their higher sensitivity and specificity compared to immunological methods based on antibody or antigen for early diagnosis of viral infection. Hence, this review has been developed to provide an overview of the current development of nanoparticles-based biosensors that target pathogenic RNA viruses, toward a robust and effective detection strategy of the existing or newly emerging human viral diseases such as SARS-CoV-2. This review emphasizes the nanoparticles-based biosensors developed using noble metals such as gold (Au) and silver (Ag) by virtue of their powerful characteristics as a signal amplifier or enhancer in the detection of nucleic acid. In addition, this review provides a broad knowledge with respect to several analytical methods involved in the development of nanoparticles-based biosensors for the detection of viral nucleic acid using both optical and electrochemical techniques.
    Matched MeSH terms: Metal Nanoparticles*
  12. High-capacity glycol chitosan-based nanoemulsion for efficient delivery of disulfiram
    Abd Kadir E, Uchegbu IF, Schätzlein AG
    Int J Pharm, 2023 Jun 10;640:123036.
    PMID: 37169106 DOI: 10.1016/j.ijpharm.2023.123036
    Disulfiram (DS) is an anti-alcoholism drug capable of acting against important and hard-to-treat cancers. The drug's relative instability and variable absorption/distribution have led to its variable pharmacokinetics and suboptimal exposure. Hence, it was hypothesised that a nano-enabled form of DS might be able to overcome such limitations. Encapsulation of the labile DS was achieved with quaternary ammonium palmitoyl glycol chitosan (GCPQ) to form a high-capacity, soybean oil-based DS-GCPQ nanoemulsion. DS-GCPQ showed capability of oil-loading up to 50% v/v for a stable entrapment of high drug content. With increasing oil content (10 to 50% v/v), the mean particle size and polydispersity index were also increased (166 to 351 nm and 0.14 to 0.22, respectively) for a given amount of GCPQ. Formulations showed a highly positive particle surface charge (50.9 ± 1.3 mV), contributing to the colloidal stability of the individual particles. DS-GCPQ showed marked cytotoxicity against pancreatic cancer cell lines with enhanced activity in the presence of copper. An intravenous pharmacokinetic study of DS-GCPQ in vivo showed improved plasma drug stability with a DS half-life of 17 min. Prolonged survival was seen in tumour-bearing animals treated with DS-GCPQ supplemented with copper. In conclusion, DS-GCPQ nanoemulsion has the potential to be developed further for cancer therapeutic purposes.
    Matched MeSH terms: Nanoparticles*
  13. A potential paradigm in CRISPR/Cas systems delivery: at the crossroad of microalgal gene editing and algal-mediated nanoparticles
    Feng S, Xie X, Liu J, Li A, Wang Q, Guo D, et al.
    J Nanobiotechnology, 2023 Oct 10;21(1):370.
    PMID: 37817254 DOI: 10.1186/s12951-023-02139-z
    Microalgae as the photosynthetic organisms offer enormous promise in a variety of industries, such as the generation of high-value byproducts, biofuels, pharmaceuticals, environmental remediation, and others. With the rapid advancement of gene editing technology, CRISPR/Cas system has evolved into an effective tool that revolutionised the genetic engineering of microalgae due to its robustness, high target specificity, and programmability. However, due to the lack of robust delivery system, the efficacy of gene editing is significantly impaired, limiting its application in microalgae. Nanomaterials have become a potential delivery platform for CRISPR/Cas systems due to their advantages of precise targeting, high stability, safety, and improved immune system. Notably, algal-mediated nanoparticles (AMNPs), especially the microalgae-derived nanoparticles, are appealing as a sustainable delivery platform because of their biocompatibility and low toxicity in a homologous relationship. In addition, living microalgae demonstrated effective and regulated distribution into specified areas as the biohybrid microrobots. This review extensively summarised the uses of CRISPR/Cas systems in microalgae and the recent developments of nanoparticle-based CRISPR/Cas delivery systems. A systematic description of the properties and uses of AMNPs, microalgae-derived nanoparticles, and microalgae microrobots has also been discussed. Finally, this review highlights the challenges and future research directions for the development of gene-edited microalgae.
    Matched MeSH terms: Nanoparticles*
  14. Nano-drug delivery system: a promising approach against breast cancer
    Malik JA, Ansari JA, Ahmed S, Khan A, Ahemad N, Anwar S
    Ther Deliv, 2023 May;14(5):357-381.
    PMID: 37431741 DOI: 10.4155/tde-2023-0020
    Breast cancer (BC) is among the most frequent malignancies women face around the globe. Nanotherapeutics are constantly evolving to overcome the limitations of conventional diagnostic and therapeutic approaches. Nanotechnology-based nanocarriers have a higher entrapment efficiency, low cytotoxicity, greater stability and improved half-life than conventional therapy. Nano-drug delivery systems have improved pharmacokinetics and pharmacodynamics parameters because of nanomeric size. Currently, various nano-formulations are in preclinical and clinical settings for breast cancer, like polymeric nanoparticles, micelles, nanobodies, magnetic nanoparticles, liposomes, niosomes, gold-nanoparticles, dendrimers and carbon-nanotubes. This review highlights the recent advancement in developing nano-drug delivery systems for BC treatment. This review will open the gateway to researchers to understand the current approaches to developing nano-formulation and improving problems associated with conventional therapy.
    Matched MeSH terms: Nanoparticles*
  15. Polycaprolactone-based Nanocarriers Containing 5-fluorouracil as a Therapeutic Guided Drug Delivery Approach for Enhancing Anticancer Activity
    Mohammadian S, Khazaei M, Maghami P, Avan A, Rezaei M
    Curr Cancer Drug Targets, 2023;23(7):524-533.
    PMID: 36809944 DOI: 10.2174/1568009623666230210140212
    Nowadays, nano-platforms designed for drug delivery systems (DDSs) such as polymers, liposomes, and micelles have been demonstrated to be clinically efficient. The sustained drug release is one of the advantages of DDSs, especially polymer-based nanoparticles. The formulation could enhance the drug's durability, in which the biodegradable polymers are the most interesting building blocks of DDSs. Nano-carriers could circumvent many issues by localized drug delivery and release via certain internalization routes such as intracellular endocytosis paths and increasing biocompatibility. Polymeric nanoparticles and their nanocomposite are one of the most important classes of materials that can be used for the assembly of nanocarriers that can form complex, conjugated and encapsulated forms. The site-specific drug delivery may arise from the ability of nanocarriers to pass through the biological barrier, their specific interactions with receptors, and passive targeting. The better circulation, uptake, and stability along with targeting attributes lead to lesser side effects and damage to normal cells. Hence, in this review, the most recent achievements on polycaprolactone-based or -modified nanoparticles in drug delivery systems (DDSs) for 5-fluorouracil (5-FU) are presented.
    Matched MeSH terms: Nanoparticles*
  16. Fulltext Emergence of mRNA vaccines in the management of cancer
    Mohamad Razif MI, Nizar N, Zainal Abidin NH, Muhammad Ali SN, Wan Zarimi WNN, Khotib J, et al.
    Expert Rev Vaccines, 2023;22(1):629-642.
    PMID: 37401128 DOI: 10.1080/14760584.2023.2232450
    INTRODUCTION: mRNA vaccines have been developed as a promising cancer management. It is noted that specification of the antigen sequence of the target antigen is necessary for the design and manufacture of an mRNA vaccine.

    AREAS COVERED: The steps involved in preparing the mRNA-based cancer vaccines are isolation of the mRNA cancer from the target protein using the nucleic acid RNA-based vaccine, sequence construction to prepare the DNA template, in vitro transcription for protein translation from DNA into mRNA strand, 5' cap addition and poly(A) tailing to stabilize and protect the mRNA from degradation and purification process to remove contaminants produced during preparation.

    EXPERT OPINION: Lipid nanoparticles, lipid/protamine/mRNA nanoparticles, and cell-penetrating peptides have been used to formulate mRNA vaccine and to ensure vaccine stability and delivery to the target site. Delivery of the vaccine to the target site will trigger adaptive and innate immune responses. Two predominant factors of the development of mRNA-based cancer vaccines are intrinsic influence and external influence. In addition, research relating to the dosage, route of administration, and cancer antigen types have been observed to positively impact the development of mRNA vaccine.

    Matched MeSH terms: Nanoparticles*
  17. Magnetic Nanoparticle-Based Semi-automated Panning for High-Throughput Antibody Selection
    Ch'ng ACW, Konthur Z, Lim TS
    Methods Mol Biol, 2023;2702:291-313.
    PMID: 37679626 DOI: 10.1007/978-1-0716-3381-6_15
    Bio-panning is a common process involved in recombinant antibody selection against defined targets. The biopanning process aims to isolate specific antibodies against an antigen via affinity selection from a phage display library. In general, antigens are immobilized on solid surfaces such as polystyrene plastic, magnetic beads, and nitrocellulose. For high-throughput selection, semi-automated panning selection allows simultaneous panning against multiple target antigens adapting automated particle processing systems such as the KingFisher Flex. The system setup allows for minimal human intervention for pre- and post-panning steps such as antigen immobilization, phage rescue, and amplification. In addition, the platform is also adaptable to perform polyclonal and monoclonal ELISA for the evaluation process. This chapter will detail the protocols involved from the selection stage until the monoclonal ELISA evaluation with important notes attached at the end of this chapter for optimization and troubleshooting purposes.
    Matched MeSH terms: Magnetite Nanoparticles*
  18. Recognizing CRISPR as the new age disease-modifying drug: Strategies to bioengineer CRISPR/Cas for direct in vivo delivery
    Thevendran R, Maheswaran S
    Biotechnol J, 2023 Sep;18(9):e2300077.
    PMID: 37179485 DOI: 10.1002/biot.202300077
    Clustered regularly interspaced short palindromic repeats (CRISPR) have established itself as a frontier technology in genetic engineering. Researchers have successfully used the CRISPR/Cas system as precise gene editing tools and have further expanded their scope beyond both imaging and diagnostic applications. The most prominent utility of CRISPR is its capacity for gene therapy, serving as the contemporary, disease-modifying drug at the genetic level of human medical disorders. Correcting these diseases using CRISPR-based gene editing has developed to the extent of preclinical trials and possible patient treatments. A major impediment in actualizing this is the complications associated with in vivo delivery of the CRISPR/Cas complex. Currently, only the viral vectors (e.g., lentivirus) and non-viral encapsulation (e.g., lipid particles, polymer-based, and gold nanoparticles) techniques have been extensively reviewed, neglecting the efficiency of direct delivery. However, the direct delivery of CRISPR/Cas for in vivo gene editing therapies is an intricate process with numerous drawbacks. Hence, this paper discusses in detail both the need and the strategies that can potentially improve the direct delivery aspects of CRISPR/Cas biomolecules for gene therapy of human diseases. Here, we focus on enhancing the molecular and functional features of the CRISPR/Cas system for targeted in vivo delivery such as on-site localization, internalization, reduced immunogenicity, and better in vivo stability. We additionally emphasize the CRISPR/Cas complex as a multifaceted, biomolecular vehicle for co-delivery with therapeutic agents in targeted disease treatments. The delivery formats of efficient CRISPR/Cas systems for human gene editing are also briefly elaborated.
    Matched MeSH terms: Metal Nanoparticles*
  19. Zingiber officinale Roscoe Essential Oils-Loaded Chitosan Nanoparticles with Enhanced Bactericidal Efficacy against Burkholderia glumae in Rice
    Tiran Gunasena M, Hussein MZ, Ali A, Wahab MAA, Bashir Kutawa A, Rafif A, et al.
    Chem Biodivers, 2023 Dec;20(12):e202300686.
    PMID: 37905394 DOI: 10.1002/cbdv.202300686
    Ginger essential oils (GEO) shows exceptional antimicrobial properties against plant pathogens. Due to its high volatility and low stability, it requires encapsulation to retain its effective properties. The GEO-Chitosan (GEO-CS) nanobactericide was developed using the ionic gelation method. The nanobactericides show particle diameters of 465, 28, 35, 48 and 500 nm when sodium tripolyphosphate (TPP) concentrations used in the preparation were 0.0, 0.5, 1.0, 2.0 and 4.0 %, respectively. The X-ray diffraction and the UV-vis studies revealed that the GEO was encapsulated into the chitosan nanoparticles with an encapsulation efficiency of around 46 % and a loading capacity of 27-34 %. The antibacterial activity of GEO-chitosan nanobactericide against Burkholderia glumae (Bg) was found to be 7.5-11.8 mm, with minimum inhibitory concentration and minimum bactericidal concentration values of 15.6 μl/mL and 31.25 μl/mL, respectively. Hence, these findings indicate that the prepared GEO-CS nanobactericides were found to be effective against Bg. This preliminary study is toward the development of new agronanobactericides using a natural product to control Bg.
    Matched MeSH terms: Nanoparticles*
  20. Review of inhalable nanoparticles for the pulmonary delivery of anti-tuberculosis drugs
    Ramachandran S, Prakash P, Mohtar N, Kumar KS, Parumasivam T
    Pharm Dev Technol, 2023 Dec;28(10):978-991.
    PMID: 37937865 DOI: 10.1080/10837450.2023.2279691
    Tuberculosis is an airborne disease caused by the pathogen, Mycobacterium tuberculosis, which predominantly affects the lungs. World Health Organization (WHO) has reported that about 85% of TB patients are cured with the existing 6-month antibiotic regimen. However, the lengthy oral administration of high-dose anti-TB drugs is associated with significant side effects and leads to drug resistance cases. Alternatively, reformulating existing anti-tubercular drugs into inhalable nanoparticulate systems is a promising strategy to overcome the challenges associated with oral treatment as they could enhance drug retention in the pulmonary region to achieve an optimal drug concentration in the infected lungs. Hence, this review provides an overview of the literature on inhalable nano-formulations for the delivery of anti-TB drugs, including their formulation techniques and preclinical evaluations between the years 2000 and 2020, gathered from electronic journals via online search engines such as Google Scholar and PubMed. Previous in vitro and in vivo studies highlighted that the nano-size, low toxicity, and high efficacy were among the factors influencing the fate of nanoparticulate system upon deposition in the lungs. Although many preclinical studies have shown that inhalable nanoparticles increased therapeutic efficacy and minimised adverse drug reactions when delivered through the pulmonary route, none of them has progressed into clinical trials to date. This could be attributed to the high cost of inhaled regimes due to the expensive production and characterisation of the nanoparticles as well as the need for an inhalation device as compared to the oral treatment. Another barrier could be the lack of medical acceptance due to insufficient number of trained staff to educate the patients on the correct usage of the inhalation device. Hence, these barriers should be addressed satisfactorily to make the inhaled nanoparticles regimen a reality for the treatment of TB.
    Matched MeSH terms: Nanoparticles*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links