Displaying publications 81 - 97 of 97 in total

Abstract:
Sort:
  1. Danaraj TJ
    Med J Malaya, 1947;4:278-288.
    Eight caaes of this condition are described, the patients being four Ceylonese, three Indians, and one Chinese, all males except one. Symptoms consisted of breathlessness and cough, sputum being sometimes purulent and occasionally blood-stained. Six of the patients complained of loss of weight, and in one, a Ceylonese schoolboy, this was the only presenting symptom. The authors found the most troublesome complaint to be a paroxysmal cough which was always worst at night. On clinical examination rhonchi were heard scattered throughout both lung fields in five cases, the lungs being clear in the other three. X-ray examination showed characteristic mottling of both lungs in four cases and of one lung in one case; another showed increased vascular markings, while in two the lungs were clear. Sputum was examined for tubercle bacilli and mites but none were found. The technique used for searching for mites is not described. A marked eosinophilia was found in all cases, the highest count recorded being 33, 264 eosinophils per cmm.Treatment consisted of arsenic, given in the form of neoarsphenamine, six injections of 0.3 gm. in six cases, and stovarsol 4 grains t.d.s. for seven and ten days respectively in the other two. Four of the patients were cured, three were improved, while one was showing a favourable response although treatment had not been completed.The author emphasizes the importance of performing repeated blood counts in order to avoid missing this condition. Out of the eight cases which he describes, one had been wrongly diagnosed as pulmonary tuberculosis and three as bronchial asthma. One of the latter had an initial eosinophil count of 4, 092 which rose to 17, 700 three weeks later. H. T. H. Wilson
    Matched MeSH terms: Arsenic
  2. Tengku Nur Alia TKA, Hing LS, Sim SF, Pradit S, Ahmad A, Ong MC
    Mar Pollut Bull, 2020 Apr;153:111009.
    PMID: 32275555 DOI: 10.1016/j.marpolbul.2020.111009
    Metallic contamination in seafood, especially fish, has been of increasing concern to human health. Moreover, with increasing dependency on farmed fish for fish resources, the metallic contamination in them is still questionable. This study aimed to investigate the effects of cooking (steaming) on heavy metal concentration in farmed fish and to estimate its potential human health risk. Farmed sea basses (Lates calcarifer) from Setiu Lagoon were used to study the difference in metal uptake through human consumption of raw and cooked (steamed) fish samples. Selected heavy metals, namely copper (Cu), zinc (Zn), arsenic (As), cadmium (Cd), mercury (Hg) and lead (Pb), were measured using ICP-MS following Teflon bomb closed digestion of the fish samples. Cooking of the fish muscle by steaming was applied to investigate if cooking changes the concentration of heavy metals. Mercury and As were found accumulated more notably in the fish muscle, though only Hg was found to show significant (p > 0.05) increase when L. calcarifer is cooked. The amount of As in the fish muscle throughout its growth can be potentially harmful to humans, with the highest averaged concentration at 3.29 ± 0.65 mg/kg dw. above the standard set by the Malaysian Food Regulation (1985) of >1 mg/kg. All the other heavy metals were at relatively safe concentrations well below the standard set by both national and international guidelines. The PTWI per individual of L. calcarifer for As was at 0.84 mg/kg bw., which indicated that the amount of this fish safe for consumption without any adverse effect is 170 g/week. Therefore, long-term intake of these fish may pose a risk to human health due to the relatively higher Hg and As concentration found in these fishes.
    Matched MeSH terms: Arsenic
  3. Titah HS, Abdullah SRS, Idris M, Anuar N, Basri H, Mukhlisin M, et al.
    Int J Microbiol, 2018;2018:3101498.
    PMID: 30723505 DOI: 10.1155/2018/3101498
    Certain rhizobacteria can be applied to remove arsenic in the environment through bioremediation or phytoremediation. This study determines the minimum inhibitory concentration (MIC) of arsenic on identified rhizobacteria that were isolated from the roots of Ludwigia octovalvis (Jacq.) Raven. The arsenic biosorption capability of the was also analyzed. Among the 10 isolated rhizobacteria, five were Gram-positive (Arthrobacter globiformis, Bacillus megaterium, Bacillus cereus, Bacillus pumilus, and Staphylococcus lentus), and five were Gram-negative (Enterobacter asburiae, Sphingomonas paucimobilis, Pantoea spp., Rhizobium rhizogenes, and Rhizobium radiobacter). R. radiobacter showed the highest MIC of >1,500 mg/L of arsenic. All the rhizobacteria were capable of absorbing arsenic, and S. paucimobilis showed the highest arsenic biosorption capability (146.4 ± 23.4 mg/g dry cell weight). Kinetic rate analysis showed that B. cereus followed the pore diffusion model (R2 = 0.86), E. asburiae followed the pseudo-first-order kinetic model (R2 = 0.99), and R. rhizogenes followed the pseudo-second-order kinetic model (R2 = 0.93). The identified rhizobacteria differ in their mechanism of arsenic biosorption, arsenic biosorption capability, and kinetic models in arsenic biosorption.
    Matched MeSH terms: Arsenic
  4. Meera M, Agamuthu P
    Int J Phytoremediation, 2012 Feb;14(2):186-99.
    PMID: 22567704
    Terrestrial plants as potential phytoremediators for remediation of surface soil contaminated with toxic metals have gained attention in clean-up technologies. The potential of kenaf (Hibiscus cannabinus L.) to offer a cost-effective mechanism to remediate Fe and As from landfill leachate-contaminated soil was investigated. Pot experiment employing soil polluted with treatments of Jeram landfill leachate was conducted for 120 days. Plants were harvested after 8th, 12th, and 16th weeks of growth. Accumulation of Fe and As was assessed based on Bioconcentration Factor and Translocation Factor. Results showed sequestration of 0.06-0.58 mg As and 66.82-461.71 mg Fe per g plant dry weight in kenaf root, which implies that kenaf root can be an bioavailable sink for toxic metals. Insignificant amount of Fe and As was observed in the aerial plant parts (< 12% of total bioavailable metals). The ability of kenaf to tolerate these metals and avoid phytotoxicity could be attributed to the stabilization of the metals in the roots and hence reduction of toxic metal mobility (TF < 1). With the application of leachate, kenaf was also found to have higher biomass and subsequently recorded 11% higher bioaccumulation capacity, indicating its suitability for phytoextraction of leachate contaminated sites.
    Matched MeSH terms: Arsenic/metabolism*
  5. Jaafar R, Omar I, Jidon AJ, Wan-Khamizar BW, Siti-Aishah BM, Sharifah-Noor-Akmal SH
    Med J Malaysia, 1993 Mar;48(1):86-92.
    PMID: 8341178
    The association of arsenical poisoning with the development of skin cancer is well-known. In Malaysia, arsenic has been shown to coexist with tin in tin-mining land. Our preliminary investigation has shown that the level of arsenic in well water from a tin-mining area is high. We report 3 patients with cutaneous lesions typical of chronic arsenical poisoning such as hyperpigmentation, keratoses and skin cancer. These patients have positive histories of previous domicility in tin-mining areas. We conclude that these patients developed chronic arsenical poisoning from drinking well water polluted with arsenic from the tin-mining soil.
    Matched MeSH terms: Arsenic Poisoning*
  6. Hajeb P, Selamat J, Afsah-Hejri L, Mahyudin NA, Shakibazadeh S, Sarker MZ
    J Food Prot, 2015 Jan;78(1):172-9.
    PMID: 25581193 DOI: 10.4315/0362-028X.JFP-14-248
    High-quality fish oil for human consumption requires low levels of toxic elements. The aim of this study was to compare different oil extraction methods to identify the most efficient method for extracting fish oil of high quality with the least contamination. The methods used in this study were Soxhlet extraction, enzymatic extraction, wet reduction, and supercritical fluid extraction. The results showed that toxic elements in fish oil could be reduced using supercritical CO2 at a modest temperature (60°C) and pressure (35 MPa) with little reduction in the oil yield. There were significant reductions in mercury (85 to 100%), cadmium (97 to 100%), and lead (100%) content of the fish oil extracted using the supercritical fluid extraction method. The fish oil extracted using conventional methods contained toxic elements at levels much higher than the accepted limits of 0.1 μg/g.
    Matched MeSH terms: Arsenic/isolation & purification*
  7. Hajeb P, Jinap S, Shakibazadeh Sh, Afsah-Hejri L, Mohebbi GH, Zaidul IS
    PMID: 25090228 DOI: 10.1080/19440049.2014.942707
    This study aims to optimise the operating conditions for the supercritical fluid extraction (SFE) of toxic elements from fish oil. The SFE operating parameters of pressure, temperature, CO2 flow rate and extraction time were optimised using a central composite design (CCD) of response surface methodology (RSM). High coefficients of determination (R²) (0.897-0.988) for the predicted response surface models confirmed a satisfactory adjustment of the polynomial regression models with the operation conditions. The results showed that the linear and quadratic terms of pressure and temperature were the most significant (p < 0.05) variables affecting the overall responses. The optimum conditions for the simultaneous elimination of toxic elements comprised a pressure of 61 MPa, a temperature of 39.8ºC, a CO₂ flow rate of 3.7 ml min⁻¹ and an extraction time of 4 h. These optimised SFE conditions were able to produce fish oil with the contents of lead, cadmium, arsenic and mercury reduced by up to 98.3%, 96.1%, 94.9% and 93.7%, respectively. The fish oil extracted under the optimised SFE operating conditions was of good quality in terms of its fatty acid constituents.
    Matched MeSH terms: Arsenic/analysis; Arsenic/isolation & purification*
  8. Affum AO, Osae SD, Nyarko BJ, Afful S, Fianko JR, Akiti TT, et al.
    Environ Monit Assess, 2015 Feb;187(2):1.
    PMID: 25600401 DOI: 10.1007/s10661-014-4167-x
    In recent times, surface water resource in the Western Region of Ghana has been found to be inadequate in supply and polluted by various anthropogenic activities. As a result of these problems, the demand for groundwater by the human populations in the peri-urban communities for domestic, municipal and irrigation purposes has increased without prior knowledge of its water quality. Water samples were collected from 14 public hand-dug wells during the rainy season in 2013 and investigated for total coliforms, Escherichia coli, mercury (Hg), arsenic (As), cadmium (Cd) and physicochemical parameters. Multivariate statistical analysis of the dataset and a linear stoichiometric plot of major ions were applied to group the water samples and to identify the main factors and sources of contamination. Hierarchal cluster analysis revealed four clusters from the hydrochemical variables (R-mode) and three clusters in the case of water samples (Q-mode) after z score standardization. Principal component analysis after a varimax rotation of the dataset indicated that the four factors extracted explained 93.3 % of the total variance, which highlighted salinity, toxic elements and hardness pollution as the dominant factors affecting groundwater quality. Cation exchange, mineral dissolution and silicate weathering influenced groundwater quality. The ranking order of major ions was Na(+) > Ca(2+) > K(+) > Mg(2+) and Cl(-) > SO4 (2-) > HCO3 (-). Based on piper plot and the hydrogeology of the study area, sodium chloride (86 %), sodium hydrogen carbonate and sodium carbonate (14 %) water types were identified. Although E. coli were absent in the water samples, 36 % of the wells contained total coliforms (Enterobacter species) which exceeded the WHO guidelines limit of zero colony-forming unit (CFU)/100 mL of drinking water. With the exception of Hg, the concentration of As and Cd in 79 and 43 % of the water samples exceeded the WHO guideline limits of 10 and 3 μg/L for drinking water, respectively. Reported values in some areas in Nigeria, Malaysia and USA indicated that the maximum concentration of Cd was low and As was high in this study. Health risk assessment of Cd, As and Hg based on average daily dose, hazard quotient and cancer risk was determined. In conclusion, multiple natural processes and anthropogenic activities from non-point sources contributed significantly to groundwater salinization, hardness, toxic element and microbiological contamination of the study area. The outcome of this study can be used as a baseline data to prioritize areas for future sustainable development of public wells.
    Matched MeSH terms: Arsenic/analysis*
  9. Arain SS, Kazi TG, Afridi HI, Talpur FN, Kazi AG, Brahman KD, et al.
    Biol Trace Elem Res, 2015 Dec;168(2):287-95.
    PMID: 25975948 DOI: 10.1007/s12011-015-0355-y
    It has been extensively reported that chewing of smokeless tobacco (SLT) can lead to cancers of oral cavity. In present study, the relationship between arsenic (As) exposure via chewing/inhaling different SLT products in oral cancer patients have or/not consumed SLT products was studied. The As in different types of SLT products (gutkha, mainpuri, and snuff) and biological (scalp hair and blood) samples of different types of oral cancer patients and controls were analyzed. Both controls and oral cancer patients have same age group (ranged 30-60 years), socio-economic status, localities, and dietary habits. The concentrations of As in SLT products and biological samples were measured by electrothermal atomic absorption spectrophotometer after microwave-assisted acid digestion. The validity and accuracy of the methodology were checked by certified reference materials. The resulted data of present study indicates that the concentration of As was significantly higher in scalp hair and blood samples of oral cancer patients than those of controls (p<0.001). It was also observed that the values of As were two- to threefolds higher in biological samples of controls subjects, consuming SLT products as compared to those have none of these habits (p>0.01). The intake of As via consuming different SLT may have synergistic effects, in addition to other risk factors associated with oral cancer.
    Matched MeSH terms: Arsenic/analysis*
  10. Ahmad H, Haseen U, Umar K, Ansari MS, Ibrahim MNM
    Mikrochim Acta, 2019 08 27;186(9):649.
    PMID: 31456042 DOI: 10.1007/s00604-019-3753-6
    The authors describe a method for solvent-free mechano-chemical synthesis of a bioinspired sorbent. A 2D ultra-thin carbon sheet similar to graphene oxide was prepared using a natural waste (onion sheet). The formation of 2D carbon sheets was confirmed by Raman spectroscopy, X-ray photoelectron spectroscopy and ATR-IR. The surface morphology was characterized by field emission scanning electron microscopy and high-resolution tunneling electron microscopy. The carbon sheets were decorated with crystalline MnFe2O4 nanoparticles by solid-state reaction at room temperature. The presence of magnetic particles in the final product was confirmed by vibrating sample magnetometry and electron microscopy. The synergistic effect of carbon sheets and MnFe2O4 led to an enhanced sorption of arsenic species compared to bare carbon sheets or to MnFe2O4 nanoparticles. A column was prepared for the simultaneous preconcentration and determination of trace levels of As(III) and As(V) from water samples. The preconcentration factors are between 900 and 833 for As(III) and As(V) species, respectively. The linearity of the calibration plot ranges from 0.4-10 ng mL-1. The detection limits (at 3σ) for both As(III) and As(V) are 30 pg mL-1. The Student's t values for the analysis of spiked samples are lower than the critical Student's t values at a 95% confidence level. The recoveries from spiked water samples range between 99 and 102.8%. Graphical abstract Schematic representation of the preparation of carbon sheets similar to graphene oxide from onion sheaths after pyrolysis at 800 °C. The prepared carbon sheet-MnFe2O4 composite shows excellent arsenic sorption and preconcentration down to the pg mL-1 concentration.
    Matched MeSH terms: Arsenic
  11. Normina Ahmad Bustami, Yu Bin Ho, Chung Keat Tan, Ahmad Zaharin Aris, Eugenie Sin Sing Tan
    MyJurnal
    Introduction: In Malaysia, herbal medicines are used for variety of reasons including health promotion and home remedies during pregnancy and postpartum with Manjakani (Quercus infectoria) as one of the most commonly consumed herbs. Herbal medicines consumption had been linked to heavy metals contamination and transfer from mother to infant and may affect infant’s growth and development. This study aims to (i) determine Manjakani consumption among postpartum mothers, (ii) quantify its heavy metals level, namely lead, cadmium, arsenic and chromium, and (iii) determine health risk associated with its consumption. Methods: A cross-sectional study involving 106 postpartum mothers was carried out in Kuala Lumpur. Six samples of Manjakani were sampled and extracted using microwave digester and analysed using Inductively coupled plasma mass spectrometry (ICP-MS). Non-carcinogenic health risks for herbal medicine consumption were calculated using Hazard Quotient (HQ). Results: Manjakani was consumed by 16% of mothers (n=17). Highest level of the metals was shown by chromium with mean concentration of 4210 ± 1910 ug/kg, followed by lead (170.8 ± 193.2), arsenic (39.3 ± 27.1) and cadmium (7.7 ± 0.76). There were no significant non-carcinogenic health risks with lead, arsenic, chromium and cadmium contamination (HQ < 1). Conclusion: Manjakani is consumed by mothers during confinement period. Heavy metals were quantified in Manjakani although no significant association was observed with socio-demographic characteristics and birth outcomes.
    Matched MeSH terms: Arsenic
  12. Voon, H.C., Bhat, Rajeev, Karim, A.A., Rosma, A.
    MyJurnal
    Traditionally, in Chinese medicine, tree peony and apple flower buds are used to prepare herbal decoctions to cure various ailments. As both of these flowers are popular and used regularly, providing scientific evidence on their basic composition is a necessity. Hence, in the present study, we report the chemical composition of these two flower buds. Results revealed tree peony and apple flower buds to have high crude protein (15.73 and 26.30%), fibre (13.11 and 16.51%), and carbohydrate (57.84 and 40.63%) contents. Both the flowers had significant amounts of essential amino acids and unsaturated fatty acids. Essential minerals present in tree peony and apple flowers were potassium (1540.37 and 1125.60 mg/100 g), calcium (462.46 and 449.98 mg/100 g), magnesium (241.51 and 164.23 mg/100 g), sodium (12.75 and 20.06 mg/100 g), and phosphorus (420.00 and 590.00 mg/100 g), respectively. Heavy metals (cadmium, nickel, mercury, lead, and arsenic) were detected in trace amounts (< 0.50 mg/100 g) in both the flower buds. Results obtained indicate that both flowers could be exploited as an additional source of nutraceutical for the development of new functional foods.
    Matched MeSH terms: Arsenic
  13. Amarasingham RD, Lee H
    Med J Malaya, 1969 Mar;23(3):220-7.
    PMID: 4240079
    Matched MeSH terms: Arsenic Poisoning
  14. Veeraswamy Kesavan, Abdulrasheed Mansur, Mohd Syahmi Ramzi Salihan, Rahman, M.F., Suhaili, Zarizal, Shukor, M.Y.
    MyJurnal
    The indiscriminate released of heavy metals and xenobiotics into soils and aquatic bodies
    severely alter soil organisms and the ecosystem. The isolation of xenobiotics degrading
    microorganisms is cost-effective and naturally pleasant approach. Lately, the toxicological effect
    of molybdenum to the spermatogenesis of several organisms has been record. This present study
    is aimed at the isolation and characterization of a bacterium capable of converting molybdenum
    to the colloidal molybdenum blue. Bacteria characterization was performed in a microplate
    format using resting cells. Thus, the reduction process can be employed as a device for
    molybdenum bioremediation. The results of the study revealed an optimum reduction at pH
    between 6.0 and 6.3 and temperatures of between 25 and 40 oC. Similarly, it was also observed
    that a phosphate concentration not greater than 5.0 mM and a sodium molybdate concentration
    at 20 mM was required for reduction. Glucose was observed as the best carbon source to support
    reduction. Following the scanning of molybdenum blue, it revealed an absorption spectrum
    indicating the characteristics of molybdenum blue as a reduced phosphomolybdate. Molybdenum
    reduction is inhibited by heavy metals like silver, lead, arsenic and mercury. Furthermore, the
    ability of the bacterium (Pseudomonas sp. strain Dr.Y Kertih) to utilize several organic
    xenobiotics such as phenol, acrylamide, nicotinamide, acetamide, iodoacetamide, propionamide,
    acetamide, sodium dodecyl sulfate (SDS) and diesel as electron donor sources for aiding
    reduction or as carbon sources for growth was also examined. Finding showed that none was
    capable of aiding molybdenum reduction, however the bacterium was capable of growing on both
    diesel and phenol as carbon sources. GC analysis was used to confirmed diesel degradation.
    Matched MeSH terms: Arsenic
  15. Ahmad NF, Kamboh MA, Nodeh HR, Halim SNBA, Mohamad S
    Environ Sci Pollut Res Int, 2017 Sep;24(27):21846-21858.
    PMID: 28776296 DOI: 10.1007/s11356-017-9820-9
    The present work describes the successful functionalization/magnetization of bio-polymeric spores of Lycopodium clavatum (sporopollenin) with 1-(2-hydroxyethyl) piperazine. Analytical techniques, i.e., Fourier transform infrared (FT-IR), field emission scanning electron microscope (FESEM), energy-dispersive X-ray spectroscopy (EDS), and vibrating sample magnetometer (VSM), were used to confirm the formation of 1-(2-hydroxyethyl) piperazine-functionalized magnetic sporopollenin (MNPs-Sp-HEP). The proposed adsorbent (MNPs-Sp-HEP) was used for the removal of noxious Pb(II) and As(III) metal ions from aqueous media through a batch-wise method. Different experimental parameters were optimized for the effective removal of selected noxious metal ions. Maximum adsorption capacity (q m ) 13.36 and 69.85 mg g-1 for Pb(II) and As(III), respectively, were obtained. Thermodynamic parameters such as free energy (ΔG°), entropy (ΔS°), and enthalpy (ΔH°) were also studied from the adsorption results and were used to elaborate the mechanism of their confiscation. The obtained results indicated that newly adsorbent can be successfully applied for the decontamination of noxious Pb(II) and As(III) from the aqueous environment.
    Matched MeSH terms: Arsenic
  16. Abbas SZ, Riaz M, Ramzan N, Zahid MT, Shakoori FR, Rafatullah M
    Braz J Microbiol, 2014;45(4):1309-15.
    PMID: 25763035
    The present study proposed the isolation of arsenic resistant bacteria from wastewater. Only three bacterial isolates (MNZ1, MNZ4 and MNZ6) were able to grow in high concentrations of arsenic. The minimum inhibitory concentrations of arsenic against MNZ1, MNZ4 and MNZ6 were 300 mg/L, 300 mg/L and 370 mg/L respectively. The isolated strains showed maximum growth at 37 °C and at 7.0 pH in control but in arsenite stress Luria Bertani broth the bacterial growth is lower than control. All strains were arsenite oxidizing. All strains were biochemically characterized and ribotyping (16S rRNA) was done for the purpose of identification which confirmed that MNZ1 was homologous to Enterobacter sp. while MNZ4 and MNZ6 showed their maximum homology with Klebsiella pneumoniae. The protein profiling of these strains showed in arsenic stressed and non stressed conditions, so no bands of induced proteins appeared in stressed conditions. The bacterial isolates can be exploited for bioremediation of arsenic containing wastes, since they seem to have the potential to oxidize the arsenite (more toxic) into arsenate (less toxic) form.
    Matched MeSH terms: Arsenic/metabolism*
  17. Kato M, Azimi MD, Fayaz SH, Shah MD, Hoque MZ, Hamajima N, et al.
    Chemosphere, 2016 Dec;165:27-32.
    PMID: 27619645 DOI: 10.1016/j.chemosphere.2016.08.124
    Toxic elements in drinking water have great effects on human health. However, there is very limited information about toxic elements in drinking water in Afghanistan. In this study, levels of 10 elements (chromium, nickel, copper, arsenic, cadmium, antimony, barium, mercury, lead and uranium) in 227 well drinking water samples in Kabul, Afghanistan were examined for the first time. Chromium (in 0.9% of the 227 samples), arsenic (7.0%) and uranium (19.4%) exceeded the values in WHO health-based guidelines for drinking-water quality. Maximum chromium, arsenic and uranium levels in the water samples were 1.3-, 10.4- and 17.2-fold higher than the values in the guidelines, respectively. We next focused on uranium, which is the most seriously polluted element among the 10 elements. Mean ± SD (138.0 ± 1.4) of the (238)U/(235)U isotopic ratio in the water samples was in the range of previously reported ratios for natural source uranium. We then examined the effect of our originally developed magnesium (Mg)-iron (Fe)-based hydrotalcite-like compounds (MF-HT) on adsorption for uranium. All of the uranium-polluted well water samples from Kabul (mean ± SD = 190.4 ± 113.9 μg/L; n = 11) could be remediated up to 1.2 ± 1.7 μg/L by 1% weight of our MF-HT within 60 s at very low cost (<0.001 cents/day/family) in theory. Thus, we demonstrated not only elevated levels of some toxic elements including natural source uranium but also an effective depurative for uranium in well drinking water from Kabul. Since our depurative is effective for remediation of arsenic as shown in our previous studies, its practical use in Kabul may be encouraged.
    Matched MeSH terms: Arsenic/analysis
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links