MyMedR

Displaying publications 81 - 100 of 138 in total

Abstract:

Sort:

First Report of Pantoea anthophila Causing Soft Rot Disease in Clausena lansium (Wampee) in China

Zhou JN, Liu SY, Chen YF, Liao LS

Plant Dis, 2015 Mar;99(3):416.
PMID: 30699721 DOI: 10.1094/PDIS-10-14-1025-PDN

Clausena lansium, also known as wampee (Clausena wampi), is a plant species native to China, Vietnam, the Philippines, Malaysia, and Indonesia, where it is widely cultivated, and also grown in India, Sri Lanka, Queensland, Florida, and Hawaii, but less frequently (3). The fruit can be consumed fresh or made into juice, jam, or succade. In summer to fall 2014, a soft rot disease was found in a wampee planting region in Yunan County, Guangdong Province, China. On Sept. 18, we collected diseased samples from a wampee orchard with about 20% disease incidence. The infected fruit initially showed pinpoint spots on the peel, water-soaked lesions, and light to dark brown discoloration. Spots expanded in 2 days, and tissues collapsed after 5 days. Severely affected fruit showed cracking or nonodorous decay. Five diseased samples were collected, and causal agents were isolated from symptomatic tissues 1 cm under the peel after surface sterilization in 0.3% NaOCl for 10 min and rinsing in sterile water three times. Tissues were placed on a Luria Bertani (LB) plate for culture. Ten representative isolates were selected for further characterization. No colony was isolated from healthy tissues. Colonies were round, smooth, with irregular edges, and produced a yellow pigment in culture. Biolog identification (Version 4.20.05) showed that all strains were gram negative, negative for indole production, and utilized glucose, maltose, trehalose, sucrose, D-lactose, and pectin but not sorbitol or gelatin. The isolates were identified as Pantoea agglomerans (SIM 0.69). Multilocus sequence analysis (MLSA) was conducted for rapid classification of the strains. Sequences of atpD, gyrB, infB, and rpoB were amplified using corresponding primers (2). All sequences of the 10 isolates were identical in each gene. BLASTn was performed, and maximum likelihood trees based on the concatenated nucleotide sequences of the four genes were constructed using MEGA6. Bootstrap values after 1,000 replicates were expressed as percentages. Results showed that the tested strain named CL1 was most homologous to P. anthophila, with 98% identity for atpD (KM521543), 100% for gyrB (KM521544), infB (KM521545), and rpoB (KM521546). The 16S rRNA sequence (KM521542) amplified by primers 27f and 1492r shared 99% identity with that of P. anthophila M19_2C (JN644500). P. anthophila was previously reclassified from P. agglomerans (3); therefore, we suggest naming this wampee pathogen P. anthophila. Subsequently, 10 wampee fruits were injected with 20 μl of bacterial suspension (1 × 108 CFU/ml) of strains CL1 and CL2, respectively, and another 10 were injected with 20 μl of LB medium as controls, all kept at 28°C for 4 days. Symptoms similar to those of natural infections were observed on inoculated fruits but not on the negative controls. Bacteria were isolated from diseased tissues and further identified as P. anthophila by gyrB sequencing. P. anthophila was reported to naturally infect balsam and marigold (1,2). To our knowledge, this is the first report of P. anthophila naturally causing soft rot disease and cracking on C. lansium (wampee). References: (1) C. Brady et al. Syst. Appl. Microbiol. 31:447, 2008. (2) C. Brady et al. Int. J. Syst. Evol. Microbiol. 59:2339, 2009. (3) J. Morton. Fruits of Warm Climates. Echo Point Books & Media, Miami, FL, 1987.

Matched MeSH terms: Gelatin
First Report of Soft Rot Disease Caused by Pectobacterium wasabiae on Sweet Potato, Tomato, and Eggplant in Malaysia

Golkhandan E, Kamaruzaman S, Sariah M, Abidin MAZ, Nazerian E, Yassoralipour A

Plant Dis, 2013 May;97(5):685.
PMID: 30722205 DOI: 10.1094/PDIS-08-12-0759-PDN

In August 2011, sweet potato (Ipomoea batatas), tomato (Solanum lycopersicum), and eggplant (S. melongena) crops from major growing areas of the Cameron highlands and Johor state in Malaysia were affected by a soft rot disease. Disease incidence exceeded 80, 75, and 65% in severely infected fields and greenhouses of sweet potato, tomato, and eggplant, respectively. The disease was characterized by dark and small water-soaked lesions or soft rot symptoms on sweet potato tubers, tomato stems, and eggplant fruits. In addition, extensive discoloration of vascular tissues, stem hollowness, and water-soaked, soft, dark green lesions that turned brown with age were observed on the stem of tomato and eggplant. A survey was performed in these growing areas and 22 isolates of the pathogen were obtained from sweet potato (12 isolates), tomato (6 isolates), and eggplant (4 isolates) on nutrient agar (NA) and eosin methylene blue (EMB) (4). The cultures were incubated at 27°C for 2 days and colonies that were emerald green on EMB or white to gray on NA were selected for further studies. All bacterial cultures isolated from the survey exhibited pectolytic ability on potato slices. These bacterial isolates were gram negative; rod shaped; N-acetylglucosaminyl transferase, gelatin liquefaction, and OPNG positive; and were also positive for acid production from D-galactose, lactosemelibiose, raffinose, citrate, and trehalose. They were negative for indol production, phosphatase activity, reducing substances from sucrose, and negative for acid production from maltose, sorbitol, inositol, inolin, melezitose, α-mathyl-D-glocoside, and D-arabitol. The bacteria did not grow on NA at 37°C. Based on these biochemical and morphological assays, the pathogen was identified as Pectobacterium wasabiae (2). In addition, DNA was extracted and PCR assay with two primers (16SF1 and 16SR1) was performed (4). Partial sequences of 16S rRNA (GenBank Accession Nos. JQ665714, JX494234, and JX513960) of sweet potato, tomato, and eggplant, respectively, exhibited a 99% identity with P. wasabiae strain SR91 (NR_026047 and NR_026047.1). A pathogenicity assay was carried out on sweet potato tubers (cv. Oren), tomato stems (cv. 152177-A), and eggplant fruits (cv. 125066x) with 4 randomly representative isolates obtained from each crop. Sweet potato tubers, tomato stems, and eggplant fruits (4 replications) were sanitized in 70% ethyl alcohol for 30 s, washed and rinsed in sterile distilled water, and needle punctured with a bacterial suspension at a concentration of 108 CFU/ml. Inoculated tubers, stems, and fruits were incubated in a moist chamber at 90 to 100% RH for 72 h at 25°C when lesions were measured. All inoculated tubers, stems, and fruits exhibited soft rot symptoms after 72 h similar to those observed in the fields and greenhouses and the same bacteria were consistently reisolated. Symptoms were not observed on controls. The pathogenicty test was repeated with similar results. P. wasabiae have been previously reported to cause soft rot on Japanese horseradish (3), and aerial stem rot on potato in New Zealand (4), the U.S. (2), and Iran (1). To our knowledge, this is the first report of sweet potato, tomato, and eggplant soft rot caused by P. wasabiae in Malaysia. References: (1) S. Baghaee-Ravari et al. Eur. J. Plant Pathol. 129:413, 2011. (2) S. De Boer and A. Kelman. Page 56 in: Laboratory Guide for Identification of Plant Pathogenic Bacteria, 3rd ed. N. Schaad et al., eds. APS Press, St. Paul, 2001. (3) M. Goto et al. Int. J. Syst. Bacteriol. 37:130, 1987. (4) A. R. Pitman et al. Eur. J. Plant Pathol. 126:423, 2010.

Matched MeSH terms: Gelatin
First Report of Pectobacterium wasabiae Causing Soft Rot of Cabbage in Malaysia

Golkhandan E, Sijam K, Meon S, Ahmad ZAM, Nasehi A, Nazerian E

Plant Dis, 2013 Aug;97(8):1110.
PMID: 30722504 DOI: 10.1094/PDIS-01-13-0112-PDN

Soft rot of cabbage (Brassica rapa) occurs sporadically in Malaysia, causing economic damage under the hot and wet Malaysian weather conditions that are suitable for disease development. In June 2011, 27 soft rotting bacteria were isolated from cabbage plants growing in the Cameron Highlands and Johor State in Malaysia where the economic losses exceeded 50% in severely infected fields and greenhouses. Five independent strains were initially identified as Pectobacterium wasabiae based on their inability to grow at 37°C, and elicit hypersensitive reaction (HR) on Nicotiana tabaccum and their ability to utilize raffinose and lactose. These bacterial strains were gram-negative, rod-shaped, N-acetylglucosaminyl transferase, gelatin liquefaction, and OPNG-positive and positive for acid production from D-galactose, lactosemelibiose, raffinose, citrate, and trehalose. All strains were negative for indole production, phosphatase activity, reducing sucrose, and negative for acid production from maltose, sorbitol, inositol, inolin, melezitose, α-methyl-D-glucoside, and D-arabitol. All the strains exhibited pectolytic activity on potato slices. PCR assays were conducted to distinguish P. wasabiae from P. carotovorum subsp. brasiliensis, P. atrosepticum, and other Pectobacterium species using primers Br1f/L1r (2), Eca1f/Eca2r (1), and EXPCCF/EXPCCR, respectively. DNA from strains did not yield the expected amplicon with the Br1f/L1r and Eca1f/Eca2r, whereas a 550-bp amplicon typical of DNA from P. wasabiae was produced with primers EXPCCF/EXPCCR. ITS-RFLP using the restriction enzyme, Rsa I, produced similar patterns for the Malaysian strains and the P. wasabiae type strain (SCRI488), but differentiated it from P. carotovora subsp. carotovora, P. atrosepticum, P. carotovorum subsp. brasiliensis, and Dickeya chrysanthemi type strains. BLAST analysis of the 16S rRNA DNA sequence (GenBank Accession No. KC445633) showed 99% identity to the 16S rRNA of Pw WPP163. Phylogenetic reconstruction using concatenated DNA sequences of mdh and gapA from P. wasabiae Cc6 (KC484657) and other related taxa (4) clustered Malaysian P. wasabiae strains with P. wasabiae SCRI488, readily distinguishing it from other closely related species of Pectobacterium. Pathogenicity assays were conducted on leaves and stems of four mature cabbage plants for each strain (var. oleifera) by injecting 10 μl of a bacterial suspension (108 CFU/ml) into either stems or leaves, and incubating them in a moist chamber at 80 to 90% relative humidity at 30°C. Water-soaked lesions similar to those observed in the fields and greenhouses were observed 72 h after injection and bacteria with similar characteristics were consistently reisolated. Symptoms were not observed on water-inoculated controls. The pathogenicity test was repeated with similar results. P. wasabiae was previously reported to cause soft rot of horseradish in Japan (3). However, to our knowledge, this is the first report of P. wasabiae infecting cabbage in Malaysia. References: (1) S. H. De Boer and L. J. Ward. Phytopathology 85:854, 1995. (2) V. Duarte et al. J. Appl. Microbiol. 96:535, 2004. (3) M. Goto and K. Matsumoto. Int. J. Syst. Bacteriol. 37:130, 1987. (4) B. Ma et al. Phytopathology 97:1150, 2007.

Matched MeSH terms: Gelatin
Fulltext Functional Hydrophilic Membrane for Oil-Water Separation Based on Modified Bio-Based Chitosan-Gelatin

Zakuwan SZ, Ahmad I, Abu Tahrim N, Mohamed F

Polymers (Basel), 2021 Apr 06;13(7).
PMID: 33917600 DOI: 10.3390/polym13071176

In this study, we fabricated a modified biomaterial based on chitosan and gelatin, which is an intrinsic hydrophilic membrane for oil-water separation to clean water contamination by oil. Modification of the membrane with a non-toxic natural crosslinker, genipin, significantly enhanced the stability of the biopolymer membrane in a water-based medium towards an eco-friendly environment. The effects of various compositions of genipin-crosslinked chitosan-gelatin membrane on the rheological properties, thermal stability, and morphological structure of the membrane were investigated using a dynamic rotational rheometer, thermogravimetry analysis, and chemical composition by attenuated total reflectance spectroscopy (ATR). Modified chitosan-gelatin membrane showed completely miscible blends, as determined by field-emission scanning electron microscopy, differential scanning calorimetry, and ATR. Morphological results showed membrane with establish microstructure to further experiment as filtration product. The membranes were successfully tested for their oil-water separation efficiencies. The membrane proved to be selective and effective in separating water from an oil-water mixture. The optimum results achieved a stable microporous structure of the membrane (microfiltration) and a separation efficiency of above 98%. The membrane showed a high permeation flux, generated as high as 698 and 420 L m-2 h-1 for cooking and crude oils, respectively. Owing to its outstanding recyclability and anti-fouling performance, the membrane can be washed away easily, ensuring the reusability of the prepared membrane.

Matched MeSH terms: Gelatin
Fulltext Microwave-assisted Preparation of Cross-linked Gelatin-Paracetamol Matrices: Optimization Using the D-optimal Design

Kuang TK, Kang YB, Segarra I, Kanwal U, Ahsan M, Bukhari NI

Turk J Pharm Sci, 2021 04 20;18(2):167-175.
PMID: 33902255 DOI: 10.4274/tjps.galenos.2020.48902

Objectives: This study was conducted to assess the effect of microwave heating on the preparation of paracetamol cross-linked gelatin matrices by using the design of experiment (DoE) approach and explore the influence of the duration of microwave irradiation, the concentrations of crosslinker, and the amount of sodium bicarbonate (salt) on paracetamol release. These parameters were also compared with those of the matrices prepared via conventional heating.
Materials and Methods: Twenty gel matrices were prepared with different durations of microwave irradiation, amounts of maize, and concentrations of sodium bicarbonate as suggested by Design Expert (DX®). The percentage drug release, the coefficient of variance (CV) in release, and the mean dissolution time (MDT) were the properties explored in the designed experimentation.
Results: Target responses were dependent on microwave irradiation time, cross-linker amount, and salt concentration. Classical and microwave heating did not demonstrate statistically significant difference in modifying the percentage of drug released from the matrices. However, the CVs of microwave-assisted formulations were lower than those of the gel matrices prepared via classical heating. Thus, microwave heating produced lesser variations in drug release. The optimized gel matrices demonstrated that the observed percentage of drug release, CV, and MDT were within the prediction interval generated by DX®. The release mechanism of the matrix formulations followed the Peppas-Korsmeyer anomalous transport model.
Conclusion: The DoE-supported microwave-assisted approach could be applied to optimize the critical factors of drug release with less variation.

Matched MeSH terms: Gelatin
Fulltext Characterisation of biodegradable protein based films from gelatin alternative: a review

Nazmi, N. N. M., Isa, M. I. N., Sarbon, N. M.

International Food Research Journal, 2020;27(6):971-987.
MyJurnal

Protein-based films are thin and flexible films derived from protein sources. They are
completely biodegradable and used in food engineering, packaging, drug recovery, and other
applications. In food packaging, gelatin is widely used due to properties such as low cost,
availability, functional attributes, mechanical (flexibility and tension) and optical (brightness
and opacity) strength, barrier against gas flow, and structural resistance to water and
microorganisms. Therefore, this paper reviews the characterisation of biodegradable
protein-based films from gelatin alternatives, mainly from fish and chicken skin, as food
packaging materials. The properties of film packaging derived from gelatin alternatives were
compared with films derived from mammalian gelatin. The findings showed that the blended
gelatin alternatives with polysaccharide improved physical properties such as water vapour
permeability, gas permeability, light transmission and transparency, thermal properties,
microstructure, colour, and heat sealability. Moreover, improvements in mechanical
properties such as tensile strength and elongation at break were also investigated. This review
also comes out with suggestions for future research on the compatibility between gelatin films
and food ingredients. This paper provides a comprehensive overview that promotes the
development of biodegradable blended films from gelatin alternatives for packaging
applications in the food industry and related fields.

Matched MeSH terms: Gelatin
Fulltext Chicken gelatin films: rheological properties of film forming solutions and film characterisation as influenced by starch incorporation

Cheng, S. H., Sarbon, N. M.

International Food Research Journal, 2020;27(6):1094-1104.
MyJurnal

The aim of the present work was to develop chicken skin gelatin films incorporated with
different concentrations of rice starch prepared by casting techniques. Six film-forming
solutions were prepared separately with different blend ratios of chicken skin gelatin to rice
starch: A (0/100), B (5/100), C (10/100), D (15/100), E (20/100), and F (25/100). The
rheological properties of the film-forming solutions (FFS) were determined using frequency
sweep. The mechanical and physical properties of the respective films were also evaluated.
With the increase in rice starch concentration, the storage (G’) modulus of FFS increased
dramatically with loss (G”) modulus as the oscillatory frequency rising to contribute to gel
behaviour (G’ > G”). As rice starch concentration increased, the chicken skin gelatin films
also demonstrated higher tensile strength, elongation at break, and water vapour permeability,
but reduced the solubility of gelatin films in water. Additionally, elevation in melting point
values indicated that the thermal stability of the composite films was enhanced with the
increment of rice starch concentration. Film F (with 25% rice starch) yielded the optimal film
formulation, as it had the highest tensile strength and a high elongation at break value. Thus,
film F shows the best potential as a film for food packaging.

Matched MeSH terms: Gelatin
Fulltext Role of organic and ceramic biomaterials on bone healing and regeneration: An experimental study with significant value in translational tissue engineering and regenerative medicine

Moshiri A, Tekyieh Maroof N, Mohammad Sharifi A

Iran J Basic Med Sci, 2020 Nov;23(11):1426-1438.
PMID: 33235700 DOI: 10.22038/ijbms.2020.46228.10707

Objectives: We investigated the role of various biomaterials on cell viability and in healing of an experimentally induced femoral bone hole model in rats.
Materials and Methods: Cell viability and cytotoxicity of gelatin (Gel; 50 µg/µl), chitosan (Chi; 20 µg/µl), hydroxyapatite (HA; 50 µg/µl), nanohydroxyapatite (nHA; 10 µg/µl), three-calcium phosphate (TCP; 50 µg/µl) and strontium carbonate (Sr; 10 µg/µl) were evaluated on hADSCs via MTT assay. In vivo femoral drill-bone hole model was produced in rats that were either left untreated or treated with autograft, Gel, Chi, HA, nHA, TCP and Sr, respectively. The animals were euthanized after 30 days. Their bone holes were evaluated by gross-pathology, histopathology, SEM and radiography. Also, their dry matter, bone ash and mineral density were measured.
Results: Both the Gel and Chi showed cytotoxicity, while nHA had no role on cytotoxicity and cell-viability. All the HA, TCP and Sr significantly improved cell viability when compared to controls (P<0.05). Both the Gel and Chi had no role on osteoconduction and osteoinduction. Compared to HA, nHA showed superior role in increasing new bone formation, mineral density and ash (P<0.05). In contrast to HA and nHA, both the TCP and Sr showed superior morphological, radiographical and biochemical properties on bone healing (P<0.05). TCP and Sr showed the most effective osteoconduction and osteoinduction, respectively. In the Sr group, the most mature type of osteons formed.
Conclusion: Various biomaterials have different in vivo efficacy during bone regeneration. TCP was found to be the best material for osteoconduction and Sr for osteoinduction.

Matched MeSH terms: Gelatin
Gene expression of microbial gelatinase activity for porcine gelatine identification

Shahimi S, Lamri MF, Abd Mutalib S, Mohd Khalid R, Md Tab M, Khairuddin F

Food Chem, 2021 Sep 01;355:129586.
PMID: 33773458 DOI: 10.1016/j.foodchem.2021.129586

In order to invent a porcine gelatine detection device using microbial resources, bacterial enzymes with a preference towards porcine gelatine and their candidate genes were evaluated. Five (n = 5) bacterial strains isolated from hot spring water and wet clay, Malaysia were screened for their gelatinase activity. The gelatinase enzyme was extracted and purified using ammonium sulphate precipitation prior to performing gelatinase assay on porcine, bovine and fish gelatine medium substrates. The G2 strain or Enterobacter aerogenes (Strain EA1) was selected for whole genome sequenced after showing a consistent trend of preference towards porcine gelatine. The gelatinase candidate gene gelEA1_9 was cloned and expressed. Based on one-way analysis of variance (ANOVA) with POST-HOC Duncan test (α = 0.05), the final product of gelEA1_9 was identified as a novel gelatinase. This gelatinase presented no significant difference in activity towards porcine gelatine. Hence, the present study demonstrated an enzyme-substrate interaction for porcine gelatine identification.

Matched MeSH terms: Gelatin; Gelatinases
MECHANICAL AND PHYSICAL PROPERTIES OF BIO-NANOCOMPOSITE FILMS BASED ON CHICKEN SKIN GELATIN WITH DIFFERENT CONCENTRATION OF CHITOSAN NANOPARTICLES

GUI CHAN LEE, NORIZAH MHD. SARBON

UMT Journal of Undergraduate Research, 2019;2(3):1-14.
MyJurnal

Plastics packaging is non-biodegradable and risks to human health and environmental pollution. In contrast, gelatin-based film lack of desired mechanical, thermal and water vapour barrier properties. Thus, this study aimed to investigate the mechanical and physical properties of bio-nanocomposite films based on chicken skin gelatin with different concentration of chitosan nanoparticles (CSNPs). Gelatin/CSNPs film solutions with different CSNPs concentration (0-8%, w/w) were stirred at 45oC for 30 min and oven-dried at 45oC. Film characterization determination includes tensile strength (TS), elongation at break (EAB), Young’s modulus (YM), water solubility, water vapour permeability (WVP), film morphology and melting temperature (Tm). Results of the study indicated that incorporation of CSNPs significantly influenced film properties. The addition of CSNPs increased the TS and YM value, which lead to stronger films than the pure chicken skin gelatin films. However the addition of CSNPs decreased the EAB value. Furthermore, WVP and water solubility significantly decreased (p < 0.05) by the addition of 6% CSNPs. Morphology images showed that increased CSNPs reduced the film’s amorphous character, especially in high level, in which higher CSNPs (8%) resulted in the aggregation of particles in the composites. The nano-reinforcement films showed higher thermal stability as compared to pure chicken skin gelatin films. In conclusion, the film with 6% CSNPs showed the best formulation, as it demonstrated high in TS, YM and Tm value, while low in EAB, water solubility and WVP value compared to other films. The results presented in this study showed the feasibility of using bio-nanocomposite technology to improve the properties of biopolymer films based on chicken skin gelatin.

Matched MeSH terms: Gelatin
Fulltext A fuzzy graph approach analysis for COVID-19 outbreak

Hassan N, Ahmad T, Ashaari A, Awang SR, Mamat SS, Wan Mohamad WM, et al.

Results Phys, 2021 Jun;25:104267.
PMID: 33968605 DOI: 10.1016/j.rinp.2021.104267

Complex systems require rigorous analysis using effective method, in order to handle and interpret their information. Spectrum produced from Fourier transform infrared (FTIR) instrument is an example of a complex system, due to their overlapped bands and interactions within the spectrum. Thus, chemometrics techniques are required to further analyze the data, in particular, chemometrics fuzzy autocatalytic set (c-FACS). The c-FACS is initially used to analyze the FTIR spectra of gelatins. However, in this study, the c-FACS is generalized and implemented for analysis of Coronavirus disease 2019 (Covid-19), particularly, the pandemic outbreak in Malaysia. The daily Covid-19 cases in states in Malaysia are modeled and analyzed using c-FACS, to observe the trend and severity of the disease in Malaysia. As a result, the classification of severity of zones in Malaysia are identified. The obtained results offer descriptive insight for strategizing purposes in combating the Covid-19 outbreak in Malaysia.

Matched MeSH terms: Gelatin
Fulltext Glycaemic index of eight types of commercial rice in Malaysia

Mohd Yusof BN, Abdul Talib R, Abdul Karim N

Malays J Nutr, 2005;11(2):151-163.
MyJurnal

This experimental study was carried out to investigate the effect of eight types of commercial rice in Malaysia on blood glucose response and to determine their glycaemic index (GI) values. Ten healthy Malay volunteers (7 males, 3 females, BMI=23.6kgm-2, age=25.1years) participated in this study. The eight types of rice tested were three high fibre rice (HFR A, HFR B & HFR C), three white rice (WR D, WR E and WR F) and two fragrant rice (FR G and FR H). The subjects were required to go through the study protocol on eleven separate occasions (eight tests for the test rice samples and three repeated tests for the reference food) after an overnight fasting. Capillary blood samples were taken immediately before (0min) and 15, 30, 45, 60, 90 and 120min after consumption of the test foods. The blood glucose response was obtained by calculating the incremental area under the curve (iAUC). The GI was determined according to the standardised methodology. This study showed that out of eight types of rice tested, three (HFR B, WR E and WR F) could be categorised as having intermediate GI while the remaining five were considered high GI foods (HFR A, HFR C, WR D, FR G and FR H). The GI of HFR B (60 Â± 5.8) and WR E (61 Â± 5.8) were significantly lower than the reference food (glucose; GI=100) (p0.05). The GI value of the rice tested in descending order were HFR C, 87 Â± 9.0 followed by HFR A (81 Â± 6.7), FR G (80 Â± 5.5), FR H (79 Â± 7.6), WR D (72 Â± 8.5), WR F (69 Â± 8.3), WR E (61 Â± 5.8) and HFR B (60 Â± 5.8). There was no relationship between the dietary fibre content of the rice with the iAUC (r= -0.05, p=0.63) and GI values (r= -0.08, p=0.46). This shows that the GI values of the test rice were independent of the dietary fibre content of the rice. Other factors that may influence the GI value of rice include amylose content, gelatinisation process and botanical sources. The results of this study will provide useful information for dietitians and nutritionists in selecting the appropriate type of rice for the daily diet of diabetics.

Matched MeSH terms: Gelatin
Fulltext Effect of ribose-induced Maillard reaction on physical and mechanical properties of bovine gelatin films prepared by oven drying

Samira, S., Thuan-Chew Tan, T.C., Azhar, M.E.

International Food Research Journal, 2014;21(1):269-276.
MyJurnal

The effect of ribose-induced Maillard reaction on the physical and mechanical properties of gelatin films was investigated. Bovine gelatin solution (5 g/100 mL) containing glycerol and sorbitol (1:1) was mixed with 20% (R20), 40% ribose (R40), or 40% sucrose (S40) (weight % is based on gelatin dry weight) followed by heating (90ºC, 2 h) and oven drying to produce dried gelatin films. R20 and R40 films were brownish in color with lower light transparency, while CF (control film; without sugars) and S40 were colorless and had higher transparency. Tensile strength and Young Modulus values of the films were in the order; CF > R20 > R40 > S40, while elongation at break was in the order; R40 > S40 > R20 > CF. Water solubility and swelling percentages of the films were in the order; CF > S40 > R20 > R40, indicating the occurrence of insoluble “Maillard complexes” within R20 and R40 films. R20 and R40 films showed maximum light absorption at wavelength of 200 − 350 nm, whilst S40 and CF showed maximum absorbance at 200 − 250 nm. The addition of ribose yielded gelatin films with increased protection against UV light, even though the presence of sugars might had disrupted the inter connection of junction zones and decrease in mechanical properties. Occurrence of the Maillard reaction within R20 and R40 films could be the main reason for differences in physical and mechanical properties of films containing ribose that were formed from heated film-forming solutions.

Matched MeSH terms: Gelatin
Fulltext Physicochemical and structural properties of Asian Swamp Eel (Monopterus albus) skin gelatin as compared to bovine gelatin

Rosli, N., Sarbon, N.M.

International Food Research Journal, 2015;22(2):699-706.
MyJurnal

The aims of this study are to report on the extraction and characterization of Asian swamp eel (Monopterus albus) skin gelatin. The characterization conducted were includes chemical composition, pH, gel strength, viscosity, thermal property, color and structure determination of extracted eel skin gelatin. Eel skin contains 70.28% moisture, 11.07% protein, 4.21% fat, and 5.01% ash. The chemical composition of eel skin gelatin (yield of 12.75%) was 18.8% moisture, 67.64% protein, 0.34% fat and 1.08% ash, with a pH of 4.62 and gel strength of 215.96 g (± 9.62 g). Although viscosity (2.8 cPa/min) profile of eel skin gelatin showed lower than that of bovine gelatin, the higher melting temperature (35 °C) of eel skin gelatin indicating its higher stability than bovine gelatin with FTIR spectrum similar to that of typical bovine gelatin. Eel skin gelatin has a 71.4 (± 1.14), a +3.2 (± 0.29), and a +7.52 (± 0.29) for L*, a* and b* value respectively, indicate a darker and less yellow colour. These findings show promising potential for the application of eel skin gelatin as an alternative to commercial gelatin.

Matched MeSH terms: Gelatin
Fulltext Differentiation of bovine and porcine gelatins in processed products via Sodium Dodecyl Sulphate-Polyacrylamide Gel Electrophoresis (SDS-PAGE) and principal component analysis (PCA) techniques

Nur Azira, T., Amin, I., Che Man, Y. B.

International Food Research Journal, 2012;19(3):1175-1180.
MyJurnal

Gelatin is widely used in food and pharmaceutical products. However, the addition of gelatin especially in food products becomes a controversial issue among Muslims due to its animal origin. Thus, the present study was aimed to detect and differentiate the origin of gelatin added in processed foods using a combination method of sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) and Principal Component Analysis (PCA). Porcine gelatin had exhibited 11 prominent polypeptides compared to bovine gelatin with 2 prominent polypeptides. Polypeptides of both gelatin sources at molecular weight ranged from 53 to 220 kDa can be used to differentiate between porcine and bovine gelatins using PCA. The efficiency in extracting gelatin from processed foods by different solutions was also evaluated. Extraction of gelatin in processed foods by cold acetone and deionised water had exhibited a similar polypeptide patterns, suggesting both solutions are suitable. The study indicated that approach of a simple gelatin extraction combined with SDS-PAGE and PCA, may provide robust information for gelatin species differentiation of processed foods.

Matched MeSH terms: Gelatin
Fulltext Physicochemical, pasting and gel textural properties of wheat-ripe Cavendish banana composite flours

Ng, K. F., Abbas, F. M. A., Tan, T. C., Azhar, M. E.

International Food Research Journal, 2014;21(2):655-662.
MyJurnal

Proximate composition, pH and amylose content of ripe Cavendish banana flour (RBF) prepared in this study were compared with all-purpose wheat flour (WF). RBF was found to be significantly (P < 0.05) higher in total carbohydrates and minerals content, while significantly (P < 0.05) lower in protein and fat contents compared with those of WF. Wheat-ripe banana composite flours (W-RBF) prepared by partial substitution of WF with RBF were assessed for swelling power, solubility, pasting properties and gel textural properties. Granular swelling of RBF occurred at a higher temperature compared to that of WF, suggesting that more energy and water were required to cook WF-RBF as the presence of soluble carbohydrates would compete for water and this would eventually delay starch hydration and granular expansion during cooking. Higher substitution with RBF led to higher soluble carbohydrates content, and increase in solubility index of WF-RBF. Partial substitution with RBF also resulted in significant (P < 0.05) decrease in pasting properties. A higher substitution of WF with RBF could reduce starch gelatinisation during cooking and retrogradation owing to the reduction of available starch in WF-RBF. All WF-RBF gels were significantly (P < 0.05) firmer and less sticky compared to WF gels.

Matched MeSH terms: Gelatin
Fulltext Effects of different drying methods on the rheological, functional and structural properties of chicken skin gelatin compared to bovine gelatin

Rasli, H.I., Sarbon, N.M.

International Food Research Journal, 2015;22(2):584-592.
MyJurnal

This study investigates effects from different drying methods (vacuum oven dried vs. freeze dried) on the rheological, functional and structural properties of chicken skin gelatin compared to bovine gelatin. Vacuum oven dried chicken skin samples showed a higher gelatin yield (12.86%) than freeze-dried samples (9.25%). The latter showed a higher melting temperature (32.64oC) and superior foaming capacity (176%) as well as foaming stability (166.67%). Vacuum oven dried samples demonstrated greater fat binding capacity (5.5 ml/g) and emulsion stability (55.79%). There were no significant differences (p >0.05) in emulsion and water holding capacity for three gelatins. Bovine gelatin did hold the lowest of all functional properties studied. A Fourier Transform Infrared (FTIR) spectrum analysis of chicken skin gelatin under both drying methods presented structures similar to those of bovine gelatin. Collectively, this findings indicated no significant differences (p >0.05) in rheological, functional and structural properties for chicken skin gelatins prepared by either drying method. Hence, to save costs and maintain gelatin quality, vacuum oven drying offers potential as an alternative means of production.

Matched MeSH terms: Gelatin
Fulltext Effects of extraction time on the functional properties of silver catfish (Pangasius sutchi) skin gelatin

Normah Ismail, Najihah Shukor, Zainal Samicho

Scientific Research Journal, 2013;10(1):0-0.
MyJurnal

Silver catfish (Pangasius sutchi) skin gelatin was extracted to determine the effects of extraction time on the functional properties of the gelatin in terms of solubility, protein solubility as a function of pH and sodium chloride concentration, emulsifying capacity and stability, water holding capacity, fat binding capacities and foaming properties. Silver catfish skins were washed in sodium chloride (NaCl) solution prior to pre-treatment in sodium hydroxide (NaOH) and acetic acid solution. Gelatin was extracted at 50ºC for 6, 8, 10 and 12 hours extraction time followed by freeze drying. The extraction of silver catfish skin gelatin at 50 ºC for 12 hours was more effective than extraction at 6, 8 and 10 hours where the gelatin was characterized by higher emulsifying capacity (52.63%), emulsifying stability (47.83%), water holding capacity (31.78 mL/g), fat binding capacities (54.76%), foaming capacity (41.47 mL) and foaming stability (56.42%) than gelatins extracted at other extraction time. The longer the extraction time, the better the functional properties of the gelatin. Based on its good functional properties, silver catfish skin gelatin may be useful in various food applications such as soups, sauces and gravies.

Matched MeSH terms: Gelatin
Fulltext Novel method for gelatin extraction of various local fish using High Pressure Processing (HPP)

Jamal, P., Jaswir, I., Yusof, N., Jami, M.S.

International Food Research Journal, 2017;24(101):533-539.
MyJurnal

Gelatin from fish skin is known to be an alternative source for mammalian gelatin. However, it has weaker properties compared to bovine and porcine gelatin, which limits its use in the industry. The conventional method for fish gelatin extraction requires long production time and could cause serious water pollution and chemical treatments are often being used to enhance the yield of fish gelatin and its properties but it may affect the amino acid content of the gelatin. In this regard, High-Pressure Processing (HPP) is a novel method suggested for fish gelatin extraction. The HPP method is classified as green technology as it requires low electricity throughout the process. This study will discuss the impact of HPP the technique gelatin extracted from fish skin. Skins from four types of fish, namely red tilapia (Oreochromis niloticus), black tilapia (Oreochromis mossambicus), grouper (Epinephelus areolatus) and threadfin bream (Nemipterus tambuloides), were used. High pressure was applied at either pretreatment in citric acid solution or during thermal extraction; and the pressure was maintained at 250 MPa with pressure holding time of 10 minutes and 18 hours of water extraction. Gelatin extract from traditional acid-base method was prepared as a standard for comparison. The study found that there was an increment in the yield of gelatin and the concentration of gelatin extract, and the pre-treatment time was also reduced.

Matched MeSH terms: Gelatin
Fulltext In vitro cytotoxicity and antibacterial activity of silver-coated electrospun polycaprolactone/gelatine nanofibrous scaffolds

Lim MM, Sultana N

3 Biotech, 2016 Dec;6(2):211.
PMID: 28330282 DOI: 10.1007/s13205-016-0531-6

The development of nano-sized scaffolds with antibacterial properties that mimic the architecture of tissue is one of the challenges in tissue engineering. In this study, polycaprolactone (PCL) and PCL/gelatine (Ge) (70:30) nanofibrous scaffolds were fabricated using a less toxic and common solvent, formic acid and an electrospinning technique. Nanofibrous scaffolds were coated with silver (Ag) in different concentrations of silver nitrate (AgNO3) aqueous solution (1.25, 2.5, 5, and 10 %) by using dipping method, drying and followed by ultraviolet (UV) photoreduction. The PCL/Ge (70:30) nanofibrous scaffold had an average fibre diameter of 155.60 ± 41.13 nm. Characterization showed that Ag was physically entrapped in both the PCL and PCL/Ge (70:30) nanofibrous scaffolds. Ag(+) ions release study was performed and showed much lesser release amount than the maximum toxic concentration of Ag(+) ions in human cells. Both scaffolds were non-toxic to cells and demonstrated antibacterial effects towards Gram-positive Bacillus cereus (B. cereus) and Gram-negative Escherichia coli (E. coli). The Ag/PCL/Ge (70:30) nanofibrous scaffold has potential for tissue engineering as it can protect wounds from bacterial infection and promote tissue regeneration.

Matched MeSH terms: Gelatin

Filters

Please provide feedback to Administrator ([email protected])

External Links