MyMedR

Displaying publications 941 - 960 of 1298 in total

Abstract:

Sort:

Fulltext Improving Vesicular Integrity and Antioxidant Activity of Novel Mixed Soy Lecithin-Based Liposomes Containing Squalene and Their Stability against UV Light

Toopkanloo SP, Tan TB, Abas F, Azam M, Nehdi IA, Tan CP

Molecules, 2020 Dec 11;25(24).
PMID: 33322600 DOI: 10.3390/molecules25245873

In order to improve the membrane lipophilicity and the affinity towards the environment of lipid bilayers, squalene (SQ) could be conjugated to phospholipids in the formation of liposomes. The effect of membrane composition and concentrations on the degradation of liposomes prepared via the extrusion method was investigated. Liposomes were prepared using a mixture of SQ, cholesterol (CH) and Tween80 (TW80). Based on the optimal conditions, liposome batches were prepared in the absence and presence of SQ. Their physicochemical and stability behavior were evaluated as a function of liposome constituent. From the optimization study, the liposomal formulation containing 5% (w/w) mixed soy lecithin (ML), 0.5% (w/w) SQ, 0.3% (w/w) CH and 0.75% (w/w) TW80 had optimal physicochemical properties and displayed a unilamellar structure. Liposome prepared using the optimal formulation had a low particle size (158.31 ± 2.96 nm) and acceptable %increase in the particle size (15.09% ± 3.76%) and %trolox equivalent antioxidant capacity (%TEAC) loss (35.69% ± 0.72%) against UV light treatment (280-320 nm) for 6 h. The interesting outcome of this research was the association of naturally occurring substance SQ for size reduction without the extra input of energy or mechanical procedures, and improvement of vesicle stability and antioxidant activity of ML-based liposome. This study also demonstrated that the presence of SQ in the membrane might increase the acyl chain dynamics and decrease the viscosity of the dispersion, thereby limiting long-term stability of the liposome.

Matched MeSH terms: Microscopy, Electron, Transmission
Fulltext Optical and Photoacoustic Properties of Laser-Ablated Silver Nanoparticles in a Carbon Dots Solution

Sadrolhosseini AR, Krishnan G, Shafie S, Abdul Rashid S, Wadi Harun S

Molecules, 2020 Dec 09;25(24).
PMID: 33316885 DOI: 10.3390/molecules25245798

This study used the carbon dots solution for the laser ablation technique to fabricate silver nanoparticles. The ablation time range was from 5 min to 20 min. Analytical methods, including Fourier transform infrared spectroscopy (FTIR), UV-visible spectroscopy, transmission electron microscopy, and Raman spectroscopy were used to categorize the prepared samples. The UV-visible and z-scan techniques provided optical parameters such as linear and nonlinear refractive indices in the range of 1.56759 to 1.81288 and 7.3769 × 10-10 cm2 W-1 to 9.5269 × 10-10 cm2 W-1 and the nonlinear susceptibility was measured in the range of 5.46 × 10-8 to 6.97 × 10-8 esu. The thermal effusivity of prepared samples, which were measured using the photoacoustic technique, were in the range of 0.0941 W s1/2 cm-2 K-1 to 0.8491 W s1/2 cm-2 K-1. The interaction of the prepared sample with fluoride was investigated using a Raman spectrometer. Consequently, the intensity of the Raman signal decreased with the increasing concentration of fluoride, and the detection limit is about 0.1 ppm.

Matched MeSH terms: Microscopy, Electron, Transmission
Pharmacological evaluation of poly(3-methylthiophene) and its titanium(IV)phosphate nanocomposite: DNA interaction, molecular docking, and cytotoxic activity

Baig U, Gondal MA, Alam MF, Wani WA, Younus H

J. Photochem. Photobiol. B, Biol., 2016 Nov;164:244-255.
PMID: 27710872 DOI: 10.1016/j.jphotobiol.2016.09.034

Cancer and pathogenic microbial diseases have terribly affected human health over a longer period of time. In response to the increasing casualties due to cancer and microbial diseases, unique poly(3-methylthiophene) and poly(3-methylthiophene)-titanium(IV)phosphate composite were prepared via in-situ oxidative chemical polymerization in this work. The poly(3-methylthiophene) and poly(3-methylthiophene)-titanium(IV)phosphate composite were well characterized by Fourier transform infrared spectroscopy and field emission scanning electron microscopy. DNA binding studies by UV-Visible and fluorescence spectroscopic investigations indicated strong binding affinities of poly(3-methylthiophene) and poly(3-methylthiophene)-titanium(IV)phosphate nanocomposite; leading to structural damage of DNA. Poly(3-methylthiophene)-titanium(IV)phosphate nanocomposite showed stronger interactions with DNA as compared to poly(3-methylthiophene) and from dye displacement assay it was confirmed that mode of binding of both the formulations was intercalative. The antimicrobial screening revealed that polymer and its composite displayed stronger antibacterial effects than ampicillin against Bacillus subtilis, Staphylococcus aureus, Pseudomonas aeruginosa and Salmonella typhimurium. Besides, the poly(3-methylthiophene) and poly(3-methylthiophene)-titanium(IV)phosphate nanocomposite showed dose dependent effects towards estrogen receptor positive breast cancer (MCF-7) and estrogen receptor negative breast cancer (MDA-MB-231) cell lines; with poly(3-methylthiophene)-titanium(IV)phosphate nanocomposite showing better activities against both cell lines. In all in-vitro biological investigations, poly(3-methylthiophene)-titanium(IV)phosphate composite showed superior properties to that of the pure poly(3-methylthiophene), which encouraged us to suggest its potential as future therapeutic gear in drug delivery and other allied fields.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Electrical conductivity of anionic surfactant-doped polypyrrole nanoparticles prepared via emulsion polymerization

Ghalib, H., Abdullah, I., Daik, R.

Pertanika Journal of Science & Technology, 2013;21(2):459-472.
MyJurnal

Conducting polypyrrole (PPy) nanoparticles were synthesized by chemical oxidative polymerization of pyrrole in aqueous solution containing ferric sulfate (Fe2(SO4)3), anionic surfactants (sodium dodecylbenzene-sulfonate (NaDBS) or sodium dodecyl sulfate (SDS)), 1-pentanol as the oxidant, dopant and co-emulsifier, respectively. The polymerization was carried out at 0 ºC and 25 ºC. Fourier transform infrared spectroscopy (FTIR) and elemental analysis indicated that anionic surfactants were successfully incorporated into the PPy backbone. Incorporation of anionic surfactants caused enhanced electrical conductivity, increased yield, decreased the size of particles as well as improved the thermal stability of the resultant PPy. The presence of anionic surfactant seems to inhibit undesirable side reactions so as to improve the regularity of the PPy backbone. Globular PPy particles were obtained with diameter ranged from 40 to 118 nm as revealed by field emission scanning electron microscopy (FE-SEM) and conductivity of 7.89×10-4 –2.35×10-2 S cm-1, as measured using impedance analyzer. It was found that polymerization at low temperature (0 ºC) produced PPy particles with smaller size and higher conductivity. The sodium dodecyl sulfate-doped PPy (SDS-doped PPy) exhibited higher conductivity than that of the sodium dodecylbenzenesulfonate-doped PPy (NaDBS-doped PPy), due to the bulkiness of NaDBS as compared to SDS.

Matched MeSH terms: Microscopy, Electron, Scanning
High diversity of Pseudo-nitzschia along the northern coast of Sarawak (Malaysian Borneo), with descriptions of P. bipertita sp. nov. and P. limii sp. nov. (Bacillariophyceae)

Teng ST, Tan SN, Lim HC, Dao VH, Bates SS, Leaw CP

J Phycol, 2016 12;52(6):973-989.
PMID: 27403749 DOI: 10.1111/jpy.12448

Forty-eight isolates of Pseudo-nitzschia species were established from the Miri coast of Sarawak (Malaysian Borneo) and underwent TEM observation and molecular characterization. Ten species were found: P. abrensis, P. batesiana, P. fukuyoi, P. kodamae, P. lundholmiae, P. multistriata, P. pungens, P. subfraudulenta, as well as two additional new morphotypes, herein designated as P. bipertita sp. nov. and P. limii sp. nov. This is the first report of P. abrensis, P. batesiana, P. kodamae, P. fukuyoi, and P. lundholmiae in coastal waters of Malaysian Borneo. Pseudo-nitzschia bipertita differs from its congeners by the number of sectors that divide the poroids, densities of band striae, and its cingular band structure. Pseudo-nitzschia limii, a pseudo-cryptic species in the P. pseudodelicatissima complex sensu lato, is distinct by having wider proximal and distal mantles, a higher number of striae, and greater poroid height in the striae of the valvocopula. The species were further supported by the phylogenetic reconstructions of the nuclear-encoded large subunit ribosomal gene and the second internal transcribed spacer. Phylogenetically, P. bipertita clustered with its sister taxa (P. subpacifica + P. heimii); P. limii appears as a sister taxon to P. kodamae and P. hasleana in the ITS2 tree. Pairwise comparison of ITS2 transcripts with its closest relatives revealed the presence of both hemi- and compensatory base changes. Toxicity analysis showed detectable levels of domoic acid in P. abrensis, P. batesiana, P. lundholmiae, and P. subfraudulenta, but both new species tested below the detection limit.

Matched MeSH terms: Microscopy, Electron, Transmission
Fulltext Synthesis of silica fine particle by the addition of a non-ionic surfactant

Mohd Nazri Idris, Hazizan Md. Akil, Zainal Arifin Ahmad

Journal of Nuclear and Related Technologies, 2007;2005(1):29-33.
MyJurnal

Sodium silicate was used to synthesize silica fine particles at room temperature using non-ionic surfactant of triethanolamine (TEA), dissolution salt and precipitating agent. The experiments were conducted by different composition of precursor material, nonionic surfactant and dissolution salt concentrations through the sol-gel process. Various particle sizes in the range 100-300nm were synthesized. The particle size of silica powders were analyzed via Field Emission Scanning Electron Microscope (FESEM), Energy Dispersive X-ray Analysis (EDAX), X-Ray Fluorescence (XRF), and Fourier Transformation Infrared (FTIR). The result has demonstrated that the particle size can be controlled by changing the ratio of non-ionic surfactant and dissolution salt or the sodium silicate concentration.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Effect of orange sweet potato (Ipomoea batatas) flour on the physical properties of fried extruded fish crackers

Cheow, C.S., Noorakmar, A.W., Norizzah, A.R., Mohd Zahid, A., Ruzaina, I.

International Food Research Journal, 2012;19(2):657-664.
MyJurnal

The effects of orange sweet potato flour addition to tapioca starch on the expansion, oil absorption,
bulk density, water absorption index (WAI), water solubility index (WSI), hardness and colour of fried extruded fish crackers were investigated. The microstructure properties were assessed by Field Emission Scanning Electron Microscope (FESEM) and the sensory properties of fried extruded fish crackers were determined by quantitative descriptive analysis method. The shape and texture of the product were similar to that of normal breakfast cereal. Light brownish and slightly harder texture was obtained with addition of orange sweet potato flour to tapioca starch in the fried extruded fish crackers. The bulk density and water solubility index (WSI) increased with the increase in orange sweet potato flour addition. However, water absorption index (WAI), linear expansion, expansion ratio, volume expansion and oil absorption decreased as the amount of orange sweet potato increased. The microstructure studies revealed that fried extruded fish crackers with high percentage of orange sweet potato flour had small air cells and thick cell wall. The fried extruded fish crackers with 30% fish, 14% orange sweet potato flour and 56% tapioca starch had high crispiness score and accepted by the trained panellists.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Synthesis and physicochemical analysis of polystyrene-anchored pd(II) metal complex

Siti Kamilah Che Soh, Siti Aminah Jusoh, Mustaffa Shamsuddin

Scientific Research Journal, 2014;11(2):0-0.
MyJurnal

A polystyrene (PS)-anchored Pd(II) metal complex was synthesized on cross-linked polymer by heating a mixture of chlorometylated polystyrene with phenyldithiocarbazate and carbon disulfide in the presence of potassium hydroxide (KOH) in dimethylformamide (DMF). The reaction mixture was heated at 80 °C to form the corresponding phenyldithiocarbazate-functionalized polymer. Then, it was treated with bis(benzonitrile)palladium(II) chloride. The properties of dark colored polymer, impregnated with the metal complex was then characterized by various spectroscopic technique such as Fourier Transform Infrared (FTIR), Scanning Electron Microscopy/Energy Dispersive X-ray (SEM/EDX), CHNS elemental analysis, BET surface area, X-ray Diffraction (XRD), Thermogravimetric (TGA) and Inductively Coupled Plasma-Optical Emission (ICP-OES) spectroscopy.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext An effective and novel pore sealing agent to enhance the corrosion resistance performance of Al coating in artificial ocean water

Lee HS, Singh JK, Ismail MA

Sci Rep, 2017 02 03;7:41935.
PMID: 28157233 DOI: 10.1038/srep41935

A new technique was accepted to fill the porosity of Al coating applied by arc thermal spray process to enhance corrosion resistance performance in artificial ocean water. The porosity is the inherent property of arc thermal spray coating process. In this study, applied coating was treated with different concentrations of ammonium phosphate mono basic (NH4H2PO4: AP) solution thereafter dried at room temperature and kept in humidity chamber for 7d to deposit uniform film. The corrosion resistance of Al coating and treated samples have been evaluated using electrochemical impedance spectroscopy (EIS) and potentiodynamic techniques with exposure periods in artificial ocean water. Electrochemical techniques, X-ray diffraction (XRD), Raman spectroscopy, atomic force microscopy (AFM) and field emission-scanning electron microscopy (FE-SEM) indicated that phosphate ion would have been retarding corrosion of Al coating effectively. The formation of AHP (Ammonium Aluminum Hydrogen Phosphate Hydrate: NH4)3Al5H6(PO4)8.18H2O) on Al coating surface after treatment with AP is nano sized, crystalline and uniformly deposited but after exposure them in artificial ocean water, they form AHPH (Aluminum hydroxide phosphate hydrate Al3(PO4)2(OH)3(H2O)5) that is very protective, adherent, uniform and plate like morphology of corrosion products. The AHPH is sparingly soluble and adherent to surface and imparted improved corrosion resistance.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Chitosan-propolis nanoparticle formulation demonstrates anti-bacterial activity against Enterococcus faecalis biofilms

Ong TH, Chitra E, Ramamurthy S, Siddalingam RP, Yuen KH, Ambu SP, et al.

PLoS One, 2017;12(3):e0174888.
PMID: 28362873 DOI: 10.1371/journal.pone.0174888

Propolis obtained from bee hives is a natural substance with antimicrobial properties. It is limited by its insolubility in aqueous solutions; hence ethanol and ethyl acetate extracts of Malaysian propolis were prepared. Both the extracts displayed antimicrobial and anti-biofilm properties against Enterococcus faecalis, a common bacterium associated with hospital-acquired infections. High performance liquid chromatography (HPLC) analysis of propolis revealed the presence of flavonoids like kaempferol and pinocembrin. This study investigated the role of propolis developed into nanoparticles with chitosan for its antimicrobial and anti-biofilm properties against E. faecalis. Bacteria that grow in a slimy layer of biofilm are resistant to penetration by antibacterial agents. The use of nanoparticles in medicine has received attention recently due to better bioavailability, enhanced penetrative capacity and improved efficacy. A chitosan-propolis nanoformulation was chosen based on ideal physicochemical properties such as particle size, zeta potential, polydispersity index, encapsulation efficiency and the rate of release of the active ingredients. This formulation inhibited E. faecalis biofilm formation and reduced the number of bacteria in the biofilm by ~90% at 200 μg/ml concentration. When tested on pre-formed biofilms, the formulation reduced bacterial number in the biofilm by ~40% and ~75% at 200 and 300 μg/ml, respectively. The formulation not only reduced bacterial numbers, but also physically disrupted the biofilm structure as observed by scanning electron microscopy. Treatment of biofilms with chitosan-propolis nanoparticles altered the expression of biofilm-associated genes in E. faecalis. The results of this study revealed that chitosan-propolis nanoformulation can be deemed as a potential anti-biofilm agent in resisting infections involving biofilm formation like chronic wounds and surgical site infections.

Matched MeSH terms: Microscopy, Electron, Transmission
Complete Genome Sequence of Proteus mirabilis Phage pPM_01 Isolated from Raw Sewage

Wirjon IA, Lau NS, Arip YM

Intervirology, 2016;59(5-6):243-253.
PMID: 28384626 DOI: 10.1159/000468987

OBJECTIVES: Phage pPM_01 was previously isolated from a raw sewage treatment facility located in Batu Maung, Penang, Malaysia, and it was highly lytic against Proteus mirabilis, which causes urinary tract infections in humans. In this paper, we characterize the biology and complete genome sequence of the phage.
METHODS AND RESULTS: Transmission electron microscopy revealed phage pPM_01 to be a siphovirus (the first reported virus to infect P. mirabilis), with its complete genome sequence successfully determined. The genome was sequenced using Illumina technology and the reads obtained were assembled using CLC Genomic Workbench v.7.0.3. The whole genome contains a total of 58,546 bp of linear double-stranded DNA with a G+C content of 46.9%. Seventy putative genes were identified and annotated using various bioinformatics tools including RAST, Geneious v.R7, National Center for Biotechnology Information (NCBI) BLAST, and tRNAscan-SE-v1.3 Search. Functional clusters of related potential genes were defined (structural, lytic, packaging, replication, modification, and modulatory). The whole genome sequence showed a low similarity to known phages (i.e., Enterobacter phage Enc34 and Enterobacteria phage Chi). Host range determination and SDS-PAGE analysis were also performed.
CONCLUSIONS: The inability to lysogenize a host, the absence of endotoxin genes in the annotated genome, and the lytic behavior suggest phage pPM_01 as a possible safe biological candidate to control P. mirabilis infection.

Matched MeSH terms: Microscopy, Electron, Transmission
Bioactivity and mechanical stability of Ti-6Al-4V implants superplastically embedded with hydroxyapatite in rats

Mohd Khalid H, Jauhari I, Mohamad Wali HA, Abdulrazzaq Mahmod S

Biomed Mater, 2017 01 25;12(1):015019.
PMID: 28120816 DOI: 10.1088/1748-605X/aa4f8b

In this in vivo study, Sprague Dawley (SD) rats were used to investigate the bioactivity as well as the microstructural and mechanical properties of Ti-6Al-4V samples embedded with hydroxyapatite (HA) using two different coating methods-superplastic embedment (SPE) and superplastic deformation (SPD). The HA layer thickness for the SPE and SPD samples increased from 249.1 ± 0.6 nm to 874.8 ± 13.7 nm, and from 206.1 ± 5.8 nm to 1162.7 ± 7.9 nm respectively, after 12 weeks of implantation. The SPD sample exhibited much faster growth of newly formed HA compared to SPE. The growth of the newly formed HA was strongly dependent on the degree of HA crystallinity in the initial HA layer. After 12 weeks of implantation, the surface hardness value of the SPE and SPD samples decreased from 661 ± 0.4 HV to 586 ± 1.3 HV and from 585 ± 6.6 HV to 425 ± 86.9 HV respectively. The decrease in surface hardness values was due to the newly formed HA layer that was more porous than the initial HA layer. However, the values were still higher than the substrate surface hardness of 321 ± 28.8 HV. Wear test results suggest that the original HA layers for both samples were still strongly intact, and to a certain extent the newly grown HA layers also were strongly bound with the original HA layers. This study confirms the bioactivity and mechanical stability of the HA layer on both samples in vivo.

Matched MeSH terms: Microscopy, Electron, Scanning
The pineal gland of equatorial mammals. I. The pinealocytes of the Malaysian Rat (Rattus sabanus)

Pévet P, Yadav M

Cell Tissue Res, 1980;210(3):417-33.
PMID: 7407847

The ultrastructure of the pinealocytes of the Malaysian rat (Rattus sabanus), a mammal inhabiting a zone near the equator where the annual variations of daylength are inconspicuous, was examined and compared with that of pinealocytes of other mammals. On the basis of the presence of granular vesicles, only one population of pinealocytes was found. A large number of granular vesicles and vesicle-crowned rodlets is characteristic of the pinealocytes of this equatorial species. Vesicle-crowned rodlets are especially numerous in the endings of the pinealocyte processes and; they most often found in direct topographical connection with the perivascular spaces. The physiological significance of the presence of such large amounts of vesicle-crowned rodlets and of the secretory process characterized by the formation of granular vesicles is discussed.

Matched MeSH terms: Microscopy, Electron
Intraspecific variation in Plasmodium falciparum

Aikawa M, Ward RA

Am J Trop Med Hyg, 1974 Jul;23(4):570-3.
PMID: 4367833
Matched MeSH terms: Microscopy, Electron
Thermal Calcination-Based Production of SnO₂ Nanopowder: An Analysis of SnO₂ Nanoparticle Characteristics and Antibacterial Activities

Al-Hada NM, Kamari HM, Baqer AA, Shaari AH, Saion E

Nanomaterials (Basel), 2018 Apr 17;8(4).
PMID: 29673195 DOI: 10.3390/nano8040250

SnO₂ nanoparticle production using thermal treatment with tin(II) chloride dihydrate and polyvinylpyrrolidone capping agent precursor materials for calcination was investigated. Samples were analyzed using X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), Fourier Transform Infrared Spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), diffuse UV-vis reflectance spectra, photoluminescence (PL) spectra and the electron spin resonance (ESR). XRD analysis found tetragonal crystalline structures in the SnO₂ nanoparticles generated through calcination. EDX and FT-IR spectroscopy phase analysis verified the derivation of the Sn and O in the SnO₂ nanoparticle samples from the precursor materials. An average nanoparticle size of 4–15.5 nm was achieved by increasing calcination temperature from 500 °C to 800 °C, as confirmed through TEM. The valence state and surface composition of the resulting nanoparticle were analyzed using XPS. Diffuse UV-vis reflectance spectra were used to evaluate the optical energy gap using the Kubelka-Munk equation. Greater calcination temperature resulted in the energy band gap falling from 3.90 eV to 3.64 eV. PL spectra indicated a positive relationship between particle size and photoluminescence. Magnetic features were investigated through ESR, which revealed the presence of unpaired electrons. The magnetic field resonance decreases along with an increase of the g-factor value as the calcination temperature increased from 500 °C to 800 °C. Finally, Escherichia coli ATCC 25922 Gram (–ve) and Bacillus subtilis UPMC 1175 Gram (+ve) were used for in vitro evaluation of the tin oxide nanoparticle’s antibacterial activity. This work indicated that the zone of inhibition of 22 mm has good antibacterial activity toward the Gram-positive B. subtilis UPMC 1175.

Matched MeSH terms: Microscopy, Electron, Scanning
In vitro biocompatibility of hydroxyapatite-added GIC: An SEM study using human periodontal ligament fibroblasts

Thomas B, Gupta K

J Esthet Restor Dent, 2017 Nov 12;29(6):435-441.
PMID: 28703476 DOI: 10.1111/jerd.12317

OBJECTIVE: Nano-hydroxyapatite-added GIC has been developed to improve the physical properties of conventional GIC. However, biological response of periodontal cells to this potentially useful cervical restorative material has been unexplored. The aim of this study was to investigate the in vitro response of human periodontal ligament fibroblasts to hydroxyapatite-added GIC.
MATERIALS AND METHODS: Three categories of materials, namely, test group 1 (cGIC or type IX GIC), test group 2 (HA-GIC or hydroxyapatite-added GIC), and positive control (glass cover slips) were incubated with human periodontal ligament fibroblasts. The samples were viewed under scanning electron microscope to study the morphological characteristics of fibroblasts. Additionally, elemental analysis was performed to differentiate between the two test groups based on surface chemical composition.
RESULTS: Test group 1 (cGIC) exhibited cells with curled up morphology, indicative of poor attachment to the substrate. Test group 2 (Ha-GIC) exhibited cells with flattened morphology and numerous cellular extensions such as lamellipodia and blebs, indicative of good attachment to the substrate. The test group 2 (Ha-GIC) demonstrated higher surface elemental percentages of calcium and phosphorus.
CONCLUSION: Within the limitations of this study, it may be concluded that hydroxyapatite-added GIC is more biocompatible than conventional GIC (type IX), probably attributed to high elemental percentages of calcium and phosphorus.
CLINICAL SIGNIFICANCE: The search for an ideal cervical restorative dental material has been ever elusive. Hydroxyapatite-added GIC is a simple and economical dental material to fabricate from basic conventional GIC. The results from this study strengthen its candidature for cervical and root surface restorations which may later require soft tissue augmentation. The possibility of connective tissue adhesion to this material is an exciting prospect in the field of periorestorative dentistry.

Matched MeSH terms: Microscopy, Electron, Scanning
HAART induces cell death in a cervical cancer cell line, HCS-2: A Scanning Electron Microscopy study

Xulu KR, Hosie MJ

J Microsc Ultrastruct, 2016 06 17;5(1):39-48.
PMID: 30023236 DOI: 10.1016/j.jmau.2016.06.001

Apoptosis is a tightly programmed cell suicide which occurs in multiple physiologic and pathological conditions where it plays an important role in tissue development and homeostasis by eliminating unwanted and damaged cells. Appropriate apoptosis signalling is crucial in maintaining the fine balance between cell death and cell survival in cancer. In response to death stimuli the morphology of the cell undergoes unique changes. The aim of this study was to examine and compare the changes in the cell surface morphology using scanning electron microscopy in HCS-2 cells, following 24 hour treatment with components of highly active antiretroviral therapy (HAART) at their clinical plasma concentrations. The cells were fixed in 2.5% Glutaraldehyde and post-fixed in 1% osmium tetroxide. The cells were then dehydrated through a graded series of alcohol and treated with hexamethyl-disilazane, then coated with a double layer of carbon. The cells were viewed under a Zeiss Ultra FEG Scanning Electron Microscope and a one way ANOVA and Tukey Kramer Post Hoc test was conducted based on the scoring of surface morphology of the cells using JMP 11 statistical software. The drugs used in this study induced morphological features which are known to be characteristic of apoptotic cell death. The drug combinations (ATP and LPV/r) were seemingly more effective than individual treatments in inducing cell death because morphological features observed were more advanced than those observed in individual treatments. However, LPV/r was more potent than ATP. In conclusion, HAART showed anticancer properties by inducing cell death through apoptosis.

Matched MeSH terms: Microscopy, Electron, Scanning
Evaluation of Effectiveness of Two Different Endodontic Retreatment Systems in Removal of Gutta-percha: An in vitro Study

Raj PKT, Mudrakola DP, Baby D, Govindankutty RK, Davis D, Sasikumar TP, et al.

J Contemp Dent Pract, 2018 Jun 01;19(6):726-731.
PMID: 29959303

AIM: To determine the effectiveness of two different endodontic retreatment systems for the removal of laterally compacted gutta-percha (GP).
MATERIALS AND METHODS: Sixty-three freshly extracted human maxillary central incisors were used for the study. The teeth were instrumented with K-flex files and obturated using lateral condensation technique with GP and AH Plus sealer. The teeth were divided into three retreatment groups, each group consisting of 21 teeth. Group I: D-RaCe desobturation files (D-RaCe); group II: ProTaper Universal retreatment files (PTUR); group III: Hedstrom files (H-file). After removal of GP, the teeth were split longitudinally and divided into three equal parts: Cervical, middle, and apical third. The middle and apical thirds of all root halves were examined using scanning electron microscope (SEM). The total surface area covered by the residual debris was evaluated using Motic Image plus 2.0 software. Statistical analysis was done by one-way analysis of variance (ANOVA) test with a p-value <0.05 used to determine significance and Tukey's multiple post hoc tests used for comparison between the groups, and 't' test was done for comparison between the thirds within the same group.
RESULTS: The PTUR retreatment files showed overall better performance compared with D-RaCe files and H-files. The PTUR files performed better at middle third compared with others. The PTUR files and D-RaCe files performed equally at apical third better than H-files.
CONCLUSION: ProTaper retreatment files are better compared with D-RaCe files and H-files for the retreatment of the previously endodontically treated teeth.
CLINICAL SIGNIFICANCE: Highest efficacy for the removal of GP was shown by ProTaper Universal System followed by D-RaCe and H-file.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Enhanced physicochemical stability and efficacy of angiotensin I-converting enzyme (ACE) - inhibitory biopeptides by chitosan nanoparticles optimized using Box-Behnken design

Auwal SM, Zarei M, Tan CP, Basri M, Saari N

Sci Rep, 2018 Jul 10;8(1):10411.
PMID: 29991723 DOI: 10.1038/s41598-018-28659-5

Bromelain-generated biopeptides from stone fish protein exhibit strong inhibitory effect against ACE and can potentially serve as designer food (DF) with blood pressure lowering effect. Contextually, the DF refer to the biopeptides specifically produced to act as ACE-inhibitors other than their primary role in nutrition and can be used in the management of hypertension. However, the biopeptides are unstable under gastrointestinal tract (GIT) digestion and need to be stabilized for effective oral administration. In the present study, the stone fish biopeptides (SBs) were stabilized by their encapsulation in sodium tripolyphosphate (TPP) cross-linked chitosan nanoparticles produced by ionotropic gelation method. The nanoparticles formulation was then optimized via Box-Behnken experimental design to achieve smaller particle size (162.70 nm) and high encapsulation efficiency (75.36%) under the optimum condition of SBs:Chitosan mass ratio (0.35), homogenization speed (8000 rpm) and homogenization time (30 min). The SBs-loaded nanoparticles were characterized for morphology by transmission electron microscopy (TEM), physicochemical stability and efficacy. The nanoparticles were then lyophilized and analyzed using Fourier transform infra-red spectroscopy (FTIR) and X-ray diffraction (XRD). The results obtained indicated a sustained in vitro release and enhanced physicochemical stability of the SBs-loaded nanoparticles with smaller particle size and high encapsulation efficiency following long period of storage. Moreover, the efficacy study revealed improved inhibitory effect of the encapsulated SBs against ACE following simulated GIT digestion.

Matched MeSH terms: Microscopy, Electron, Transmission
Encapsulation of Ethylene Gas into Granular Cold-Water-Soluble Starch: Structure and Release Kinetics

Shi L, Fu X, Tan CP, Huang Q, Zhang B

J Agric Food Chem, 2017 Mar 15;65(10):2189-2197.
PMID: 28215072 DOI: 10.1021/acs.jafc.6b05749

Ethylene gas was introduced into granular cold-water-soluble (GCWS) starches using a solid encapsulation method. The morphological and structural properties of the novel inclusion complexes (ICs) were characterized using scanning electron microscopy, X-ray diffractometry, and Raman spectroscopy. The V-type single helix of GCWS starches was formed through controlled gelatinization and ethanol precipitation and was approved to host ethylene gas. The controlled release characteristics of ICs were also investigated at various temperature and relative humidity conditions. Avrami's equation was fitted to understand the release kinetics and showed that the release of ethylene from the ICs was accelerated by increasing temperature or RH and was decelerated by increased degree of amylose polymerization. The IC of Hylon-7 had the highest ethylene concentration (31.8%, w/w) among the five starches, and the IC of normal potato starch showed the best controlled release characteristics. As a renewable and inexpensive material, GCWS starch is a desirable solid encapsulation matrix with potential in agricultural and food applications.

Matched MeSH terms: Microscopy, Electron, Scanning

Filters

Please provide feedback to Administrator ([email protected])

External Links