Displaying publications 781 - 800 of 1298 in total

Abstract:
Sort:
  1. Soleimani H, Abbas Z, Yahya N, Shameli K, Soleimani H, Shabanzadeh P
    Int J Mol Sci, 2012;13(7):8540-8.
    PMID: 22942718 DOI: 10.3390/ijms13078540
    The sol-gel method was carried out to synthesize nanosized Yttrium Iron Garnet (YIG). The nanomaterials with ferrite structure were heat-treated at different temperatures from 500 to 1000 °C. The phase identification, morphology and functional groups of the prepared samples were characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR), respectively. The YIG ferrite nanopowder was composited with polyvinylidene fluoride (PVDF) by a solution casting method. The magnitudes of reflection and transmission coefficients of PVDF/YIG containing 6, 10 and 13% YIG, respectively, were measured using rectangular waveguide in conjunction with a microwave vector network analyzer (VNA) in X-band frequencies. The results indicate that the presence of YIG in polymer composites causes an increase in reflection coefficient and decrease in transmission coefficient of the polymer.
    Matched MeSH terms: Microscopy, Electron, Scanning
  2. Ulianas A, Heng LY, Abu Hanifah S, Ling TL
    Sensors (Basel), 2012;12(5):5445-60.
    PMID: 22778594 DOI: 10.3390/s120505445
    An electrochemical microbiosensor for DNA has been fabricated based on new acrylic microspheres modified with reactive N-acryloxysuccinimide (NAS) functional groups. Hydrophobic poly(n-butylacrylate-N-acryloxysuccinimide) microspheres were synthesized in an emulsion form with a simple one-step photopolymerization technique. Aminated DNA probe was attached to the succinimde functional group of the acrylic microspheres via covalent bonding. The hybridization of the immobilized DNA probe with the complementary DNA was studied by differential pulse voltametry using anthraquninone-2-sulfonic acid monohydrate sodium salt (AQMS) as the electroactive hybridization label. The influences of many factors such as duration of DNA probe immobilization and hybridization, pH, type of ions, buffer concentrations, ionic strength, operational temperature and non-complementary DNA on the biosensor performance were evaluated. Under optimized conditions, the DNA microbiosensor demonstrated a linear response range to target DNA over a wide concentration range of 1.0 × 10(-16) and 1.0 × 10(-8) M with a lower limit of detection (LOD) of 9.46 × 10(-17) M (R(2) = 0.97). This DNA microbiosensor showed good reproducibility with 2.84% RSD (relative standard deviation) (n = 3). Application of the NAS-modified acrylic microspheres in the construction of DNA microbiosensor had improved the overall analytical performance of the resultant DNA microbiosensor when compared with other reported DNA biosensors using other nano-materials for membranes and microspheres as DNA immobilization matrices.
    Matched MeSH terms: Microscopy, Electron, Scanning
  3. Dian-Xing F, Guang-Chun L
    Microsc Res Tech, 2012 Sep;75(9):1297-303.
    PMID: 22522698 DOI: 10.1002/jemt.22064
    In addition to causing myiasis in humans, Megaselia spiracularis Schmitz has also been reported as a forensically important fly. In this study, we presented the morphology of all larval instars and puparium of M. spiracularis using scanning electron microscopy. The first instar larva was composed of 12 segments. Antennae and maxillary palp complex were visible. Two spiracular slits could be seen at the posterior spiracle. The branch of posterior spiracular hairs was approximately equal to the palm-formed base in length. Second and third larval instars were very similar to first instar, except for the presence of anterior spiracle. The labium of the second instar larva was triangular and ventrally curved, whereas it was a bilobed structure and the tip forked in the first instar. The bubble membrance comprised of ≈40 globules presented at the third instar larvae. Puparia showed a retracted cephalic region and a pair of pupal respiratory horns on the dorsum. A comparison of the morphological features between immature stages of M. spiracularis and M. scalaris, a forensically important fly indoors in Germany, Malaysia, and China, was discussed.
    Matched MeSH terms: Microscopy, Electron, Scanning
  4. Ho WY, Yeap SK, Ho CL, Rahim RA, Alitheen NB
    PLoS One, 2012;7(9):e44640.
    PMID: 22970274 DOI: 10.1371/journal.pone.0044640
    In comparison to monolayer cells, MCTS has been claimed as more suitable candidate for studying drug penetration due to the high resemblance to solid tumors. However, the cultivation of MCTS is cumbersome, time consuming, and most technique fail to generate spheroids with uniform sizes. Therefore, the application of spheroid cultures in high throughput screening has been rather limiting. Besides, the lack of a well established screening protocol method that is applicable to spheroid could also be attributed to this limitation. Here we report a simple way of cultivating homogenous MCTS cultures with compact and rigid structure from the MCF-7 cells. Besides, we had also made some modifications to the standard MTT assay to realize high throughput screening of these spheroids. Using the modified protocol, tamoxifen showed cytotoxicity effect towards MCTS cultures from MCF-7 with high consistency. The results correlated well with the cultures' response assessed by LDH release assay but the latter assay was not ideal for detecting a wide range of cytotoxicity due to high basal background reading. The MTT assay emerged as a better indicator to apoptosis event in comparison to the LDH release assay. Therefore, the method for spheroid generation and the modified MTT assay we reported here could be potentially applied to high throughput screening for response of spheroid cultures generated from MCF-7 as well as other cancer cell lines towards cytotoxic stimuli.
    Matched MeSH terms: Microscopy, Electron, Scanning
  5. Ahmad MB, Gharayebi Y, Salit MS, Hussein MZ, Shameli K
    Int J Mol Sci, 2011;12(9):6040-50.
    PMID: 22016643 DOI: 10.3390/ijms12096040
    In this paper, Polyimide/Montmorillonite Nanocomposites (PI/MMT NCs), based on aromatic diamine (4-Aminophenyl sulfone) (APS) and aromatic dianhydride (3,3',4,4'-benzophenonetetracarboxylic dianhydride) (BTDA) were prepared using in situ polymerization and solution-dispersion techniques. The prepared PI/MMT NCs films were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). The XRD results showed that at the content of 1.0 wt % Organo Montmorillonite (OMMT) for two techniques and 3.0 wt % OMMT for the in situ polymerization technique, the OMMT was well-intercalated, exfoliated and dispersed into polyimide matrix. The OMMT agglomerated when its amount exceeded 10 wt % and 3.0 wt % for solution-dispersion and in situ polymerization techniques respectively. These results were confirmed by the TEM images of the prepared PI/MMT NCs. The TGA thermograms indicated that thermal stability of prepared PI/MMT NCs were increased with the increase of loading that, the effect is higher for the samples prepared by in situ polymerization technique.
    Matched MeSH terms: Microscopy, Electron, Transmission
  6. Lye HS, Karim AA, Rusul G, Liong MT
    J Dairy Sci, 2011 Oct;94(10):4820-30.
    PMID: 21943733 DOI: 10.3168/jds.2011-4426
    The objective of the present study was to evaluate the effect of electroporation on the membrane properties of lactobacilli and their ability to remove cholesterol in vitro. The growth of lactobacilli cells treated at 7.5 kV/cm for 4 ms was increased by 0.89 to 1.96 log(10) cfu/mL upon fermentation at 37 °C for 20 h, the increase being attributed to the reversible and transient formation of pores and defragmentation of clumped cells. In addition, an increase of cholesterol assimilation as high as 127.2% was observed for most cells electroporated at a field strength of 7.5 kV/cm for 3.5 ms compared with a lower field strength of 2.5 kV/cm. Electroporation also increased the incorporation of cholesterol into the cellular membrane, as shown by an increased cholesterol:phospholipids ratio (50.0-59.6%) upon treatment at 7.5 kV/cm compared with treatment at 2.5 kV/cm. Saturation of cholesterol was observed in different regions of the membrane bilayer such as upper phospholipids, apolar tail, and polar heads, as indicated by fluorescence anisotropy using 3 fluorescent probes. Electroporation could be a useful technique to increase the ability of lactobacilli to remove cholesterol for possible use as cholesterol-lowering adjuncts in the future.
    Matched MeSH terms: Microscopy, Electron, Scanning
  7. Desjardin DE, Peay KG, Bruns TD
    Mycologia, 2011 Sep-Oct;103(5):1119-23.
    PMID: 21558499 DOI: 10.3852/10-433
    A gasteroid bolete collected recently in Sarawak on the island of Borneo is described as the new species Spongiforma squarepantsii. A comprehensive description, illustrations, phylogenetic placement and a comparison with a closely allied species are provided.
    Matched MeSH terms: Microscopy, Electron, Scanning
  8. Kalani M, Yunus R, Abdullah N
    Int J Nanomedicine, 2011;6:1101-5.
    PMID: 21698077 DOI: 10.2147/IJN.S18979
    The aim of this study was to optimize the different process parameters including pressure, temperature, and polymer concentration, to produce fine small spherical particles with a narrow particle size distribution using a supercritical antisolvent method for drug encapsulation. The interaction between different process parameters was also investigated.
    Matched MeSH terms: Microscopy, Electron, Scanning
  9. Schaeffner BC, Gasser RB, Beveridge I
    Syst Parasitol, 2011 Sep;80(1):1-15.
    PMID: 21805386 DOI: 10.1007/s11230-011-9309-8
    A new genus of trypanorhynch cestode is described from two species of sharks, the sliteye shark Loxodon macrorhinus Müller & Henle and the straight-tooth weasel shark Paragaleus tengi (Chen) collected in the Makassar Strait (off Indonesian Borneo) and Sulu Sea (off Malaysian Borneo). Ancipirhynchus afossalis n. g., n. sp. possesses two bothria and a heteroacanthous, heteromorphous tentacular armature with three distinctive files of hooks on the external tentacle surface but lacks prebulbar organs and gland cells within the tentacular bulbs. The hook arrangement of alternating files on the external surface of the tentacle resembles that seen in the superfamily Otobothrioidea Dollfus, 1942 in the genus Fossobothrium Beveridge & Campbell, 2005. However, the new species lacks the defining characteristic of this group, i.e. the paired bothrial pits. A Bayesian inference (BI) analysis of 37 LSU sequences of trypanorhynchs from three superfamilies provided evidence supporting the taxonomic placement of Ancipirhynchus afossalis n. g., n. sp. within the Otobothrioidea.
    Matched MeSH terms: Microscopy, Electron, Scanning
  10. Ulianas A, Heng LY, Ahmad M
    Sensors (Basel), 2011;11(9):8323-38.
    PMID: 22164078 DOI: 10.3390/s110908323
    New acrylic microspheres were synthesised by photopolymerisation where the succinimide functional group was incorporated during the microsphere preparation. An optical biosensor for urea based on reflectance transduction with a large linear response range to urea was successfully developed using this material. The biosensor utilized succinimide-modified acrylic microspheres immobilized with a Nile blue chromoionophore (ETH 5294) for optical detection and urease enzyme was immobilized on the surface of the microspheres via the succinimide groups. No leaching of the enzyme or chromoionophore was observed. Hydrolysis of the urea by urease changes the pH and leads to a color change of the immobilized chromoionophore. When the color change was monitored by reflectance spectrophotometry, the linear response range of the biosensor to urea was from 0.01 to 1,000 mM (R2 = 0.97) with a limit of detection of 9.97 μM. The biosensor response showed good reproducibility (relative standard deviation = 1.43%, n = 5) with no interference by major cations such as Na+, K+, NH4+ and Mg2+. The use of reflectance as a transduction method led to a large linear response range that is better than that of many urea biosensors based on other optical transduction methods.
    Matched MeSH terms: Microscopy, Electron, Scanning
  11. Anarjan N, Tan CP, Ling TC, Lye KL, Malmiri HJ, Nehdi IA, et al.
    J Agric Food Chem, 2011 Aug 24;59(16):8733-41.
    PMID: 21726079 DOI: 10.1021/jf201314u
    A simplex centroid mixture design was used to study the interactions between two chosen solvents, dichloromethane (DCM) and acetone (ACT), as organic-phase components in the formation and physicochemical characterization and cellular uptake of astaxanthin nanodispersions produced using precipitation and condensation processes. Full cubic or quadratic regression models with acceptable determination coefficients were obtained for all of the studied responses. Multiple-response optimization predicted that the organic phase with 38% (w/w) DCM and 62% (w/w) ACT yielded astaxanthin nanodispersions with the minimum particle size (106 nm), polydispersity index (0.191), and total astaxanthin loss (12.7%, w/w) and the maximum cellular uptake (2981 fmol/cell). Astaxanthin cellular uptake from the produced nanodispersions also showed a good correlation with their particle size distributions and astaxanthin trans/cis isomerization ratios. The absence of significant (p > 0.05) differences between the experimental and predicted values of the response variables confirmed the adequacy of the fitted models.
    Matched MeSH terms: Microscopy, Electron, Transmission
  12. Darroudi M, Ahmad MB, Abdullah AH, Ibrahim NA
    Int J Nanomedicine, 2011;6:569-74.
    PMID: 21674013 DOI: 10.2147/IJN.S16867
    Silver nanoparticles (Ag-NPs) have been successfully prepared with simple and "green" synthesis method by reducing Ag(+) ions in aqueous gelatin media with and in the absence of glucose as a reducing agent. In this study, gelatin was used for the first time as a reducing and stabilizing agent. The effect of temperature on particle size of Ag-NPs was also studied. It was found that with increasing temperature the size of nanoparticles is decreased. It was found that the particle size of Ag-NPs obtained in gelatin solutions is smaller than in gelatin-glucose solutions, which can be related to the rate of reduction reaction. X-ray diffraction, ultraviolet-visible spectra, transmission electron microscopy, and atomic force microscopy revealed the formation of monodispersed Ag-NPs with a narrow particle size distribution.
    Matched MeSH terms: Microscopy, Electron, Transmission
  13. Abdullah N, Ujang Z, Yahya A
    Bioresour Technol, 2011 Jun;102(12):6778-81.
    PMID: 21524907 DOI: 10.1016/j.biortech.2011.04.009
    The present study investigates the formation of aerobic granular sludge in sequencing batch reactor (SBR) fed with palm oil mill effluent (POME). Stable granules were observed in the reactor with diameters between 2.0 and 4.0mm at a chemical oxygen demand (COD) loading rate of 2.5 kg COD m(-3) d(-1). The biomass concentration was 7600 mg L(-1) while the sludge volume index (SVI) was 31.3 mL g SS(-1) indicating good biomass accumulation in the reactor and good settling properties of granular sludge, respectively. COD and ammonia removals were achieved at a maximum of 91.1% and 97.6%, respectively while color removal averaged at only 38%. This study provides insights on the development and the capabilities of aerobic granular sludge in POME treatment.
    Matched MeSH terms: Microscopy, Electron, Scanning
  14. Foo KY, Hameed BH
    Bioresour Technol, 2011 Oct;102(20):9814-7.
    PMID: 21871796 DOI: 10.1016/j.biortech.2011.07.102
    Rice husk (RH), an abundant by-product of rice milling, was used for the preparation of activated carbon (RHAC) via KOH and K(2)CO(3) chemical activation. The activation process was performed at the microwave input power of 600 W for 7 min. RHACs were characterized by low temperature nitrogen adsorption/desorption, scanning electron microscopy and Fourier transform infrared spectroscopy. The adsorption behavior was examined using methylene blue as adsorbate. The K(2)CO(3)-activated sample showed higher yield and better pore structures and adsorption capacity development than the KOH-activated sample, with a BET surface area, total pore volume and monolayer adsorption capacity of 1165 m(2)/g, 0.78 cm(3)/g and 441.52 mg/g, respectively. The results revealed the feasibility of microwave heating for preparation of high surface area activated carbons from rice husks via K(2)CO(3) activation.
    Matched MeSH terms: Microscopy, Electron, Scanning
  15. Chee JY, Lau NS, Samian MR, Tsuge T, Sudesh K
    J Appl Microbiol, 2012 Jan;112(1):45-54.
    PMID: 22054430 DOI: 10.1111/j.1365-2672.2011.05189.x
    Burkholderia sp. USM (JCM15050) isolated from oil-polluted wastewater is capable of utilizing palm oil products and glycerol to synthesize poly(3-hydroxybutyrate) [P(3HB)]. To confer the ability to produce polymer containing 3-hydroxyhexanoate (3HHx), plasmid (pBBREE32d13) harbouring the polyhydroxyalkanoate (PHA) synthase gene of Aeromonas caviae (phaC(Ac)) was transformed into this strain.
    Matched MeSH terms: Microscopy, Electron, Transmission
  16. Tang SY, Manickam S, Wei TK, Nashiru B
    Ultrason Sonochem, 2012 Mar;19(2):330-45.
    PMID: 21835676 DOI: 10.1016/j.ultsonch.2011.07.001
    In the present study, response surface methodology (RSM) based on central composite design (CCD) was employed to investigate the influence of main emulsion composition variables, namely drug loading, oil content, emulsifier content as well as the effect of the ultrasonic operating parameters such as pre-mixing time, ultrasonic amplitude, and irradiation time on the properties of aspirin-loaded nanoemulsions. The two main emulsion properties studied as response variables were: mean droplet size and polydispersity index. The ultimate goal of the present work was to determine the optimum level of the six independent variables in which an optimal aspirin nanoemulsion with desirable properties could be produced. The response surface analysis results clearly showed that the variability of two responses could be depicted as a linear function of the content of main emulsion compositions and ultrasonic processing variables. In the present investigation, it is evidently shown that ultrasound cavitation is a powerful yet promising approach in the controlled production of aspirin nanoemulsions with smaller average droplet size in a range of 200-300 nm and with a polydispersity index (PDI) of about 0.30. This study proved that the use of low frequency ultrasound is of considerable importance in the controlled production of pharmaceutical nanoemulsions in the drug delivery system.
    Matched MeSH terms: Microscopy, Electron, Scanning
  17. Muhammad N, Man Z, Bustam MA, Mutalib MI, Wilfred CD, Rafiq S
    Appl Biochem Biotechnol, 2011 Oct;165(3-4):998-1009.
    PMID: 21720837 DOI: 10.1007/s12010-011-9315-y
    In the present work, the dissolution of bamboo biomass was tested using a number of ionic liquids synthesized in laboratory. It was observed that one of the synthesized amino acid-based ionic liquids, namely 1-ethyl-3-methylimidazolium glycinate, was capable of dissolving the biomass completely. The dissolved biomass was then regenerated using a reconstitute solvent (acetone/water) and was characterized using Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The results were compared to preconditioned bamboo biomass. The regenerated biomass was found to have a more homogenous macrostructure, which indicates that the crystalline form and structure of its cellulose has changed from type Ι to type ΙΙ during the dissolution and regeneration process.
    Matched MeSH terms: Microscopy, Electron, Scanning
  18. Maqbool M, Ali A, Alderson PG, Zahid N, Siddiqui Y
    J Agric Food Chem, 2011 May 25;59(10):5474-82.
    PMID: 21476593 DOI: 10.1021/jf200623m
    The composite effects of gum arabic (GA) (5, 10, 15, and 20%) and chitosan (CH) (1.0%) on the biochemical and physiological characteristics of banana fruits stored at 13 ± 1 °C and 80 ± 3% relative humidity (RH) for 28 days and afterward for 5 days at simulated marketing conditions (25 °C, 60% RH) were investigated. Significant (P ≤ 0.05) differences were observed for the entire GA plus CH treatments as compared to the control. However, the results showed that after 33 days of storage, the weight loss and soluble solids concentration of fruits treated with 10% GA plus 1.0% CH composite coating were 24 and 54% lower, whereas fruit firmness, total carbohydrates, and reducing sugars were 31, 59, and 40% higher than the control, respectively. Furthermore, the composite edible coating of 10% GA plus 1.0% CH delayed color development and reduced the rate of respiration and ethylene evolution during storage as compared to the control. Similarly, sensory evaluation results also proved the effectiveness of 10% GA plus 1.0% CH composite coating by maintaining the overall quality of banana fruits. Consequently, the results of scanning electron microscopy also confirmed that the fruits coated with 10% GA plus 1.0% CH composite edible coating had very fewer cracks and showed a smooth surface. These findings suggest that 10% GA plus 1.0% CH as an edible composite coating can be used commercially for extending the storage life of banana fruits for up to 33 days.
    Matched MeSH terms: Microscopy, Electron, Scanning
  19. Basma AA, Zuraini Z, Sasidharan S
    Asian Pac J Trop Biomed, 2011 Jan;1(1):20-2.
    PMID: 23569719 DOI: 10.1016/S2221-1691(11)60062-2
    To determine the major changes in the microstructure of Candida albicans (C. albicans) after treatment with Euphorbia hirta (E. hirta) L. leaf extract.
    Matched MeSH terms: Microscopy, Electron, Transmission
  20. Ibrahim MN, Ngah WS, Norliyana MS, Daud WR, Rafatullah M, Sulaiman O, et al.
    J Hazard Mater, 2010 Oct 15;182(1-3):377-85.
    PMID: 20619537 DOI: 10.1016/j.jhazmat.2010.06.044
    The present study explores the ability of modified soda lignin (MSL) extracted from oil palm empty fruit bunches (EFB) in removing lead (II) ions from aqueous solutions. The effect of contact time, point zero charge (pH(pzc)) and pH of the solution, initial metal ion concentration and adsorbent dosage on the removal process were investigated. Furthermore, the MSL is characterized by SEM, XRF, FT-IR and surface area analysis. Equilibrium adsorption isotherms and kinetics were investigated. The experimental data were analyzed by the Langmuir, Freundlich and Temkin models of adsorption. The kinetic data obtained at different initial concentrations were analyzed using pseudo-first-order and pseudo-second-order models. The results provide strong evidence to support the hypothesis of adsorption mechanism.
    Matched MeSH terms: Microscopy, Electron, Scanning
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links