Displaying publications 61 - 80 of 285 in total

Abstract:
Sort:
  1. Loow YL, Wu TY, Tan KA, Lim YS, Siow LF, Jahim JM, et al.
    J Agric Food Chem, 2015 Sep 30;63(38):8349-63.
    PMID: 26325225 DOI: 10.1021/acs.jafc.5b01813
    Currently, the transformation of lignocellulosic biomass into value-added products such as reducing sugars is garnering attention worldwide. However, efficient hydrolysis is usually hindered by the recalcitrant structure of the biomass. Many pretreatment technologies have been developed to overcome the recalcitrance of lignocellulose such that the components can be reutilized more effectively to enhance sugar recovery. Among all of the utilized pretreatment methods, inorganic salt pretreatment represents a more novel method and offers comparable sugar recovery with the potential for reducing costs. The use of inorganic salt also shows improved performance when it is integrated with other pretreatment technologies. Hence, this paper is aimed to provide a detailed overview of the current situation for lignocellulosic biomass and its physicochemical characteristics. Furthermore, this review discusses some recent studies using inorganic salt for pretreating biomass and the mechanisms involved during the process. Finally, some prospects and challenges using inorganic salt are highlighted.
    Matched MeSH terms: Sodium Chloride/chemistry
  2. Aissaoui T, AlNashef IM, Hayyan M, Hashim MA
    PMID: 25985123 DOI: 10.1016/j.saa.2015.05.001
    Deep eutectic solvents (DESs) are novel solvent media that are currently under investigation as an alternative to ionic liquids and conventional solvents. The physical properties of DESs as well as their mild environmental footprint and potentially critical industrial application necessitate understanding the interaction of functional groups on both the salt and hydrogen bond donor (HBD). In this study, four DESs were prepared by mixing triethylenglycol, diethylenglycol, ethylenglycol, and glycerol as HBDs with methyltriphenylphosphonium bromide as a salt at a molar ratio of 1:4. Fourier transform infrared spectroscopy was conducted to highlight the chemical structure and mechanism of the combination of the four DESs. New spectra illustrating the combination of the functional groups of the HBDs and salt were observed and interpreted. This study is the first to investigate the properties of neoteric phosphonium-based DESs.
    Matched MeSH terms: Sodium Chloride; Sodium Chloride, Dietary
  3. Makahleh A, Yap HF, Saad B
    Talanta, 2015 Oct 01;143:394-401.
    PMID: 26078176 DOI: 10.1016/j.talanta.2015.05.011
    A new, rapid and sensitive microextraction technique named vortex-assisted liquid-liquid-liquid microextraction (VALLLME) is proposed. The complete extraction process involves two steps. First, a vortex-assisted liquid-liquid microextraction (VALLME) procedure was used to extract the analytes from a relatively large volume of sample (donor phase) to a small volume of organic solvent (intermediate phase). Next, a micro-vortex-assisted liquid-liquid extraction (µ-VALLE) was used to extract the target analytes from the intermediate phase to a smaller volume of aqueous solution (acceptor phase). The final extract (acceptor phase) can be directly injected into the high performance liquid chromatography or capillary electrophoresis units without any further treatments. The selection of the intermediate phase and the manipulation of pH are key parameters that ensure good extraction efficiency of the technique. The proposed technique has been successfully applied for the determination of carvedilol (used as model analyte) in biological fluid samples. The optimum extraction conditions were: toluene as intermediate phase (150 μL); pH of the donor phase, 9.5; vortex time of the VALLME, 45 s (maximum speed, 2500 rpm); 0.1M HCl (15 μL) as acceptor phase; vortexing time of the µ-VALLME, 75 s (maximum stirring speed, 2500 rpm) and salt concentration in the donor phase, 5% (w/v). Under these conditions, enrichment factors of 51- and 418-fold for VALLME step and VALLLME procedure, respectively, were achieved.
    Matched MeSH terms: Sodium Chloride; Sodium Chloride, Dietary
  4. Alam MA, Juraimi AS, Rafii MY, Abdul Hamid A
    Biomed Res Int, 2015;2015:105695.
    PMID: 25802833 DOI: 10.1155/2015/105695
    13 selected purslane accessions were subjected to five salinity levels 0, 8, 16, 24, and 32 dS m(-1). Salinity effect was evaluated on the basis of biomass yield reduction, physiological attributes, and stem-root anatomical changes. Aggravated salinity stress caused significant (P < 0.05) reduction in all measured parameters and the highest salinity showed more detrimental effect compared to control as well as lower salinity levels. The fresh and dry matter production was found to increase in Ac1, Ac9, and Ac13 from lower to higher salinity levels but others were badly affected. Considering salinity effect on purslane physiology, increase in chlorophyll content was seen in Ac2, Ac4, Ac6, and Ac8 at 16 dS m(-1) salinity, whereas Ac4, Ac9, and Ac12 showed increased photosynthesis at the same salinity levels compared to control. Anatomically, stem cortical tissues of Ac5, Ac9, and Ac12 were unaffected at control and 8 dS m(-1) salinity but root cortical tissues did not show any significant damage except a bit enlargement in Ac12 and Ac13. A dendrogram was constructed by UPGMA based on biomass yield and physiological traits where all 13 accessions were grouped into 5 clusters proving greater diversity among them. The 3-dimensional principal component analysis (PCA) has also confirmed the output of grouping from cluster analysis. Overall, salinity stressed among all 13 purslane accessions considering biomass production, physiological growth, and anatomical development Ac9 was the best salt-tolerant purslane accession and Ac13 was the most affected accession.
    Matched MeSH terms: Sodium Chloride/metabolism
  5. Syaidatul Faraha Zainuddin, Siti Raihan Zakaria, Norashikin Saim, Rossuriati Dol Hamid, Rozita Osman
    Science Letters, 2020;14(2):58-70.
    MyJurnal
    Headspace solid phase microextraction (HS-SPME) was employed for the extraction of volatile organic compounds (VOCs) in MD2 pineapple (Ananas comosus L. var. comosus cv. MD2). Optimisation of HS-SPME operating parameters was conducted using three-factor, three-level Box–Behnken response surface experimental design to evaluate the interactive effects of temperature (30 – 50 ºC), extraction time (10 – 30 min) and salting effect (1 – 3 g of salt addition) on the amount of selected VOCs. Determination of VOCs was done using gas chromatography with spectrometry detector (GC-MSD). Extraction temperature was found to be significant (p < 0.05) in increasing the amount of selected VOCs (ethyl acetate, methyl isobutyrate and butanoic acid methyl ester). Based on the maximum amount of these VOCs, the optimum operating extraction conditions for HS-SPME were set up at temperature of 30 °C, time of 29 min and salt addition of 1 g. The optimized HS-SPME conditions were employed for the extraction of VOCs from pineapple of different varieties.
    Matched MeSH terms: Sodium Chloride; Sodium Chloride, Dietary
  6. Tan CH, Chow ZY, Ching SM, Devaraj NK, He FJ, MacGregor GA, et al.
    BMJ Open, 2019 05 01;9(4):e024702.
    PMID: 31048428 DOI: 10.1136/bmjopen-2018-024702
    OBJECTIVE: To determine the salt content in instant noodles sold in Malaysia.

    STUDY DESIGN: A cross-sectional survey was done involving 707 different flavours and packaging of instant noodles sold in six hypermarkets and retailer chains in Malaysia and the corresponding brand's official websites in 2017.

    METHODS: The salt content (gram per serving and per 100 g) was collected from the product packaging and corresponding brand's official website.

    RESULTS: Of the 707 different packaging and flavours of instant noodles, only 62.1% (n=439) provided the salt content in their food label.The mean (±SD) salt per 100 g of instant noodles was 4.3±1.5 g and is nearly four times higher than the salt content of food classified in Malaysia as a high salt content (>1.2 g salt per 100 g). The salt content for instant noodle per packaging ranged from 0.7 to 8.5 g. 61.7% of the instant noodles exceeded the Pacific Salt Reduction Target, 11.8% exceeded the WHO recommended daily salt intake of <5.0 per day and 5.50% exceeded Malaysia Salt Action Target. 98% of instant noodles will be considered as high salt food according to the Malaysia Guidelines.The probability of the instant noodles without mixed flavour (n=324) exceeding the Pacific Salt Reduction Target was tested on univariate and multivariate analysis. Instant noodles with soup, Tom Yam flavour, pork flavour and other flavours were found to be predictors of instant noodles with the tendency to exceed Pacific Salt Reduction Target when compared with instant noodles without mixed flavours (p<0.05).

    CONCLUSION: Only 62% of instant noodles displayed the salt content on their food label. Salt content in instant noodles is very high, with 90% exceeding the daily salt intake recommended by WHO. Prompt action from regulatory and health authorities is needed to reduce the salt content in instant noodles.

    Matched MeSH terms: Sodium Chloride, Dietary/analysis*
  7. Al-Saari N, Amada E, Matsumura Y, Tanaka M, Mino S, Sawabe T
    PeerJ, 2019;7:e6769.
    PMID: 31024772 DOI: 10.7717/peerj.6769
    Biohydrogen is one of the most suitable clean energy sources for sustaining a fossil fuel independent society. The use of both land and ocean bioresources as feedstocks show great potential in maximizing biohydrogen production, but sodium ion is one of the main obstacles in efficient bacterial biohydrogen production. Vibrio tritonius strain AM2 can perform efficient hydrogen production with a molar yield of 1.7 mol H2/mol mannitol, which corresponds to 85% theoretical molar yield of H2 production, under saline conditions. With a view to maximizing the hydrogen production using marine biomass, it is important to accumulate knowledge on the effects of salts on the hydrogen production kinetics. Here, we show the kinetics in batch hydrogen production of V. tritonius strain AM2 to investigate the response to various NaCl concentrations. The modified Han-Levenspiel model reveals that salt inhibition in hydrogen production using V. tritonius starts precisely at the point where 10.2 g/L of NaCl is added, and is critically inhibited at 46 g/L. NaCl concentration greatly affects the substrate consumption which in turn affects both growth and hydrogen production. The NaCl-dependent behavior of fermentative hydrogen production of V. tritonius compared to that of Escherichia coli JCM 1649 reveals the marine-adapted fermentative hydrogen production system in V. tritonius. V. tritonius AM2 is capable of producing hydrogen from seaweed carbohydrate under a wide range of NaCl concentrations (5 to 46 g/L). The optimal salt concentration producing the highest levels of hydrogen, optimal substrate consumption and highest molar hydrogen yield is at 10 g/L NaCl (1.0% (w/v)).
    Matched MeSH terms: Sodium Chloride; Sodium Chloride, Dietary
  8. Kuang TK, Kang YB, Segarra I, Kanwal U, Ahsan M, Bukhari NI
    Turk J Pharm Sci, 2021 04 20;18(2):167-175.
    PMID: 33902255 DOI: 10.4274/tjps.galenos.2020.48902
    Objectives: This study was conducted to assess the effect of microwave heating on the preparation of paracetamol cross-linked gelatin matrices by using the design of experiment (DoE) approach and explore the influence of the duration of microwave irradiation, the concentrations of crosslinker, and the amount of sodium bicarbonate (salt) on paracetamol release. These parameters were also compared with those of the matrices prepared via conventional heating.

    Materials and Methods: Twenty gel matrices were prepared with different durations of microwave irradiation, amounts of maize, and concentrations of sodium bicarbonate as suggested by Design Expert (DX®). The percentage drug release, the coefficient of variance (CV) in release, and the mean dissolution time (MDT) were the properties explored in the designed experimentation.

    Results: Target responses were dependent on microwave irradiation time, cross-linker amount, and salt concentration. Classical and microwave heating did not demonstrate statistically significant difference in modifying the percentage of drug released from the matrices. However, the CVs of microwave-assisted formulations were lower than those of the gel matrices prepared via classical heating. Thus, microwave heating produced lesser variations in drug release. The optimized gel matrices demonstrated that the observed percentage of drug release, CV, and MDT were within the prediction interval generated by DX®. The release mechanism of the matrix formulations followed the Peppas-Korsmeyer anomalous transport model.

    Conclusion: The DoE-supported microwave-assisted approach could be applied to optimize the critical factors of drug release with less variation.

    Matched MeSH terms: Sodium Chloride; Sodium Chloride, Dietary
  9. Zaharani L, Ghaffari Khaligh N, Shahnavaz Z, Rafie Johan M
    Turk J Chem, 2020;44(3):535-542.
    PMID: 33488175 DOI: 10.3906/kim-2002-26
    In the current protocol, the arene diazonium saccharin derivatives were initially produced from various substituted aromatic amines; subsequently, these intermediates were treated with a greener organic iodide for the preparation of the aryl iodide. We tried to choose low-cost, commercially available, biodegradable, recoverable, ecofriendly, and safe reagents and solvents. The arene diazonium saccharin intermediates could be stored in the liquid phase into a refrigerator for a long time with no significant loss activity. The outstanding merits of the current protocol (a) included the partial recovering of saccharin and tetraethylammonium salt, (b) reduce the use of solvents and the reaction steps due to eliminating separation and purification of intermediates, (c) good yield of the sterically hindered substrates, and (d) avoid the generation of heavy metal or corrosive waste.
    Matched MeSH terms: Sodium Chloride; Sodium Chloride, Dietary
  10. McGrattan A, Mohan D, Chua PW, Mat Hussin A, Soh YC, Alawad M, et al.
    BMJ Open, 2020 08 27;10(8):e035453.
    PMID: 32859661 DOI: 10.1136/bmjopen-2019-035453
    INTRODUCTION: Global population ageing is one of the key factors linked to the projected rise of dementia incidence. Hence, there is a clear need to identify strategies to overcome this expected health burden and have a meaningful impact on populations' health worldwide. Current evidence supports the role of modifiable dietary and lifestyle risk factors in reducing the risk of dementia. In South-East Asia, changes in eating and lifestyle patterns under the influence of westernised habits have resulted in significant increases in the prevalence of metabolic, cardiovascular and neurodegenerative non-communicable diseases (NCDs). Low vegetable consumption and high sodium intake have been identified as key contributors to the increased prevalence of NCDs in these countries. Therefore, nutritional and lifestyle strategies targeting these dietary risk factors are warranted. The overall objective of this randomised feasibility trial is to demonstrate the acceptability of a dietary intervention to increase the consumption of high-nitrate green leafy vegetables and reduce salt intake over 6 months among Malaysian adults with raised blood pressure.

    METHODS AND ANALYSIS: Primary outcomes focus on feasibility measures of recruitment, retention, implementation and acceptability of the intervention. Secondary outcomes will include blood pressure, cognitive function, body composition and physical function (including muscle strength and gait speed). Adherence to the dietary intervention will be assessed through collection of biological samples, 24-hour recall and Food Frequency Questionnaire. A subgroup of participants will also complete postintervention focus groups to further explore the feasibility considerations of executing a larger trial, the ability of these individuals to make dietary changes and the barriers and facilitators associated with implementing these changes.

    ETHICS AND DISSEMINATION: Ethical approval has been obtained from Monash University Human Research Ethics Committee and Medical Research and Ethics Committee of Malaysia. Results of the study will be disseminated via peer-reviewed publications and presentations at national and international conferences.ISRCTN47562685; Pre-results.

    Matched MeSH terms: Sodium Chloride, Dietary*
  11. Mohd Hassan FW, Muggundha Raoov, Kamaruzaman S, Sanagi MM, Yoshida N, Hirota Y, et al.
    J Sep Sci, 2018 Oct;41(19):3751-3763.
    PMID: 30125466 DOI: 10.1002/jssc.201800326
    This study describes a dispersive liquid-liquid microextraction combined with dispersive solid-phase extraction method based on phenyl-functionalized magnetic sorbent for the preconcentration of polycyclic aromatic hydrocarbons from environmental water, sugarcane juice, and tea samples prior to gas chromatography with mass spectrometry analysis. Several important parameters affecting the extraction efficiency were investigated thoroughly, including the mass of sorbent, type and volume of extraction solvent, extraction time, type of desorption solvent, desorption time, type and amount of salt-induced demulsifier, and sample volume. Under the optimized extraction and gas chromatography-mass spectrometric conditions, the method revealed good linearity (10-100000 ng/L) with coefficient of determination (R2 ) of ≥0.9951, low limits of detection (3-16 ng/L), high enrichment factors (61-239), and satisfactory analyte recoveries (86.3-109.1%) with the relative standard deviations 
    Matched MeSH terms: Sodium Chloride; Sodium Chloride, Dietary
  12. Agi A, Junin R, Rasol M, Gbadamosi A, Gunaji R
    PLoS One, 2018;13(8):e0200595.
    PMID: 30089104 DOI: 10.1371/journal.pone.0200595
    Treated Rhizopora mucronata tannin (RMT) as a corrosion inhibitor for carbon steel and copper in oil and gas facilities was investigated. Corrosion rate of carbon-steel and copper in 3wt% NaCl solution by RMT was studied using chemical (weight loss method) and spectroscopic (FTIR) techniques at various temperatures in the ranges of 26-90°C. The weight loss data was compared to the electrochemical by the application of Faraday's law for the conversion of corrosion rate data from one system to another. The inhibitive efficiency of RMT was compared with commercial inhibitor sodium benzotriazole (BTA-S). The best concentration of RMT was 20% (w/v), increase in concentration of RMT decreased the corrosion rate and increased the inhibitive efficiency. Increase in temperature increased the corrosion rate and decreased the inhibitive efficiency but, the rate of corrosion was mild with RMT. The FTIR result shows the presence of hydroxyl group, aromatic group, esters and the substituted benzene group indicating the purity of the tannin. The trend of RMT was similar to that of BTA-S, but its inhibitive efficiency for carbon-steel was poor (6%) compared to RMT (59%). BTA-S was efficient for copper (76%) compared to RMT (74%) at 40% (w/v) and 20% (w/v) concentration respectively. RMT was efficient even at low concentration therefore, the use of RMT as a cost effective and environmentally friendly corrosion inhibiting agent for carbon steel and copper is herein proposed.
    Matched MeSH terms: Sodium Chloride/chemistry*
  13. Ng HS, Ng TC, Kee PE, Tan JS, Yim HS, Lan JC
    J Biosci Bioeng, 2020 Feb;129(2):237-241.
    PMID: 31629635 DOI: 10.1016/j.jbiosc.2019.08.013
    Aqueous biphasic flotation (ABF) integrates aqueous biphasic system (ABS) and solvent sublation for recovery of target biomolecules. The feasibility of the alcohol/salt ABF for exclusive partition of cytochrome c to one specific phase of the system was investigated. Aliphatic alcohols of different carbon chain length (ethanol, 1-propanol and 2-propanol) and salts (sulfate, phosphate and citrate) were used for the phase formation. The effects of phase composition, concentration of sample loading, pH, flotation time and flow rate of the system on the partition efficiency of cytochrome c were determined. Cytochrome c was exclusively partitioned to the alcohol-rich top phase of the ABF of 18% (w/w) ethanol and 26% (w/w) ammonium sulfate with pH 6 and 20% (w/w) of sample loading. Highest partition coefficient (K) of 6.85 ± 0.21 and yield (YT) of 99.40% ± 0.02 were obtained with optimum flotation rate of 10 mL/min and flow rate of 10 min.
    Matched MeSH terms: Sodium Chloride/chemistry
  14. Shahar S, You YX, Zainuddin NS, Michael V, Ambak R, Haron H, et al.
    BMJ Open, 2019 05 27;9(5):e025068.
    PMID: 31133578 DOI: 10.1136/bmjopen-2018-025068
    OBJECTIVE: To investigate the sodium content in sauces sold in Malaysian supermarkets.

    METHODS: A cross-sectional market survey was conducted in 2017 of 233 sauces sold in Malaysian supermarkets. Information on the sodium content was collected from the product packaging and nutrient information panels of the sauces sold in the seven top supermarkets in the capital of Malaysia.

    RESULTS: Of the 233 sauces surveyed, 116 did not include sodium content information on the nutrient information panel (49.8%). Soy sauce (particularly sweet soy sauce) and ketchup (particularly chilli sauce) were found to be the highest number of products surveyed in the analysis (N=54 and N=48, respectively). The highest sodium content information was displayed by fish/prawn sauce (budu/cencalok) (5192±3228 mg/100 g) which was followed by the light/thin soy sauce (5116±2084 mg/100 g), and followed by salty soy sauce (4780±988 mg/100 g). The sodium content information of the imported sauces was higher compared with local products produced in Malaysia. However, for sweet soy sauce, the sodium content information of the local products was higher compared with the imported products. Of the 116 sauces which displayed information regarding their sodium content, only 18.2% of the salty soy sauce and 25% of the light/thin soy sauce were found to be below the 2017 Malaysian sodium guidelines. Furthermore, only 21.7% of chilli ketchup and no tomato ketchup were below the 2017 UK salt guidelines.

    CONCLUSIONS: Almost half of the sauces surveyed did not include sodium content information on the nutrient information panel. It is recommended that sodium content information is provided on all sauces sold in Malaysia. Also, manufacturers should be urged to reduce the sodium content level of their sauces to a minimum of 5%.

    Matched MeSH terms: Sodium Chloride; Sodium Chloride, Dietary
  15. Mohd Isa D, Shahar S, He FJ, Majid HA
    Nutrients, 2021 Dec 17;13(12).
    PMID: 34960086 DOI: 10.3390/nu13124534
    Health literacy has been recognized as a significant social determinant of health, defined as the ability to access, understand, appraise, and apply health-related information across healthcare, disease prevention, and health promotion. This systematic review aims to understand the relationship between health literacy, blood pressure, and dietary salt intake. A web-based search of PubMed, Web of Science, CINAHL, ProQuest, Scopus, Cochrane Library, and Prospero was performed using specified search/MESH terms and keywords. Two reviewers independently performed the data extraction and analysis, cross-checked, reviewed, and resolved any discrepancies by the third reviewer. Twenty out of twenty-two studies met the inclusion criteria and were rated as good quality papers and used in the final analysis. Higher health literacy had shown to have better blood pressure or hypertension knowledge. However, the relationship between health literacy with dietary salt intake has shown mixed and inconsistent findings. Studies looking into the main four domains of health literacy are still limited. More research exploring the links between health literacy, blood pressure, and dietary salt intake in the community is warranted. Using appropriate and consistent health literacy tools to evaluate the effectiveness of salt reduction as health promotion programs is required.
    Matched MeSH terms: Sodium Chloride, Dietary/administration & dosage*
  16. Lam MQ, Nik Mut NN, Thevarajoo S, Chen SJ, Selvaratnam C, Hussin H, et al.
    3 Biotech, 2018 Feb;8(2):104.
    PMID: 29404232 DOI: 10.1007/s13205-018-1133-2
    A halophilic bacterium, Virgibacillus sp. strain CD6, was isolated from salted fish and its extracellular protease was characterized. Protease production was found to be highest when yeast extract was used as nitrogen source for growth. The protease exhibited stability at wide range of salt concentration (0-12.5%, w/v), temperatures (20-60 °C), and pH (4-10) with maximum activity at 10.0% (w/v) NaCl, 60 °C, pH 7 and 10, indicating its polyextremophilicity. The protease activity was enhanced in the presence of Mg2+, Mn2+, Cd2+, and Al3+ (107-122% relative activity), and with retention of activity > 80% for all of other metal ions examined (K+, Ca2+, Cu2+, Co2+, Ni2+, Zn2+, and Fe3+). Both PMSF and EDTA inhibited protease activity, denoting serine protease and metalloprotease properties, respectively. High stability (> 70%) was demonstrated in the presence of organic solvents and detergent constituents, and the extracellular protease from strain CD6 was also found to be compatible in commercial detergents. Proteinaceous stain removal efficacy revealed that crude protease of strain CD6 could significantly enhance the performance of commercial detergent. The protease from Virgibacillus sp. strain CD6 could serve as a promising alternative for various applications, especially in detergent industry.
    Matched MeSH terms: Sodium Chloride; Sodium Chloride, Dietary
  17. Jaziri AA, Shapawi R, Mohd Mokhtar RA, Md Noordin WN, Huda N
    PeerJ, 2022;10:e13103.
    PMID: 35310170 DOI: 10.7717/peerj.13103
    BACKGROUND: Lizardfish (Saurida tumbil Bloch, 1795) bone is a fish by-product generated during industrial surimi processing. This by-product is an important source of collagen production since the use of terrestrial animal-based collagens no longer sought due to concern regarding the transfer of infectious diseases and religious issues. Hence, this study was carried out to determine the biochemical analysis of collagens from the bone of lizardfish extracted with different acids.

    METHODS: Lizardfish bone collagens were extracted with various acids (i.e., acetic, lactic and citric acids). All extraction processes were conducted in a chiller room (4 °C). The extracted collagens were biochemically characterized, such as hydroxyproline content, Ultraviolet (UV) absorption, X-ray diffraction (XRD), Fourier transform infrared spectroscopy spectra (FTIR), Differential scanning calorimetry (DSC) and solubility in different pH values and NaCl concentrations.

    RESULTS: The yield of extracted collagens ranged between 1.73% and 2.59%, with the highest (p 

    Matched MeSH terms: Sodium Chloride*
  18. Ambak R, He FJ, Othman F, Michael V, Mohd Yusoff MF, Aris T
    J Health Popul Nutr, 2021 05 31;40(Suppl 1):23.
    PMID: 34059145 DOI: 10.1186/s41043-021-00229-y
    BACKGROUND: Recognising that excessive dietary salt intake is associated with high blood pressure and adverse cardiovascular health, the Ministry of Health Malaysia conducted the Malaysian Community Salt Survey (MyCoSS) among Malaysian adults. This paper introduced MyCoSS projects and presented findings on the salt intake of the Malaysian adult population.

    METHODS: MyCoSS was a nationally representative survey, designed to provide valuable data on dietary salt intake, sources of salt in the diet, and knowledge, perception, and practice about salt among Malaysian adults. It was a cross-sectional household survey, covering Malaysian citizens of 18 years old and above. Multi-stage-stratified sampling was used to warrant national representativeness. Sample size was calculated on all objectives studied, and the biggest sample size was derived from the knowledge on the effect of high salt on health (1300 participants). Salt intake was estimated using a single 24-h urine collection and its sources from a food frequency questionnaire. Knowledge, attitude, and practice were determined from a pre-tested questionnaire. All questionnaires were fully administered by trained interviewers using mobile devices. Anthropometric indices (weight, height, and waist circumference) and blood pressure were measured using a standardised protocol. Ethical approvals were obtained from the Medical Research Ethics Committee, Ministry of Health Malaysia, and Queen Mary University of London prior to conducting the survey.

    RESULTS: Findings showed that the average sodium intake of Malaysian adults (3167 mg/day) was higher than the WHO recommendation of 2000 mg/day. Daily intake was significantly higher among males and individuals with higher BMI and higher waist circumference.

    CONCLUSION: Salt intake in the Malaysian population was higher than the WHO recommendation. MyCoSS's findings will be used for the development and implementation of national salt reduction policy. A successful implementation of a national salt reduction programme in Malaysia will benefit the whole population.

    Matched MeSH terms: Sodium Chloride, Dietary*
  19. Veronica N, Heng PWS, Liew CV
    Mol Pharm, 2024 May 06;21(5):2484-2500.
    PMID: 38647432 DOI: 10.1021/acs.molpharmaceut.4c00031
    Excipients are ubiquitous in pharmaceutical products, and often, they can also play a critical role in maintaining product quality. For a product containing a moisture-sensitive drug, moisture can be deleterious to the product stability during storage. Therefore, using excipients that interact with moisture in situ can potentially alleviate product stability issues. In this study, the interactive behavior of starch with moisture was augmented by coprocessing maize starch with sodium chloride (NaCl) or magnesium nitrate hexahydrate [Mg(NO3)2·6H2O] at different concentrations (5 and 10%, w/w). The effect of the formulation on drug stability was assessed through the degradation of acetylsalicylic acid, which was used as the model drug. The results showed that coprocessing of the starch with either NaCl or Mg(NO3)2·6H2O impacted the number of water molecule binding sites on the starch and how the sorbed moisture was distributed. The coprocessed excipients also resulted in lower drug degradation and lesser changes in tablet tensile strength during post-compaction storage. However, corresponding tablet formulations containing physical mixtures of starch and salts did not yield promising outcomes. This study demonstrated the advantageous concomitant use of common excipients by coprocessing to synergistically mitigate the adverse effects of moisture and promote product stability when formulating a moisture-sensitive drug. In addition, the findings could help to improve the understanding of moisture-excipient interactions and allow for the judicious choice of excipients when designing formulations containing moisture-sensitive drugs.
    Matched MeSH terms: Sodium Chloride/chemistry
  20. Tan PC, Norazilah MJ, Omar SZ
    Obstet Gynecol, 2013 Feb;121(2 Pt 1):291-298.
    PMID: 23232754 DOI: 10.1097/AOG.0b013e31827c5e99
    OBJECTIVE: To compare 5% dextrose-0.9% saline against 0.9% saline solution in the intravenous rehydration of hyperemesis gravidarum.

    METHODS: Women at their first hospitalization for hyperemesis gravidarum were enrolled on admission to the ward and randomly assigned to receive either 5% dextrose-0.9% saline or 0.9% saline by intravenous infusion at a rate 125 mL/h over 24 hours in a double-blind trial. All participants also received thiamine and an antiemetic intravenously. Oral intake was allowed as tolerated. Primary outcomes were resolution of ketonuria and well-being (by 10-point visual numerical rating scale) at 24 hours. Nausea visual numerical rating scale scores were obtained every 8 hours for 24 hours.

    RESULTS: Persistent ketonuria rates after the 24-hour study period were 10 of 101 (9.9%) compared with 11 of 101 (10.9%) (P>.99; relative risk 0.9, 95% confidence interval 0.4-2.2) and median (interquartile range) well-being scores at 24 hours were 9 (8-10) compared with 9 (8-9.5) (P=.73) in the 5% dextrose-0.9% saline and 0.9% saline arms, respectively. Repeated measures analysis of variance of the nausea visual numerical rating scale score as assessed every 8 hours during the 24-hour study period showed a significant difference in favor of the 5% dextrose-0.9% saline arm (P=.046) with the superiority apparent at 8 and 16 hours, but the advantage had dissipated by 24 hours. Secondary outcomes of vomiting, resolution of hyponatremia, hypochloremia and hypokalemia, length of hospitalization, duration of intravenous antiemetic, and rehydration were not different.

    CONCLUSIONS: Intravenous rehydration with 5% dextrose-0.9% saline or 0.9% saline solution in women hospitalized for hyperemesis gravidarum produced similar outcomes.

    CLINICAL TRIAL REGISTRATION: ISRCTN Register, www.controlled-trials.com/isrctn, ISRCTN65014409.

    LEVEL OF EVIDENCE: I.

    Matched MeSH terms: Sodium Chloride/therapeutic use*
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links