Displaying publications 741 - 760 of 772 in total

Abstract:
Sort:
  1. Fulltext Properties of proteolytic enzyme from ginger (Zingiber officinale Roscoe)
    Nafi’, A., Foo, H.L., Jamilah, B., Ghazali. H.M.
    International Food Research Journal, 2013;20(1):363-368.
    MyJurnal
    Proteases in ginger rhizome have the potentials in industrial applications. This study was conducted to extract and characterize the proteolytic enzyme from ginger (Zingiber officinale Roscoe). Ginger protease (GP) was extracted from ginger rhizome by homogenization with 100 mM potassium phosphate buffer pH 7.0 containing 10 mM cysteine and 5 mM EDTA which were found to be the most efficient extraction buffer and stabilizers. After centrifugation at 10,500 x g, protein in the crude extract was precipitated using 60% ammonium sulfate following which the precipitate was redissolved in 50 mM potassium phosphate buffer pH 7.0, dialyzed and then lyophilized. The extraction method yielded 0.94% (w/w of fresh weight) of GP with a specific activity of 27.6 ± 0.1 Unit/mg protein where 1 Unit is defined as the amount of protease causing an increase in absorbance by 1 unit per minute using azocasein as the substrate. Results show that the GP was completely inhibited by heavy metal cations i.e. Cu2+and Hg2+, and a thiol blocking agent or inhibitor, n-ethyl maleimide (NEM), indicating that GP is most probably a cysteine protease. The enzyme has an optimum temperature at 60⁰C and the optimum pH ranged between pH 6 to 8. Monovalent cations (K+ and Na+) have no significant effect on activity of GP, but divalent and trivalent cations showed moderate inhibitory effect. Detergents such as sodium dodecyl sulfate increased the activity of GP while Tween 80 and Tween 20 slightly reduced the activity.
    Matched MeSH terms: Metals, Heavy
  2. Fulltext Characterization of Edwardsiella tarda isolated from Asian Seabass, Lates calcarifer
    Nadirah, M., Najiah M., Teng, S. Y.
    International Food Research Journal, 2012;19(3):1247-1252.
    MyJurnal
    This study described the antibiotic and heavy metal resistance pattern of 17 isolates of Edwardsiella tarda obtained from Asian seabass (Lates calcarifer). E.tarda isolates were resistant to oleandomycin, lincomycin, novobiocin and spiramycin. In contrast, most of the isolates showed high level of susceptibility to tetracycline, doxycycline, florfenicol, chloramplenicol, nitrofurantoin, fosfomycin, kanamycin, oxolinic acid and flumequine. MAR value was 0.35 which indicated that the cultured Asian seabass have received high exposure to those tested antibiotics. Besides, very high level of heavy metal resistance among these isolates was observed. Genotypic profile of DNA fingerprintings generated by RAPD-PCR using M13 universal primer and M13 wild type phage primer showed high degree of genetic diversity with percentages similarity and genetic distance among the isolates were ranging from 10.5% to 100% and 0 to 0.895, respectively. This result indicates that strains that belong to the same origin were not always closely related genetically.
    Matched MeSH terms: Metals, Heavy
  3. The chemical, heavy metal and microbial quality of well water in an urbanised village in the Klang Valle
    Stephen Ambu, Stacey Foong Yee Yong, Yvonne Ai Lian Lim, Mak Joon Wah, Donald Koh Fook Chen, Soo Shen Ooi, et al.
    International e-Journal of Science, Medicine & Education, 2014;8(3):28-44.
    MyJurnal
    Background: The public health issue of consuming groundwater is a major concern because people often extract groundwater directly from the aquifers either through wells or boreholes without treating it with any form of filtration system or chlorine disinfection. Based on the Malaysian National Drinking Water guidelines the current study was designed to provide a better understanding on the variable factors that are influencing the quality of well-water in an urbanised village in Malaysia. Well water quality assessment of heavy metals, chemicals, microbial and physical parameters were carried out for Sungai Buloh Village in the Klang Valley to ensure it was safe for human consumption.

    Materials and Methods: Water samples were collected from wells at four sites (Sites A,B,C,D), a river and a tap inside a house in Sungai Buloh village. Soil was sampled from the riverbed and area surrounding the wells. Samples were collected every two months over a one year duration from all sites. The water samples were processed and examined for viruses, coliforms and protozoa as well as for heavy metal contaminants.

    Results: The turbidity and colour ranged in the average of 0.57-0.13 Nephelometric Turbidity (NTU) and 4.16-5.00 Total Conjunctive Use (TCU) respectively for all sites except Site C. At Site C the turbidity level was 2.56 ± 1.38 NTU. The well-water was polluted with coliforms (1.2 to 2.4 x 103 CFU/100 ml) in all sites, E. coli (0.12 - 4 x 102 CFU/100 ml CFU/ 100 ml) and Cryptosporidium oocysts (0.4 cysts/100 ml). All the heavy metals and chemical parameters were within the Malaysian Guidelines’ limits except manganese. The average pH ranged from 5.44 - 6.62 and the temperature was 28 ºC.

    Conclusion: In summary, the well water at Sungai Buloh is considered unsafe for consumption due to pollution. Therefore the major thrust will be to provide better quality of drinking water to the residents of the village.
    Matched MeSH terms: Metals, Heavy
  4. Construction and demolition waste generation rates for high-rise buildings in Malaysia
    Mah CM, Fujiwara T, Ho CS
    Waste Manag Res, 2016 Dec;34(12):1224-1230.
    PMID: 27637272
    Construction and demolition waste continues to sharply increase in step with the economic growth of less developed countries. Though the construction industry is large, it is composed of small firms with individual waste management practices, often leading to the deleterious environmental outcomes. Quantifying construction and demolition waste generation allows policy makers and stakeholders to understand the true internal and external costs of construction, providing a necessary foundation for waste management planning that may overcome deleterious environmental outcomes and may be both economically and environmentally optimal. This study offers a theoretical method for estimating the construction and demolition project waste generation rate by utilising available data, including waste disposal truck size and number, and waste volume and composition. This method is proposed as a less burdensome and more broadly applicable alternative, in contrast to waste estimation by on-site hand sorting and weighing. The developed method is applied to 11 projects across Malaysia as the case study. This study quantifies waste generation rate and illustrates the construction method in influencing the waste generation rate, estimating that the conventional construction method has a waste generation rate of 9.88 t 100 m(-2), the mixed-construction method has a waste generation rate of 3.29 t 100 m(-2), and demolition projects have a waste generation rate of 104.28 t 100 m(-2).
    Matched MeSH terms: Metals
  5. Fulltext A rapid inhibitive enzyme assay for monitoring heavy metals pollution in the Juru Industrial Estate
    Halmi, M.I.E., Baskaran Gunasekaran, Othman, A.R., Shukor, M.Y., Kamaruddin, K., Dahalan, F.A., et al.
    Bioremediation Science and Technology Research, 2015;3(2):7-12.
    MyJurnal
    The volume of contaminated rivers in Malaysia continues to keep rising through the years. The
    cost of instrumental monitoring is uneconomical and prohibits schedule monitoring of
    contaminants particularly heavy metals. In this work, a rapid enzyme assay utilizing the
    molybdenum-reducing enzyme as an inhibitive assay, prepared in crude form from the
    molybdenum-reducing bacterium Serratia sp. strain DRY5 has been developed for monitoring
    the heavy metals mercury, silver, copper and chromium in contaminated waters in the Juru
    Industrial Estate. The crude enzyme extract transformed soluble molybdenum
    (phosphomolybdate) into a deep blue solution, which is inhibited by heavy metals such as
    mercury, silver, copper and chromium. The IC50 and Limits of Detection (LOD) values for
    mercury, copper, silver and cadmium were 0.245, 0.298, 0.367, 0.326, and 0.124, 0.086, 0.088
    and 0.094 mg L-1, respectively. The assay is rapid, and can be carried out in less than 10 minutes.
    In addition, the assay can be carried out at ambient temperature. The IC50 values for these heavy
    metals are more sensitive than several established assays. Water samples from various locations
    in the month of November from the Juru Industrial Estate (Penang) were tested for the presence
    of heavy metals using the developed assay. Enzyme activity was nearly inhibited for water
    samples from several locations. The presence of heavy metals was confirmed instrumentally
    using Atomic Emission Spectrometry and a Flow Injection Mercury System. The assay is rapid
    and simple and can be used as a first screening method for large scale monitoring of heavy
    metals.
    Matched MeSH terms: Metals, Heavy
  6. Fulltext The association of reported respiratory symptoms among children in Malaysia with particulate matter exposure in municipal solid waste landfills
    Dora Esphylin, Sharifah Norkhadijah Syed Ismail, Sarva Mangala Praveena, Zailina Hashim, Emilia Zainal Abidin
    Malaysian Journal of Medicine and Health Sciences, 2018;14(101):2-11.
    MyJurnal
    Background: Prolonged exposure of heavy metals in the respirable particulate matter (PM10) from municipal solid waste (MSW) landfills may affect children health. Objective: To investigate the association of reported respiratory symptom with heavy metals in PM10, with heavy metals in fingernails among children residing close to MSW landfills. Methods: Two groups of children age 7 to 12 years old were involved in this cross-sectional study. Those residing within 3 km radius from a landfill were the exposed group and those residing more than 3 km radius as the unexposed group. Questionnaires adapted from American Thoracic Society were applied in the survey. Fingernails were used as biomarker. Ten heavy metals elements in PM and fingernail samples were analysed using inductively coupled plasma mass spectrometry (ICP-MS). Results: The cadmium, chromium, copper, manganese, nickel and lead concentrations in PM around the MSW landfills and residential areas exceeded the Canada and USEPA standard permissible limit. Heavy metals in fingernails (p
    Matched MeSH terms: Metals, Heavy
  7. Fulltext Isolation and characterization of a heavy metal-reducing Pseudomonas sp. strain Dr.Y Kertih with the ability to assimilate phenol and diesel
    Veeraswamy Kesavan, Abdulrasheed Mansur, Mohd Syahmi Ramzi Salihan, Rahman, M.F., Suhaili, Zarizal, Shukor, M.Y.
    Bioremediation Science and Technology Research, 2018;6(1):14-22.
    MyJurnal
    The indiscriminate released of heavy metals and xenobiotics into soils and aquatic bodies
    severely alter soil organisms and the ecosystem. The isolation of xenobiotics degrading
    microorganisms is cost-effective and naturally pleasant approach. Lately, the toxicological effect
    of molybdenum to the spermatogenesis of several organisms has been record. This present study
    is aimed at the isolation and characterization of a bacterium capable of converting molybdenum
    to the colloidal molybdenum blue. Bacteria characterization was performed in a microplate
    format using resting cells. Thus, the reduction process can be employed as a device for
    molybdenum bioremediation. The results of the study revealed an optimum reduction at pH
    between 6.0 and 6.3 and temperatures of between 25 and 40 oC. Similarly, it was also observed
    that a phosphate concentration not greater than 5.0 mM and a sodium molybdate concentration
    at 20 mM was required for reduction. Glucose was observed as the best carbon source to support
    reduction. Following the scanning of molybdenum blue, it revealed an absorption spectrum
    indicating the characteristics of molybdenum blue as a reduced phosphomolybdate. Molybdenum
    reduction is inhibited by heavy metals like silver, lead, arsenic and mercury. Furthermore, the
    ability of the bacterium (Pseudomonas sp. strain Dr.Y Kertih) to utilize several organic
    xenobiotics such as phenol, acrylamide, nicotinamide, acetamide, iodoacetamide, propionamide,
    acetamide, sodium dodecyl sulfate (SDS) and diesel as electron donor sources for aiding
    reduction or as carbon sources for growth was also examined. Finding showed that none was
    capable of aiding molybdenum reduction, however the bacterium was capable of growing on both
    diesel and phenol as carbon sources. GC analysis was used to confirmed diesel degradation.
    Matched MeSH terms: Metals, Heavy
  8. Fulltext Synthesis, biological evaluation and corrosion inhibition studies of transition metal complexes of Schiff base
    Kashyap S, Kumar S, Ramasamy K, Lim SM, Shah SAA, Om H, et al.
    Chem Cent J, 2018 Nov 20;12(1):117.
    PMID: 30460466 DOI: 10.1186/s13065-018-0487-1
    BACKGROUND: The transition metal complexes formed from Schiff base is regarded as leading molecules in medicinal chemistry. Because of the preparative availability and diversity in the structure of central group, the transition metals are important in coordination chemistry. In the present work, we have designed and prepared Schiff base and its metal complexes (MC1-MC4) and screened them for antimicrobial, anticancer and corrosion inhibitory properties.

    METHODOLOGY: The synthesized metal complexes were characterized by physicochemical and spectral investigation (UV, IR, 1H and 13C-NMR) and were further evaluated for their antimicrobial (tube dilution) and anticancer (SRB assay) activities. In addition, the corrosion inhibition potential was determined by electrochemical impedance spectroscopy (EIS) technique.

    RESULTS AND DISCUSSION: Antimicrobial screening results found complexes (MC1-MC4) to exhibit less antibacterial activity against the tested bacterial species compared to ofloxacin while the complex MC1 exhibited greater antifungal activity than the fluconazole. The anticancer activity results found the synthesized Schiff base and its metal complexes to elicit poor cytotoxic activity than the standard drug (5-fluorouracil) against HCT116 cancer cell line. Metal complex MC2 showed more corrosion inhibition efficiency with high Rct values and low Cdl values.

    CONCLUSION: From the results, we can conclude that complexes MC1 and MC2 may be used as potent antimicrobial and anticorrosion agents, respectively.

    Matched MeSH terms: Metals
  9. Mineral and physiochemical evaluation of cockle shell (Anadara granosa) and other selected molluscan shell as potential biomaterials
    Bharatham H, Md Zuki Abu Bakar Zakaria, Perimal EK, Loqman Mohamad Yusof, Muhajir Hamid
    Sains Malaysiana, 2014;43:1023-1029.
    Molluscan shells are attracting research interest due to the diverse application properties possessed. As shells are very similar to bones, this study was conducted to analyze the mineral and physiochemical composition of Cockle (Anadara granosa) shell and three other types of molluscan shell, namely Strombus canarium, Oliva sayana and Terebra dislocata as potential biomaterial for bone tissue engineering applications. Approximately 200 g of shells from each species were processed and powdered for the purpose of this study. Carbon was analyzed using the carbon analyzer while minerals and heavy metals through ICP-MS. The phase purity and crystallographic structures of the powders were identified using X-Ray Diffractometer (XRD) while the chemical functionality was determined using the Fourier transform infrared (FTIR) spectrophotometer. The analysis showed that Cockle shells contained higher content of calcium and carbon including varying amount of other minor elements comparatively. However, all four types of shell powders were found to contain below detectable levels of toxic elements. Physiochemical analysis on phase purity and crystallographic structures showed similar characteristics of carbonate group present in all four shell types. A predominantly aragonite form of calcium carbonate was detected in both XRD diffractogram and FTIR spectra for all samples. Our findings demonstrated that different types of molluscan shells have almost similar mineral and physiochemical characteristics and a predominantly aragonite form of calcium carbonate that provides a strong basis for their use as a potential bone tissues engineering material.
    Matched MeSH terms: Metals, Heavy
  10. Smart electrical bi-layers lipopeptides: Novel peptidic chains like zigzag map esterified with phospho-glyceride as mono-layer moieties capable in forming a meso-sphere- envelop with scaffold- ability to cellular impurities
    Saadi S, Saari N, Abdulkarim MS, Ghazali HM, Anwar F
    J Control Release, 2018 03 28;274:93-101.
    PMID: 29031897 DOI: 10.1016/j.jconrel.2017.10.011
    Cell impurities are an emerging nucleating molecular barriers having the capability in disordering the metabolic chain reactions of proteolysis, glycolysis and lipolysis. Their massive effects induced by copolymer crystal growth in compaction with metal and mineral transients are extended as well as in damaging DNA and mRNA structure motif and other molecular assembly e.g. histones structure unites. Their polycrystalline packing modes, polydispersity and their tendency to surface and interface adhesion prompted us in structuring scaffold biomaterials enriched with biopeptides, layered by phospho-glycerides ester-forms. The interface tension of the formed map is flexible and dependent to the surface exposure and its collapse modes to the surrounding molecular ligands. Thus, the attempts in increasing surface exposure e.g. the viscoelastic of structured lipopeptides and types of formed network structures interplays an extra- conjugating biomolecules having a least cytotoxicity effects to cells constituents. Disulfides molecules are selected to be the key regulatory element in rejoining both lipidic and proteic moieties by disordering atoms status via chemical ionization using organic catalyst. The insertion of methionine based peptidic chain at the lateral surfaces of scaffold biomaterials enhances the electron-meta-static motions by raising a molecular disordering status at distinct regions of the map e.g. epimerization into a nonpolar side that helps the chemical conjunction of disulfide groups with the esterified phosphoglycerides mono-layers. These effects in turn are accomplished by the formation of meso-sphere nonpolar- vesicles. The oxidation of disulfide group would alter the ordering of initial molecules by raising a newly molecular disorders to the map with high polarity to surface regions. In the same time indicates a continuation in the crystallization growth factor via a low chemical lesions between the impurities and a supersaturation in the intra-atomic distances with maximum cross linking to the deformed ligand with scaffold biomaterials.
    Matched MeSH terms: Metals
  11. Synthesis of chitosan/polyvinyl alcohol/zeolite composite for removal of methyl orange, Congo red and chromium(VI) by flocculation/adsorption
    Habiba U, Siddique TA, Joo TC, Salleh A, Ang BC, Afifi AM
    Carbohydr Polym, 2017 Feb 10;157:1568-1576.
    PMID: 27987870 DOI: 10.1016/j.carbpol.2016.11.037
    A chitosan/polyvinyl alcohol (PVA)/zeolite composite was fabricated in this study. The composite was analyzed through field emission scanning electron microscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis, and weight loss test. FTIR and XRD results revealed a strong interaction among chitosan, PVA, and zeolite. Weight loss test results indicated that the composite was stable in acidic and basic media. Congo red was removed through flocculation, and the removal rate was 94% at an initial concentration of 100mg/L for a dose of 1g/L. The removal rate of methyl orange was controlled by adsorption at an initial concentration of less than 100mg/L. Flocculation occurred at high concentrations. The removal rate was also 94% at an initial concentration of 500mg/L for a dose of 5g/L. The adsorption behavior of the composite for the removal of methyl orange and Cr(VI) was described by using a pseudo-second-order kinetic model. The adsorption capacity of the composite for Cr(VI) was 450mg/g. Therefore, the synthesized composite exhibited versatility during the removal of dyes and heavy metals.
    Matched MeSH terms: Metals, Heavy
  12. Fulltext Composition of amino Acids, fatty acids, minerals and dietary fiber in some of the local and import rice varieties of Malaysia
    Thomas, R., Bhat, Rajeev, Kuang, Y.T.
    International Food Research Journal, 2015;22(3):1148-1155.
    MyJurnal
    In this study, three popular, regionally grown rice varieties (Bario, brown and white) were compared with three of the most popular and highly marketed imported rice varieties (black, glutinous and basmati rice) in Penang region of Malaysia. Rice samples were evaluated for amino acids, fatty acids, minerals, heavy metals and dietary fiber composition. Overall, amino acids content among all the rice samples were comparable to each other. Results with regard to minerals showed potassium to be high in brown rice (197.41 mg/100g), while magnesium was recorded to be high in black rice (107.21 mg/100g). Heavy metals such as cadmium, nickel, mercury and lead, though present, they were in negligible amounts. Among all the rice varieties investigated, the total saturated fatty acid and unsaturated fatty acid content was highest in black rice (5.89%). The soluble dietary fiber was higher in white rice (16.39%), whereas insoluble dietary fiber was high in brown (16.51%) and black rice (14.49%), respectively. Results generated from this study is anticipated to benefit both the health wary consumers (based on their potential nutritional attributes) as well as the local food industries to choose the best rice variety while developing novel rice based food products.
    Matched MeSH terms: Metals, Heavy
  13. Historical atmospheric pollution trends in Southeast Asia inferred from lake sediment records
    Engels S, Fong LSRZ, Chen Q, Leng MJ, McGowan S, Idris M, et al.
    Environ Pollut, 2018 Apr;235:907-917.
    PMID: 29353806 DOI: 10.1016/j.envpol.2018.01.007
    Fossil fuel combustion leads to increased levels of air pollution, which negatively affects human health as well as the environment. Documented data for Southeast Asia (SEA) show a strong increase in fossil fuel consumption since 1980, but information on coal and oil combustion before 1980 is not widely available. Spheroidal carbonaceous particles (SCPs) and heavy metals, such as mercury (Hg), are emitted as by-products of fossil fuel combustion and may accumulate in sediments following atmospheric fallout. Here we use sediment SCP and Hg records from several freshwater lentic ecosystems in SEA (Malaysia, Philippines, Singapore) to reconstruct long-term, region-wide variations in levels of these two key atmospheric pollution indicators. The age-depth models of Philippine sediment cores do not reach back far enough to date first SCP presence, but single SCP occurrences are first observed between 1925 and 1950 for a Malaysian site. Increasing SCP flux is observed at our sites from 1960 onward, although individual sites show minor differences in trends. SCP fluxes show a general decline after 2000 at each of our study sites. While the records show broadly similar temporal trends across SEA, absolute SCP fluxes differ between sites, with a record from Malaysia showing SCP fluxes that are two orders of magnitude lower than records from the Philippines. Similar trends in records from China and Japan represent the emergence of atmospheric pollution as a broadly-based inter-region environmental problem during the 20th century. Hg fluxes were relatively stable from the second half of the 20th century onward. As catchment soils are also contaminated with atmospheric Hg, future soil erosion can be expected to lead to enhanced Hg flux into surface waters.
    Matched MeSH terms: Metals, Heavy
  14. Effective removal of lead (II) ions by dead calcareous skeletons: sorption performance and influencing factors
    Lim AP, Zulkeflee Z, Aris AZ
    Water Sci Technol, 2016 Oct;74(7):1577-1584.
    PMID: 27763337
    Dead calcareous skeletons (CSs) as low-cost adsorbents were studied to remove lead ions (Pb (II)) in an aqueous solution. Factors influencing the efficiency of CSs were evaluated by adsorbent size, contact time, initial concentration, dosage concentration and pH. The optimum CS size for removal of Pb (II) was 710 μm at an equilibrium time of 720 min. The best dosage of CS was 10 g/L for a 99% removal efficiency without pH adjustment. Pb (II) ions were effectively removed in the initial pH of the metal solution. CS was able to remove a high concentration (100 mg/L) of Pb (II) at a removal efficiency of 99.92% and at an adsorption capacity of 13.06 mg/g. Our results demonstrated the potential of CS as a metal adsorbent in the aqueous phase with a high-removal efficiency and distinct physical characteristics.
    Matched MeSH terms: Metals
  15. Recent advances in the application of silica nanostructures for highly improved water treatment: a review
    Salman M, Jahan S, Kanwal S, Mansoor F
    Environ Sci Pollut Res Int, 2019 Jul;26(21):21065-21084.
    PMID: 31124071 DOI: 10.1007/s11356-019-05428-z
    The demand for high-quality safe and clean water supply has revolutionized water treatment technologies and become a most focused subject of environmental science. Water contamination generally marks the presence of numerous toxic and harmful substances. These contaminants such as heavy metals, organic and inorganic pollutants, oil wastes, and chemical dyes are discharged from various industrial effluents and domestic wastes. Among several water treatment technologies, the utilization of silica nanostructures has received considerable attention due to their stability, sustainability, and cost-effective properties. As such, this review outlines the latest innovative approaches for synthesis and application of silica nanostructures in water treatment, apart from exploring the gaps that limit their large-scale industrial application. In addition, future challenges for improved water remediation and water quality technologies are keenly discussed.
    Matched MeSH terms: Metals, Heavy
  16. Effects of deep frying on proximate composition and micronutrient of Indian mackerel (Rastrelliger kanagurta), eel (Monopterus albus) and cockle (Anadara granosa)
    Rahman MM, Zamri M, Fadilla N
    Pak J Biol Sci, 2012 Jun 15;15(12):589-94.
    PMID: 24191621
    This study was conducted to determine the proximate composition and four micronutrients (Cd, Cu, Mn and Zn) of Indian Mackerel (Rastrelliger kanagurta), Eel (Monopterus albus) and Cockle (Anadara granosa). All fish and shellfish were purchased from local fish market in Kuantan city. All samples of each species were mixed and divided into two groups based on random selection. Each group were again divided into 3 sub-groups which were considered as replications. The first group were kept uncooked. The second group were fried in a beaker of 400 mL palm cooking oil capacity at a temperature approximately of 180 degrees C for a 15 min period. Both raw and fried samples were analysed following standard methods to determine protein, lipid, ash, moisture, carbohydrate, Cd, Cu, Mn and Zn contents. Results showed that protein content was higher in Indian mackerel and eel than cockle while overall Cd, Cu, Mn and Zn contents were higher in cockle than Indian mackerel and eel. Therefore, fish is better than shellfish in the nutritional point of view. Fried fish and shellfish had very high fat content. Therefore, frying cannot be recommended to prepare a healthy diet. More research is needed including all cooking methods of fish to know the nutritional changes by each cooking method. Fish contains many important fatty acids and amino acids which might be lost during frying. Therefore, future study should include the effects of different cooking methods on amino acids and fatty acids compositions of fish and shellfish.
    Matched MeSH terms: Metals
  17. Fulltext Acute Wound Healing Potential of Marine Worm, Diopatra claparedii Grube, 1878 Aqueous Extract on Sprague Dawley Rats
    Che Soh N', Rapi HS, Mohd Azam NS, Santhanam RK, Assaw S, Haron MN, et al.
    Evid Based Complement Alternat Med, 2020;2020:6688084.
    PMID: 33488747 DOI: 10.1155/2020/6688084
    Diopatra claparedii which is colloquially known as Ruat Sarung can be found along the west coast of Peninsular Malaysia. The species has a unique ability to regenerate anterior and posterior segments upon self-amputation or injury, thus having potential as a wound healing promoter. In this study, the wound healing potential of D. claparedii aqueous extract on acute wound model in rats was revealed for the first time. Various concentrations (0.1%, 0.5%, and 1.0% w/w) of D. claparedii ointment were formulated and tested on Sprague Dawley rats through topical application on full-thickness skin wounds for 14 days. The wound healing effects were investigated via behaviour observation, wound contraction, and histopathological analysis. Quality assessment was performed via skin irritation test, microbial contamination test (MCT), and heavy metal detection. The study also included test for antibacterial activities and detection of bioactive compounds in D. claparedii. One percent of D. claparedii ointment showed rapid wound healing potential with good soothing effects and more collagen deposition in comparison to the commercial wound healing ointments such as acriflavine (0.1% w/v) and traditional ointment gamat (sea cucumber extract) (15.0% w/v). No local skin irritation, microbial contamination, and insignificant concentration of heavy metals were observed, which indicate its safe application. Moreover, the aqueous extract of D. claparedii exhibited antibacterial activities against Escherichia coli and Pseudomonas aeruginosa with minimum inhibitory concentration (MIC) value at 0.4 g/ml. 1H NMR analysis of the aqueous extract of D. claparedii revealed some metabolites that might be responsible for its wound healing properties such as amino acids, halogenated aromatics, organic acids, vitamins, and others. Altogether, these results suggested that the aqueous extract of D. claparedii could be utilised as an alternative natural wound healing promoter.
    Matched MeSH terms: Metals, Heavy
  18. Fulltext Antioxidant Capacity, Cytotoxicity, and Acute Oral Toxicity of Gynura bicolor
    Teoh WY, Sim KS, Moses Richardson JS, Abdul Wahab N, Hoe SZ
    Evid Based Complement Alternat Med, 2013;2013:958407.
    PMID: 24369485 DOI: 10.1155/2013/958407
    Gynura bicolor (Compositae) which is widely used by the locals as natural remedies in folk medicine has limited scientific studies to ensure its efficacy and nontoxicity. The current study reports the total phenolic content, antioxidant capacity, cytotoxicity, and acute oral toxicity of crude methanol and its fractionated extracts (hexane, ethyl acetate, and water) of G. bicolor leaves. Five human colon cancer cell lines (HT-29, HCT-15, SW480, Caco-2, and HCT 116), one human breast adenocarcinoma cell line (MCF7), and one human normal colon cell line (CCD-18Co) were used to evaluate the cytotoxicity of G. bicolor. The present findings had clearly demonstrated that ethyl acetate extract of G. bicolor with the highest total phenolic content among the extracts showed the strongest antioxidant activity (DPPH radical scavenging assay and metal chelating assay), possessed cytotoxicity, and induced apoptotic and necrotic cell death, especially towards the HCT 116 and HCT-15 colon cancer cells. The acute oral toxicity study indicated that methanol extract of G. bicolor has negligible level of toxicity when administered orally and has been regarded as safe in experimental rats. The findings of the current study clearly established the chemoprevention potential of G. bicolor and thus provide scientific validation on the therapeutic claims of G. bicolor.
    Matched MeSH terms: Metals
  19. Thin strut bare metal stents in patients with atrial fibrillation: Is there still a need for BMS?
    Leschke M, Waliszewski M, Pons M, Champin S, Nait Saidi L, Mok Heang T, et al.
    Catheter Cardiovasc Interv, 2016 Sep;88(3):358-66.
    PMID: 26650913 DOI: 10.1002/ccd.26261
    OBJECTIVES: This observational study assessed the 9-month clinical outcomes in an « all comers » population with a focus on patients with atrial fibrillation (AF) after thin strut bare metal stenting.

    BACKGROUND: Drug eluting stent (DES) implantation is the treatment of choice for coronary artery disease (CAD) leaving only marginal indications for the use of bare metal stents (BMS). However, selected treatment populations with DES contraindications such as patients who cannot sustain 6-12 months of dual antiplatelet therapy (DAPT) remain candidates for BMS implantations.

    METHODS: Thin strut bare metal stenting in a priori defined subgroups were investigated in a non-randomized, international, multicenter «all comers» observational study. Primary endpoint was the 9-month TLR rate whereas secondary endpoints included the 9-month MACE and procedural success rates.

    RESULTS: A total of 783 patients of whom 98 patients had AF underwent BMS implantation. Patient age was 70.4 ± 12.8 years. Cardiovascular risk factors in the overall population were male gender (78.2%, 612/783), diabetes (25.2%, 197/783), hypertension (64.1%, 502/783), cardiogenic shock (4.9%, 38/783) and end stage renal disease (4.9%, 38/783). In-hospital MACE was 4.1% (30/783) in the overall population. The 9-month TLR rate was 4.5% (29/645) in the non-AF group and 3.3% (3/90) in the AF group (P = 0.613). At 9 months, the MACE rate in the AF-group and non-AF group was not significantly different either (10.7%, 69/645 vs. 6.7%, 6/90; P = 0.237). Accumulated stroke rates were 0.3% (2/645) in the non-AF subgroup at baseline and 1.1% (1/90) in the AF subgroup (P = 0.264).

    CONCLUSION: Bare metal stenting in AF patients delivered acceptably low TLR and MACE rates while having the benefit of a significantly shorter DAPT duration in a DES dominated clinical practice. © 2015 Wiley Periodicals, Inc.

    Matched MeSH terms: Metals*
  20. High level expression and characterization of a novel thermostable, organic solvent tolerant, 1,3-regioselective lipase from Geobacillus sp. strain ARM
    Ebrahimpour A, Rahman RN, Basri M, Salleh AB
    Bioresour Technol, 2011 Jul;102(13):6972-81.
    PMID: 21531550 DOI: 10.1016/j.biortech.2011.03.083
    The mature ARM lipase gene was cloned into the pTrcHis expression vector and over-expressed in Escherichia coli TOP10 host. The optimum lipase expression was obtained after 18 h post induction incubation with 1.0mM IPTG, where the lipase activity was approximately 1623-fold higher than wild type. A rapid, high efficient, one-step purification of the His-tagged recombinant lipase was achieved using immobilized metal affinity chromatography with 63.2% recovery and purification factor of 14.6. The purified lipase was characterized as a high active (7092 U mg(-1)), serine-hydrolase, thermostable, organic solvent tolerant, 1,3-specific lipase with a molecular weight of about 44 kDa. The enzyme was a monomer with disulfide bond(s) in its structure, but was not a metalloenzyme. ARM lipase was active in a broad range of temperature and pH with optimum lipolytic activity at pH 8.0 and 65°C. The enzyme retained 50% residual activity at pH 6.0-7.0, 50°C for more than 150 min.
    Matched MeSH terms: Metals/pharmacology
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links