MyMedR

Displaying publications 581 - 600 of 772 in total

Abstract:

Sort:

Fulltext Hummingbird-Leaves-Reared Black Soldier Fly Prepupae: Assessment of Nutritional and Heavy Metal Compositions

Kuppusamy G, Kong CK, Segaran GC, Tarmalingam E, Herriman M, Ismail MF, et al.

Biology (Basel), 2020 Sep 05;9(9).
PMID: 32899563 DOI: 10.3390/biology9090274

Black soldier fly (BSF) larva is an attractive animal feed replacer due to its noticeable nutritional content. However, the conventional rearing method often resulted in BSF with undesirably high heavy metal residues that are harmful to animals. In this work, putrefied Sesbania grandiflora (S. Grandiflora) leaves were employed as feed to rear BSF larvae. The resultant BSF prepupae were found to contain 43.5% protein and 16.7% fat, reflecting a comparable protein content and a 2-fold reduction in crude fat than those reared using conventional kitchen waste. Moreover, high quantities of arginine (25.4 g/kg dry matter basis (DM)), carnitine (32.9 g/kg DM), and short-chain fatty acids, including lauric (40.00%), palmitic (19.20%), and oleic (12.10%) acids, have also been noticed in the BSF prepupae. Furthermore, the BSF larvae have been recorded with 0.185 mg/kg chromium, 0.380 mg/kg selenium, and mercury below the detection limit, which is far lower than those reared using conventional kitchen and agricultural wastes (≈1.7 mg/kg chromium, 1.2 mg/kg selenium, and 0.2 mg/kg mercury). Overall, the study shows that the nutritional quality of BSF prepupae is extensively improved when using S. Grandiflora as their feed. The resultant BSF prepupae may serve as an alternative feed for animal rearing.

Matched MeSH terms: Metals, Heavy
Fulltext Growth and metal uptake of spinach with application of co-compost of cat manure and spent coffee ground

Mohd Noor Keeflee SNK, Wan Mohd Zain WNA, Mohd Nor MN, Jamion NA, Yong SK

Heliyon, 2020 Sep;6(9):e05086.
PMID: 33015401 DOI: 10.1016/j.heliyon.2020.e05086

Cat manure (CM) possesses high level of nutrients for growing food crop. However, animal manure may contain toxic elements that may contaminate food crop. Spent coffee ground (SCG) may be used to reduce mobility of heavy metals and reduce crop uptake. In this study, SCG was composted with CM for 31 days to produce a co-compost (SCG-CM) for growing spinach (Spinacia oleracea). The growth rate of spinach was assessed until its maturity, and the metal uptake of spinach shoot was determined thereafter using inductively coupled plasma-optical emission spectroscopy (ICP-OES). The effect of soil treatment with SCG-CM on the height and elemental composition of spinach were compared with that of chicken manure compost (CMC). The prepared composts were primarily organic matter (72.9-81.4 % w/w) with the rest are ash (13.3-23.4 % w/w) and moisture (1.2-2.6 % w/w). Zinc content in SCG-CM (1261 ± 0.1 mg/kg) is significantly higher than that of soil and CMC (p < 0.05) and has exceeded the maximum permissible limit set by European Union Standard (2002) and the Malaysian Compost Quality Standard and Guidelines (2000). Matured spinach reached maximum plant height after 33 days. The amendment of SCG-CM significantly increased the height of spinach (32 ± 6 cm) compared to that of CMC (13 ± 1 cm) (p < 0.05). However, contents of Zn, Cu, Pb and Cd were not increased for spinach grown in the SCG-CM-amended soil, and the level of those elements are below permissible limit set by the Malaysian Food Act 1983 and Food Regulations 1985. This study shows that SCG-CM is effective in improving yield without causing accumulation of toxic trace elements in spinach.

Matched MeSH terms: Metals, Heavy
Fulltext Ipomea aquatica crude extract inhibits lipoxygenase, hyaluronidase and xanthine oxidase activities

Muhammad Helmi Nadri, Kian, Kai Cheng, Pei, Ying Ong, Hong, Yeng L., Nor Zalina Othman, Nur Fashya Musa, et al.

Journal of Academia Universiti Teknologi MARA Negeri Sembilan, 2020;8(2):9-14.
MyJurnal

Ipomea aquatica, locally known as water spinach, is one of the most common vegetable consumed by
Malaysian. Based on previous studies, crude extract and phenolic compounds of I. aquatica exhibited
several biological activities including antioxidant, anti-microbial and anti-proliferative. The presence
of phenolic compounds in I. aquatica may contributed to their ability to inhibit enzymes, chelate
metals and scavenge free radicals. Currently, no study reported on anti-inflammatory activity of I.
aquatica with respect to lipoxygenase, hyaluronidase and xanthine oxidase enzymes. The present
study aims to enhance current knowledge on biological properties of I. aquatica crude extract
particularly on anti-inflammatory activity. Three enzymes that involve in inflammatory pathway were
selected in this study including lipoxygenase, hyaluronidase and xanthine oxidase. I. aquatica was
extracted in methanol and tested for lipoxygenase, hyaluronidase and xanthine oxidase at different
concentrations using direct enzyme inhibition assay. Lipoxygenase, hyaluronidase and xanthine
oxidase inhibitory activities of the methanol crude extract increased with increasing
concentration. Highest inhibition activity against lipoxygenase, hyaluronidase and xanthine oxidase
were observed at a concentration of 1000 µg/ml with inhibition of 87.18%, 95.36% and 78.38%,
respectively. Our finding in this study indicates potential anti-inflammatory activity of I. aquatica
crude extract through inhibition of lipoxygenase, hyaluronidase and xanthine oxidase.

Matched MeSH terms: Metals
Fulltext The use of epoxidised natural rubber latex for developing coloured adhesives

Rohani Abu Bakar, Asrul Mustafa

Journal of Academia Universiti Teknologi MARA Negeri Sembilan, 2020;8(1):58-65.
MyJurnal

Adhesives serve many functions in daily life, starting from sticking envelopes to rejoining broken
materials. Adhesives are usually developed for a specific purpose and the performances can vary
according to their specific end-use. Most of the commercially available adhesives comprised nonrenewable or petroleum derived raw materials. Thus, in order to mitigate negative impact of using nonrenewable material as the raw material for adhesives, a new type of adhesive containing epoxidised
natural rubber (NR) latex is developed. Epoxidised NR latex adhesive was initially prepared and pigment
was subsequently added to produce desired colours of the adhesive. Hence, the newly developed adhesive
can serve as adhesive and also as paint for art. The adhesives were characterised and the results indicated
that they were free from heavy metal contents and volatile organic compounds (VOCs). The adhesives
exhibited comparable odour concentration to commercial synthetic-based adhesive. In terms of toxicity
level, the adhesive developed exhibited low acute oral toxicity. Peel adhesion test of A4 and drawing
papers on stainless steel and glass substrates, opacity and glossiness were also investigated in the present
study. This coloured adhesive is deemed to support the STEM (science, technology, engineering and
mathematics) learning by indirectly imparting polymer science and technology in art education and
further promotes creative learning among school children. The adhesive is also derived from renewable
material rendering it more environmentally friendly.

Matched MeSH terms: Metals, Heavy
Fulltext Isolation and Characterization of Magnetic Oil Palm Empty Fruits Bunch Cellulose Nanofiber Composite as a Bio-Sorbent for Cu(II) and Cr(VI) Removal

Khalid AM, Hossain MS, Ismail N, Khalil NA, Balakrishnan V, Zulkifli M, et al.

Polymers (Basel), 2020 Dec 30;13(1).
PMID: 33396583 DOI: 10.3390/polym13010112

In the present study, magnetic oil palm empty fruits bunch cellulose nanofiber (M-OPEFB-CNF) composite was isolated by sol-gel method using cellulose nanofiber (CNF) obtained from oil palm empty fruits bunch (OPEFB) and Fe3O4 as magnetite. Several analytical methods were utilized to characterize the mechanical, chemical, thermal, and morphological properties of the isolated CNF and M-OPEFB-CNF. Subsequently, the isolated M-OPEFB-CNF composite was utilized for the adsorption of Cr(VI) and Cu(II) from aqueous solution with varying parameters, such as pH, adsorbent doses, treatment time, and temperature. Results showed that the M-OPEFB-CNF as an effective bio-sorbent for the removal of Cu(II) and Cr(VI) from aqueous solution. The adsorption isotherm modeling revealed that the Freundlich equation better describes the adsorption of Cu(II) and Cr(VI) on M-OPEFB-CNF composite. The kinetics studies revealed the pseudo-second-order kinetics model was a better-described kinetics model for the removal of Cu(II) and Cr(VI) using M-OPEFB-CNF composite as bio-sorbent. The findings of the present study showed that the M-OPEFB-CNF composite has the potential to be utilized as a bio-sorbent for heavy metals removal.

Matched MeSH terms: Metals, Heavy
Health risks assessment diagnosis of toxic chemicals (heavy metals) via food crops consumption irrigated with wastewater

Khan MA, Mehmood S, Ullah F, Khattak A, Zeb MA

Sains Malaysiana, 2017;46:917-924.

The present study investigated the concentration of metals in commonly grown vegetables (Luffa acutangula L., Zea mays L., Solanum melongena L.) irrigated with waste water in District Bannu, Khyber Pakhtunkhwa, Pakistan. The pH (5.80) and electrical conductivity (13 dS/m) of waste water indicated the acidic nature that is not suitable for irrigation purposes. Soil and vegetables samples were analyzed for metals concentration through flame atomic absorption spectrometry (Varian FAAS-240). The findings showed that waste water irrigated soil was highly contaminated with Cd (4.62 mg/kg) which was above permissible limits set by European Union Standard (EU 2006, 2002). The concentrations of heavy metals such as Cr and Cd in vegetables were higher than the permissible limits set by World Health Organization/Food and Agriculture Organization U.S.A guidelines 2001. The health hazard quotient (HQ) of waste water irrigated vegetables was observed higher for Ni (0.699-0.1029 mg/kg), (0.0456-0.1040 mg/kg), (0.731-0.0994 mg/kg) in Luffa acutangula, Solanum melongena and Zea mays, respectively. The study concluded that the consumption of commonly grown vegetables in waste water zone of the study area may pose potential health threats in local population.

Matched MeSH terms: Metals, Heavy
Influence of treated palm oil mill effluent sludge on maize (zea mays) growth performance and gas exchange

Mohd Nizar K, Abd Jamil Z, Isharudin M, Hazandy A

Sains Malaysiana, 2018;47:961-969.

The presence of abundant oil palm residues in Malaysia prompted the need to utilize this waste to avoid environmental
pollution. This waste was abundant at the oil palm mill and accounted for almost 50% of production. The study was
conducted to determine the morphological effect of Palm Oil Mill Effluent (POME) sludge on the maize growth performance
and gas exchange. Physicochemical, growth morphology and gas exchange was measured after treated with POME sludge
from different treatment pond systems: Mixing, anaerobic, facultative, algae and dumping. The results indicated the
pH, C, and CEC of mixing the < anaerobic < facultative < algae < dumping ponds. There was a significant presence of
macronutrient (N, Mg, Ca, Fe, S) in the treated POME sludge, contrary to the presence of heavy metal (Cd, Cu, Ni and
Pb) elements which were not significantly different in all the treatments and lower than WHO/FAO standard. Root Shoot
Ratio (RSR) and Specific Leaf Area (SLA) indicated significant difference in biomass accumulation and yield compared to
the control. The gas exchange variable was a significant difference on stomata conductivity (Gs) and transpiration rate
(E). However, the POME sludge from the facultative, algae and dumping ponds showed positive correlations between net
photosynthesis, stomata conductivity and transpiration rate. Indeed, the increased transpiration rate (E) was correlated
with stomata conductance (Gs) after treatment with anaerobic, facultative, algae and dumping ponds. In conclusion, the
POME sludge amendment was able to increase the maize biomass and yield.

Matched MeSH terms: Metals, Heavy
Electrochemical characterization of heat-treated metal and non-metal anodes using mud in microbial fuel cell

Raba’atun Adawiyah Shamsuddin, Wan Ramli Wan Daud, Kim BH, Jamaliah Md. Jahim, Mimi Hani Abu Bakar, Wan Syaidatul Aqma Wan Mohd Noor

Sains Malaysiana, 2018;47:3043-3049.

Microbial fuel cells (MFCs) have a high potential application for simultaneous wastewater treatment and electricity
generation. However, the choice of the electrode material and its design is critical and directly affect their performance.
As an electrode of MFCs, the anode material with surface modifications is an attractive strategy to improve the power
output. In this study, stainless steel (SS) and carbon steel (CS) was chosen as a metal anode, while graphite felt (GF)
was used as a common anode. Heat treatment was performed to convert SS, CS and GF into efficient anodes for MFCs.
The maximum current density and power density of the MFC-SS were achieved up till 762.14 mA/m2
and 827.25 mW/m2
,
respectively, which were higher than MFC-CS (641.95 mA/m2
and 260.14 mW/m2
) and MFC-GF (728.30 mA/m2
and 307.89
mW/m2
). Electrochemical impedance spectroscopy of MFC-SS showed better catalytic activity compared to MFC-CS and
MFC-GF anode, also supported by cyclic voltammetry test.

Matched MeSH terms: Metals
Label-free optical spectroscopy for characterizing binding properties of highly sensitive nanocrystalline cellulose-graphene oxide based nanocomposite towards nickel ion

Daniyal WMEMM, Fen YW, Abdullah J, Sadrolhosseini AR, Saleviter S, Omar NAS

Spectrochim Acta A Mol Biomol Spectrosc, 2019 Apr 05;212:25-31.
PMID: 30594850 DOI: 10.1016/j.saa.2018.12.031

Surface plasmon resonance (SPR) is a label-free optical spectroscopy that is widely used for biomolecular interaction analysis. In this work, SPR was used to characterize the binding properties of highly sensitive nanocrystalline cellulose-graphene oxide based nanocomposite (CTA-NCC/GO) towards nickel ion. The formation of CTA-NCC/GO nanocomposite has been confirmed by FT-IR. The SPR analysis result shows that the CTA-NCC/GO has high binding affinity towards Ni2+ from 0.01 until 0.1 ppm with binding affinity constant of 1.620 × 103 M-1. The sensitivity for the CTA-NCC/GO calculated was 1.509° ppm-1. The full width at half maximum (FWHM), data accuracy (DA), and signal-to-noise ratio (SNR) have also been determined using the obtained SPR curve. For the FWHM, the value was 2.25° at 0.01 until 0.08 ppm and decreases to 2.12° at 0.1 until 10 ppm. The DA for the SPR curves is the highest at 0.01 until 0.08 ppm and lowest at 0.1 until 10 ppm. The SNR curves mirrors the curves of SPR angle shift where the SNR increases with the Ni2+ concentrations. For the selectivity test, the CTA-NCC/GO has the abilities to differentiate Ni2+ in the mixture of metal ions.

Matched MeSH terms: Metals
Function-driven engineering of 1D carbon nanotubes and 0D carbon dots: mechanism, properties and applications

Xu Q, Li W, Ding L, Yang W, Xiao H, Ong WJ

Nanoscale, 2019 Jan 23;11(4):1475-1504.
PMID: 30620019 DOI: 10.1039/c8nr08738e

Metal-free carbonaceous nanomaterials have witnessed a renaissance of interest due to the surge in the realm of nanotechnology. Among myriads of carbon-based nanostructures with versatile dimensionality, one-dimensional (1D) carbon nanotubes (CNTs) and zero-dimensional (0D) carbon dots (CDs) have grown into a research frontier in the past few decades. With extraordinary mechanical, thermal, electrical and optical properties, CNTs are utilized in transparent displays, quantum wires, field emission transistors, aerospace materials, etc. Although CNTs possess diverse characteristics, their most attractive property is their unique photoluminescence. On the other hand, another growing family of carbonaceous nanomaterials, which is CDs, has drawn much research attention due to its cost-effectiveness, low toxicity, environmental friendliness, fluorescence, luminescence and simplicity to be synthesized and functionalized with surface passivation. Benefiting from these unprecedented properties, CDs have been widely employed in biosensing, bioimaging, nanomedicine, and catalysis. Herein, we have systematically presented the fascinating properties, preparation methods and multitudinous applications of CNTs and CDs (including graphene quantum dots). We will discuss how CNTs and CDs have emerged as auspicious nanomaterials for potential applications, especially in electronics, sensors, bioimaging, wearable devices, batteries, supercapacitors, catalysis and light-emitting diodes (LEDs). Last but not least, this review is concluded with a summary, outlook and invigorating perspectives for future research horizons in this emerging platform of carbonaceous nanomaterials.

Matched MeSH terms: Metals
Fulltext Effective production of keratinase by gellan gum-immobilised Alcaligenes sp. AQ05-001 using heavy metal-free and polluted feather wastes as substrates

Yusuf I, Ahmad SA, Phang LY, Yasid NA, Shukor MY

3 Biotech, 2019 Jan;9(1):32.
PMID: 30622870 DOI: 10.1007/s13205-018-1555-x

The ability of gellan gum-immobilised cells of the heavy metal-tolerant bacterium Alcaligenes sp. AQ05-001 to utilise both heavy metal-free and heavy metal-polluted feathers (HMPFs) as substrates to produce keratinase enzyme was studied. Optimisation of the media pH, incubation temperature and immobilisation parameters (bead size, bead number, gellan gum concentration) was determined for the best possible production of keratinase using the one-factor-at-a-time technique. The results showed that the immobilised cells could tolerate a broader range of heavy metal concentrations and produced higher keratinase activity at a gellan gum concentration of 0.8% (w/v), a bead size of 3 mm, bead number of 250, pH of 8 and temperature of 30 °C. The entrapped bacterium was used repeatedly for ten cycles to produce keratinase using feathers polluted with 25 ppm of Co, Cu and Ag as substrates without the need for desorption. However, its inability to tolerate/utilise feathers polluted with Hg, Pb, and Zn above 5 ppm, and Ag and Cd above 10 ppm resulted in a considerable decrease in keratinase production. Furthermore, the immobilised cells could retain approximately 95% of their keratinase production capacity when 5 ppm of Co, Cu, and Ag, and 10 ppm of As and Cd were used to pollute feathers. When the feathers containing a mixture of Ag, Co, and Cu at 25 ppm each and Hg, Ni, Pb, and Zn at 5 ppm each were used as substrates, the immobilised cells maintained their operational stability and biological activity (keratinase production) at the end of 3rd and 4th cycles, respectively. The study indicates that HMPF can be effectively utilised as a substrate by the immobilised-cell system of Alcaligenes sp. AQ05-001 for the semi-continuous production of keratinase enzyme.

Matched MeSH terms: Metals, Heavy
Fulltext Cisplatin-Resistance in Oral Squamous Cell Carcinoma: Regulation by Tumor Cell-Derived Extracellular Vesicles

Khoo XH, Paterson IC, Goh BH, Lee WL

Cancers (Basel), 2019 Aug 14;11(8).
PMID: 31416147 DOI: 10.3390/cancers11081166

Drug resistance remains a severe problem in most chemotherapy regimes. Recently, it has been suggested that cancer cell-derived extracellular vesicles (EVs) could mediate drug resistance. In this study, the role of EVs in mediating the response of oral squamous cell carcinoma (OSCC) cells to cisplatin was investigated. We isolated and characterized EVs from OSCC cell lines showing differential sensitivities to cisplatin. Increased EV production was observed in both de novo (H314) and adaptive (H103/cisD2) resistant lines compared to sensitive H103 cells. The protein profiles of these EVs were then analyzed. Differences in the proteome of EVs secreted by H103 and H103/cisD2 indicated that adaptation to cisplatin treatment caused significant changes in the secreted nanovesicles. Intriguingly, both resistant H103/cisD2 and H314 cells shared a highly similar EV protein profile including downregulation of the metal ion transporter, ATP1B3, in the EVs implicating altered drug delivery. ICP-MS analysis revealed that less cisplatin accumulated in the resistant cells, but higher levels were detected in their EVs. Therefore, we inhibited EV secretion from the cells using a proton pump inhibitor and observed an increased drug sensitivity in cisplatin-resistant H314 cells. This finding suggests that control of EV secretion could be a potential strategy to enhance the efficacy of cancer treatment.

Matched MeSH terms: Metals
Neutron activation analysis and assessment of trace elements in fingernail from residents of Tokyo, Japan

Wee B, Ebihara M

Sains Malaysiana, 2017;46:605-613.

We report herewith the study of fingernail clippings obtained from the residents of Tokyo, Japan. A total of 18 participants with no health problems and occupational exposure to metals were recruited to provide fingernails samples for this study. Through the use of instrumental neutron activation analysis (INAA), 18 elements (Ag, Al, As, Ca, Cl, Co, Cu, Fe, Hg, K, Mg, Mn, Na, S, Sb, Se, V, and Zn) were determined. The results showed that the toxic elements in the fingernails are in the lower range when compared to literature values. There were no chronic exposures to toxic elements such as As and Hg found. The level of Hg found is lower than that reported 20 years ago, possibly due to the strict regulation control in Japan on the release of Hg to the environment. The elements Se and Zn are found to be rather uniformly distributed among participants and are in agreement with results from other countries. There were no significant differences in elemental concentrations due to genders and smoking habits. The overall data from this study showed similar concentrations to those of healthy participants from other countries. Thus, the current data could represent the background level of elemental concentrations in fingernails of residents in Tokyo, which could serve as reference values for future study.

Matched MeSH terms: Metals
Control of microbiologically influenced corrosion using ultraviolet radiation

Akrima Abu Bakar, Muhammad Khairool Fahmy Mohd Ali, Norhazilan Md. Noor, Nordin Yahaya, Mardhiah Ismail, Ahmad Safuan A. Rashid

Sains Malaysiana, 2017;46:1323-1331.

Baram Delta Operation had been producing oil and gas since 1960's and serious pipelines failure was reported in the year of 2005. The final investigation has concluded that one of the species of bacteria that has been identified to cause microbiologically influenced corrosion, specifically known as sulfate reducing bacteria (SRB) was found to be one of the potential contributing factors to the incidents. This work investigates the potential use of ultraviolet (UV) radiation to inhibit the SRB consortium that was cultivated from the crude oil in one of the main trunk lines at Baram Delta Operation, Sarawak, Malaysia. The impact of UV exposure to bio-corrosion conditions on carbon steel coupon in certain samples for 28 days was discussed in this study. The samples were exposed to UV radiation based on variations of parameters, namely: time of UV exposure; and power of UV lamp. The significant changes on the amount of turbidity reading and metal loss of the steel coupon were recorded before and after experiment. The results showed that SRB growth has reduced rapidly for almost 90% after the UV exposure for both parameters as compared to the abiotic samples. Metal loss values were also decreased in certain exposure condition. Additionally, field emission scanning electron microscopy (FESEM) coupled with energy dispersive spectroscopy (EDS) was performed to observe the biofilm layer formed on the metal surface after its exposure to SRB. The evidence suggested that the efficiency of UV treatment against SRB growth could be influenced by the particular factors studied

Matched MeSH terms: Metals
In vivo study on the release of nickel, chromium, and zinc in saliva and serum from patients treated with fixed orthodontic appliances

Quadras DD, Nayak USK, Kumari NS, Priyadarshini HR, Gowda S, Fernandes B

Dent Res J (Isfahan), 2019 7 16;16(4):209-215.
PMID: 31303873

Background: Fixed orthodontic appliances can release metal ions such as nickel, chromium, and zinc into saliva and blood, which can cause contact dermatitis, hypersensitivity, and cytotoxicity. This study was undertaken to assess the release of nickel, chromium, and zinc in saliva and serum of patients undergoing fixed orthodontic treatment.
Materials and Methods: This in vivo study was conducted on 80 participants with an age range of 15-40 years. Thirty were included as controls and 50 participants were treated with fixed orthodontic appliances. Saliva and blood samples were collected at five different periods, before insertion of fixed orthodontic appliance and at 1 week, 3 months, 1 year, and 1.5 years after insertion of appliance, respectively. The metal ion content in the samples were analyzed by atomic absorption spectrophotometry. Mean levels of nickel, chromium, and zinc in saliva and serum were compared between groups using independent sample t-test and before and after results using paired t-test. P < 0.05 was considered as statistically significant.
Results: At the end of 1.5 years, the mean salivary levels of nickel, chromium, and zinc in controls were 5.02 ppb, 1.27 ppb, and 10.24 ppb, respectively, as compared to 67 ppb, 30.8 ppb, and 164.7 ppb at the end of 1.5 years. This was statistically significant with P < 0.001. A significant increase in the metal ion levels were seen in participants with before and after insertion of appliance (P < 0.001).
Conclusion: Orthodontic appliances do release considerable amounts of metal ions such as nickel, chromium, and zinc in saliva and serum. However, it was within permissible levels and did not reach toxic levels.

Matched MeSH terms: Metals
Fulltext Draft genome of Paraburkholderia fungorum sequence type 868 recovered from human synovial tissues

Loong SK, Tan KK, Zulkifle NI, AbuBakar S

Data Brief, 2019 Aug;25:104159.
PMID: 31312701 DOI: 10.1016/j.dib.2019.104159

Paraburkholderia fungorum is an opportunistic bacteria infrequently associated with human infections. Here, we report the draft genome sequence of P. fungorum strain BF370, recovered from the synovial tissue of a patient in Malaysia. The P. fungorum genome contains a 8,950,957 bp chromosome with a G+C content of 61.8%. Colicin and heavy metal resistant genes were also present in the genome. Conserved sequence indels unique to P. fungorum were observed in the genome. The draft genome was deposited at the European Nucleotide Archive under the sample accession number ERS1776561 and study accession number PRJEB17921.

Matched MeSH terms: Metals, Heavy
Review of chitosan composite as a heavy metal adsorbent: Material preparation and properties

Begum S, Yuhana NY, Md Saleh N, Kamarudin NHN, Sulong AB

Carbohydr Polym, 2021 May 01;259:117613.
PMID: 33673980 DOI: 10.1016/j.carbpol.2021.117613

A large amount of wastewater is typically discharged into water bodies and has extremely harmful effects to aquatic environments. The removal of heavy metals from water bodies is necessary for the safe consumption of water and human activities. The demand for seafood has considerably increased, and millions of tons of crustacean waste are discarded every year. These waste products are rich in a natural biopolymer known as chitin. The deacetylated form of chitin, chitosan, has attracted attention as an adsorbent. It is a biocompatible and biodegradable polymer that can be modified and converted to various derivatives. This review paper focuses on relevant literature on strategies for chemically modifying the biopolymer and its use in the removal of heavy metals from water and wastewater. The different aspects of chitosan-based derivatives and their preparation and application are elucidated. A list of chitosan-based composites, along with their adsorptivity and experimental conditions, are compiled.

Matched MeSH terms: Metals, Heavy
Comprehensive genomic and phenotypic metal resistance profile of Pseudomonas putida strain S13.1.2 isolated from a vineyard soil

Chong TM, Yin WF, Chen JW, Mondy S, Grandclément C, Faure D, et al.

AMB Express, 2016 Dec;6(1):95.
PMID: 27730570

Trace metals are required in many cellular processes in bacteria but also induce toxic effects to cells when present in excess. As such, various forms of adaptive responses towards extracellular trace metal ions are essential for the survival and fitness of bacteria in their environment. A soil Pseudomonas putida, strain S13.1.2 has been isolated from French vineyard soil samples, and shown to confer resistance to copper ions. Further investigation revealed a high capacity to tolerate elevated concentrations of various heavy metals including nickel, cobalt, cadmium, zinc and arsenic. The complete genome analysis was conducted using single-molecule real-time (SMRT) sequencing and the genome consisted in a single chromosome at the size of 6.6 Mb. Presence of operons and gene clusters such as cop, cus, czc, nik, and asc systems were detected and accounted for the observed resistance phenotypes. The unique features in terms of specificity and arrangements of some genetic determinants were also highlighted in the study. Our findings has provided insights into the adaptation of this strain to accumulation and persistence of copper and other heavy metals in vineyard soil environment.

Matched MeSH terms: Metals, Heavy
Characterization of the depolymerizing activity of commercial lipases and detection of lipase-like activities in animal organ extracts using poly(3-hydroxybutyrate-co-4-hydroxybutyrate) thin film

Mok PS, Ch'ng DH, Ong SP, Numata K, Sudesh K

AMB Express, 2016 Dec;6(1):97.
PMID: 27730572

Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] is one of the polyhydroxyalkanoate (PHA) copolymers which can be degraded by lipases. In this study, the depolymerizing activity of different known commercial lipases was investigated via microassay using P(3HB-co-92 mol % 4HB) thin film as substrate. Non-enzymatic hydrolysis occurred under conditions in which buffers with pH 12 and 13 were added or temperature of 50 °C and above. Different concentrations of metal ions or detergents alone did not cause the film hydrolysis. The depolymerizing activity of lipases on P(3HB-co-4HB) was optimum in the pH range of 6-8 and at temperatures between 30 and 50 °C. Addition of metal ions and detergents in different concentrations was also shown to cause variable effects on the depolymerizing activity of commercial lipases. Pancreatic extracts from both mouse and chicken showed similar depolymerizing activity as the commercial lipases on the P(3HB-co-4HB) film. The presence of lipolytic enzymes in the organ extracts was confirmed with another lipase activity assay, p-nitrophenyl laurate assay. For the first time this has produced a direct evidence for the involvement of lipase-like enzymes from animal in the degradation of this PHA. Lipase is most likely the enzyme from pancreas that was involved in the degradation.

Matched MeSH terms: Metals
Fulltext Fractionation of as, co, cu and zn by sequential extraction in surface sediment of Kuala Terengganu river estuary

Muhammad Nazirul Mubin Abd Halim Shah, Lee, Siang Hing, Mohd Yusoff Nurulnadia, Meng, Chuan Ong

Malaysian Journal of Applied Sciences, 2020;5(2):57-68.
MyJurnal

Development and urbanization processes around Terengganu River estuary are expected to release a significant amount of heavy metals into the existing surface sediment. However, information on how and why these metals are attached into specific fraction of sediments is still lacking. Therefore, this study aimed to explain the heavy metal concentration distribution in each available fraction in Terengganu River estuary. In this study, nine surface sediments originated from various human activities area in Terengganu River estuary were collected during four different sampling sessions in 2017. Heavy metal content from the collected sediments were extracted using 3-steps BCR sequential extraction method followed by detection using Inductively Coupled Plasma Mass-Spectrometer (ICP-MS) and we discovered that the total concentration of arsenic (As), cobalt (Co), copper (Cu), and zinc (Zn) ranged from 2.18 to 17.48 mg/kg dry wt., 2.53 to 20.53 mg/kg dry wt., 1.01 to 13.13 mg/kg dry wt., and 6.10 to 65.71 mg/kg dry wt., respectively. Dominance of metals in each fraction can be arranged as follows: As: residual > reducible > exchangeable > oxidizable; Co: residual > exchangeable > reducible > oxidizable; Cu: residual > oxidizable > reducible > exchangeable; Zn: residual > exchangeable > reducible > oxidizable. Availability of metals in the sediment at Terengganu River estuary is limited since that majority of metals resides in non-mobilisable fraction of the sediment. In essence, the sequential extraction provides information regarding the metals’ fractionation, availability and mobility, which could be used in assessing the environmental contamination in the area.

Matched MeSH terms: Metals, Heavy

Filters

Please provide feedback to Administrator ([email protected])

External Links