Displaying publications 41 - 60 of 60 in total

Abstract:
Sort:
  1. Wijaya MI, Mohamad AR, Hafizurrachman M
    Int J Health Care Qual Assur, 2020 Jan 15;ahead-of-print(ahead-of-print).
    PMID: 32012498 DOI: 10.1108/IJHCQA-04-2019-0080
    PURPOSE: The purpose of this paper is to assess the association between shift schedule realignment and patient safety culture.

    DESIGN/METHODOLOGY/APPROACH: Using difference in differences model, BIMC Hospitals and Siloam Hospital Bali were compared before and after shift schedule realignment to test the association between shift schedule realignment and patient safety culture.

    FINDINGS: Shift schedule realignment was associated with a significant improvement in staffing (coefficient 1.272; 95% CI 0.842 - 1.702; p<0.001), teamwork within units (coefficient 1.689; 95% CI 1.206 - 2.171; p<0.001), teamwork across units (coefficient 1.862; 95% CI 1.415 - 2.308; p<0.001), handoffs and transitions (coefficient 0.999; 95% CI 0.616 - 1.382; p<0.001), frequency of error reported (coefficient 1.037; 95% CI 0.581 - 1.493; p<0.001), feedback and communication about error (coefficient 1.412; 95% CI 0.982 - 1.841; p<0.001) and communication openness (coefficient 1.393; 95% CI 0.968 - 1.818; p<0.001).

    PRACTICAL IMPLICATIONS: With positive impact on patient safety culture, shift schedule realignment should be considered as quality improvement initiative. It stretches the compressed workload suffered by staff while maintaining 40 h per week in accordance with applicable laws and regulations.

    ORIGINALITY/VALUE: Shift schedule realignment, designed to improve patient safety culture, has never been implemented in any Indonesian private hospital. Other hospital managers might also appreciate knowing about the shift schedule realignment to improve the patient safety culture.

    Matched MeSH terms: Safety Management/standards*
  2. Choy YC
    Med J Malaysia, 2006 Dec;61(5):577-85.
    PMID: 17623959
    Critical incident monitoring in anaesthesia is an important tool for quality improvement and maintenance of high safety standards in anaesthetic services. It is now widely accepted as a useful quality improvement technique for reducing morbidity and mortality in anaesthesia and has become part of the many quality assurance programmes of many general hospitals under the Ministry of Health. Despite wide-spread reservations about its value, critical incident monitoring is a classical qualitative research technique which is particularly useful where problems are complex, contextual and influenced by the interaction of physical, psychological and social factors. Thus, it is well suited to be used in probing the complex factors behind human error and system failure. Human error has significant contributions to morbidities and mortalities in anaesthesia. Understanding the relationships between, errors, incidents and accidents is important for prevention and risk management to reduce harm to patients. Cardiac arrests in the operating theatre (OT) and prolonged stay in recovery, constituted the bulk of reported incidents. Cardiac arrests in OT resulted in significant mortality and involved mostly de-compensated patients and those with unstable cardiovascular functions, presenting for emergency operations. Prolonged-stay in the recovery extended period of observation for ill patients. Prolonged stay in recovery was justifiable in some cases, as these patients needed a longer period of post-operative observation until they were stable enough to return to the ward. The advantages of the relatively low cost, and the ability to provide a comprehensive body of detailed qualitative information, which can be used to develop strategies to prevent and manage existing problems and to plan further initiatives for patient safety makes critical incident monitoring a valuable tool in ensuring patient safety. The contribution of critical incident reporting to the issue of patient safety is far from clear and very difficult to study. Efforts to do so have tended to rely on incident reporting, the only practical approach when funding is limited. The heterogeneity of critically ill patients as a group means that huge study populations would be required if other research techniques were to be used. In the era of evidence-based medicine, anaesthetists are looking for alternative evidence-based solutions to problems that we have accepted traditionally when we cannot quantify for good practical reasons. In the quest for patient safety, investment should be made in reliable audit, detection and reporting systems. The growing recognition that human error usually result from a failure of a system rather than an individual should be fostered to allow more lessons to be learnt, an approach that has been successful in other, safety-critical industries. New technology has a great deal to offer and investment is warranted in novel fail-safe drug administration systems. Last but not the least the importance of simple and sensible changes and better education should be remembered.
    Matched MeSH terms: Safety Management/methods*
  3. Ali R, Shaharudin R, Omar A, Yusoff F
    Int J Occup Environ Health, 2012 Oct-Dec;18(4):299-306.
    PMID: 23433290 DOI: 10.1179/1077352512Z.00000000031
    INTRODUCTION: This study on workplace injuries and risk reduction practices was part of the Malaysia National Health Morbidity Survey III (NHMS III) conducted in 2006.
    METHODS: This cross-sectional population-based survey was conducted to determine the incidence of workplaces injuries and assess the magnitude of some important risk reduction practices among workers. Data were gathered through face-to-face household interviews using a pre-coded questionnaire.
    RESULTS: Of the 22 880 eligible respondents, 88·2% (20 180) responded. The incidence rate for injuries at the workplace was 4·9 per 100 (95% CI: 4·6-5·2). The overall proportion of workers who had received occupational safety and health (OSH) training before or within 1 month of starting work was 33·6%. Among respondents who perceived that personal protective equipment (PPE) was required at their workplace, only 38·9% (95% CI: 37·8-39·4) were provided with it by their employers.
    DISCUSSION: Further studies are urgently needed to identify reasons for and management of the low uptake of risk reduction practices. This issue needs to be addressed to ensure the safety and health of our working population.
    Study name: National Health and Morbidity Survey (NHMS-2006)
    Matched MeSH terms: Safety Management/methods; Safety Management/organization & administration*
  4. Daud R, Ismail M, Omar Z
    Ind Health, 2010;48(6):824-34.
    PMID: 20616464
    Competencies of occupational safety and health (OSH) professionals have become a concern due to the significance of safety management in the field of safety engineering. The purpose of this article is to identify competencies needed by OSH professionals. These competencies are required by professionals in administrating and enforcing legislations related to OSH in Malaysia. This study used Delphi technique in three rounds of data collection. The benefits of this research approach are the use of experts in gaining opinions without time and geographical restraints. The results show 25 generic competencies with combinations of cognitive, interpersonal and intrapersonal competencies and 33 functional or specific competencies including knowledge and skills needed by OSH professionals. Both generic and functional competencies are also divided into threshold and differentiating competencies that would be used to differentiate average and excellent performance of OSH professionals.
    Matched MeSH terms: Safety Management/standards*; Safety Management/statistics & numerical data
  5. Shi H, Mohamed Zainal SR
    Int J Occup Saf Ergon, 2021 Mar 11.
    PMID: 33704011 DOI: 10.1080/10803548.2021.1902672
    Petroleum Industry belongs to the high-risk industry and operates under the social technical system. Therefore, safety behavior of employees need to be paid high attention. Thus, six dimensions of safety management practices are identified as independent variables to predict a special component of common safety behavior-mindful safety practices in Chinese Petroleum Industry. HRO (High Reliability Organization) theory is adopted as the underpinning theory. 255 first line workers from a Chinese petroleum company participated in this survey. The results reveal that safety training and safety communication and feedbacks are positively related to safety motivation. Moreover, workers' involvement and safety promotion policy have direct and positive impacts on mindful safety practices. Further, safety motivation is found to play a mediating role in the prediction of mindful safety practices in Chinese Petroleum Industry. These findings give new insights for petroleum companies on how to promote mindful safety practices in the workplace.
    Matched MeSH terms: Safety Management
  6. Fauziningtyas R, Chan CM, Pin TM, Dhamanti I, Smith GD
    Int J Older People Nurs, 2023 Sep;18(5):e12553.
    PMID: 37334471 DOI: 10.1111/opn.12553
    INTRODUCTION: The development of resident safety culture in nursing homes (NH) represents a major challenge for governments and NH owners, with a requirement for suitable tools to assess safety culture. Indonesia currently lacks suitable safety cultures scales for NH.

    OBJECTIVES: To evaluate the psychometric properties of the translated Indonesian version of the Nursing Home Survey on Patient Safety Culture (NHSOPSC-INA).

    METHODS: This study was a cross-sectional survey conducted using NHSOPSC-INA. A total of 258 participants from 20 NH in Indonesia were engaged. Participants included NH managers, caregivers, administrative staff, nurses and support staff with at least junior high school education. The SPSS 23.0 was used for descriptive data analysis and internal consistency (Cronbach's alpha) estimation. The AMOS (version 22) was used to perform confirmatory factor analysis (CFA) on the questionnaire's dimensional structure.

    RESULTS: The NHSOPSC CFA test originally had 12 dimensions with 42 items and was modified to eight dimensions with 26 items in the Indonesian version. The deleted dimensions were 'Staffing' (4 items), 'Compliance with procedure' (3 items), 'Training and skills' (3 items), 'non-punitive response to mistakes' (4 items) and 'Organisational learning' (2 items). The subsequent analysis revealed an accepted model with 26 NHSOPSC-INA items (root mean square error of approximation = 0.091, comparative fit index = 0.815, Tucker-Lewis index = 0.793, CMIN = 798.488, df = 291, CMIN/Df = 2.74, GFI = 0.782, AGFI = 0.737, p 

    Matched MeSH terms: Safety Management
  7. Oni OZ, Olanrewaju A, Cheen KS
    Int J Occup Saf Ergon, 2024 Jun;30(2):366-377.
    PMID: 38243387 DOI: 10.1080/10803548.2024.2308376
    Objectives. Notwithstanding its economic importance, the construction industry is still facing challenges due to its high accident record. As a result, the goal of this study is to identify the key underlying causes of accidents in the Malaysian construction industry that construction stakeholders can focus on to reduce the menace of accidents in the industry. Methods. To achieve this goal, relevant literature was reviewed in order to identify the causes of accidents. The identified factors were used to develop the survey questionnaire for collecting primary data, and the collected data were analysed using exploratory factor analysis (EFA) and confirmatory factor analysis (CFA). Results. The results of the EFA and CFA establish and confirm 11 clusters for the causes of accidents on construction sites: management problems; inadequate training; inadequate supervision; mental health problems; bad attitudes; inadequate funding; inadequate experience; material and equipment handling; poor safety practices; inadequate orientation; and work environment. Conclusion. The study concludes that addressing all 11 factors will drastically reduce the incessant accident occurrences in the construction industry. The result of this study will help construction stakeholders know where to direct their energy in an effort to reduce construction accidents.
    Matched MeSH terms: Safety Management
  8. Rahim H, Dapari R, Che Dom N, Mohd Noor MI
    Sci Rep, 2024 Sep 05;14(1):20735.
    PMID: 39237550 DOI: 10.1038/s41598-024-71294-6
    Safety culture is a critical determinant of organisational performance, particularly in high-risk industries especially in oil and gas. Understanding stakeholder preferences is essential for developing effective strategies that enhance safety culture. This study utilised the Analytic Hierarchy Process (AHP) to prioritise stakeholder preferences, identifying key elements of safety culture in Malaysia's oil and gas sector. This study employed a structured methodology to evaluate safety culture within the oil and gas industry, focusing on 18 sub-elements across three key domains: psychological, behavioural, and situational factors. A diverse sample of industry experts was recruited using purposeful and snowball sampling to ensure a comprehensive representation of stakeholder views. The AHP framework was applied to analyse the data, utilizing structured questionnaires and multicriteria decision-making techniques to prioritize the identified safety culture elements. The AHP analysis identified distinct priorities among different professional groups within the oil and gas sector. Safety and Health Practitioners emphasized practical elements such as safety rules and management commitment, while academicians prioritized knowledge and training. Management personnel highlighted the importance of safety ownership and communication, whereas policymakers focused on broader, policy-oriented aspects. The findings suggest that safety culture improvement initiatives should be tailored to address the specific needs and priorities of each professional group. A nuanced understanding of stakeholder preferences is crucial for developing comprehensive strategies that integrate observable behaviours, situational conditions, and psychological factors, ultimately fostering a robust safety culture in the oil and gas industry.
    Matched MeSH terms: Safety Management
  9. Halim I, Omar AR
    Int J Occup Saf Ergon, 2012;18(1):85-96.
    PMID: 22429532
    Many occupations in industry such as metal stamping workers, electronics parts assembly operators, automotive industry welders, and lathe operators require working in a standing posture for a long time. Prolonged standing can contribute to discomfort and muscle fatigue particularly in the back and legs. This study developed the prolonged standing strain index (PSSI) to quantify the risk levels caused by standing jobs, and proposed recommendations to minimize the risk levels. Risk factors associated with standing jobs, such as working posture, muscles activity, standing duration, holding time, whole-body vibration, and indoor air quality, were the basis for developing the PSSI. All risk factors were assigned multipliers, and the PSSI was the product of those multipliers. Recommendations for improvement are based on the PSSI; however, extensive studies are required to validate their effectiveness. multipliers, and the PSSI was the product of those multipliers. Recommendations for improvement are based on the PSSI; however, extensive studies are required to validate their effectiveness.
    Matched MeSH terms: Safety Management/methods*
  10. de la Rosette J, Laguna P, Álvarez-Maestro M, Eto M, Mochtar CA, Albayrak S, et al.
    Int J Urol, 2020 11;27(11):981-989.
    PMID: 32772434 DOI: 10.1111/iju.14340
    OBJECTIVES: To determine the well-being of urologists worldwide during the coronavirus disease 2019 pandemic, and whether they have adequate personal protective equipment knowledge and supplies appropriate to their clinical setting.

    METHODS: Urologists worldwide completed a Société Internationale d'Urologie online survey from 16 April 2020 until 1 May 2020. Analysis was carried out to evaluate their knowledge about protecting themselves and others in the workplace, including their confidence in their ability to remain safe at work, and any regional differences.

    RESULTS: There were 3488 respondents from 109 countries. Urologists who stated they were moderately comfortable that their work environment offers good protection against coronavirus disease 2019 showed a total mean satisfaction level of 5.99 (on a "0 = not at all" to "10 = very" scale). A large majority (86.33%) were confident about protecting themselves from coronavirus disease 2019 at work. However, only about one-third reported their institution provided the required personal protective equipment (35.78%), and nearly half indicated their hospital has or had limited personal protective equipment availability (48.08%). Worldwide, a large majority of respondents answered affirmatively for testing the healthcare team (83.09%). Approximately half of the respondents (52.85%) across all regions indicated that all surgical team members face an equal risk of contracting coronavirus disease 2019 (52.85%). Nearly one-third of respondents reported that they had experienced social avoidance (28.97%).

    CONCLUSIONS: Our results show that urologists lack up-to-date knowledge of preferred protocols for personal protective equipment selection and use, social distancing, and coronavirus disease 2019 testing. These data can provide insights into functional domains from which other specialties could also benefit.

    Matched MeSH terms: Safety Management/organization & administration*
  11. Lee YH, Quek ST, Khong PL, Lee CS, Wu JS, Zhang L, et al.
    Br J Radiol, 2020 Sep;93(1113):20200082.
    PMID: 32584595 DOI: 10.1259/bjr.20200082
    OBJECTIVE: To understand the status of pre-procedural safety practices in radiological examinations at radiology residency training institutions in various Asian regions.

    METHODS: A questionnaire based on the Joint Commission International Accreditation Standards was electronically sent to 3 institutions each in 10 geographical regions across 9 Asian countries. Questions addressing 45 practices were divided into 3 categories. A five-tier scale with numerical scores was used to evaluate safety practices in each institution. Responses obtained from three institutions in the United States were used to validate the execution rate of each surveyed safety practice.

    RESULTS: The institutional response rate was 70.0% (7 Asian regions, 21 institutions). 44 practices (all those surveyed except for the application of wrist tags for identifying patients with fall risks) were validated using the US participants. Overall, the Asian participants reached a consensus on 89% of the safety practices. Comparatively, most Asian participants did not routinely perform three pre-procedural practices in the examination appropriateness topic.

    CONCLUSION: Based on the responses from 21 participating Asian institutions, most routinely perform standard practices during radiological examinations except when it comes to examination appropriateness. This study can provide direction for safety policymakers scrutinizing and improving regional standards of care.

    ADVANCES IN KNOWLEDGE: This is the first multicenter survey study to elucidate pre-procedural safety practices in radiological examinations in seven Asian regions.

    Matched MeSH terms: Safety Management/standards
  12. Amir Sultan MM, Goh CT, Wan Puteh SE, Mokhtar M
    Int J Health Care Qual Assur, 2019 Feb 11;32(1):34-44.
    PMID: 30859864 DOI: 10.1108/IJHCQA-08-2017-0161
    PURPOSE: Mercury is widely used in medical and healthcare facilities as dental amalgam, mercury-added medical devices, thiomersal-containing vaccines, laboratory analysis and for other general applications despite the hazards. Various agencies consistently promote mercury-free medical facilities through mercury-free alternatives and better management practices, which are in line with the Minamata Convention on Mercury that aims to protect human health and environment from anthropogenic mercury release. The paper aims to discuss these issues.

    DESIGN/METHODOLOGY/APPROACH: The authors conducted a gap analysis on recommended practices gathered from the literature and current practices gathered through semi-structured interviews with Malaysian medical personnel. A life cycle approach was adopted covering mercury use: input, storage, handling, accident, waste disposal and governance phases.

    FINDINGS: The authors found that there are significant gaps between recommended and current mercury management practices. Analysis indicates improper mercury management as the main contributor to these gaps. The authors found from recommended practices that core components needing improvement include: mercury management action plan, mercury use identification team, purchasing policy, proper guidelines and monitoring systems.

    PRACTICAL IMPLICATIONS: This study helps us to understand mercury management practices and suggests essential steps to establish a mercury-free medical facility.

    ORIGINALITY/VALUE: This study explored the gaps between recommended and current mercury management practices in a medical facility and contributes to the Minamata Convention on Mercury aspirations.

    Matched MeSH terms: Safety Management/organization & administration*
  13. Zerguine H, Tamrin SBM, Jalaludin J
    Ind Health, 2018 Jun 01;56(3):264-273.
    PMID: 29398685 DOI: 10.2486/indhealth.2017-0205
    Malaysian construction sector is regarded as critical in the field of health because of the high rates of accidents and fatalities. This research aimed to determine the prevalence, sources and severity of injuries and its association with commitment to safety among foreign construction workers. A cross-sectional study was conducted among 323 foreign construction workers from six construction projects of a large organization in Malaysia, using a simple random sampling method. Data was collected using a structured questionnaire to assess work-related injuries and safety commitment. The collected data was analysed by SPSS 22.0 using descriptive statistics and χ2 test. The prevalence of work-related injuries in a one year period was 22.6%, where most of the injuries were of moderate severity (39.7%) and falls from heights represented the main source (31.5%). The majority of the foreign construction workers had perceived between moderate and high safety commitment, which was significantly associated with work-related injuries. The results also showed a significant association of work-related injuries with the company's interest in Safety and Health, Safety and Health training, and safety equipment. Thus, the implementation of new procedures and providing relevant trainings and safety equipment; will lead to a decrease in injury rates in construction sites.
    Matched MeSH terms: Safety Management/statistics & numerical data
  14. Ta GC, Mokhtar MB, Mohd Mokhtar HA, Ismail AB, Abu Yazid MF
    Ind Health, 2010;48(6):835-44.
    PMID: 20616463
    Chemical classification and labelling systems may be roughly similar from one country to another but there are significant differences too. In order to harmonize various chemical classification systems and ultimately provide consistent chemical hazard communication tools worldwide, the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) was endorsed by the United Nations Economic and Social Council (ECOSOC). Several countries, including Japan, Taiwan, Korea and Malaysia, are now in the process of implementing GHS. It is essential to ascertain the comprehensibility of chemical hazard communication tools that are described in the GHS documents, namely the chemical labels and Safety Data Sheets (SDS). Comprehensibility Testing (CT) was carried out with a mixed group of industrial workers in Malaysia (n=150) and factors that influence the comprehensibility were analysed using one-way ANOVA. The ability of the respondents to retrieve information from the SDS was also tested in this study. The findings show that almost all the GHS pictograms meet the ISO comprehension criteria and it is concluded that the underlying core elements that enhance comprehension of GHS pictograms and which are also essential in developing competent persons in the use of SDS are training and education.
    Matched MeSH terms: Safety Management/methods*; Safety Management/statistics & numerical data
  15. Samsuri SE, Lua PL, Fahrni ML
    BMJ Open, 2015 Nov 26;5(11):e008889.
    PMID: 26610761 DOI: 10.1136/bmjopen-2015-008889
    OBJECTIVE: To assess the safety attitudes of pharmacists, provide a profile of their domains of safety attitude and correlate their attitudes with self-reported rates of medication errors.
    DESIGN: A cross-sectional study utilising the Safety Attitudes Questionnaire (SAQ).
    SETTING: 3 public hospitals and 27 health clinics.
    PARTICIPANTS: 117 pharmacists.
    MAIN OUTCOME MEASURES: Safety culture mean scores, variation in scores across working units and between hospitals versus health clinics, predictors of safety culture, and medication errors and their correlation.
    RESULTS: Response rate was 83.6% (117 valid questionnaires returned). Stress recognition (73.0±20.4) and working condition (54.8±17.4) received the highest and lowest mean scores, respectively. Pharmacists exhibited positive attitudes towards: stress recognition (58.1%), job satisfaction (46.2%), teamwork climate (38.5%), safety climate (33.3%), perception of management (29.9%) and working condition (15.4%). With the exception of stress recognition, those who worked in health clinics scored higher than those in hospitals (p<0.05) and higher scores (overall score as well as score for each domain except for stress recognition) correlated negatively with reported number of medication errors. Conversely, those working in hospital (versus health clinic) were 8.9 times more likely (p<0.01) to report a medication error (OR 8.9, CI 3.08 to 25.7). As stress recognition increased, the number of medication errors reported increased (p=0.023). Years of work experience (p=0.017) influenced the number of medication errors reported. For every additional year of work experience, pharmacists were 0.87 times less likely to report a medication error (OR 0.87, CI 0.78 to 0.98).
    CONCLUSIONS: A minority (20.5%) of the pharmacists working in hospitals and health clinics was in agreement with the overall SAQ questions and scales. Pharmacists in outpatient and ambulatory units and those in health clinics had better perceptions of safety culture. As perceptions improved, the number of medication errors reported decreased. Group-specific interventions that target specific domains are necessary to improve the safety culture.
    Study site: Klinik kesihatan, hospitals, Malaysia
    Matched MeSH terms: Safety Management/standards*
  16. Chong HY, Low TS
    Int J Occup Saf Ergon, 2014;20(3):503-13.
    PMID: 25189753
    Safety and health issues remain critical to the construction industry due to its working environment and the complexity of working practises. This research attempts to adopt 2 research approaches using statistical data and court cases to address and identify the causes and behavior underlying construction safety and health issues in Malaysia. Factual data on the period of 2000-2009 were retrieved to identify the causes and agents that contributed to health issues. Moreover, court cases were tabulated and analyzed to identify legal patterns of parties involved in construction site accidents. Approaches of this research produced consistent results and highlighted a significant reduction in the rate of accidents per construction project in Malaysia.
    Matched MeSH terms: Safety Management/organization & administration
  17. Anuar, I., Zahedi, F., Kadir, A., Mokhtar, A.B.
    MyJurnal
    Background : A safety culture practice through prevention needs skillful, knowledgeable and competencies workers. The effectiveness of occupational safety and health programme implementation needs the knowledge related to Occupational Safety and Health Acts, 1994 (OSHA 1994) and its regulations.
    Objective : This study was to determine the level of knowledge and awareness towards Occupational Safety and Health (OSH) aspects among workers in medical laboratory.
    Methodology : A cross-sectional study was carried out on 34 medical laboratories in which 17 were from private and another 17 laboratories were from public sectors. It consists of 112 medical laboratory disciplines. Data were obtained using self-administered questionnaire consisting of 33 questions related to Occupational Safety and Health (OSH). Each question was coded “know” and “do not know” and respondents were needed to state their understanding towards each OSH issue tendered.
    Results : Respondent’s level of knowledge was analyzed according to socio-demography and socioeconomic factors. OSH level of knowledge among medical laboratory workers showed that there are significant differences (p0.05) in OSH knowledge according to between sex, marital status, income and services sectors among workers in medical laboratories. Only about 60.5% of respondents knew the existence of OSHA 1994, whereas those who knew about OSHA 1994 regulations were below than 50.0% from overall respondents.
    Conclusion : Promotion and practices of dynamic safety culture through prevention needs high knowledge of OSH.
    Matched MeSH terms: Safety Management
  18. Alex Kim RJ, Chin ZH, Sharlyn P, Priscilla B, Josephine S
    Med J Malaysia, 2019 Oct;74(5):385-388.
    PMID: 31649213
    INTRODUCTION: Patient safety is defined as 'the prevention of harm caused by errors of commission and omission'. Patient safety culture is one of the important determining factor in safety and quality in healthcare. The purpose of this study is to assess the views and perceptions of health care professionals about patient safety culture in Sarawak General Hospital (SGH).

    METHODS: A cross-sectional study, using the 'Hospital Survey on Patient Safety Culture (HSOPSC)' questionnaire was carried out in 2018 in SGH. Random sampling was used to select a wide range of staff in SGH. A self-administered questionnaire was distributed to 500 hospital staff consisting of doctors, nurses, pharmacist and other clinical and non-clinical staff, conducted from March to April 2018. A total of 407 respondents successfully completed the questionnaire. Therefore, the final response rate for the survey was 81.4%. This study used SPSS 22.0 for Windows and Hospital Data Entry and Analysis Tool that works with Microsoft Excel developed by United States Agency for Healthcare Research and Quality (AHRQ) to perform statistical analysis on the survey data.

    RESULTS: Majority of the respondents graded the overall patient safety as acceptable (63.1%) while only 3.4% graded as excellent. The overall patient safety score was 50.1% and most of the scores related to dimensions were lower than the benchmark scores (64.8%). Generally, the mean positive response rate for all the dimensions were lower than composite data of AHRQ, except for "Organizational Learning - Continuous Improvement", which is also the highest positive response rate (80%), higher than AHRQ data (73%). The result showed that SGH has a good opportunity to improve over time as it gains experience and accumulates knowledge. On the other hand, the lowest percentage of positive responses was "Non-punitive response to error" (18%), meaning that most of the staff perceived that they will be punished for medical error.

    CONCLUSIONS: The level of patient safety culture in SGH is acceptable and most of the scores related to dimensions were lower than benchmark score. SGH as a learning organisation should also address the issues of staffing, improving handoff and transition and develop a non-punitive culture in response to error.

    Matched MeSH terms: Safety Management
  19. Aljadhey H, Alkhani S, Khan TM
    Saudi Pharm J, 2017 Nov;25(7):1011-1014.
    PMID: 29158708 DOI: 10.1016/j.jsps.2017.03.002
    Purpose: Few hospitals employ a medication safety officer. A medication safety officer preparatory course was planned using a structured curriculum to prepare pharmacists with the knowledge and skills to start medication safety officer activities. The current study aims to assess the outcome, as change in knowledge, of a hospital medication safety officer preparatory course.

    Methods: We conducted a three-day course in February 2011 in Riyadh, Saudi Arabia. It was developed to provide attendees with the essential knowledge and skills to become a medication safety officer. Teaching methodologies included didactic teaching, group discussions, case presentations, and an independent study of medication safety materials. The content of the course focused on the various roles of a medication safety officer, the importance of medication safety in a health care setting, the incidence of adverse drug events in a hospital setting, strategies to identify and prevent adverse events, the use of root cause analysis and failure mode and effect analysis, the role of an officer in hospital accreditation, and ways for promoting safety culture. Assessment of the course outcome was accomplished by comparing scores of knowledge level before and after the course. The knowledge level was assessed by a 20-item exam which was developed and validated by course instructors.

    Results: Twenty-one participants attended the course and completed both the baseline and after-course assessment questionnaires. The majority was male (N = 14, % = 66.7) with a job experience of 1-5 five years (N = 10, % = 47.6). The knowledge score increased from 14.3 ± 1.90 (mean ± standard deviation) at baseline to 18.5 ± 1.43 after successfully completing the course (P 

    Matched MeSH terms: Safety Management
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links