MyMedR

Displaying publications 41 - 60 of 102 in total

Abstract:

Sort:

Fulltext Food court hygiene assessment and food safety knowledge, attitudes and practices of food handlers in Putrajaya

Mohd. Firdaus Siau, A., Son, R., Mohhiddin, O., Toh, P.S., Chai, L.C

International Food Research Journal, 2015;22(5):1843-1854.
MyJurnal

This cross sectional study aimed to explored the pattern of socio-demographic distribution, to assess the level of KAP of food safety; and the relationship with the level of premise cleanliness in the food courts at Putrajaya. Distribution of food handlers socio-demographic profile was Malaysian (62.0%), male (70.4%), working experienced in food industry (82.0%) and attended food handler training (85.0%). The mean age was 28.7 years and 85.4% having income not less than RM 1,500 monthly. 78.5% of the food handlers at educational level were found as primary/secondary school. 15.0% of the respondents had not attended the food sanitation training. The findings reveal that food handlers’ KAP were high with a mean percentage score more than 79.0%.The majority of the food courts in Putrajaya had consistently moderate level of cleanliness (63.5%) with the mean of 83.03%. Only 27.4% of the food courts were in the level of clean situation (>89% of premise cleanliness score) and 9.1% were not in the clean condition (

Matched MeSH terms: Food Industry
Fulltext Bacteriophages and their applications

Thung, T.Y., Lee, E., Tan, C.W., Malcolm, T.T.H., New, C.Y., Ramzi, O.S.B., et al.

Food Research, 2018;2(5):404-414.
MyJurnal

Bacteriophages are ubiquitous in our world, mainly in the oceans, soil, the water and food
we consume. They can be used efficiently in modern biotechnology, as well as alternatives
to antibiotics for many antibiotic resistant bacterial strains. Phages can be used as vehicles
for vaccines both DNA and protein, for the detection of pathogenic bacterial strain, as biocontrol
agents in agriculture and food industry. This review outlines the properties as well
as the influence of different external physical and chemical factors like temperature and
acidity on phage persistence. A better understanding of the complex problem of phage
sensitivity to external factors may be useful for other researchers working with phages.
Furthermore, the applications of bacteriophages were described in this paper as well.

Matched MeSH terms: Food Industry
Fulltext The effectiveness of food handler training programmes in Malaysia and Ireland to prevent food-borne disease

Tirmizi, L.I.T., Brand, H., Son, R., New, C.Y.

Food Research, 2018;2(3):247-257.
MyJurnal

According to the World Health Organisation (WHO), globally 600 million people suffer
from food-borne diseases (FBD), and 420,000 people die as a result. The European Food
Safety Authority (EFSA) has stated that FBD are linked to the food industry, with the
most common means of transmission being due to poor food handling and hygiene by
food handlers working in the food industry. The aim of this research was to investigate the
effectiveness of mandatory food handler training programmes (FHTP) to prevent FBD in
Malaysia and Ireland. To do this, the FHTP existing in Malaysia and Ireland were
analysed, in addition to the legislation they fall under in each respective country.
Effectiveness was determined by investigating the level of food safety knowledge (FSK)
and food safety practices (FSP) of food handlers in Malaysia and Ireland. A systematic
literature review (SLR) and a narrative literature review (NLR) were conducted for this
research. The SLR was based on the PRISMA diagram, using the Confidence in the
Evidence from Reviews of Qualitative research (CERQual) approach to evaluate the
studies used for this research. A total of 8 Malaysian studies and 1 Irish study were used to
determine the level of FSK and FSP of food handlers in each respective country, to
examine the effectiveness of FHTP. The results of the studies used for this research have
depicted overall good FSP and FSK of food handlers in Malaysia and Ireland; yet trends
continue to show that food handlers are one of the biggest contributors to FBD,
demonstrating that FHTP are not effective in preventing FBD. The findings from this
research highlights that although these trainings can be an effective tool to prevent FBD, if
they are not executed correctly, food handlers will continue to contribute to FBD.

Matched MeSH terms: Food Industry
Fulltext Effects of degree of hydrolysis on physicochemical properties of cobia (Rachycentron canadum) frame hydrolysate

Amiza, M.A., Kong, Y.L., Faazaz, A.L.

International Food Research Journal, 2012;19(1):199-206.
MyJurnal

The effect of degree of hydrolysis (DH) on the physicochemical properties of cobia frame hydrolysate was determined. Three levels of degree of hydrolysis of cobia frame hydrolysate were studied, which were 53%, 71% and 96%. After enzymatic hydrolysis using Alcalase®, the samples were spray-dried. Cobia hydrolysate powder samples were analyzed for their proximate analysis and physicochemical properties. The proximate analysis showed significant differences in fat and ash content only. DH96 hydrolysate showed desirable essential amino acid profile for human requirement except for methionine and isoleucine. The study found that cobia frame hydrolysate had good colour, emulsifying capacity and excellent foaming properties. However, there were no significant differences in water-holding capacity, oil-holding capacity and peptide solubility among the hydrolysate samples. This study suggested that cobia frame hydrolysate is a potential ingredient and foaming agent for food industry.

Matched MeSH terms: Food Industry
Fulltext Assessing biofilm formation by Listeria monocytogenes

Fouladynezhad, N., Afsah-Hejri, L., Rukayadi, Y., Abdulkarim, S.M., Son, R., Marian, M.N.

International Food Research Journal, 2013;20(2):987-990.
MyJurnal

Listeria monocytogenes (L. monocytogenes) is a serious food-borne pathogen for immunocompromised individuals. L. monocytogenes is capable of producing biofilm on the surface of food processing lines and instruments. The biofilm transfers contamination to food products and impose risk to public health. Transfers contamination to food products, and impose risk hazard to public health. The aim of this study was to investigate biofilm producing ability of L. monocytogenes isolates. Microtitre assay was used to measure the amount of biofilm production by ten L. monocytogenes isolates from minced chicken / meat, sausages and burgers. Results showed that all 10 L. monocytogenes isolates were able to form biofilm after 24 h at 20˚C on polystyrene surface (the common surface in food industries). Some strains were capable of forming biofilm more than the others. All strains showed a slight raise in the quantities of attached cells over 48 and 72 h. L. monocytogenes strains isolated from minced chicken, minced meat and burgers were better biofilm-producers comparing to the strains isolated from sausages.

Matched MeSH terms: Food Industry
Structural, rheological, and gelling characteristics of starch-based materials in context to 3D food printing applications in precision nutrition

Wu H, Sang S, Weng P, Pan D, Wu Z, Yang J, et al.

Compr Rev Food Sci Food Saf, 2023 Nov;22(6):4217-4241.
PMID: 37583298 DOI: 10.1111/1541-4337.13217

Starch-based materials have viscoelasticity, viscous film-forming, dough pseudoplasticity, and rheological properties, which possess the structural characteristics (crystal structure, double helix structure, and layered structure) suitable for three-dimensional (3D) food printing inks. 3D food printing technology has significant advantages in customizing personalized and precise nutrition, expanding the range of ingredients, designing unique food appearances, and simplifying the food supply chain. Precision nutrition aims to consider individual nutritional needs and individual differences, which include special food product design and personalized precise nutrition, thus expanding future food resources, then simplifying the food supply chain, and attracting extensive attention in food industry. Different types of starch-based materials with different structures and rheological properties meet different 3D food printing technology requirements. Starch-based materials suitable for 3D food printing technology can accurately deliver and release active substances or drugs. These active substances or drugs have certain regulatory effects on the gut microbiome and diabetes, so as to maintain personalized and accurate nutrition.

Matched MeSH terms: Food Industry
Fulltext Theory-Based Intervention Module on Occupational Safety and Health (TRIMOSH) in improving knowledge, attitude, and practice among food industry workers: Study protocol for a randomised controlled trial

Dapari R, Mahfot MH, Ahmad Zamzuri M'I, Md Isa Z, Hassan MR, Che Dom N, et al.

PLoS One, 2024;19(1):e0295771.
PMID: 38165964 DOI: 10.1371/journal.pone.0295771

INTRODUCTION: The significant contribution of the food and beverage industry to Malaysia's Gross Domestic Product is projected to increase in the upcoming years. With the industry's expansion, the demand for workers on food premises would also continuously increase. The food industry workers are exposed to risks arising from physical, chemical, biological, ergonomic, and psychosocial hazards while performing their duties. Thus, it is essential for these workers to be equipped with proper knowledge, attitude, and practices (KAP) in safety and health.
AIMS: This study aims to develop and evaluate the effectiveness of the safety and health programme TRIMOSH (Theory-Based Intervention Module on Occupational Safety and Health) in improving the knowledge, attitude, and practice among food industry workers.
METHODS: TRIMOSH intervention study is a two-arm randomised, single-blinded, controlled, parallel trial that will be conducted among food industry workers in Selangor, Malaysia. In a partnership with Food Handler Training Schools in Selangor, 10 pairs of Food Handler Training Schools with 12 participants per group (n = 240) will be recruited for balanced randomisation intervention and control conditions. Furthermore, data collection of all participants was conducted at four time points: baseline (T0), immediately (T1), one month (T2), and three months (T3) post-intervention. Generalised Linear Mixed Model (GLMM) will be conducted to determine the effects of intervention within and between study groups. Subsequently, the primary outcomes increase the knowledge, attitude, and practice (KAP) of safety and health at food premises. Clinical Trial Registry registration was approved by the ClinicalTrials.gov committee on October 2022 with the ClinicalTrials.gov Identifier: NCT05571995. This study has also been approved by the Ethics Committee for Research Involving Human Subjects of Universiti Putra Malaysia (JKEUPM-2022-346). All participants are required to provide consent prior to participation.
CONCLUSIONS: The characteristics of the respondents are expected to show no difference between the groups. It is hypothesised that TRIMOSH is effective in improving the knowledge, attitude, and practices of food industry workers in Selangor. The results will be reported and presented in international peer-reviewed journals, conferences, and other platforms. In addition, the TRIMOSH programme will be offered at the national level by the relevant authorities for the benefit of food industry workers.

Matched MeSH terms: Food Industry
Fulltext Intelligent color vision system for ripeness classification of oil palm fresh fruit bunch

Fadilah N, Mohamad-Saleh J, Abdul Halim Z, Ibrahim H, Syed Ali SS

Sensors (Basel), 2012;12(10):14179-95.
PMID: 23202043 DOI: 10.3390/s121014179

Ripeness classification of oil palm fresh fruit bunches (FFBs) during harvesting is important to ensure that they are harvested during optimum stage for maximum oil production. This paper presents the application of color vision for automated ripeness classification of oil palm FFB. Images of oil palm FFBs of type DxP Yangambi were collected and analyzed using digital image processing techniques. Then the color features were extracted from those images and used as the inputs for Artificial Neural Network (ANN) learning. The performance of the ANN for ripeness classification of oil palm FFB was investigated using two methods: training ANN with full features and training ANN with reduced features based on the Principal Component Analysis (PCA) data reduction technique. Results showed that compared with using full features in ANN, using the ANN trained with reduced features can improve the classification accuracy by 1.66% and is more effective in developing an automated ripeness classifier for oil palm FFB. The developed ripeness classifier can act as a sensor in determining the correct oil palm FFB ripeness category.

Matched MeSH terms: Food Industry/instrumentation
Forming a lutein nanodispersion via solvent displacement method: the effects of processing parameters and emulsifiers with different stabilizing mechanisms

Tan TB, Yussof NS, Abas F, Mirhosseini H, Nehdi IA, Tan CP

Food Chem, 2016 Mar 1;194:416-23.
PMID: 26471574 DOI: 10.1016/j.foodchem.2015.08.045

A solvent displacement method was used to prepare lutein nanodispersions. The effects of processing parameters (addition method, addition rate, stirring time and stirring speed) and emulsifiers with different stabilizing mechanisms (steric, electrostatic, electrosteric and combined electrostatic-steric) on the particle size and particle size distribution (PSD) of the nanodispersions were investigated. Among the processing parameters, only the addition method and stirring time had significant effects (p<0.05) on the particle size and PSD. For steric emulsifiers, Tween 20, 40, 60 and 80 were used to produce nanodispersions successfully with particle sizes below 100nm. Tween 80 (steric) was then chosen for further comparison against sodium dodecyl sulfate (SDS) (electrostatic), sodium caseinate (electrosteric) and SDS-Tween 80 (combined electrostatic-steric) emulsifiers. At the lowest emulsifier concentration of 0.1%, all the emulsifiers invariably produced stable nanodispersions with small particle sizes (72.88-142.85nm) and narrow PSDs (polydispersity index<0.40).

Matched MeSH terms: Food Industry/methods
Modeling BOD and COD removal from Palm Oil Mill Secondary Effluent in floating wetland by Chrysopogon zizanioides (L.) using response surface methodology

Darajeh N, Idris A, Fard Masoumi HR, Nourani A, Truong P, Sairi NA

J Environ Manage, 2016 Oct 01;181:343-352.
PMID: 27393941 DOI: 10.1016/j.jenvman.2016.06.060

While the oil palm industry has been recognized for its contribution towards economic growth and rapid development, it has also contributed to environmental pollution due to the production of huge quantities of by-products from the oil extraction process. A phytoremediation technique (floating Vetiver system) was used to treat Palm Oil Mill Secondary Effluent (POMSE). A batch study using 40 L treatment tanks was carried out under different conditions and Response Surface Methodology (RSM) was applied to optimize the treatment process. A three factor central composite design (CCD) was used to predict the experimental variables (POMSE concentration, Vetiver plant density and time). An extraordinary decrease in organic matter as measured by BOD and COD (96% and 94% respectively) was recorded during the experimental duration of 4 weeks using a density of 30 Vetiver plants. The best and lowest final BOD of 2 mg/L was obtained when using 15 Vetiver plants after 13 days for low concentration POMSE (initial BOD = 50 mg/L). The next best result of BOD at 32 mg/L was obtained when using 30 Vetiver plants after 24 days for medium concentration POMSE (initial BOD = 175 mg/L). These results confirmed the validity of the model, and the experimental value was determined to be quite close to the predicted value, implying that the empirical model derived from RSM experimental design can be used to adequately describe the relationship between the independent variables and response. The study showed that the Vetiver system is an effective method of treating POMSE.

Matched MeSH terms: Food Industry*
Fulltext The microbial composition of dried fish prepared according to Greenlandic Inuit traditions and industrial counterparts

Hauptmann AL, Paulová P, Castro-Mejía JL, Hansen LH, Sicheritz-Pontén T, Mulvad G, et al.

Food Microbiol, 2020 Feb;85:103305.
PMID: 31500717 DOI: 10.1016/j.fm.2019.103305

The practices of preparing traditional foods in the Arctic are rapidly disappearing. Traditional foods of the Arctic represent a rarity among food studies in that they are meat-sourced and prepared in non-industrial settings. These foods, generally consumed without any heating step prior to consumption, harbor an insofar undescribed microbiome. The food-associated microbiomes have implications not only with respect to disease risk, but might also positively influence host health by transferring a yet unknown diversity of live microbes to the human gastrointestinal tract. Here we report the first study of the microbial composition of traditionally dried fish prepared according to Greenlandic traditions and their industrial counterparts. We show that dried capelin prepared according to traditional methods have microbiomes clearly different from industrially prepared capelin, which also have more homogenous microbiomes than traditionally prepared capelin. Interestingly, the locally preferred type of traditionally dried capelin, described to be tastier than other traditionally dried capelin, contains bacteria that potentially confer distinct taste. Finally, we show that dried cod have comparably more homogenous microbiomes when compared to capelin and that in general, the environment of drying is a major determinant of the microbial composition of these indigenous food products.

Matched MeSH terms: Food Industry/methods*
Respiratory health of rice millers in Kelantan, Malaysia

Musa R, Naing L, Ahmad Z, Kamarul Y

Southeast Asian J Trop Med Public Health, 2000 Sep;31(3):575-8.
PMID: 11289024

A cross sectional study was carried out to evaluate the effect of rice husk dust in rice millers in Malaysia. Altogether 69 workers participated in this study. They were interviewed using standardized questionnaires and lung function tests were performed. Chest tightness was among the common symptoms (34.9%) complained by workers. Age, duration of employment and smoking status were among the factors associated with respiratory symptoms (p < 0.01). Lung function tests revealed some degree of impairment compared to the healthy population.

Matched MeSH terms: Food Industry*
Fulltext Harmonisation of food labelling regulations in Southeast Asia: benefits, challenges and implications

Kasapila W, Shaarani SM

Asia Pac J Clin Nutr, 2011;20(1):1-8.
PMID: 21393103

In the globalised world of the 21st century, issues of food and nutrition labelling are of pre-eminent importance. Several international bodies, including the World Health Organisation and World Trade Organisation, are encouraging countries to harmonise their food and nutrition regulations with international standards, guidelines and recommendations such as those for Codex Alimentarius. Through harmonisation, these organisations envisage fewer barriers to trade and freer movement of food products between countries, which would open doors to new markets and opportunities for the food industry. In turn, increased food trade would enhance economic development and allow consumers a greater choice of products. Inevitably, however, embracing harmonisation brings along cost implications and challenges that have to be overcome. Moreover, the harmonisation process is complex and sporadic in light of the tasks that countries have to undertake; for example, updating legislation, strengthening administrative capabilities and establishing analytical laboratories. This review discusses the legislation and regulations that govern food and nutrition labelling in Southeast Asia, and highlights the discrepancies that exist in this regard, their origin and consequences. It also gives an account of the current status of harmonising labelling of pre-packaged foodstuffs in the region and explains the subsequent benefits, challenges and implications for governments, the food industry and consumers.

Matched MeSH terms: Food Industry/economics
Fulltext Banana by-products: an under-utilized renewable food biomass with great potential

Padam BS, Tin HS, Chye FY, Abdullah MI

J Food Sci Technol, 2014 Dec;51(12):3527-45.
PMID: 25477622 DOI: 10.1007/s13197-012-0861-2

Banana (Musaceae) is one of the world's most important fruit crops that is widely cultivated in tropical countries for its valuable applications in food industry. Its enormous by-products are an excellent source of highly valuable raw materials for other industries by recycling agricultural waste. This prevents an ultimate loss of huge amount of untapped biomass and environmental issues. This review discusses extensively the breakthrough in the utilization of banana by-products such as peels, leaves, pseudostem, stalk and inflorescence in various food and non-food applications serving as thickening agent, coloring and flavor, alternative source for macro and micronutrients, nutraceuticals, livestock feed, natural fibers, and sources of natural bioactive compounds and bio-fertilizers. Future prospects and challenges are the important key factors discussed in association to the sustainability and feasibility of utilizing these by-products. It is important that all available by-products be turned into highly commercial outputs in order to sustain this renewable resource and provide additional income to small scale farming industries without compromising its quality and safety in competing with other commercial products.

Matched MeSH terms: Food Industry
Fulltext Analytical modeling of glucose biosensors based on carbon nanotubes

Pourasl AH, Ahmadi MT, Rahmani M, Chin HC, Lim CS, Ismail R, et al.

Nanoscale Res Lett, 2014 Jan 15;9(1):33.
PMID: 24428818 DOI: 10.1186/1556-276X-9-33

In recent years, carbon nanotubes have received widespread attention as promising carbon-based nanoelectronic devices. Due to their exceptional physical, chemical, and electrical properties, namely a high surface-to-volume ratio, their enhanced electron transfer properties, and their high thermal conductivity, carbon nanotubes can be used effectively as electrochemical sensors. The integration of carbon nanotubes with a functional group provides a good and solid support for the immobilization of enzymes. The determination of glucose levels using biosensors, particularly in the medical diagnostics and food industries, is gaining mass appeal. Glucose biosensors detect the glucose molecule by catalyzing glucose to gluconic acid and hydrogen peroxide in the presence of oxygen. This action provides high accuracy and a quick detection rate. In this paper, a single-wall carbon nanotube field-effect transistor biosensor for glucose detection is analytically modeled. In the proposed model, the glucose concentration is presented as a function of gate voltage. Subsequently, the proposed model is compared with existing experimental data. A good consensus between the model and the experimental data is reported. The simulated data demonstrate that the analytical model can be employed with an electrochemical glucose sensor to predict the behavior of the sensing mechanism in biosensors.

Matched MeSH terms: Food Industry
An Integrated Systems Approach is Needed to Ensure the Sustainability of Antibiotic Effectiveness for Both Humans and Animals

So AD, Shah TA, Roach S, Ling Chee Y, Nachman KE

J Law Med Ethics, 2015;43 Suppl 3:38-45.
PMID: 26243242 DOI: 10.1111/jlme.12273

The growing demand for animal products and the widespread use of antibiotics in bringing food animals to market have heightened concerns over cross-species transmission of drug resistance. Both the biology and emerging epidemiology strongly support the need for global coordination in stemming the generation and propagation of resistance, and the patchwork of global and country-level regulations still leaves significant gaps. More importantly, discussing such a framework opens the door to taking modular steps towards solving these challenges - for example, beginning among targeted parties rather than all countries, tying accountability to financial and technical support, or taxing antibiotic use in animals to deter low-value usage of these drugs. An international agreement would allow integrating surveillance data collection, monitoring and enforcement, research into antibiotic alternatives and more sustainable approaches to agriculture, technical assistance and capacity building, and financing under the umbrella of a One Health approach.

Matched MeSH terms: Food Industry
Fulltext Evaluation of extraction solvent on antioxidant activity, total phenolic and total flavonoid content in Elaeis Guineensis

Wan Zuraida Wan Mohd Zain, Siti Nur Lisha Mohd Ghazali, Samsiah Jusoh

ESTEEM Academic Journal, 2019;15(1):25-32.
MyJurnal

Oil palm or Elaeis guineens is a rich natural source of phenolic with flavonoid as the main constituents. These phenolics are potent antioxidants that can be used in the food industry, cosmetics and others. Therefore, the study was aimed to determine the effect of solvents which were methanol, ethyl acetate and hexane also different plant parts which were leaves, frond and fresh fruit bunch toward antioxidant activity (AOA), total phenolic content (TPC) and total flavonoid
content (TFC). The antioxidant was analysed using the DPPH method, TPC by Ciocalteu assay and TFC by aluminium chloride colorimetric assay. The result from ANOVA indicated that there was a difference (P < 0.05) in the extracting ability of each solvent and different plant parts for AOA, TPC and TFC. Generally, the result suggested that methanol give the highest antioxidant
activity, TPC and TFC compared to ethyl acetate and hexane. Therefore, the solvent used should be selected properly to allow for a high level of extraction efficiency.

Matched MeSH terms: Food Industry
Fulltext Separation of steviol glycosides from stevia rebaudiana using different aqueous extraction techniques

Mustapha bin Akil, Chong, Saw Peng, Norellia binti Bahari

Borneo International Journal of Biotechnology, 2020;1(1):77-87.
MyJurnal

Stevia rebaudiana has recently gained the attention of the food industry as one of the natural sweeteners. The sweet flavour is contributed by the glycoside compounds, especially the rebaudioside A and stevioside, which are the stevia main chemical markers. The aim of the work reported here was to compare the different extraction techniques of stevia leaves using different technologies such as the high pressure and ultrasonic on the extraction of steviol glycosides. In this paper, the extraction techniques yielding the highest glycosides from the leaves of Stevia rebaudiana were determined using hot water extraction (HWE), pressurised liquid extraction (PLE) and ultrasound-assisted extraction (UAE). The steviol glycoside yields were quantified by two chemical markers, rebaudioside A and stevioside of Stevia rebaudiana using highperformance liquid chromatography (HPLC) analysis. The result showed that the HWE managed to obtain 1,110 mg of steviol glycosides. The PLE obtained 294 mg steviol glycosides and the UAE obtained 427.5 mg steviol glycosides. As a conclusion, the results suggested the most efficient technique for stevia extraction in this study was the HWE.

Matched MeSH terms: Food Industry
Fulltext Isolation and Characterization of Six Vibrio parahaemolyticus Lytic Bacteriophages From Seafood Samples

Tan CW, Rukayadi Y, Hasan H, Abdul-Mutalib NA, Jambari NN, Hara H, et al.

Front Microbiol, 2021;12:616548.
PMID: 33776954 DOI: 10.3389/fmicb.2021.616548

Vibrio parahaemolyticus is a foodborne pathogen that is frequently isolated from a variety of seafood. To control this pathogenic Vibrio spp., the implementation of bacteriophages in aquaculture and food industries have shown a promising alternative to antibiotics. In this study, six bacteriophages isolated from the seafood samples demonstrated a narrow host range specificity that infecting only the V. parahaemolyticus strains. Morphological analysis revealed that bacteriophages Vp33, Vp22, Vp21, and Vp02 belong to the Podoviridae family, while bacteriophages Vp08 and Vp11 were categorized into the Siphoviridae family. All bacteriophages were composed of DNA genome and showed distinctive restriction fragment length polymorphism. The optimal MOI for bacteriophage propagation was determined to be 0.001 to 1. One-step growth curve revealed that the latent period ranged from 10 to 20 min, and the burst size of bacteriophage was approximately 17 to 51 PFU/cell. The influence of temperature and pH levels on the stability of bacteriophages showed that all bacteriophages were optimally stable over a wide range of temperatures and pH levels. In vitro lytic activity of all bacteriophages demonstrated to have a significant effect against V. parahaemolyticus. Besides, the application of a bacteriophage cocktail instead of a single bacteriophage suspension was observed to have a better efficiency to control the growth of V. parahaemolyticus. Results from this study provided a basic understanding of the physiological and biological properties of the isolated bacteriophages before it can be readily used as a biocontrol agent against the growth of V. parahaemolyticus.

Matched MeSH terms: Food Industry
Spray-dried alginate-coated Pickering emulsion stabilized by chitosan for improved oxidative stability and in vitro release profile

Surjit Singh CK, Lim HP, Tey BT, Chan ES

Carbohydr Polym, 2021 Jan 01;251:117110.
PMID: 33142647 DOI: 10.1016/j.carbpol.2020.117110

The commercial application of liquid-state Pickering emulsions in food systems remains a major challenge. In this study, we developed a spray-dried Pickering emulsion powder using chitosan as a Pickering emulsifier and alginate as a coating material. The functionality of the powder was evaluated in terms of its oxidative stability, pH-responsiveness, mucoadhesivity, and lipid digestibility. The Pickering emulsion powder was oxidatively more stable than the conventional emulsion powder stabilized by gum Arabic. The powder exhibited pH-responsiveness, whereby it remained intact in acidic pH, but dissolved to release the emulsion in 'Pickering form' at near-neutral pH. The Pickering emulsion powder was also mucoadhesive and could be digested by lipase in a controlled manner. These findings suggested that the multi-functional Pickering emulsion powder could be a potential delivery system for applications in the food industry.

Matched MeSH terms: Food Industry

Filters

Please provide feedback to Administrator ([email protected])

External Links