MyMedR

Displaying publications 41 - 56 of 56 in total

Abstract:

Sort:

Fulltext The Use of Hall's Technique Preformed Metal Crown (HTPMC) by Pediatric Dentists in Malaysia

Jesmin F, Kamarudin A, Baharin F, Ahmad WMABW, Mohammed M, Marya A, et al.

Biomed Res Int, 2021;2021:8424206.
PMID: 34977246 DOI: 10.1155/2021/8424206

Introduction: Hall's technique preformed metal crown (HTPMC) has been used widely by pediatric dentists in developed countries as a new approach for managing decayed primary molars without local anesthesia, caries removal, and tooth preparation. Currently, inadequate information is available regarding the implementation of this technique (HTPMC) in Malaysia. This study is aimed at evaluating the implementation of HTPMC by Malaysia's pediatric dentists and identify the co-occurrence frequencies of the HTPMC implementation with the respondents' demographic profile.
Materials and Methods: A cross-sectional questionnaire-based research was conducted among 65 pediatric dentists in Malaysia. Online questionnaires were distributed to the pediatric dentists employed at public hospitals (MOH) and universities in Malaysia.
Result: It was found that over half of the respondents (65.6%) employed HTPMC. The analysis of the co-occurrence network frequency revealed that a high frequency of female pediatric dentists who were within the age group of 31-40 years old had fulfilled their postgraduation overseas and was employed in the university mainly applied HTPMC.
Conclusion: The application of HTPMC among respondent pediatric dentists in Malaysia was high. However, most respondents considered HTPMC a treatment option only to manage carious primary molar rather than a treatment of choice.

Matched MeSH terms: Crowns/statistics & numerical data*
Edentulous arch treatment with a CAD/CAM screw-retained framework and cemented crowns: a clinical case report

Baig MR, Rajan G, Rajan M

J Oral Implantol, 2009;35(6):295-9.
PMID: 20017646 DOI: 10.1563/AAID-JOI-D-09-00012R1.1

This article describes the rehabilitation of a completely edentulous patient using a milled titanium implant framework and cemented crowns. This combined approach significantly offsets unsuitable implant position, alignment, or angulation, while ensuring the easy retrievability, repair, and maintenance of the prosthesis. Hence, the dual advantage of cemented-retained crowns reproducing appropriate esthetics and function, irrespective of where the screw access openings are located in the substructure, can be obtained, along with the splinting effect and management of soft and hard tissue deficits achievable with a screw-retained framework.

Matched MeSH terms: Crowns*
A Simple Technique for Accurate Transfer of Secondary Copings in a Tooth-Supported Telescopic Prosthesis

Shankargouda SB, Sidhu P, Kardalkar S, Desai PM

J Prosthodont, 2017 Feb;26(2):168-171.
PMID: 26479878 DOI: 10.1111/jopr.12385

Residual ridge resorption is a rapid, progressive, irreversible, and inevitable process of bone resorption. Long-standing teeth and implants have been shown to have maintained the bone around them without resorption. Thus, overdenture therapy has been proven to be beneficial in situations where few remaining teeth are present. In addition to the various advantages seen with tooth-supported telescopic overdentures, a few shortcomings can also be expected, including unseating of the overdenture, increased bulk of the prosthesis, secondary caries, etc. The precise transfer of the secondary telescopic copings to maintain the spatial relationship, without any micromovement, remains the most critical step in ensuring the success of the tooth-supported telescopic prosthesis. Thus, a simple and innovative technique of splinting the secondary copings was devised to prevent distortion and micromovement and maintain its spatial relationship.

Matched MeSH terms: Crowns
Enhanced post crown retention in resin composite-reinforced, compromised, root-filled teeth: a case report

Lui JL

Quintessence Int, 1999 Sep;30(9):601-6.
PMID: 10765865

The introduction of an intraradicular composite reinforcing technique, in conjunction with the reestablishment of matching post canal spaces, has allowed compromised, root-filled teeth to be restored with functional, esthetic post crowns. This clinical case report suggests that reconstituted post canals, in accurately adapting to passive, parallel-sided, matching, and well-fitting posts, can enhance the retention of post crowns. Other factors of clinical importance relating to the resin-reinforced technique are discussed, including fracture resistance, depth of polymerization, dentin adhesion, polymerization shrinkage, and coronal microleakage.

Matched MeSH terms: Crowns
Age estimation using third molar development

Phrabhakaran N

Malays J Pathol, 1995 Jun;17(1):31-4.
PMID: 8907002

Teeth are the most durable structures in the human body. The pattern of their development has been used as a credible technique of age determination of unidentified bodies. Dental age estimation is by comparison of the dental status of an individual with published dental surveys. The third molars are the last teeth to erupt and are regarded as the most variable in the dentition. Nevertheless, radiographs depicting their growth have been used to determine the chronological age. A case for actual need for age estimation using a developing third molar is presented here.

Matched MeSH terms: Crowns
Fulltext Students perception and satisfactory level in preclinical fixed prosthodontic teaching: post and core

Marlynda Ahmad, Natasya Ahmad Tarib

Malaysian Dental Journal, 2008;29(2):128-134.
MyJurnal

Introduction: Preclinical teaching using simulation is very beneficial in training dental graduates. The use of laboratory simulation for its undergraduate training during the preclinical years has been used in dental education. Purpose: The aim of this study was to evaluate student’s perception, self evaluation and satisfactory level in preparing duralay burn-out post and core in preclinical fixed prosthodontics sessions.

Materials and Methods: The participants comprised of 104 fourth year dental undergraduates in the Faculty of Dentistry Universiti Kebangsaan Malaysia. The students had undergone preclinical session for endodontics during the 3rd year and had already completed root canal treatment on single rooted tooth. The same tooth was used for preclinical post and core preparation. The gutta percha was partially removed and the root canal was prepared. They then proceeded with the preparation of duralay build-up/pattern based on the lecture, video demonstration and manual given. Once completed and satisfied with their work, students were asked to answer the questionnaires in the simulation manual.

Results: Student response rate was 88.46% (92/104). Majority of the students were satisfied with their canal preparation, with about 5mm gutta percha left apically, appropriately shaped canal with sufficient retention and resistance form. They also thought that the surface of the duralay was good with no voids. With regards to the coronal preparation, majority of them incorporated ferrule effect and prepared preliminary crown preparation. More than half of the students claimed the level of difficulty of this procedure was moderate. Furthermore, majority of them said that the lecture and the preclinical manual were sufficient and helpful. The help from the supervisors was also benefit in preparing duralay burnout post and core.

Conclusions: From this study, majority of fourth year dental students could perform appropriate canal preparation as well as duralay pattern post and core. Only one student did not feel competent and confident in doing canal preparation and duralay pattern post and core. Our teaching methods and aids were proven to help them in preparing these tasks.

Matched MeSH terms: Crowns
Fulltext Root-crown ratios of permanent teeth in Malay patients attending HUSM Dental Clinic

Norisa Othman, Haslina Taib, Norehan Mokhtar

Archives of Orofacial Sciences, 2011;6(1):21-26.
MyJurnal

The objectives of this study were to determine the normal mean value of the root-crown (R/C ratios) in Malay patients and their variations by gender and dental arch from orthopantomogram radiographs (OPGs). Two thousand nine hundred and twenty teeth with fully developed roots were measured from 112 OPGs. Subjects with history of maxillofacial trauma or orthodontic therapy were excluded. The mean age of the subjects was 19.1 (SD 2.08) years old for males while females 18.9 (SD 2.19) years old in the range from 15 to 22 years old. The intra-examiner reproducibility of the assessment method was good (Intraclass correlation coefficient 0.81). Results of this study showed that there was no significant difference between R/C ratios of males and females groups. However, the ratios of the antagonist teeth for both males and females were significantly greater in the mandible than in the maxilla (p

Study site: Dental clinic, Hospital Universiti Sains Malaysia

Matched MeSH terms: Crowns
Fulltext Medico-legal implications of dental prenatal age estimation with reference to a case report

Nambiar, P., Paul, G., Swaminathan, D., Nadesan, K.

Ann Dent, 2000;7(1):46-50.
MyJurnal

The estimation of age of human foetal remains is of great medico-legal importance. When the remains are intact and fresh, various morphological features such as crown-heel length, weight, appearance of ossification centres particularly around the ankles and knees and other parameters could be used to make a reasonable estimation of the period of gestation. In cases of criminal abortion, infanticide and child murder the question of age of the foetus, viability, live birth and a separate existence become very important. In practice, often at the time of detection, the remains are decomposed or skeletonised. In such a situation the examination of developing teeth will provide a reliable answer pertaining to the foetal age, the possibility of a separate existence and even the period of survival after birth. The.age determination from dental examination is possible from approximately 10 weeks intrauterine up to old age. The presence of neonatal line (birth line) in both dentine and enamel indicates live birth and a separate existence. It is possible that the time period of survival can be estimated by measuring postnatal deposition of these hard tissues. An intact human foetus that has undergone mild to moderate putrefaction was studied. The study of the morphological features and the ossification centres suggested that its approximate age was around nine months intrauterine. It was not possible to decide whether it was a live birth and had a separate existence. The examination of the developing first deciduous molar of the mandible suggested the approximate age was around 30-32 weeks intrauterine. The importance of examination of developing teeth in foetal remains (including neonates), particularly associated with putrefaction or skeletonisation is emphasized.

Matched MeSH terms: Crowns
Effects of different implant-abutment connections on micromotion and stress distribution: prediction of microgap formation

Saidin S, Abdul Kadir MR, Sulaiman E, Abu Kasim NH

J Dent, 2012 Jun;40(6):467-74.
PMID: 22366313 DOI: 10.1016/j.jdent.2012.02.009

The aim of this study was to analyse micromotion and stress distribution at the connections of implants and four types of abutments: internal hexagonal, internal octagonal, internal conical and trilobe.

Matched MeSH terms: Crowns
Fulltext Immediate placement and loading of implants in anterior maxilla using an altered screw-retained implant fixed prosthesis

Baig MR, Rajan G

Indian J Dent Res, 2010 Apr-Jun;21(2):311-3.
PMID: 20657109 DOI: 10.4103/0970-9290.66635

This article describes the immediate placement and loading of implants in the aesthetic zone using an implant-retained, fixed prosthesis with a modified design. One section of the implant prosthesis has cemented crowns and the other section is the conventional screw-retained. This combined approach significantly offsets the unsuitable implant position, alignment or angulation, while ensuring the easy retrievability, repair and maintenance of the prosthesis at the same time.

Matched MeSH terms: Crowns
Fulltext Outcomes of placing short implants in the posterior mandible: a preliminary randomized controlled trial

Al-Hashedi AA, Taiyeb-Ali TB, Yunus N

Aust Dent J, 2016 06;61(2):208-18.
PMID: 25966305 DOI: 10.1111/adj.12337

BACKGROUND: Short dental implants can be an alternative to bone augmentation procedures at sites of reduced alveolar bone. Most studies on short implants are retrospective or multicentre reports that lack controlled and consistent comparison between different systems. This study aimed to compare clinical and radiographic outcomes of short implants in two different systems in the posterior mandible.
METHODS: Twenty patients with two adjacent missing posterior teeth were recruited. Patients were assigned equally and randomly into two groups; Bicon(®) (6 or 8 mm) and Ankylos(®) (8 mm) implants. A two-stage surgical approach and single crowns were used for implant placement and loading. Outcomes included peri-implant clinical parameters, implant stability (Periotest values; PTVs) and peri-implant bone changes, which were assessed at baseline, 2, 6 and 12 months post-loading.
RESULTS: No implant loss was encountered up to 12 months post-loading. No significant difference in the clinical or radiographic parameters was observed except for PTVs (p < 0.05) that was lower in Ankylos(®) implants.
CONCLUSIONS: The use of short dental implants was associated with excellent 12 months clinical and radiographic outcomes. Ankylos(®) and Bicon(®) implants demonstrated similar peri-implant soft tissue and alveolar bone changes. However, Ankylos(®) implants demonstrated better implant stability at all evaluation intervals.

Matched MeSH terms: Crowns
Peri-implant soft tissue integration of immediately loaded implants in the posterior macaque mandible: a histomorphometric study

Siar CH, Toh CG, Romanos G, Swaminathan D, Ong AH, Yaacob H, et al.

J. Periodontol., 2003 May;74(5):571-8.
PMID: 12816287

Today, one critical goal in implant placement is the achievement of optimal soft tissue integration. Reports thus far have demonstrated successful soft tissue preservation in delayed loaded implants placed in anterior jaws. The aim of this study was to histomorphometrically examine the soft tissues around immediately loaded implants placed in the macaque posterior mandible.

Matched MeSH terms: Crowns
Treatment of a maxillary dento-alveolar defect using an immediately loaded definitive zygoma implant-retained prosthesis with 11-month follow-up: a clinical report

Baig MR, Rajan G

J Oral Implantol, 2010;36(1):31-5.
PMID: 20218868 DOI: 10.1563/AAID-JOI-D-09-00062

This article describes the dental implant-based rehabilitation of a partially edentulous patient with a unilateral maxillary dento-alveolar defect. A screw-retained prosthesis with a modified design was fabricated on zygomatic and regular dental implants. One section of the implant prosthesis has cemented crowns and the other section is conventional screw-retained. The design of the prosthesis overcame the hard and soft tissue deficit and provided the desired esthetics.

Matched MeSH terms: Crowns
Multidisciplinary treatment approach to restore deep horizontally fractured maxillary central incisor

Patil PG, Nimbalkar-Patil SP, Karandikar AB

J Contemp Dent Pract, 2014 Jan 1;15(1):112-5.
PMID: 24939276

This case report demonstrates sequential periodontic, orthodontic and prosthodontic treatment modalities to save and restore deep horizontally fractured maxillary central incisor. The location of fracture was deep in the mucosa which reveals less than 2 mm of tooth structure to receive the crown. The procedures like surgical crown lengthening, endodontic post placement, orthodontic forced eruption, core build-up and metal-ceramic crown restoration were sequentially performed to conserve the fractured tooth. Forced eruption is preferred to surgical removal of supporting alveolar bone, since forced eruption preserves the biologic width, maintains esthetics, and at the same time exposes sound tooth structure for the placement of restorative margins.

Matched MeSH terms: Crowns
Remaining tooth structure associated with various preparation designs for the endodontically treated maxillary second premolar

Seow LL, Toh CG, Wilson NH

Eur J Prosthodont Restor Dent, 2005 Jun;13(2):57-64.
PMID: 16011232

Existing literature suggests a relationship between the amount of remaining tooth structure and the fracture resistance of the restored endodontically treated tooth. This study investigated the amount of tooth structure remaining following various tooth preparations used in the restoration of the endodontically treated maxillary second premolar. Illustrations of the maxillary second premolar in buccopalatal, mesiodistal and occlusal sections were drawn to scale. Outlines of various intra- and extracoronal preparations were superim-posed on the illustrations to reveal the amount of tooth tissue remaining in each case. Preparations for a ceramic inlay, inlay with palatal cusp coverage and onlay left 2.0-2.5mm of tooth structure buccally and palatally. Following preparation for a metal-ceramic crown, approximately 1.0mm of tooth structure remained buccally, and between 1.6mm-1.8mm palatally. Preparation for an all-ceramic crown was observed to leave 1.0mm-1.2mm of tooth structure surrounding what remained of the endodontic access cavity. It was concluded that decisions as to the type of definitive restoration to restore the endodontically treated maxillary second premolar may be influenced, amongst other factors, by information on the amount of tooth tissue remaining following preparation.

Matched MeSH terms: Crowns
The use of implants in the occlusal rehabilitation of a partially edentulous patient: a clinical report

Yunus N, Abdullah H, Hanapiah F

J Prosthet Dent, 2001 Jun;85(6):540-3.
PMID: 11404753

This article describes the occlusal rehabilitation of a partially edentulous patient who did not want a removable partial denture. Implants and extensive fixed restorations were used to restore posterior support and treat severely worn dentition, respectively. The treatment offered the patient a functional and esthetic result.

Matched MeSH terms: Crowns

Filters

Please provide feedback to Administrator ([email protected])

External Links