Displaying publications 41 - 60 of 87 in total

Abstract:
Sort:
  1. Chye, S.J., Ahmad, R., Noor Aziah, A.A.
    MyJurnal
    This study was carried out to improve the nutritional value of goat’s milk dadih by the addition of tropical-fruit purees, namely, jackfruit (Artocarpus heterophyllus, Lam.), pineapple (Ananas comosus) and papaya (Carica papaya). Dadih with added fruits were compared with the control (without fruit puree) for physical, chemical and sensory attributes. The texture properties of the tropical- fruit dadih were significantly different (p< 0.05) from the control. Control dadih showed highest values for lightness and hue (p< 0.05) as compared to tropical- fruit dadih. The addition of tropical- fruit purees significantly increased (p< 0.05) the moisture, protein, ash and vitamin C contents of the fruit added dadih. There were no significant differences (p> 0.05) in the fat, carbohydrate, energy and total soluble solid contents. Sensory evaluations using a hedonic test showed that all dadih were acceptable. Overall, syneresis of the dadih increased with decreasing pH throughout storage at 4°C.
    Matched MeSH terms: Flavoring Agents
  2. Haslaniza, H., Maskat, M. Y, Wan Aida, W. M., Mamot, S., Saadiah, I.
    MyJurnal
    Cockle (Anadara granosa) meat wash water precipitate was hydrolyzed using bromelain. Experiments were carried out to determine optimum conditions for temperature, enzyme concentration and hydrolysis time using response surface methodology (RSM) based on a central composite rotatable design (CCRD) to obtain the highest value of nitrogen content (NC) and degree of hydrolysis (DH). Results revealed that the optimum conditions for temperature, enzyme concentration and hydrolysis time were 33.7°C, 1.45% (E/S) and 28.42 hrs, respectively. At the optimum condition, hydrolysis of cockle meat wash water precipitate using bromelain resulted in a NC of 0.6% and DH of 48%. The NC and DH were significantly influenced by temperature, enzyme concentration and hydrolysis time. When the bromelain concentration, hydrolysis time and temperature were increased, the values of NC and DH also increased. The hydrolysate produced contained flavor compounds found in clam and oyster which were 3-methylbutanol and 1-pentanol. The compound 3-MCPD was not found in the hydrolysate.
    Matched MeSH terms: Flavoring Agents
  3. Herpandi, Huda, N., Rosma, A., Wan Nadiah W. A.
    MyJurnal
    Protein-rich by-products from the canning industry, especially dark flesh of skipjack, have limited uses due to several factors such as darken color, susceptibility to oxidation and off flavour. Protein hydrolysates from skipjack dark flesh was produced with different type of industrial proteases (Alcalase®2.4L FG, Protamex®, Neutrase®1.5MG and Flavourzyme®500MG) for 60, 120, 180 and 240 min with level of proteases used of 0.5, 1, 1.5 and 2% per weight of raw material. The degree of hydrolysis and free tryptophan content of hydrolysate were investigated. The results shows longer time with higher concentration of enzyme has increased the degree of hydrolysis. Alcalase®2.4L FG had the highest degree of hydrolysis among all proteases followed by Protamex®, Flavourzyme®500MG and Neutrase® 1.5MG. All enzymes increase free tryptophan content linearly with the increament of protease enzyme level. The longer the hydrolysis time, the higher the content of free tryptophan produced.
    Matched MeSH terms: Flavoring Agents
  4. Phebe, D., Ong, P.T.
    MyJurnal
    ‘Kampuchea’ guavas were treated with 300, 600 and 900 nL L‾¹ 1-methylcyclopropene (1-MCP) for 0,
    3 and 6 h, and stored at 27˚C with 70% relative humidity. The C* values, soluble solids concentration, titratable acidity and pH of these fruits were not affected by both the 1-MCP concentrations and exposure duration while h˚ values and flesh firmness were affected by these treatments. The L* values, vitamin C content and weight loss were affected by the concentrations of 1-MCP, but not by the exposure duration. Less weight loss and disease incidence in fruit treated with 600 and 900 nL L-1 1-MCP. Fruit exposed to 6 h 1-MCP showed lowest disease incidence compared to other exposure duration in 5 days of storage. Treating Kampuchea guava fruit with 600 nL L‾¹ 1-MCP and exposure duration of 6 h was able to retain fruit colour, flesh firmness and delayed disease development for 5 days.
    Matched MeSH terms: Flavoring Agents
  5. Nor NM, Carr A, Hardacre A, Brennan CS
    Foods, 2013 May 14;2(2):160-169.
    PMID: 28239106 DOI: 10.3390/foods2020160
    Pumpkin products confer natural sweetness, desirable flavours and β-carotene, a vitamin A precursor when added as ingredients to extruded snacks. Therefore, a potential use for dried pumpkin flour is as an ingredient in ready-to-eat (RTE) snack foods. Growth in this market has driven food manufacturers to produce a variety of new high value snack foods incorporating diverse ingredients to enhance the appearance and nutritional properties of these foods. Ready-to-eat snacks were made by extruding corn grits with 5%, 10%, 15% and 20% of pumpkin flour. Snacks made from 100% corn grits were used as control products for this work. The effect of formulation and screw speeds of 250 rpm and 350 rpm on torque and specific mechanical energy (SME, kWh/kg), physical characteristics (expansion ratio, bulk density, true density and hardness) and the microstructure of the snacks were studied. Increasing the screw speed resulted in a decrease of torque for all formulations. When pumpkin flour was added the specific mechanical energy (SME) decreased by approximately 45%. Increasing the percentage of pumpkin flour at the higher screw speed resulted in a harder texture for the extruded products. X-ray tomography of pumpkin flour-corn grit snacks showed that increased levels of pumpkin flour decreased both the bubble area and bubble size. However, no significant differences (p > 0.05) in bubble wall thickness were measured. By understanding the conditions during extrusion, desirable nutritional characteristics can be incorporated while maximizing expansion to make a product with low bulk density, a fine bubble structure and acceptable organoleptic properties.
    Matched MeSH terms: Flavoring Agents
  6. Othman NA, Abdul Manaf M, Harith S, Wan Ishak WR
    J Am Coll Nutr, 2018 04 13;37(7):583-588.
    PMID: 29652576 DOI: 10.1080/07315724.2018.1451408
    OBJECTIVE: The feasibility of developing reduced-fat muffins with avocado is investigated by preparing muffins with 25%, 50%, 75%, and 100% avocado purée as a fat (butter) replacer.

    METHODOLOGY: The resulting products were compared to the control muffin, which was made with 100% butter. Muffins were analyzed for nutritional content, fatty acid profiles, and sensory acceptability.

    RESULT: Muffins incorporated with avocado purée revealed a significant increase (p < 0.05) with respect to moisture, ash, and carbohydrate in comparison with the control sample. However, no significant changes (p > 0.05) were detected in all muffin formulations for protein and dietary fiber content. Both fat content and caloric value of muffins incorporated with avocado purée were significantly decreased (p < 0.05). The fatty acid profile showed that there was an increment in the monounsaturated fatty acids (MUFA) content by 16.51% at full-fat substitution. The sensory evaluation test demonstrated that muffins had acceptability at up to 50% substitution. Fat substitution at higher than 50% lead to undesirable flavor and aftertaste, which was significant (p < 0.05) to the panelists.

    CONCLUSION: The findings indicated the feasibility of avocado purée in fat-reduced muffin preparation with an optimal level of 50% avocado purée substitution.

    Matched MeSH terms: Flavoring Agents
  7. Gumel AM, Annuar MSM
    3 Biotech, 2016 Jun;6(1):24.
    PMID: 28330099 DOI: 10.1007/s13205-015-0355-9
    Enzymatic catalysis is considered to be among the most environmental friendly processes for the synthesis of fine chemicals. In this study, lipase from Thermomyces lanuginosus (Lecitase Ultra™) was used to catalyze the synthesis of flavor esters, i.e., methyl butanoate and methyl benzoate by esterification of the acids with methanol in a microfluidic system. Maximum reaction rates of 195 and 115 mM min(-1) corresponding to catalytic efficiencies (k cat/K M) of 0.30 and 0.24 min(-1) mM(-1) as well as yield conversion of 54 and 41 % were observed in methyl butanoate and methyl benzoate synthesis, respectively. Catalytic turnover (k cat) was higher for methyl butanoate synthesis. Rate of synthesis and yield decreased with increasing flow rates. For both esters, increase in microfluidic flow rate resulted in increased advective transport over molecular diffusion and reaction rate, thus lower conversion. In microfluidic synthesis using T. lanuginosus lipase, the following reaction conditions were 40 °C, flow rate 0.1 mL min(-1), and 123 U g(-1) enzyme loading found to be the optimum operating limits. The work demonstrated the application of enzyme(s) in a microreactor system for the synthesis of industrially important esters.
    Matched MeSH terms: Flavoring Agents
  8. Loong, C.Y.L., Wong, C.Y.H.
    Food Research, 2018;2(4):320-330.
    MyJurnal
    Incorporation of Green Banana Flour (BF) into Chinese steamed bread (CSB) may be a
    strategy to fortify the traditional CSB due to its health benefits. However, BF-incorporated
    foods in general, have poorer sensory properties affecting consumer acceptability. The aim
    of this study was to examine the adjustment of water content from the original formulation
    and addition of coffee flavour on physical properties and consumer acceptability of BFincorporated
    CSB. Wheat flour as control was substituted with 15% BF varied by addition
    of 30% water and coffee flavour. Physical analysis (colour, volume, spread ratio and
    texture) of CSB and hedonic test for appearance, aroma, flavour, overall acceptability and
    preference ranking of CSB were conducted. Results showed no significant differences
    (p>0.05) in specific volume, springiness, and adhesiveness among samples. A significant
    increase (p
    Matched MeSH terms: Flavoring Agents
  9. Mohammad Moneruzzaman Khandaker, Normaniza Osman, Abm Sharif Hossain, Amru Nasrulhaq Boyce
    Sains Malaysiana, 2012;41:553-560.
    A study was carried out to investigate the effects of different girdling techniques on the growth, development and quality of red wax apple fruits (Syzygium samarangense). Selected horticultural parameters were monitored at one week interval during the growth period from December 2008 to October 2010, using I, C, V shaped, 50%, and 100% girdling. Girdling was applied 2 weeks before flowering. The results showed that the C-shaped girdling technique produced the best results with regard to the fruit setting and chlorophyll content in comparison to the control and the other girdling
    techniques employed. Furthermore, C-shaped girdling enhanced faster fruit growth producing the best final fruit length and diameter. In addition to significantly increased yield, juice percentage, leaf dry matter, biomass and TSS content of fruits. It was also observed that 50% girdling decreased fruit dropping. V-shaped girdling also increased the number of bud and reduced bud dropping compared to control. I-shaped girdle fruits produced the highest amount of K+ content in fruit juice compared to other treatments. The color development of the fruit peel in 100% girdling was also the highest among the treatments. From this study, it can be concluded that C-shaped girdling applied two weeks before flowering produced better fruit growth, yield and quality of red wax apple fruits under field conditions.
    Matched MeSH terms: Flavoring Agents
  10. Nur Aainaa Syahirah Ramli, Nur Irsalina Hisham, Nor Aishah Saidina Amin
    Sains Malaysiana, 2018;47:1131-1138.
    Levulinic acid (LA) is one of biomass derived building block chemicals with various applications. Catalytic esterification
    of LA with alkyl alcohol produces levulinate ester which can be applied as fragrance, flavouring agents, as well as fuel
    additives. In this study, a series of sulfated silica (SiO2
    ) catalyst was prepared by modification of SiO2
    with sulfuric acid
    (H2
    SO4
    ) at different concentrations; 0.5 M to 5 M H2
    SO4
    . The catalysts were characterized, and tested for esterification
    of LA with ethanol to ethyl levulinate (EL). The effect of various reaction parameters including reaction time, catalyst
    loading and molar ratio of LA to ethanol on esterification of LA to EL were inspected. The catalyst with high concentration
    of acid sites seemed suitable for LA esterification to EL. Among the sulfated SiO2
    catalysts tested (0.5 M-SiO2
    , 1 M-SiO2
    ,
    3 M-SiO2
    and 5 M-SiO2
    ), 3 M-SiO2
    exhibited the highest performance with the optimum EL yield of 54% for reaction
    conducted at reflux temperature for 4 h, 30% 3 M-SiO2
    loading and LA to ethanol molar ratio of 1:20. Besides, the
    reusability of 3 M-SiO2
    catalyst for LA esterification with ethanol was examined for five cycles. Esterification of LA with
    methanol and 1-butanol were also carried out for methyl levulinate (ML) and butyl levulinate (BL) productions with 69%
    and 40% of ML and BL yields, respectively. This study demonstrates the potential of sulfated SiO2
    catalyst for levulinate
    ester production from LA at mild process condition.
    Matched MeSH terms: Flavoring Agents
  11. Noor Zuhartini Md Muslim, Musa Ahmad, Lee YH, Bahruddin Saad
    Sains Malaysiana, 2018;47:707-713.
    An optical fiber chemical sensor for the determination of free glutamate in food samples was fabricated based on the
    immobilization of 0.1 M copper(II) nitrate trihydrate onto sol-gel glass powder which was then mixed with methyl cellulose
    to form a pellet. A distinctive colour change from light blue to dark blue was observed in the presence of glutamate in
    less than 1 min. The colour change was measured by reflectance spectrophotometer at 691 nm. A linear relationship
    between the reflectance intensity and glutamate concentration was observed in the range of 12.5 to 500 mM with a limit
    of detection of 10.6 mM. This method is also reproducible with a relative standard deviation of less than 5%, no effect on
    pH of the glutamate solution and a good recovery of above 80%. The sensor was used for the determination of glutamate
    in common food items such as soups and flavor enhancers. The results obtained from the fabricated sensor were found
    to be comparable with HPLC method.
    Matched MeSH terms: Flavoring Agents
  12. Lim, J.Y., Wan Rosli, W.l.
    MyJurnal
    Consumption of dietary fibre-rich food has been associated with various beneficial physiological properties and health effects. Presently, different types of natural fibre-rich ingredients are added into variety of bakery-based products to improve it fibre content for health promotional purposes. However, majority of these products are frequently added with imported dietary fibre ingredients. In the present study, bread samples were prepared with Zea mays ear (young corn) powder at the levels of either 2%, 4% or 6%. The bread samples were analyzed for nutritional composition, textural properties and sensory acceptance. Addition of young corn powder (YCP) at the level of 6% increases total dietary fibre (from 3.48% to 5.26%), moisture (from 25.64% to 26.55%), fat (from 4.35% to 4.61%) and protein content (from 9.13% to 9.51%) significantly. However, with the increasing of YCP levels in the bread, the carbohydrate content was decreased significantly (from 59.93% to 58.34%) while the ash content (from 0.95% to 0.99%) was not significantly affected. Results of texture profile analysis indicated that addition of YCP up to 6% not significantly affected the springiness (1.01-1.00) but significantly decreased cohesiveness (0.95-0.82). However, the addition of YCP up to 6% has increased hardness (0.18kg-0.57kg), gumminess (0.17kg-0.47kg) and chewiness (0.18kg-0.47kg) attributes of bread samples. On the other result, the sensory evaluation shows that the flavour score was not significantly affected by addition of YCP up to 4% (4.82-4.52) while the tenderness (4.53-4.42), elasticity (4.75-4.58), aroma (4.40-4.47), colour (4.93-4.55) and overall acceptance (4.80-4.35) scores were not significant affected up to 6%. In summary, breads with 4% addition of YCP were considered to be acceptable and potentially used in improving nutritional composition without changing sensory score.
    Matched MeSH terms: Flavoring Agents
  13. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Phys Rev Lett, 2017 Dec 01;119(22):221802.
    PMID: 29286783 DOI: 10.1103/PhysRevLett.119.221802
    A search for a signal consistent with the type-III seesaw mechanism in events with three or more electrons or muons is presented. The data sample consists of proton-proton collisions at sqrt[s]=13  TeV collected by the CMS experiment at the LHC in 2016 and corresponds to an integrated luminosity of 35.9  fb^{-1}. Selection criteria based on the number of leptons and the invariant mass of oppositely charged lepton pairs are used to distinguish the signal from the standard model background. The observations are consistent with the expectations from standard model processes. The results are used to place limits on the production of heavy fermions of the type-III seesaw model as a function of the branching ratio to each lepton flavor. In the scenario of equal branching fractions to each lepton flavor, heavy fermions with masses below 840 GeV are excluded. This is the most sensitive probe to date of the type-III seesaw mechanism.
    Matched MeSH terms: Flavoring Agents
  14. Tan MM, Chan CK, Reidpath DD
    PMID: 24319472 DOI: 10.1155/2013/146214
    Objectives. To systematically review articles investigating the relationship between religion and spirituality (R/S) and fruit, vegetable, and fat intake. Methods. PubMed, CINAHL, and PsycInfo were searched for studies published in English prior to March 2013. The studies were divided into two categories: denominational studies and degree of R/S studies. The degree of R/S studies was further analyzed to (1) determine the categories of R/S measures and their relationship with fruit, vegetable, and fat intake, (2) evaluate the quality of the R/S measures and the research design, and (3) determine the categories of reported relationship. Results. Thirty-nine studies were identified. There were 14 denominational studies and 21 degree of R/S studies, and 4 studies were a combination of both. Only 20% of the studies reported validity and 52% reported reliability of the R/S measures used. All studies were cross-sectional, and only one attempted mediation analysis. Most studies showed a positive association with fruit and vegetable intake and a mixed association with fat intake. Conclusion. The positive association between R/S and fruit and vegetable intake may be one possible link between R/S and positive health outcome. However, the association with fat intake was mixed, and recommendations for future research are made.
    Matched MeSH terms: Flavoring Agents
  15. Chuah LO, Ho WY, Beh BK, Yeap SK
    PMID: 23990846 DOI: 10.1155/2013/751658
    Garcinia is a plant under the family of Clusiaceae that is commonly used as a flavouring agent. Various phytochemicals including flavonoids and organic acid have been identified in this plant. Among all types of organic acids, hydroxycitric acid or more specifically (-)-hydroxycitric acid has been identified as a potential supplement for weight management and as antiobesity agent. Various in vivo studies have contributed to the understanding of the anti-obesity effects of Garcinia/hydroxycitric acid via regulation of serotonin level and glucose uptake. Besides, it also helps to enhance fat oxidation while reducing de novo lipogenesis. However, results from clinical studies showed both negative and positive antiobesity effects of Garcinia/hydroxycitric acid. This review was prepared to summarise the update of chemical constituents, significance of in vivo/clinical anti-obesity effects, and the importance of the current market potential of Garcinia/hydroxycitric acid.
    Matched MeSH terms: Flavoring Agents
  16. Tan PY, Tan CP, Abas F, Ho CW, Mustapha WA
    Molecules, 2013 Jun 10;18(6):6792-803.
    PMID: 23752466 DOI: 10.3390/molecules18066792
    Palm sugar-like flavouring (PSLF) is a type of flavour product that is formed by heating amino acids and sugar under specific heating conditions. Unfortunately, PSLF has a salty taste and contains high amounts of acrylamide. Hence, the objective of this research was to reduce saltiness and acrylamide without negatively affecting the aroma properties of PSLF. A decrease in the sodium phosphate (NaHPO₄) buffer concentration from 0.20 to 0.02 M was found to reduce sodium to approximately 15% of the level found in original PSLF. A further decrease (~25%) in the sodium content was achieved by removing monobasic sodium phosphate (NaH₂PO₄) from the buffer system. Meanwhile, the addition of CaCl₂ at 20-40 mg/L reduced the acrylamide content in PSLF by as much as 58%. A CaCl₂ concentration of 20 mg/mL was most favourable as it most efficiently suppressed acrylamide formation while providing an acceptably high flavour yield in PSLF. In view of the high acrylamide content in PSLF, additional work is necessary to further reduce the amount of acrylamide by controlling the asparagine concentration in the precursor mixture.
    Matched MeSH terms: Flavoring Agents/chemistry*
  17. Feng Y, Ping Tan C, Zhou C, Yagoub AEA, Xu B, Sun Y, et al.
    Food Chem, 2020 Sep 15;324:126883.
    PMID: 32344350 DOI: 10.1016/j.foodchem.2020.126883
    Freeze-thaw cycles (FTC) pretreatment was employed before the vacuum freeze-drying of garlic slices, aimed at improving the drying process and the quality of the end product. Cell viability, water status, internal structure, flavor, chemical composition and thermogravimetric of garlic samples were evaluated. The results indicated that FTC pretreatment reduced the drying time (22.22%-33.33%) and the energy consumption (14.25%-15.50%), owing to the water loss, the increase in free water, and the formation of porous structures. The FTC pretreatment improved thermal stability, flavor and chemical composition content of dried products. The antioxidant activity of polysaccharides extracted from FTC pretreated dried products was higher than that of the unpretreated dried product due to the reduction in polysaccharide molecular weight. This research could pave a route for future production of dried garlic slices having good quality by using the FTC pretreatment, with lower energy consumption and shorter drying time.
    Matched MeSH terms: Flavoring Agents/analysis
  18. Zzaman W, Bhat R, Yang TA, Easa AM
    J Sci Food Agric, 2017 Oct;97(13):4429-4437.
    PMID: 28251656 DOI: 10.1002/jsfa.8302
    BACKGROUND: Roasting is one of the important unit operations in the cocoa-based industries in order to develop unique flavour in products. Cocoa beans were subjected to roasting at different temperatures and times using superheated steam. The influence of roasting temperature (150-250°C) and time (10-50 min) on sugars, free amino acids and volatile flavouring compounds were investigated.

    RESULTS: The concentration of total reducing sugars was reduced by up to 64.61, 77.22 and 82.52% with increased roasting temperature at 150, 200 and 250°C for 50 min, respectively. The hydrophobic amino acids were reduced up to 29.21, 36.41 and 48.87% with increased roasting temperature at 150, 200 and 250°C for 50 min, respectively. A number of pyrazines, esters, aldehydes, alcohols, ketones, carboxyl acids and hydrocarbons were detected in all the samples at different concentration range. Formation of the most flavour active compounds, pyrazines, were the highest concentration (2.96 mg kg-1 ) at 200°C for 10 min.

    CONCLUSION: The superheated steam roasting method achieves the optimum roasting condition within a short duration Therefore, the quality of cocoa beans can be improved using superheated steam during the roasting process. © 2017 Society of Chemical Industry.

    Matched MeSH terms: Flavoring Agents/chemistry*
  19. Mohamed HN, Man YC, Mustafa S, Manap YA
    Molecules, 2012 May 03;17(5):5062-80.
    PMID: 22555296 DOI: 10.3390/molecules17055062
    Budu is a famous Malaysian fish sauce, usually used as seasoning and condiment in cooking. Budu is produced by mixing fish and salt at certain ratio followed by fermentation for six months in closed tanks. In this study, four commercial brands of Budu were analyzed for their chemical properties (pH, salt content and volatile compounds). The pH of Budu samples ranged from 4.50-4.92, while the salt (NaCl) content ranged between 11.80% and 22.50% (w/v). For tentative identification of volatile flavor compounds in Budu, two GC columns have been used, DB-WAX and HP-5MS. A total of 44 volatile compounds have been detected and 16 were common for both columns. 3-Methyl-1-butanol, 2-methylbutanal, 3-methylbutanal, dimethyl disulfide, 3-(methylthio)-propanal, 3-methylbutanoic acid and benzaldehye have been identified as the aroma-active compounds in Budu due to their lower threshold values.
    Matched MeSH terms: Flavoring Agents/analysis*
  20. Lasekan O, Hussein FK
    Chem Cent J, 2018 Dec 19;12(1):140.
    PMID: 30569201 DOI: 10.1186/s13065-018-0505-3
    BACKGROUND: Pineapple is highly relished for its attractive sweet flavour and it is widely consumed in both fresh and canned forms. Pineapple flavour is a blend of a number of volatile and non-volatile compounds that are present in small amounts and in complex mixtures. The aroma compounds composition may be used for purposes of quality control as well as for authentication and classification of pineapple varieties.

    RESULTS: The key volatile compounds and aroma profile of six pineapple varieties grown in Malaysia were investigated by gas chromatography-olfactometry (GC-O), gas-chromatography-mass spectrometry and qualitative descriptive sensory analysis. A total of 59 compounds were determined by GC-O and aroma extract dilution analysis. Among these compounds, methyl-2-methylbutanoate, methyl hexanoate, methyl-3-(methylthiol)-propanoate, methyl octanoate, 2,5-dimethyl-4-methoxy-3(2H)-furanone, δ-octalactone, 2-methoxy-4-vinyl phenol, and δ-undecalactone contributed greatly to the aroma quality of the pineapple varieties, due to their high flavour dilution factor. The aroma of the pineapples was described by seven sensory terms as sweet, floral, fruity, fresh, green, woody and apple-like.

    CONCLUSION: Inter-relationship between the aroma-active compounds and the pineapples revealed that 'Moris' and 'MD2' covaried majorly with the fruity esters, and the other varieties correlated with lesser numbers of the fruity esters. Hierarchical cluster analysis (HCA) was used to establish similarities among the pineapples and the results revealed three main groups of pineapples.

    Matched MeSH terms: Flavoring Agents
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links