MyMedR

Displaying publications 41 - 60 of 144 in total

Abstract:

Sort:

Fulltext Stability assessment of injectable castor oil-based nano-sized emulsion containing cationic droplets stabilized by poloxamer-chitosan emulsifier films

Tamilvanan S, Kumar BA, Senthilkumar SR, Baskar R, Sekharan TR

AAPS PharmSciTech, 2010 Jun;11(2):904-9.
PMID: 20496017 DOI: 10.1208/s12249-010-9455-3

The objectives of the present work were to prepare castor oil-based nano-sized emulsion containing cationic droplets stabilized by poloxamer-chitosan emulgator film and to assess the kinetic stability of the prepared cationic emulsion after subjecting it to thermal processing and freeze-thaw cycling. Presence of cryoprotectants (5%, w/w, sucrose +5%, w/w, sorbitol) improved the stability of emulsions to droplet aggregation during freeze-thaw cycling. After storing the emulsion at 4 degrees C, 25 degrees C, and 37 degrees C over a period of up to 6 months, no significant change was noted in mean diameter of the dispersed oil droplets. However, the emulsion stored at the highest temperature did show a progressive decrease in the pH and zeta potential values, whereas the emulsion kept at the lowest temperatures did not. This indicates that at 37 degrees C, free fatty acids were formed from the castor oil, and consequently, the liberated free fatty acids were responsible for the reduction in the emulsion pH and zeta potential values. Thus, the injectable castor oil-based nano-sized emulsion could be useful for incorporating various active pharmaceutical ingredients that are in size from small molecular drugs to large macromolecules such as oligonucleotides.

Matched MeSH terms: Drug Stability
Validation of LC for the determination of alpha-mangostin in mangosteen peel extract: a tool for quality assessment of Garcinia mangostana L

Yodhnu S, Sirikatitham A, Wattanapiromsakul C

J Chromatogr Sci, 2009 Mar;47(3):185-9.
PMID: 19298703

Mangosteen, Garcinia mangostana L., is known as the "Queen of fruits" and can be cultivated in the tropical rainforest such as Malaysia, Indonesia, and Thailand. Compounds isolated from the fruit peel of mangosteen contain abundant xanthones (especially alpha-mangostin). It has been used as traditional medicine such as anti-inflammatory and antibacterial and is popularly applied to cosmetic and pharmaceutical products. However, there is little information for quality and quantity determination of alpha-mangostin in mangosteen. Thus, the aim of this study was to set up a validated and stability-indicated isocratic reverse-phase high-performance liquid chromatographic (HPLC) method for quality control and quantity determination of a-mangostin from mangosteen peel extract. The assay was fully validated and shown to be linear (r(2) > 0.999), sensitive (LOD = 0.02 microg/mL and LOQ = 0.08 microg/mL), accurate (intra-day was between 98.1-100.8%, inter-day was between 90.0-101.3%), precise (intra-day variation < or = 1.8%, inter-day variation < or = 4.3%), specific, and with good recovery. Total analysis was approximately 8 min. The finalized method is also a stability-indicating assay. The present method should be useful for analytical research and for routine quality control analysis of alpha-mangostin in mangosteen peel extract and products of mangosteen.

Matched MeSH terms: Drug Stability
Effects of pH on the functional properties of chicken muscle proteins- modified waxy cornstarch blends

Zhang Q, Noryati I, Cheng LH

J Food Sci, 2008 Mar;73(2):E82-7.
PMID: 18298729 DOI: 10.1111/j.1750-3841.2007.00627.x

Chicken breast muscle powder (CBMP) and modified waxy cornstarch (MWCS) blends were prepared at different pH conditions (pH 4, 5, 6, 7, 8, and 9). The blends were characterized by light microscopy, frequency sweep, flow analysis, and freeze-thaw stability analysis. Light microscopy showed that the blend structure was coarse at pH conditions close to the isoelectric point of protein and became finer with increasing pH. Frequency sweep demonstrated that the blend was more liquid-like with relatively lower storage (G') and loss (G'') moduli as the pH was increased from pH 4 to pH 9. Flow analysis revealed that thixotropy behavior was evident in samples treated at pHs 4 and 5, whereas antithixotropy was shown by those adjusted to pHs 6, 7, 8, and 9. The CBMP-MWCS blends were found to show better freeze-thaw stability at pH 8 that could be attributed to the formation of a highly interactive network structure of CBMP and MWCS.

Matched MeSH terms: Drug Stability
Modeling the relationship between the main emulsion components and stability, viscosity, fluid behavior, zeta-potential, and electrophoretic mobility of orange beverage emulsion using response surface methodology

Mirhosseini H, Tan CP, Hamid NS, Yusof S

J Agric Food Chem, 2007 Sep 19;55(19):7659-66.
PMID: 17708646

The possible relationships between the main emulsion components (namely, Arabic gum, xanthan gum, and orange oil) and the physicochemical properties of orange beverage emulsion were evaluated by using response surface methodology. The physicochemical emulsion property variables considered as response variables were emulsion stability, viscosity, fluid behavior, zeta-potential, and electrophoretic mobility. The independent variables had the most and least significant ( p < 0.05) effect on viscosity and zeta-potential, respectively. The quadratic effect of orange oil and Arabic gum, the interaction effect of Arabic gum and xanthan gum, and the main effect of Arabic gum were the most significant ( p < 0.05) effects on turbidity loss rate, viscosity, viscosity ratio, and mobility, respectively. The main effect of Arabic gum was found to be significant ( p < 0.05) in all response variables except for turbidity loss rate. The nonlinear regression equations were significantly ( p < 0.05) fitted for all response variables with high R (2) values (>0.86), which had no indication of lack of fit. The results indicated that a combined level of 10.78% (w/w) Arabic gum, 0.56% (w/w) xanthan gum, and 15.27% (w/w) orange oil was predicted to provide the overall optimum region in terms of physicochemical properties studied. No significant ( p > 0.05) difference between the experimental and the predicted values confirmed the adequacy of response surface equations.

Matched MeSH terms: Drug Stability
Haruan (Channa striatus) incorporated palm-oil creams : formulation and stability studies

Sheikh KA, Baie SH, Khan GM

Pak J Pharm Sci, 2005 Jan;18(1):1-5.
PMID: 16431376

Topical emulsions stabilized with non-ionic emulsifiers have been an attractive alternative as vehicles for drug delivery, particularly for the patients suffering from dermatological problems. Haruan (a natural wound healer) creams were formulated with different types of emulsifiers (Tween 80 and Span 80) using different grades of Malaysian Palm-oleins (DFPL 56, 60, 62 and 65). The stability (at room temperature and accelerated stability testing) of the various creams was evaluated at different temperatures (5, 25 and 45 degrees C) for a period of 6 months by measuring changes in droplet size, viscosity and percentage oil separation. The emulsifier type and concentration showed pronounced effect on the physicochemical properties of the cream, whereas storage time did not. This study suggested that the choice of emulsifiers and concentration of haruan extract are the most important factors in the stability of the haruan creams.

Matched MeSH terms: Drug Stability
Fulltext Formulation optimization of a palm-based nanoemulsion system containing levodopa

Zainol S, Basri M, Basri HB, Shamsuddin AF, Abdul-Gani SS, Karjiban RA, et al.

Int J Mol Sci, 2012;13(10):13049-64.
PMID: 23202937 DOI: 10.3390/ijms131013049

Response surface methodology (RSM) was utilized to investigate the influence of the main emulsion composition; mixture of palm and medium-chain triglyceride (MCT) oil (6%-12% w/w), lecithin (1%-3% w/w), and Cremophor EL (0.5%-1.5% w/w) as well as the preparation method; addition rate (2-20 mL/min), on the physicochemical properties of palm-based nanoemulsions. The response variables were the three main emulsion properties; particle size, zeta potential and polydispersity index. Optimization of the four independent variables was carried out to obtain an optimum level palm-based nanoemulsion with desirable characteristics. The response surface analysis showed that the variation in the three responses could be depicted as a quadratic function of the main composition of the emulsion and the preparation method. The experimental data could be fitted sufficiently well into a second-order polynomial model. The optimized formulation was stable for six months at 4 °C.

Matched MeSH terms: Drug Stability
Fulltext The effect of laser repetition rate on the LASiS synthesis of biocompatible silver nanoparticles in aqueous starch solution

Zamiri R, Zakaria A, Ahangar HA, Darroudi M, Zamiri G, Rizwan Z, et al.

Int J Nanomedicine, 2013;8:233-44.
PMID: 23345971 DOI: 10.2147/IJN.S36036

Laser ablation-based nanoparticle synthesis in solution is rapidly becoming popular, particularly for potential biomedical and life science applications. This method promises one pot synthesis and concomitant bio-functionalization, is devoid of toxic chemicals, does not require complicated apparatus, can be combined with natural stabilizers, is directly biocompatible, and has high particle size uniformity. Size control and reduction is generally determined by the laser settings; that the size and size distribution scales with laser fluence is well described. Conversely, the effect of the laser repetition rate on the final nanoparticle product in laser ablation is less well-documented, especially in the presence of stabilizers. Here, the influence of the laser repetition rate during laser ablation synthesis of silver nanoparticles in the presence of starch as a stabilizer was investigated. The increment of the repetition rate does not negatively influence the ablation efficiency, but rather shows increased productivity, causes a red-shift in the plasmon resonance peak of the silver-starch nanoparticles, an increase in mean particle size and size distribution, and a distinct lack of agglomerate formation. Optimal results were achieved at 10 Hz repetition rate, with a mean particle size of ~10 nm and a bandwidth of ~6 nm 'full width at half maximum' (FWHM). Stability measurements showed no significant changes in mean particle size or agglomeration or even flocculation. However, zeta potential measurements showed that optimal double layer charge is achieved at 30 Hz. Consequently, Ag-NP synthesis via the laser ablation synthesis in solution (LASiS) method in starch solution seems to be a trade-off between small size and narrow size distributions and inherent and long-term stability.

Matched MeSH terms: Drug Stability
Fulltext Effects of selected polysorbate and sucrose ester emulsifiers on the physicochemical properties of astaxanthin nanodispersions

Anarjan N, Tan CP

Molecules, 2013 Jan 09;18(1):768-77.
PMID: 23303336 DOI: 10.3390/molecules18010768

The effects of selected nonionic emulsifiers on the physicochemical characteristics of astaxanthin nanodispersions produced by an emulsification/evaporation technique were studied. The emulsifiers used were polysorbates (Polysorbate 20, Polysorbate 40, Polysorbate 60 and Polysorbate 80) and sucrose esters of fatty acids (sucrose laurate, palmitate, stearate and oleate). The mean particle diameters of the nanodispersions ranged from 70 nm to 150 nm, depending on the emulsifier used. In the prepared nanodispersions, the astaxanthin particle diameter decreased with increasing emulsifier hydrophilicity and decreasing carbon number of the fatty acid in the emulsifier structure. Astaxanthin nanodispersions with the smallest particle diameters were produced with Polysorbate 20 and sucrose laurate among the polysorbates and the sucrose esters, respectively. We also found that the Polysorbate 80- and sucrose oleate-stabilized nanodispersions had the highest astaxanthin losses (i.e., the lowest astaxanthin contents in the final products) among the nanodispersions. This work demonstrated the importance of emulsifier type in determining the physicochemical characteristics of astaxanthin nano-dispersions.

Matched MeSH terms: Drug Stability
Preparation, characterization, and in vitro release studies of insulin-loaded double-walled poly(lactide-co-glycolide) microspheres

Ansary RH, Rahman MM, Awang MB, Katas H, Hadi H, Doolaanea AA

Drug Deliv Transl Res, 2016 06;6(3):308-18.
PMID: 26817478 DOI: 10.1007/s13346-016-0278-y

The purpose of this study was to fabricate insulin-loaded double-walled and single-polymer poly(lactide-co-glycolide) (PLGA) microspheres using a fast degrading glucose core, hydroxyl-terminated poly(lactide-co-glycolide) (Glu-PLGA), and a moderate degrading carboxyl-terminated PLGA polymers. A modified water-in-oil-in-oil-in-water (w/o/o/w) emulsion solvent evaporation technique was employed to prepare double-walled microspheres, whereas single-polymer microspheres were fabricated by a conventional water-in-oil-in-water (w/o/w) emulsion solvent evaporation method. The effect of fabrication techniques and polymer characteristics on microspheres size, morphology, encapsulation efficiency, in vitro release, and insulin stability was evaluated. The prepared double-walled microspheres were essentially non-porous, smooth surfaced, and spherical in shape, whereas single-polymer microspheres were highly porous. Double-walled microspheres exhibited a significantly reduced initial burst followed by sustained and almost complete release of insulin compared to single-polymer microspheres. Initial burst release was further suppressed from double-walled microspheres when the mass ratio of the component polymers was increased. In conclusion, double-walled microspheres made of Glu-PLGA and PLGA can be a potential delivery system of therapeutic insulin.

Matched MeSH terms: Drug Stability
A suitable method to detect potential fraud of bringing Malayan box turtle (Cuora amboinensis) meat into the food chain

Ali ME, Asing, Hamid SB, Razzak MA, Rashid NR, Al Amin M, et al.

Food Addit Contam Part A Chem Anal Control Expo Risk Assess, 2015;32(8):1223-33.
PMID: 26062948 DOI: 10.1080/19440049.2015.1058535

Malayan box turtle (Cuora amboinensis) has been a wildlife-protected vulnerable turtle species in Malaysia since 2005. However, because of its purported usage in traditional medicine, tonic foods and feeds, clandestine black market trade is rampant. Several polymerase chain reaction (PCR) assays for the taxonomic detection and classification of turtle species have been proposed. These assays are based on long-length target amplicons which are assumed to break down under compromised states and, hence, might not be suitable for the forensic tracing and tracking of turtle trafficking. For the first time this paper develops a very short-amplicon-length PCR assay (120 bp) for the detection of Malayan box turtle meat in raw, processed and mixed matrices, and experimental evidence is produced that such an assay is not only more stable and reliable but also more sensitive than those previously published. We checked the assay specificity against 20 different species and no cross-species detection was observed. The possibility of any false-negative detection was eliminated by a universal endogenous control for eukaryotes. The assay detection limit was 0.0001 ng of box turtle DNA from pure meat and 0.01% turtle meat in binary and ternary admixtures and commercial meatballs. Superior target stability and sensitivity under extreme treatments of boiling, autoclaving and microwave cooking suggested that this newly developed assay would be suitable for any forensic and/or archaeological identification of Malayan box turtle species, even in severely degraded specimens. Further, in silico studies indicated that the assay has the potential to be used as a universal probe for the detection of nine Cuora species, all of which are critically endangered.

Matched MeSH terms: Drug Stability
Formulation and optimization of orally disintegrating tablets of sumatriptan succinate

Sheshala R, Khan N, Darwis Y

Chem Pharm Bull (Tokyo), 2011;59(8):920-8.
PMID: 21804234

The aims of the present research were to mask the intensely bitter taste of sumatriptan succinate and to formulate orally disintegrating tablets (ODTs) of the taste masked drug. Taste masking was performed by coating sumatriptan succinate with Eudragit EPO using spray drying technique. The resultant microspheres were evaluated for thermal analysis, yield, particle size, entrapment efficiency and in vitro taste masking. The tablets were formulated by mixing the taste masked microspheres with different types and concentrations of superdisintegrants and compressed using direct compression method followed by sublimation technique. The prepared tablets were evaluated for weight variation, thickness, hardness, friability, drug content, water content, in vitro disintegration time and in vitro drug release. All the tablet formulations disintegrated in vitro within 37-410 s. The optimized formulation containing 5% Kollidon CL-SF released more than 90% of the drug within 15 min and the release was comparable to that of commercial product (Suminat®). In human volunteers, the optimized formulation was found to have a pleasant taste and mouth feel and disintegrated in the oral cavity within 41 s. The optimized formulation was found to be stable and bioequivalent with Suminat®.

Matched MeSH terms: Drug Stability
Fulltext Assessment of residual bio-efficacy and persistence of Ipomoea cairica plant extract against Culex quinquefasciatus Say mosquito

Thiagaletchumi M, Zuharah WF, Ahbi Rami R, Fadzly N, Dieng H, Ahmad AH, et al.

Trop Biomed, 2014 Sep;31(3):466-76.
PMID: 25382473 MyJurnal

Specification on residual action of a possible alternative insecticide derived from plant materials is important to determine minimum interval time between applications and the environmental persistence of the biopesticides. The objective of this study is to evaluate crude acethonilic extract of Ipomoea cairica leaves for its residual and persistence effects against Culex quinquefasciatus larvae. Wild strain of Cx. quinquefasciatus larvae were used for the purpose of the study. Two test designs, replenishment of water and without replenishment of water were carried out. For the first design, a total of 10 ml of test solution containing Ip. cairica extracts was replenished daily and replaced with 10 ml of distilled water. For the second design, treatment water was maintained at 1500 ml and only evaporated water was refilled. Larval mortality was recorded at 24 hours post-treatment after each introduction period and trials were terminated when mortality rate falls below 50%. Adult emergences from survived larvae were observed and number of survivals was recorded. For the non-replenishment design, mortality rate significantly reduced to below 50% after 28 days, meanwhile for replenishment of water declined significantly after 21 days (P < 0.05). There was no adult emergence observed up to seven days for non-replenishment and first two days for replenishment of water design. The short period of residual effectiveness of crude acethonilic extract of Ip. cairica leaves with high percentage of larval mortality on the first few days, endorses fewer concerns of having excess residues in the environment which may carry the risk of insecticide resistance and environmental pollution.

Matched MeSH terms: Drug Stability
Single dose pharmacokinetics of oral artemether in healthy Malaysian volunteers

Mordi MN, Mansor SM, Navaratnam V, Wernsdorfer WH

Br J Clin Pharmacol, 1997 Apr;43(4):363-5.
PMID: 9146847

AIMS: To determine the pharmacokinetics of artemether (ARM) and its principal active metabolite, dihydroartemisinin (DHA) in healthy volunteers.
METHODS: Six healthy male Malaysian subjects were given a single oral dose of 200 mg artemether. Blood samples were collected to 72 h. Plasma concentrations of the two compounds were measured simultaneously by reversed-phase h.p.l.c. with electro-chemical detection in the reductive mode.
RESULTS: Mean (+/- s.d.) maximum concentrations of ARM, 310 +/- 153 micrograms l-1, were reached 1.88 +/- 0.21 h after drug intake. The mean elimination half-life was 2.00 +/- 0.59 h, and the mean AUC 671 +/- 271 micrograms l-1 h. The mean Cmax of DHA, 273 +/- 64 micrograms l-1 was observed at 1.92 +/- 0.13 h. The mean AUC of DHA was 753 +/- 233 micrograms h l-1'. ARM and DHA were stable at < or = -20 degrees C for at least 4 months in plasma samples.
CONCLUSIONS: The relatively short half-life of ARM may be one of the factors responsible for the poor radical cure rate of falciparum malaria with regimens employing daily dosing. In view of the rapid loss of DHA in plasma samples held at room temperature (26 degrees C) it is recommended to store them at a temperature of < or = -20 degrees C as early as possible after sample collection.

Matched MeSH terms: Drug Stability
Fulltext Improving Vesicular Integrity and Antioxidant Activity of Novel Mixed Soy Lecithin-Based Liposomes Containing Squalene and Their Stability against UV Light

Toopkanloo SP, Tan TB, Abas F, Azam M, Nehdi IA, Tan CP

Molecules, 2020 Dec 11;25(24).
PMID: 33322600 DOI: 10.3390/molecules25245873

In order to improve the membrane lipophilicity and the affinity towards the environment of lipid bilayers, squalene (SQ) could be conjugated to phospholipids in the formation of liposomes. The effect of membrane composition and concentrations on the degradation of liposomes prepared via the extrusion method was investigated. Liposomes were prepared using a mixture of SQ, cholesterol (CH) and Tween80 (TW80). Based on the optimal conditions, liposome batches were prepared in the absence and presence of SQ. Their physicochemical and stability behavior were evaluated as a function of liposome constituent. From the optimization study, the liposomal formulation containing 5% (w/w) mixed soy lecithin (ML), 0.5% (w/w) SQ, 0.3% (w/w) CH and 0.75% (w/w) TW80 had optimal physicochemical properties and displayed a unilamellar structure. Liposome prepared using the optimal formulation had a low particle size (158.31 ± 2.96 nm) and acceptable %increase in the particle size (15.09% ± 3.76%) and %trolox equivalent antioxidant capacity (%TEAC) loss (35.69% ± 0.72%) against UV light treatment (280-320 nm) for 6 h. The interesting outcome of this research was the association of naturally occurring substance SQ for size reduction without the extra input of energy or mechanical procedures, and improvement of vesicle stability and antioxidant activity of ML-based liposome. This study also demonstrated that the presence of SQ in the membrane might increase the acyl chain dynamics and decrease the viscosity of the dispersion, thereby limiting long-term stability of the liposome.

Matched MeSH terms: Drug Stability
Fulltext Mechanism-based selection of stabilization strategy for amorphous formulations: Insights into crystallization pathways

Edueng K, Mahlin D, Larsson P, Bergström CAS

J Control Release, 2017 06 28;256:193-202.
PMID: 28412224 DOI: 10.1016/j.jconrel.2017.04.015

We developed a step-by-step experimental protocol using differential scanning calorimetry (DSC), dynamic vapour sorption (DVS), polarized light microscopy (PLM) and a small-scale dissolution apparatus (μDISS Profiler) to investigate the mechanism (solid-to-solid or solution-mediated) by which crystallization of amorphous drugs occurs upon dissolution. This protocol then guided how to stabilize the amorphous formulation. Indapamide, metolazone, glibenclamide and glipizide were selected as model drugs and HPMC (Pharmacoat 606) and PVP (K30) as stabilizing polymers. Spray-dried amorphous indapamide, metolazone and glibenclamide crystallized via solution-mediated nucleation while glipizide suffered from solid-to-solid crystallization. The addition of 0.001%-0.01% (w/v) HPMC into the dissolution medium successfully prevented the crystallization of supersaturated solutions of indapamide and metolazone whereas it only reduced the crystallization rate for glibenclamide. Amorphous solid dispersion (ASD) formulation of glipizide and PVP K30, at a ratio of 50:50% (w/w) reduced but did not completely eliminate the solid-to-solid crystallization of glipizide even though the overall dissolution rate was enhanced both in the absence and presence of HPMC. Raman spectroscopy indicated the formation of a glipizide polymorph in the dissolution medium with higher solubility than the stable polymorph. As a complementary technique, molecular dynamics (MD) simulations of indapamide and glibenclamide with HPMC was performed. It was revealed that hydrogen bonding patterns of the two drugs with HPMC differed significantly, suggesting that hydrogen bonding may play a role in the greater stabilizing effect on supersaturation of indapamide, compared to glibenclamide.

Matched MeSH terms: Drug Stability
Synthesis and formulation studies of griseofulvin analogues with improved solubility and metabolic stability

Petersen AB, Andersen NS, Konotop G, Hanafiah NH, Raab MS, Krämer A, et al.

Eur J Med Chem, 2017 Apr 21;130:240-247.
PMID: 28258034 DOI: 10.1016/j.ejmech.2017.02.055

Griseofulvin (1) is an important antifungal agent that has recently received attention due to its antiproliferative activity in mammalian cancer cells. Comprehensive SAR studies have led to the identification of 2'-benzyloxy griseofulvin 2, a more potent analogue with low micromolar anticancer potency in vitro. Analogue 2 was also shown to retard tumor growth through inhibition of centrosomal clustering in murine xenograft models of colon cancer and multiple myeloma. However, similar to griseofulvin, compound 2 exhibited poor metabolic stability and aqueous solubility. In order to improve the poor pharmacokinetic properties, 11 griseofulvin analogues were synthesized and evaluated for biological activity and physiological stabilities including SGF, plasma, and metabolic stability. Finally, the most promising compounds were investigated in respect to thermodynamic solubility and formulation studies. The 2'-benzylamine analogue 10 proved to be the most promising compound with low μM in vitro anticancer potency, a 200-fold increase in PBS solubility over compound 2, and with improved metabolic stability. Furthermore, this analogue proved compatible with formulations suitable for both oral and intravenous administration. Finally, 2'-benzylamine analogue 10 was confirmed to induce G2/M cell cycle arrest in vitro.

Matched MeSH terms: Drug Stability
QbD-Driven Development and Validation of Liquid Chromatography Tandem Mass Spectrometric Method for the Quantitation of Sildenafil in Human Plasma

Hasnain MS, Ansari SA, Rao S, Tabish M, Singh M, Abdullah MS, et al.

J Chromatogr Sci, 2017 Jul 01;55(6):587-594.
PMID: 28335023 DOI: 10.1093/chromsci/bmx010

The present work was employing the Quality by Design approach for the development and validation of a LC-MS-MS method to support the clinical advancement in determination of sildenafil in human plasma using lorazepam as an internal standard. Sample preparation involved solid phase extraction and calibration range observed between 3 and 1,700 ng/mL. The method was systematically optimized by employing Box-Behnken design and used mobile phase flow rate, pH and composition of mobile phase as the critical factors, and assessing the design for retention time and peak area as the responses. A substantial decrease in the variability associated with the method variables was shown in optimization studies and confirmed enhanced method robustness. The present studies revealed that developed method achieves all the regulatory requirements for linearity, accuracy, precision, selectivity, sensitivity and stability for the determination of sildenafil in human plasma. There was not any significant change in the stability of the drug shown by stability studies, performed in human plasma through freeze-thaw cycles, bench-top stability, short-term stability, long-term stability and auto sampler stability. In short, this method shows satisfactory results for the analysis of sildenafil in human plasma and possesses high degree of utility in pharmacokinetic and bioequivalence studies.

Matched MeSH terms: Drug Stability
Cellulose Derivatives Enhanced Stability of Alginate-Based Beads Loaded with Lactobacillus plantarum LAB12 against Low pH, High Temperature and Prolonged Storage

Fareez IM, Lim SM, Zulkefli NAA, Mishra RK, Ramasamy K

Probiotics Antimicrob Proteins, 2018 09;10(3):543-557.
PMID: 28493103 DOI: 10.1007/s12602-017-9284-8

The susceptibility of probiotics to low pH and high temperature has limited their use as nutraceuticals. In this study, enhanced protection of probiotics via microencapsulation was achieved. Lactobacillus plantarum LAB12 were immobilised within polymeric matrix comprised of alginate (Alg) with supplementation of cellulose derivatives (methylcellulose (MC), sodium carboxymethyl cellulose (NaCMC) or hydroxypropyl methylcellulose (HPMC)). L. plantarum LAB12 encapsulated in Alg-HPMC(1.0) and Alg-MC(1.0) elicited improved survivability (91%) in simulated gastric conditions and facilitated maximal release (∼100%) in simulated intestinal condition. Alg-HPMC(1.0) and Alg-MC(1.0) significantly reduced (P 7 log CFU g-1. Alg-MC and Alg-HPMC improved the survival of LAB12 against simulated gastric condition (9.24 and 9.55 log CFU g-1, respectively), temperature up to 90 °C (9.54 and 9.86 log CFU g-1, respectively) and 4-week of storage at 4 °C (8.61 and 9.23 log CFU g-1, respectively) with sustained release of probiotic in intestinal condition (>9 log CFU g-1). These findings strongly suggest the potential of cellulose derivatives supplemented Alg bead as protective micro-transport for probiotic strains. They can be safely incorporated into new functional food or nutraceutical products.

Matched MeSH terms: Drug Stability
Fulltext Optimization of Quercetin loaded Palm Oil Ester Based Nanoemulsion Formulation for Pulmonary Delivery

Arbain NH, Salim N, Wui WT, Basri M, Rahman MBA

J Oleo Sci, 2018 Aug 01;67(8):933-940.
PMID: 30012897 DOI: 10.5650/jos.ess17253

In this research, the palm oil ester (POE)- based nanoemulsion formulation containing quercetin for pulmonary delivery was developed. The nanoemulsion formulation was prepared by high energy emulsification method and then further optimized using D-optimal mixture design. The concentration effects of the mixture of POE:ricinoleic acid (RC), ratio 1:1 (1.50-4.50 wt.%), lecithin (1.50-2.50 wt.%), Tween 80 (0.50-1.00 wt.%), glycerol (1.50-3.00 wt.%), and water (88.0-94.9 wt.%) towards the droplet size were investigated. The results showed that the optimum formulation with 1.50 wt.% POE:RC, 1.50 wt.% lecithin, 1.50 wt.% Tween 80, 1.50 wt.% glycerol and 93.90 % water was obtained. The droplet size, polydispersity index (PDI) and zeta potential of the optimized formulation were 110.3 nm, 0.290 and －37.7 mV, respectively. The formulation also exhibited good stability against storage at 4℃ for 90 days. In vitro aerosols delivery evaluation showed that the aerosols output, aerosols rate and median mass aerodynamic diameter of the optimized nanoemulsion were 99.31%, 0.19 g/min and 4.25 µm, respectively. The characterization of physical properties and efficiency for aerosols delivery results suggest that POE- based nanoemulsion containing quercetin has the potential to be used for pulmonary delivery specifically for lung cancer treatment.

Matched MeSH terms: Drug Stability
Stability indicating HPLC method for simultaneous quantification of sildenafil citrate and dapoxetine hydrochloride in Pharmaceutical products

Liew KB, Peh KK

Pak J Pharm Sci, 2018 Nov;31(6):2515-2522.
PMID: 30473526

A stability-indicating HPLC-UV method for the simultaneous determination of sildenafil citrate and dapoxetine hydrochloride in solution and tablet was developed. The mobile phase was comprised of acetonitrile and 0.2M ammonium acetate buffer. The analyte was eluted at 3.392min and 7.255min for sildenafil citrate and dapoxetine HCl respectively using gradient system at a flow rate of 1.5mL/min. The theoretical plates count was>2000, tailing factor drug solution was stable at ambient room temperature (26˚C) for 48hours.Both drugs were found susceptible to oxidation and the drug content dropped slightly in acid and alkali condition but stable under UV light and heat. No interference from tablet excipients and degradation products was found.

Matched MeSH terms: Drug Stability

Filters

Please provide feedback to Administrator ([email protected])

External Links