Displaying publications 41 - 60 of 75 in total

Abstract:
Sort:
  1. Fulltext Cutting Processes of Natural Fiber-Reinforced Polymer Composites
    Masoud F, Sapuan SM, Mohd Ariffin MKA, Nukman Y, Bayraktar E
    Polymers (Basel), 2020 Jun 11;12(6).
    PMID: 32545334 DOI: 10.3390/polym12061332
    Recently, natural fiber-reinforced polymers (NFRPs) have become important materials in many engineering applications; thus, to employ these materials some final industrial processes are needed, such as cutting, trimming, and drilling. Because of the heterogeneous nature of NFRPs, which differs from homogeneous materials such as metals and polymers, several defects have emerged when processing the NFRPs through traditional cutting methods such as high surface roughness and material damage at cutting zone. In order to overcome these challenges, unconventional cutting methods were considered. Unconventional cutting methods did not take into account the effects of cutting forces, which are the main cause of cutting defects in traditional cutting processes. The most prominent unconventional cutting processes are abrasive waterjet (AWJM) and laser beam (LBM) cutting technologies, which are actually applied for cutting various NFRPs. In this study, previously significant studies on cutting NFRPs by AWJM and LBM are discussed. The surface roughness, kerf taper, and heat-affected zone (HAZ) represent the target output parameters that are influenced and controlled by the input parameters of each process. However, this topic requires further studies on widening the range of material thickness and input parameter values.
  2. Fulltext Development and Characterization of Cornstarch-Based Bioplastics Packaging Film Using a Combination of Different Plasticizers
    Abotbina W, Sapuan SM, Sultan MTH, Alkbir MFM, Ilyas RA
    Polymers (Basel), 2021 Oct 11;13(20).
    PMID: 34685246 DOI: 10.3390/polym13203487
    This work aims to develop cornstarch (CS) based films using fructose (F), glycerol (G), and their combination (FG) as plasticizers with different ratios for food packaging applications. The findings showed that F-plasticized film had the lowest moisture content, highest crystallinity among all films, and exhibited the highest tensile strength and thermostability. In contrast, G-plasticized films showed the lowest density and water absorption with less crystallinity compared to the control and the other plasticized film. In addition, SEM results indicated that FG-plasticized films had a relatively smoother and more coherent surface among the tested films. The findings have also shown that varying the concentration of the plasticizers significantly affected the different properties of the plasticized films. Therefore, the selection of a suitable plasticizer at an appropriate concentration may significantly optimize film properties to promote the utilization of CS films for food packaging applications.
  3. Fulltext Wheat Biocomposite Extraction, Structure, Properties and Characterization: A Review
    Mohammed AABA, Omran AAB, Hasan Z, Ilyas RA, Sapuan SM
    Polymers (Basel), 2021 Oct 21;13(21).
    PMID: 34771181 DOI: 10.3390/polym13213624
    Biocomposite materials create a huge opportunity for a healthy and safe environment by replacing artificial plastic and materials with natural ingredients in a variety of applications. Furniture, construction materials, insulation, and packaging, as well as medical devices, can all benefit from biocomposite materials. Wheat is one of the world's most widely cultivated crops. Due to its mechanical and physical properties, wheat starch, gluten, and fiber are vital in the biopolymer industry. Glycerol as a plasticizer considerably increased the elongation and water vapor permeability of wheat films. Wheat fiber developed mechanical and thermal properties as a result of various matrices; wheat gluten is water insoluble, elastic, non-toxic, and biodegradable, making it useful in biocomposite materials. This study looked at the feasibility of using wheat plant components such as wheat, gluten, and fiber in the biocomposite material industry.
  4. Effect of duration of sonication during gelatinization on properties of tapioca starch water hyacinth fiber biocomposite
    Asrofi M, Abral H, Putra YK, Sapuan SM, Kim HJ
    Int J Biol Macromol, 2018 Mar;108:167-176.
    PMID: 29191420 DOI: 10.1016/j.ijbiomac.2017.11.165
    This paper characterizes properties of biocomposite sonicated during gelatinization. The biocomposite consisted of tapioca starch based plastic reinforced by 10% volume fraction of water hyacinth fiber (WHF). During gelatinization, the biocomposite was poured into a rectangular glass mold then vibrated in an ultrasonic bath using 40kHz, 250W for varying durations (0, 15, 30, and 60min). The resulting biocomposite was then dried in a drying oven at 50°C for 20h. The results of this study indicate that a biocomposite with optimal properties can be produced using tapioca starch and WHF if the gelatinizing mixture is exposed to ultrasound vibration for 30min. After this vibration duration, tensile strength (TS) and tensile modulus (TM) increased 83% and 108%. A further 60min vibration only increased the TS at 13% and TM at 23%. Moisture resistance of the biocomposite after vibration increased by around 25% reaching a maximal level after 30min. Thermal resistance of the vibrated biocomposites was also increased.
  5. Effect of corn husk fibre loading on thermal and biodegradable properties of kenaf/cornhusk fibre reinforced corn starch-based hybrid composites
    Hazrol MD, Sapuan SM, Ilyas RA, Zainudin ES, Zuhri MYM, Abdul NI
    Heliyon, 2023 Apr;9(4):e15153.
    PMID: 37095902 DOI: 10.1016/j.heliyon.2023.e15153
    This paper documents the thermal and biodegradation behaviour of kenaf/cornhusk fiber reinforced corn starch-based hybrid composites film (CS/K-CH) produced by solution casting method. To develop both components as biodegradable hybrid composite, this research used corn starch as matrix, kenaf fiber and cornhusk fibre as a filler. Changes in physical structure and weight from the soil burial test were measured using Mettler Toledo digital balance ME. Films produced from physically blended corn starch reinforced kenaf biocomposites films (CS/K) biocomposite film had faster biodegradation and lost 96.18% of weight within 10 days compared with corn starch hybrid composites that only lost 83.82% of total weight. It was observed that the control film, CS/K biocomposite film was completely degraded after 10 days, meanwhile it took 12 days for hybrid composite films to be fully degrade. The thermal properties such as TGA and DTG were also measured. Addition of corn husk fiber significantly improve the film's thermal properties. Glass transition temperatures of corn starch hybrid films were significantly lowered when cornhusk compositions were increased from 0.2% wt to 0.8% wt. Importantly, the current work has demonstrated that hybrid films made of corn starch can be a suitable biodegradable material for substitute synthetic plastic.
  6. Fulltext Delamination and Manufacturing Defects in Natural Fiber-Reinforced Hybrid Composite: A Review
    Suriani MJ, Rapi HZ, Ilyas RA, Petrů M, Sapuan SM
    Polymers (Basel), 2021 Apr 18;13(8).
    PMID: 33919480 DOI: 10.3390/polym13081323
    In recent years, most boat fabrication companies use 100% synthetic fiber-reinforced composite materials, due to their high performance of mechanical properties. In the new trend of research on the fabrication of boat structure using natural fiber hybrid with kevlar/fiberglass-reinforced composite, the result of tensile, bending, and impact strength showed that glass fiber-reinforced polyester composite gave high strength with increasing glass fiber contents. At some point, realizing the cost of synthetic fiber is getting higher, researchers today have started to use natural fibers that are seen as a more cost-effective option. Natural fibers, however, have some disadvantages, such as high moisture absorption, due to repelling nature; low wettability; low thermal stability; and quality variation, which lead to the degradation of composite properties. In recent times, hybridization is recommended by most researchers as a solution to natural fiber's weaknesses and to reduce the use of synthetic fibers that are not environmentally friendly. In addition, hybrid composite has its own special advantages, i.e., balanced strength and stiffness, reduced weight and cost, improved fatigue resistance and fracture toughness, and improved impact resistance. The synthetic-nature fiber hybrid composites are used in a variety of applications as a modern material that has attracted most manufacturing industries' attention to shift to using the hybrid composite. Some of the previous studies stated that delamination and manufacturing had influenced the performance of the hybrid composites. In order to expand the use of natural fiber as a successful reinforcement in hybrid composite, the factor that affects the manufacturing defects needs to be investigated. In this review paper, a compilation of the reviews on the delamination and a few common manufacturing defect types illustrating the overview of the impact on the mechanical properties encountered by most of the composite manufacturing industries are presented.
  7. Fulltext Flammability, Tensile, and Morphological Properties of Oil Palm Empty Fruit Bunches Fiber/Pet Yarn-Reinforced Epoxy Fire Retardant Hybrid Polymer Composites
    Suriani MJ, Radzi FSM, Ilyas RA, Petrů M, Sapuan SM, Ruzaidi CM
    Polymers (Basel), 2021 Apr 14;13(8).
    PMID: 33920055 DOI: 10.3390/polym13081282
    Oil palm empty fruit bunches (OPEFB) fiber is a natural fiber that possesses many advantages, such as biodegradability, eco-friendly, and renewable nature. The effect of the OPEFB fiber loading reinforced fire retardant epoxy composites on flammability and tensile properties of the polymer biocomposites were investigated. The tests were carried out with four parameters, which were specimen A (constant), specimen B (20% of fiber), specimen C (35% of fiber), and specimen D (50% of fiber). The PET yarn and magnesium hydroxide were used as the reinforcement material and fire retardant agent, respectively. The results were obtained from several tests, which were the horizontal burning test, tensile test, and scanning electron microscopy (SEM). The result for the burning test showed that specimen B exhibited better flammability properties, which had the lowest average burning rate (11.47 mm/min). From the tensile strength, specimen A revealed the highest value of 10.79 N/mm2. For the SEM morphological test, increasing defects on the surface ruptured were observed that resulted in decreased tensile properties of the composites. It can be summarized that the flammability and tensile properties of OPEFB fiber reinforced fire retardant epoxy composites were reduced when the fiber volume contents were increased at the optimal loading of 20%, with the values of 11.47 mm/min and 4.29 KPa, respectively.
  8. Fulltext Potential of Natural Fiber Reinforced Polymer Composites in Sandwich Structures: A Review on Its Mechanical Properties
    Alsubari S, Zuhri MYM, Sapuan SM, Ishak MR, Ilyas RA, Asyraf MRM
    Polymers (Basel), 2021 Jan 28;13(3).
    PMID: 33525703 DOI: 10.3390/polym13030423
    The interest in using natural fiber reinforced composites is now at its highest. Numerous studies have been conducted due to their positive benefits related to environmental issues. Even though they have limitations for some load requirements, this drawback has been countered through fiber treatment and hybridization. Sandwich structure, on the other hand, is a combination of two or more individual components with different properties, which when joined together can result in better performance. Sandwich structures have been used in a wide range of industrial material applications. They are known to be lightweight and good at absorbing energy, providing superior strength and stiffness-to-weight ratios, and offering opportunities, through design integration, to remove some components from the core element. Today, many industries use composite sandwich structures in a range of components. Through good design of the core structure, one can maximize the strength properties, with a low density. However, the application of natural fiber composites in sandwich structures is still minimal. Therefore, this paper reviewed the possibility of using a natural fiber composite in sandwich structure applications. It addressed the mechanical properties and energy-absorbing characteristics of natural fiber-based sandwich structures tested under various compression loads. The results and potential areas of improvement to fit into a wide range of engineering applications were discussed.
  9. Fulltext Thermal Stability, Dynamic Mechanical Analysis and Flammability Properties of Woven Kenaf/Polyester-Reinforced Polylactic Acid Hybrid Laminated Composites
    Azlin MNM, Sapuan SM, Zuhri MYM, Zainudin ES, Ilyas RA
    Polymers (Basel), 2022 Jun 30;14(13).
    PMID: 35808734 DOI: 10.3390/polym14132690
    This paper presents the thermal and flammability properties of woven kenaf/polyester-reinforced polylactic acid hybrid laminated composites. The effects of the fiber content and stacking sequences of hybrid composites were examined. The hybrid composites were fabricated using the hot press method. Thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and flammability properties of woven kenaf/polyester-reinforced polylactic hybrid composites were reported. The thermal results have demonstrated the effect of the hybridization of the composites on the thermal stability and viscoelastic properties of the laminates. The work also measured the burning rate of the hybrid composites during the flammability test. The S7 sample that consisted of all woven kenaf layers in composite recorded the highest char residue of 10%, and the S8 sample displayed the highest decomposition temperature among all samples. However, as for hybrid composites, the S5 sample shows the optimum result with a high char yield and exhibited the lowest burning rate at 29 mm/min. The S5 sample also shows the optimum viscoelastic properties such as storage and loss modulus among hybrid composites.
  10. A review of recent developments in kenaf fiber/polylactic acid composites research
    Khan A, Sapuan SM, Siddiqui VU, Zainudin ES, Zuhri MYM, Harussani MM
    Int J Biol Macromol, 2023 Dec 31;253(Pt 5):127119.
    PMID: 37776930 DOI: 10.1016/j.ijbiomac.2023.127119
    Kenaf fiber has recently garnered exponential interest as reinforcement in composite materials across diverse industries owing to its superior mechanical attributes, ease of manufacture, and inherent biodegradability. In the discourse of this review, various methods of manufacturing kenaf/Polylactic acid (PLA) composites have been discussed meticulously, as delineated in recently published scientific literatures. This paper delves into the chemical modification of kenaf fiber, examining its consequential impact on tensile strength and thermal stability of the kenaf/PLA composites. Further, this review illuminates the role of innovative 3D printing techniques and fiber orientation in augmenting the mechanical robustness of the kenaf/PLA composites. Simultaneously, recent insightful explorations into the acoustic properties of the kenaf/PLA composites, underscoring their potential as sustainable alternative to conventional materials have been reviewed. Serving as a comprehensive repository of knowledge, this review paper holds immense value for researchers aiming to utilize the capabilities of kenaf fiber reinforced PLA composites.
  11. Exploring nanocellulose frontiers: A comprehensive review of its extraction, properties, and pioneering applications in the automotive and biomedical industries
    Yusuf J, Sapuan SM, Ansari MA, Siddiqui VU, Jamal T, Ilyas RA, et al.
    Int J Biol Macromol, 2024 Jan;255:128121.
    PMID: 37984579 DOI: 10.1016/j.ijbiomac.2023.128121
    Material is an inseparable entity for humans to serve different purposes. However, synthetic polymers represent a major category of anthropogenic pollutants with detrimental impacts on natural ecosystems. This escalating environmental issue is characterized by the accumulation of non-biodegradable plastic materials, which pose serious threats to the health of our planet's ecosystem. Cellulose is becoming a focal point for many researchers due to its high availability. It has been used to serve various purposes. Recent scientific advancements have unveiled innovative prospects for the utilization of nanocellulose within the area of advanced science. This comprehensive review investigates deeply into the field of nanocellulose, explaining the methodologies employed in separating nanocellulose from cellulose. It also explains upon two intricately examined applications that emphasize the pivotal role of nanocellulose in nanocomposites. The initial instance pertains to the automotive sector, encompassing cutting-edge applications in electric vehicle (EV) batteries, while the second exemplifies the use of nanocellulose in the field of biomedical applications like otorhinolaryngology, ophthalmology, and wound dressing. This review aims to provide comprehensive information starting from the definitions, identifying the sources of the nanocellulose and its extraction, and ending with the recent applications in the emerging field such as energy storage and biomedical applications.
  12. Fulltext The properties and mechanism of action of plant immunomodulators in regulation of immune response - A narrative review focusing on Curcuma longa L., Panax ginseng C. A. Meyer and Moringa oleifera Lam
    Balasubramaniam M, Sapuan S, Hashim IF, Ismail NI, Yaakop AS, Kamaruzaman NA, et al.
    Heliyon, 2024 Apr 15;10(7):e28261.
    PMID: 38586374 DOI: 10.1016/j.heliyon.2024.e28261
    Herbal treatments have been utilized for millennia to cure a variety of ailments. There are over 20, 000 herbal remedies available to treat cancer and other disease in humans. In Ayurveda, traditional plants having revitalizing and nourishing characteristics are known as "Rasayanas." They have anti-inflammatory, anticancer, anti-microbicidal, antiviral, and immunomodulatory effects on the immune system. Immunomodulation is a mechanism through which the body stimulates, suppresses, or boosts the immune system to maintain homeostasis. Plant-derived immunomodulators are typically phytocompounds, including carbohydrates, phenolics, lipids, alkaloids, terpenoids, organosulfur, and nitrogen-containing chemicals. Immunomodulation activity of phytocompounds from traditional plants is primarily mediated through macrophage activation, phagocytosis stimulation, peritoneal macrophage stimulation, lymphoid cell stimulation, and suppression or enhancement of specific and non-specific cellular immune systems via numerous signalling pathways. Despite extensive research, the precise mechanism of immunomodulation of most traditional plants has not yet been fully elucidated, justifying the need for further experimentation. Therefore, this review describes the immunomodulatory agents from traditional plants such as Curcuma longa L., Panax ginseng C.A. Meyer, and Moringa oleifera Lam, further highlighting the common molecular targets and immunomodulatory mechanism involved in eradicating diseases.
  13. An examination of recent research of water absorption behavior of natural fiber reinforced polylactic acid (PLA) composites: A review
    Azka MA, Sapuan SM, Abral H, Zainudin ES, Aziz FA
    Int J Biol Macromol, 2024 Apr 25;268(Pt 1):131845.
    PMID: 38677695 DOI: 10.1016/j.ijbiomac.2024.131845
    Researchers have begun focusing on developing biodegradable materials, such as natural fiber/polymer composites (NFPC), since the growing of environmental concerns related to waste management. One crucial aspect that must be established in the development of these composites is their water-absorption behavior. This paper examines the water absorption (WA) behavior of NFPC, with a specific emphasis on natural fiber/polylactic acid (PLA) composites. It discusses processes and numerous aspects related to this behavior, based on recent published research. This review analyzes the influence of several factors, such as the loading of natural fiber, the combination of different natural fibers, the methods used in manufacturing, and the temperature of the water, on the WA behavior of natural fiber/PLA composites. It also explores how WA affects the properties of these composites. In addition, this review also presented techniques for improving the WA resistance of the composites. This review paper provides researchers with insights into the WA behavior of the composites, aiming to facilitate the development of a versatile and eco-friendly material that may effectively address waste disposal challenges.
  14. Nanocellulose-graphene hybrid composites: Fabrication, characterization, applications and environmental impact
    Yusuf J, Firdaus AHM, Sapuan SM, Rashid U, Ilyas RA, Hassan MR, et al.
    Int J Biol Macromol, 2024 Nov 04.
    PMID: 39505165 DOI: 10.1016/j.ijbiomac.2024.137244
    Nanocellulose-graphene hybrid composites for high-performance uses have been the focus of recent research. In contrast to graphene, which has great conductivity and mechanical strength, nanocellulose possesses special qualities like renewability and biocompatibility but lacks electrical conductivity. Since graphene-nanocellulose has such promising features, efforts to make flexible electronic composites employing them have accelerated. However, the environmental impacts are needed to be addressed prior to the applications of these hybrid composites. This review article explores environmental aspects for nanocellulose-graphene hybrid composites because of their sustainability, which is a major step in the right direction. The article also emphasizes how these composites have the potential to transform several industries and open the door to a more environmentally friendly future. This paper explores into the most recent developments in nanocellulose-graphene hybrid composites, highlighting its environmental benefits and adaptability. These composites offer remarkable performance by combining the strength and conductivity of graphene with the mechanical, electrical, and thermal capabilities of nanocellulose.
  15. Fulltext Coupling Genotyping and Computational Modeling in Prediction of Anti-epileptic Drugs that cause Stevens Johnson Syndrome and Toxic Epidermal Necrolysis for Carrier of HLA-B*15:02
    Teh LK, Selvaraj M, Bannur Z, Ismail MI, Rafia H, Law WC, et al.
    J Pharm Pharm Sci, 2016;19(1):147-60.
    PMID: 27096699 DOI: 10.18433/J38G7X
    PURPOSE: The importance of HLA-B*15:02 genotyping to avoid carbamazepine induced SJS/TEN and molecular modeling to predict the role of HLA-B*15:0 and AEDs induced SJS/TEN are investigated.

    METHODS: DNA was extracted from eighty-six patients. The patients were genotyped by AS-PCR. Computational modeling of the HLA-B*15:02 followed by docking studies were performed to screen 26 AEDs that may induce ADR among HLA-B*15:02 carriers.

    RESULTS: Odd ratio for CBZ induced SJS/TEN and HLA-B*15:02 was 609.0 (95% CI: 23-15873; p=0.0002). Molecular modeling studies showed that acetazolamide, ethosuxiamide, lamotrigine, oxcarbazepine, phenobarbital, phenytoin, primidone and sodium-valproate may induce ADR in HLA-B*15:02 carriers alike CBZ. Conclusion. We confirmed HLA-B*15:02 as a predictor of SJS/TEN and recommend pre-screening. Computational prediction of DIHR is useful in personalized medicine.

  16. Fulltext Mechanical Properties of Longitudinal Basalt/Woven-Glass-Fiber-reinforced Unsaturated Polyester-Resin Hybrid Composites
    Sapuan SM, Aulia HS, Ilyas RA, Atiqah A, Dele-Afolabi TT, Nurazzi MN, et al.
    Polymers (Basel), 2020 Sep 27;12(10).
    PMID: 32992450 DOI: 10.3390/polym12102211
    This work represents a study to investigate the mechanical properties of longitudinal basalt/woven-glass-fiber-reinforced unsaturated polyester-resin hybrid composites. The hybridization of basalt and glass fiber enhanced the mechanical properties of hybrid composites. The unsaturated polyester resin (UP), basalt (B) and glass fibers (GF) were fabricated using the hand lay-up method in six formulations (UP, GF, B7.5/G22.5, B15/G15, B22.5/G7.5 and B) to produce the composites, respectively. This study showed that the addition of basalt to glass-fiber-reinforced unsaturated polyester resin increased its density, tensile and flexural properties. The tensile strength of the B22.5/G7.5 hybrid composites increased by 213.92 MPa compared to neat UP, which was 8.14 MPa. Scanning electron microscopy analysis was used to observe the fracture mode and fiber pullout of the hybrid composites.
  17. A Comprehensive Review on Advanced Sustainable Woven Natural Fibre Polymer Composites
    Aisyah HA, Paridah MT, Sapuan SM, Ilyas RA, Khalina A, Nurazzi NM, et al.
    Polymers (Basel), 2021 Feb 02;13(3).
    PMID: 33540731 DOI: 10.3390/polym13030471
    Over the last decade, the progressive application of natural fibres in polymer composites has had a major effect in alleviating environmental impacts. Recently, there is a growing interest in the development of green materials in a woven form by utilising natural fibres from lignocellulosic materials for many applications such as structural, non-structural composites, household utilities, automobile parts, aerospace components, flooring, and ballistic materials. Woven materials are one of the most promising materials for substituting or hybridising with synthetic polymeric materials in the production of natural fibre polymer composites (NFPCs). These woven materials are flexible, able to be tailored to the specific needs and have better mechanical properties due to their weaving structures. Seeing that the potential advantages of woven materials in the fabrication of NFPC, this paper presents a detailed review of studies related to woven materials. A variety of factors that influence the properties of the resultant woven NFRC such as yarn characteristics, fabric properties as well as manufacturing parameters were discussed. Past and current research efforts on the development of woven NFPCs from various polymer matrices including polypropylene, polylactic acid, epoxy and polyester and the properties of the resultant composites were also compiled. Last but not least, the applications, challenges, and prospects in the field also were highlighted.
  18. Fulltext Mercerization Optimization of Bamboo (Bambusa vulgaris) Fiber-Reinforced Epoxy Composite Structures Using a Box-Behnken Design
    Hassan MZ, Roslan SA, Sapuan SM, Rasid ZA, Mohd Nor AF, Md Daud MY, et al.
    Polymers (Basel), 2020 Jun 17;12(6).
    PMID: 32560539 DOI: 10.3390/polym12061367
    The objective of this research is to optimize the alkaline treatment variables, including sodium hydroxide (NaOH) concentration, soaking, and drying time, that influence the mechanical behavior of bamboo fiber-reinforced epoxy composites. In this study, a Box-Behnken design (BBD) of the response surface methodology (RSM) was employed to design an experiment to investigate the mercerization effect of bamboo fiber-reinforced epoxy composites. The evaluation of predicted tensile strength as a variable parameter of bamboo fiber (Bambusa vulgaris) reinforced epoxy composite structures was determined using analysis of variance (ANOVA) of the quadratic model. In this study, a total of 17 experiment runs were measured and a significant regression for the coefficient between the variables was obtained. Further, the triangular and square core structures made of treated and untreated bamboo fiber-reinforced epoxy composites were tested under compressive loading. It was found that the optimum mercerization condition lies at 5.81 wt.% of the NaOH, after a soaking time of 3.99 h and a drying time of 72 h. This optimum alkaline treatment once again had a great effect on the structures whereby all the treated composite cores with square and triangular structures impressively outperformed the untreated bamboo structures. The treated triangular core of bamboo reinforced composites gave an outstanding performance compared to the treated and untreated square core composite structures for compressive loading and specific energy absorbing capability.
  19. Dynamic Mechanical Properties and Thermal Properties of Longitudinal Basalt/Woven Glass Fiber Reinforced Unsaturated Polyester Hybrid Composites
    Haris NIN, Ilyas RA, Hassan MZ, Sapuan SM, Afdzaluddin A, Jamaludin KR, et al.
    Polymers (Basel), 2021 Sep 29;13(19).
    PMID: 34641159 DOI: 10.3390/polym13193343
    This study investigates the mechanical, thermal, and chemical properties of basalt/woven glass fiber reinforced polymer (BGRP) hybrid polyester composites. The Fourier transform infrared spectroscopy (FTIR) was used to explore the chemical aspect, whereas the dynamic mechanical analysis (DMA) and thermomechanical analysis (TMA) were performed to determine the mechanical and thermal properties. The dynamic mechanical properties were evaluated in terms of the storage modulus, loss modulus, and damping factor. The FTIR results showed that incorporating single and hybrid fibers in the matrix did not change the chemical properties. The DMA findings revealed that the B7.5/G22.5 composite with 7.5 wt% of basalt fiber (B) and 22.5 wt% of glass fiber (G) exhibited the highest elastic and viscous properties, as it exhibited the higher storage modulus (8.04 × 109 MPa) and loss modulus (1.32 × 109 MPa) compared to the other samples. All the reinforced composites had better damping behavior than the neat matrix, but no further enhancement was obtained upon hybridization. The analysis also revealed that the B22.5/G7.5 composite with 22.5 wt% of basalt fiber and 7.5 wt% of glass fiber had the highest Tg at 70.80 °C, and increased by 15 °C compared to the neat matrix. TMA data suggested that the reinforced composites had relatively low dimensional stabilities than the neat matrix, particularly between 50 to 80 °C. Overall, the hybridization of basalt and glass fibers in unsaturated polyester formed composites with higher mechanical and thermal properties than single reinforced composites.
  20. Fulltext Compression Behaviour of Bio-Inspired Honeycomb Reinforced Starfish Shape Structures Using 3D Printing Technology
    Saufi SASA, Zuhri MYM, Dezaki ML, Sapuan SM, Ilyas RA, As'arry A, et al.
    Polymers (Basel), 2021 Dec 14;13(24).
    PMID: 34960939 DOI: 10.3390/polym13244388
    The bio-inspired structure (e.g., honeycomb) has been studied for its ability to absorb energy and its high strength. The cell size and wall thickness are the main elements that alter the structural ability to withstand load and pressure. Moreover, adding a secondary structure can increase the compressive strength and energy absorption (EA) capability. In this study, the bio-inspired structures are fabricated by fused deposition modelling (FDM) technology using polylactic acid (PLA) material. Samples are printed in the shape of a honeycomb structure, and a starfish shape is used as its reinforcement. Hence, this study focuses on the compression strength and EA of different cell sizes of 20 and 30 mm with different wall thicknesses ranging from 1.5 to 2.5 mm. Subsequently, the deformation and failure of the structures are determined under the compression loading. It is found that the smaller cell size with smaller wall thickness offered a crush efficiency of 69% as compared to their larger cell size with thicker wall thickness counterparts. It is observed that for a 20 mm cell size, the EA and maximum peak load increase, respectively, when the wall thickness increases. It can be concluded that the compression strength and EA capability increase gradually as the cell size and wall thickness increase.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links