Honey is a popular natural food product with a very complex composition mainly consisting of both organic and inorganic constituents. The composition of honey is strongly influenced by both natural and anthropogenic factors, which vary based on its botanical and geographical origins. Although minerals and heavy metals are minor constituents of honey, they play vital role in determining its quality. There are several different analytical methods used to determine the chemical elements in honey. These methods are typically based on spectroscopy or spectrometry techniques (including atomic absorption spectrometry, atomic emission spectrometry, inductively coupled plasma mass spectrometry, and inductively coupled plasma optical emission spectrometry). This review compiles available scientific information on minerals and heavy metals in honey reported from all over the world. To date, 54 chemical elements in various types of honey have been identified and can be divided into 3 groups: major or macroelements (Na, K, Ca, Mg, P, S, Cl), minor or trace elements (Al, Cu, Pb, Zn, Mn, Cd, Tl, Co, Ni, Rb, Ba, Be, Bi, U, V, Fe, Pt, Pd, Te, Hf, Mo, Sn, Sb, La, I, Sm, Tb, Dy, Sd, Th, Pr, Nd, Tm, Yb, Lu, Gd, Ho, Er, Ce, Cr, As, B, Br, Cd, Hg, Se, Sr), and heavy metals (trace elements that have a specific gravity at least 5 times higher than that of water and inorganic sources). Chemical elements in honey samples throughout the world vary in terms of concentrations and are also influenced by environmental pollution.
Introduction: The spread of multidrug-resistant malaria parasite – Plasmodium sp. to commercially available antimalarial drugs, i.e. artemisinin-based combination therapies (ACTs) and chloroquine (CQ), has become a global treat to eliminate malaria. To limit the impact of antimalarial drug resistance, a new potent and affordable alternative is urgently needed. A number of metal-based compounds (metallodrugs) have been found active against Plasmodium falciparum, the species that causes potentially fatal cerebral malaria, as they are ease in ligand grafting of multi-functional groups. Ferroquine (FQ) is one of the metalloantimalarial drugs that is currently undergoing clinical trials. Methods: In this study, a series of ternary copper(II) and zinc(II) complexes – Cu(phen)(edda) 1, Zn(phen)(edda) 2, [Cu(phen)(cdmg)] NO3 3 and [Zn(phen)(c-dmg)]NO3 4 were synthesized and characterized by the following tests: Fourier transformed infrared (FTIR), CHN elemental analysis, UV-Vis spectroscopy, molar conductivity and magnetic susceptibility measurements. Results: In vitro hemolytic and antimalarial assays using SYBR Green I dye were done to determine the biological properties of these complexes. Preliminary biological evaluation demonstrated that all the complexes 1, 2, 3 and 4 exhibit toxicity against the sensitive blood-stage Plasmodium falciparum 3D7 with IC50 in μM range. Conclusion: Thus, metal complex is a potentially viable candidate as antimalarial drug to overcome the emergence of drug resistance.
The importance of vitamin A and Zinc has been a major concern due to their deficiency among children. This research aimed to investigate the association of vitamin A and zinc intake with visual acuity among Orang Asli children in Semenyih, Selangor. The total subjects involved were 94, consisting of boys, and girls aged 8-12 years old. A food frequency questionnaire (FFQ) was used to determine the level of vitamin A and zinc intake. A Bailey-lovie chart test was used to determine the visual acuity. Vitamin A intake was highest among boys aged 8-9 years old (720 ± 324 mg). The mean intake of zinc, was lowest among boys aged 10-12 years old (4.42 ± 1.00 mg) and highest among girls aged 8-9 years old (5.04 ± 1.14 mg). The prevalence of abnormal visual acuity was 24%, which was equivalent to 23 subjects from the overall sample, consisting of boys and girls with a value of 0.50 Dioptric spherical equivalence (DSE). Findings from the research show that vitamin A and Zinc intake have a significant association with Visual acuity (p
Introduction: This study aims to quantify the concentrations of Cu, Cr, Zn, Ni, Pb, As and Cd in paddy soil and water and assess their potential dermal health risk to the farmers at Kampung Sawah Sempadan, Malaysia. Methods: 72 water samples and 72 soil samples were collected and analysed using inductively coupled plasma mass spectrometry (ICP-MS). 117 respondents were interviewed using a questionnaire to obtain the exposure information for dermal health risk assessments. Results: All elements in water did not exceed the recommended concentration by Malaysia National Water Quality Standard (NWQS) and Food and Agriculture Organization (FAO). Nevertheless, the maxi- mum concentration of As (31.49 mg/kg) in paddy soil exceeded the Dutch Target Value for soil protection (29 mg/ kg). There was no significant chronic non-carcinogenic health risk for farmers working in the paddy soil and water (HQ
Chitosan (CS)-dextran (DN) biopolymer electrolytes doped with ammonium iodide (NH4I) and plasticized with glycerol (GL), then dispersed with Zn(II)-metal complex were fabricated for energy device application. The CS:DN:NH4I:Zn(II)-complex was plasticized with various amounts of GL and the impact of used metal complex and GL on the properties of the formed electrolyte were investigated.The electrochemical impedance spectroscopy (EIS) measurements have shown that the highest conductivity for the plasticized system was 3.44 × 10-4 S/cm. From the x-ray diffraction (XRD) measurements, the plasticized electrolyte with minimum degree of crystallinity has shown the maximum conductivity. The effect of (GL) plasticizer on the film morphology was studied using FESEM. It has been confirmed via transference number analysis (TNM) that the transport mechanism in the prepared electrolyte is predominantly ionic in nature with a high transference number of ion (ti)of 0.983. From a linear sweep voltammetry (LSV) study, the electrolyte was found to be electrochemically constant as the voltage sweeps linearly up to 1.25 V. The cyclic voltammetry (CV) curve covered most of the area of the current-potential plot with no redox peaks and the sweep rate was found to be affecting the capacitance. The electric double-layer capacitor (EDLC) has shown a great performance of specific capacitance (108.3 F/g), ESR(47.8 ohm), energy density (12.2 W/kg) and power density (1743.4 W/kg) for complete 100 cycles at a current density of 0.5 mA cm-2.
Coal combustion by-products (CCPs) (i.e. fly (FA) and bottom (BA) ashes) generated by power plants contain heavy metals. This research presents leaching properties of coal ashes (FA and BA) collected from Jimah coal-fired power station, Port Dickson, Negeri Sembilan using USEPA standard methods namely toxicity characteristic leaching procedure (TCLP), and synthetic precipitation leaching procedure (SPLP). Heavy metals like lead (Pb), zinc (Zn), copper (Cu) and arsenic (As) were quantified using atomic absorption spectrometer (AAS). The leached of heavy metals fluxes were Cu < Zn < Pb < As. As leached the most whilst indicating of possible contamination from As. Overall, the ranges of leached concentration were adhered to permissible limits of hazardous waste criteria for metal (Pb and As) and industrial effluent (Zn and Cu). The presented data has potential reuse as reference for the coal ash concrete mixed design application in construction industries.
Semiconductor oxides such as titanium dioxide (TiO2) and zinc oxide (ZnO) are used as the photocatalyst for removing contaminants. In addition, TiO2 and ZnO nanoparticles in the suspension form makes it difficult to be recovered and recycled. This study was conducted to investigate the efficiency of immobilizing TiO2 and ZnO nanoparticles in epoxy beads. The immobilization process using different ratios of photocatalysts TiO2/ZnO (1:0, 3:1, 1:1, 1:3 and 0:1) fixed on epoxy material. These epoxy beads were used for dye removal in photocatalysis using methylene blue (MB) solution at a concentration of 10mg/L. Besides, epoxy beads also characterized using scanning electron microscope (SEM), attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy and thermogravimetric analysis (TGA). The results showed that the highly recommended epoxy bead is 3:1 ratio of TiO2/ZnO because it has good performance in dye degradation that proved from reducing concentration of MB to 2.4mg/L (76%). However, TiO2/ZnO characterization of 3:1 by SEM show on the surface the particle are found to be spherical in shape which is relatively high efficiency for the degradation, ATR-FTIR pattern in broad band 4000 cm-1 - 400cm-1 which correspond to hydroxyl stretching to be adsorbed at peak (474.49 cm-1 - 3722.61cm-1) respectively to the optimum for the degradation and TGA rate of change are 5mg to 2.5mg that residue (49.78%) due to decomposition or oxidation from mass loss. These findings are very effective and economical technique to be cost saving and highly efficient photocatalyst.
Mangrove located near urban area is exposed to various industrial discharge including heavy metals. Mangrove soil is capable of accumulating and storing these heavy metals. Heavy metals are toxic and non-biodegradable, so their accumulations affect water quality, while bioaccumulation and bio-assimilation of heavy metals in mangrove organisms negatively impact the food chain. Bacteria-derived biosurfactants are compounds capable of removing heavy metals from soil and sediment. Furthermore, environmentally friendly properties, such as biodegradability and low toxicity, exhibited by biosurfactants make them a suitable replacement for chemical surfactants for remediation efforts. This study was conducted to investigate the lead- (Pb) and zinc- (Zn) removing capability of rhamnolipid (RL), a type of biosurfactant produced by marine bacterium, Pseudomonas aeruginosa UMTKB-5. Rhamnolipid solutions of three different concentrations (25 mg/L, 50 mg/L and 75 mg/L) were added to mangrove soil and incubated for 7 days. The removal of Pb from soils was up to 18.3% using 25 mg/L RL solution, while 50 mg/L RL solution removed 48.3%, and 75 mg/L RL solution removed 75.9% Pb over time. Meanwhile, zinc removal of 25 mg/L RL solution was up to 24.9%, while 50 mg/L removed 16.5%, and 75 mg/L RL removed 30.5% of Zn. The results showed that RL from P. aeruginosa UMTKB-5 could be a potential biomaterial to be used to remediate heavy metals in sediment.
Shaped-controlled ZnO architectures including spherical, rod, rice-like and flower-like were fabricated via a reflux method in which the morphology, crystallinity, functional group and optical properties were tailored under different pH values in the precursor solution. The photoactivities of the prepared ZnO were evaluated under UV irradiation and the findings implied that the flower-like ZnO synthesized at pH 12 displayed superior activities on palm oil mil effluent degradation than those of other structures. The photocatalytic enhancement of flower-like ZnO was ascribed to its unique architecture, good crystallinity and superior optical properties. The flower-like ZnO with excellent photocatalytic performance have been confirmed by formation of hydroxyl radicals using a terephthalic acid-photoluminescence test. There was an optimal photocatalyst amount of 1.0 g/L, at which a maximum chemical oxygen demand removal of palm oil mill effluent was achieved under exposure of UV light. The phytotoxicity experiment via mung beans demonstrated a decrease in phytotoxicity.
Nanostructure materials are of interest in last few decades due to their unique size-dependent physio-chemical properties. In this paper, zinc oxide (ZnO) and barium doped ZnO nanodisks (NDs) were synthesized using sonochemical method and characterized by various techniques such as X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscope (SEM), UV-vis absorption and dielectric measurements. The XRD and FTIR studies confirm the crystalline nature of ZnO NDs, and the average crystallite size was found to be ~25 nm for pure ZnO and ~22 nm for Ba doped ZnO NDs. SEM study confirmed the spherical shaped ZnO NDs with average sizes in the range of 20-30 nm. The maximum absorbance was obtained in the 200-500 nm regions with a prominent peak absorbance were observed by UV-vis spectra. The corresponding band gap for ZnO NDs and Ba doped ZnO NDs were calculated using Tauc's plot and was found to be 3.12 and 3.04, respectively. The conductivity and dielectric measurements as a function of frequency have been studied.
Food consumption of 50 female students in Universiti Kebangsaan Malaysia was recorded for 7 days. Foods and drinks most frequently consumed were selected for analysis of iron, zinc, copper and lead content. The mean daily intakes of energy, protein, carbohydrate and fat among the students are 6.5±1.4 MJ (1550±335 kcal), 59.8±18.5g. 227. 1±54.6 g and 46.0±11.5 g respectively. This diet contributed 19.6±6.4 mg Fe, 7.0±2.0 mg Zn and 1.6±0.6 mg Cu per day which were lower than the Malaysian RDA for Fe and US RDA for Zn, while Cu is within the recommended range. The main sources of these minerals in the student’s diet were rice, rice products, meat and animal products. Lead concentration in the diet (134±77 ug/day) is below the acceptable daily intake (ADI) value suggested by Codex Alimentarius Commission (1984). This study indicated concern regarding the low intake of the essential trace elements on long term basis among the students.
Introduction: Heavy metals and other contaminants in food have been a concern to food industries, consumers and governing authorities. The purpose of this study was to determine the levels of heavy metals and other elements in edible bird nests (EBNs). Methods: Raw and processed (commercial) EBNs were used in the study. Raw EBNs were collected directly from five house farms in Peninsular Malaysia - Kuala Sanglang (Kedah), Pantai Remis (Perak), Kluang Gohor), Kota Bharu (Kelantan) and Kajang (Selangor). Processed EBNs were pmchased from five Chinese traditional medicinal shops located in Peninsular Malaysia. The levels of 32 elements were determined by inductively coupled plasma-mass spectrometry and findings of the study were compared to the maximum regulatory limits set by the Standards and Industrial Research Institute of Malaysia (SIRIM) for EBNs. Results: Of the seven elements with maximum regulatory limits (As, Cd, Pb, Hg, Sn, Cu, Fe), one raw EBN was detected with mercury level of 70.180 ppb which was above the SIRIM permissible limit of 50 ppb. All the EBNs had iron levels above the SIRIM permissible limit of 30 ppb. The levels of the other 25 elements with no maximum regulatory limits (Ca, Mg, Na, K, P, Co, Cr, Mn, Mo, Se, Zn, Ag, Ba, Be, Bi, B, Li, Ni, Sb, Sr, Ti, U, V, Al, Zr) were also determined. Conclusion: The data obtained for the 25 elements with no permissible limits can serve as baseline data for further studies to establish their maximum regulatory limits.
Introduction: This study aimed to determine the nutrient content of cornflakes and muesli, ready-to-eat cereal products available in the Malaysian market. Cornflakes and muesli were chosen due to their popularity as a breakfast meal especially in urban areas. Methods: A total of six brands each for cornflakes and muesli were purchased from supermarkets in the Klang Valley using stratified random sampling. All samples were analysed using AOAC official methods of analysis. The validity of the test data was monitored with the application of internal quality controls in line with the requirements of ISO 17025. Results: Proximate analysis revealed significantly higher mean levels of carbohydrate (86.94 ± 0.59 mg/lOOg), minerals such as iron (8.48±1.72 mg/lOOg) and sodium (674.83±102.99 g/lOOg), B3 as niacinamide (25.87 ± 6.14 g/lOOg) and sucrose (5.10 ± 0.90 mg/lOOg) in cornflakes than in muesli. However, muesli contained significantly more mean moisture (10.23 ± 0.72 mg/lOOg), protein (10.07 ± 0.79 mg/lOOg), total dietary fibre (12.49 ± 1.44 mg/lOOg), magnesium (113.22 ± 7.93 mg/lOOg), zinc (1.65 ± 0.16 mg/lOOg), copper (0.25 ± 0.02 mg/lOOg), total sugar (18.75 ± 2.05 mg/lOOg), glucose (7.70±1.77 mg/lOOg) and fructose (8.68±1.76 mg/lOOg) than cornflakes. Most of the fatty acids analysed were not detected or of low value in both the cereal products. Conclusion: The nutrient analysis of cornflakes and muesli suggests that both ready-to-eat cereals are nutritionally good choice as breakfast for consumers as it provides carbohydrate, minerals, fibre and vitamins. The data provides additional information to the Malaysian Food Composition Database.
Introduction: Malnutrition among cancer patients is associated with a higher risk of
gastrointestinal toxicity which develops during treatment and may affect quality of life (QOL).
Thus, this cross-sectional study aimed to determine the nutritional status and QOL of 30
oncology patients (mean age 50.0+10.7 years) prior to pelvic radiotherapy at Hospital Sultan
Ismail, Johor Bahru.
Methods: Patients were assessed for anthropometry measurements,
24-h diet recall and nutritional status using Scored Patient-Generated Subjective Global
Assessment (PG-SGA) questionnaire while the European Organization for Research and
Treatment of Cancer Care Quality of Life Questionnaire (EORTC QLQ-C30) was used to
assess QOL two weeks prior to the initiation of pelvic radiotherapy.
Results: Mean Body
Mass Index (BMI) of patients was 23.3+3.3kg/m2
and 33% of patients experienced weight
loss prior to pelvic radiotherapy. The PG-SGA rating indicated that 63% of patients were at
Stage A (well-nourished) and 37% were in Stage B (moderate malnutrition). The PG-SGA
numerical score was a significant predictor of QOL, after adjusting for socio-demographic
factors (R2
=0.861, p
The hepatitis C virus (HCV) consists of eight genotypes and 90 subtypes, with genotype (GT) 3 being the second most common globally and is linked to higher incidences of steatosis and rapid development of fibrosis and cirrhosis. The NS3/4A serine protease, a heterodimer complex of two HCV non-structural proteins, is an effective target for pharmaceutical intervention due to its essential roles in processing HCV polyproteins and inhibiting innate immunity. This study combines structure-based virtual screening (SBVS) of predefined compound libraries, pharmacokinetic prediction (ADME/T) and in vitro evaluation to identify potential low molecular weight (<500 Dalton) inhibitors of the NS3/4A serine protease (GT3). In silico screening of ZINC and PubChem libraries yielded five selected compounds as potential candidates. Dose-dependent inhibition of the NS3/4A serine protease and HCV replication in HuH-7.5 cells revealed that compound A (PubChem ID No. 16672637) exhibited inhibition towards HCV GT3 with an IC50 of 106.7µM and EC50 of 25.8µM, respectively. Thus, compound A may be developed as a potent, low molecular weight drug against the HCV NS3/4A serine protease of GT3.
Ficus deltoidea leaves were widely used as a tea beverages in Malaysia with no information of its mineral content. Hence the mineral content of two species of Ficus deltoidea leaves were investigated. The dried leaves of F. deltoidea var. angustifolia and F. deltoidea var. deltoidea were acid digested and mineral elements of Na, Mg, K, Ca, Mn, Cr, Fe and Zn were determined using ICP–MS. Magnesium, potassium, sodium, manganese, iron and zinc were found to be present in the leaves of F. deltoidea var. angustifolia and F. deltoidea var. deltoidea. Concentration of magnesium (1934 mg/L), manganese (58.37 mg/L), iron (6.89 mg/L) and zinc (1.77 mg/L) in F. deltoidea var. deltoidea species were significantly (P < 0.05) higher than in F. deltoidea var. angustifolia species with concentration of 317 mg/L, 29.62 mg/L, 4.55 mg/L and 1.26 mg/L for magnesium, manganese, iron and zinc respectively. Meanwhile, concentration of sodium in F. deltoidea var. deltoidea species (3.13 mg/L) was found to be significantly (P < 0.05) lower than the concentration in F. deltoidea var. angustifolia species (9.11 mg/L). The finding showed that the leaves of F. deltoidea var. deltoidea has higher nutritional value than the leaves of F. deltoidea var. angustifolia. Leaves of Ficus deltoidea especially the F. deltoidea var. deltoidea species contain high amount of magnesium, manganese and potassium. Therefore, tea made of this leaves can be served as a good source of minerals for human consumption.
Fractional factorial design was utilized to evaluate the effect of combinations of nitric acid, hydrogen peroxide, hydrochloric acid and water for microwave digestion of fish muscle. Upon digestion, copper, iron and zinc were determined by flame atomic absorption spectroscopy. H2O2 and HCl volumes were found to be the most significant parameters which resulted in good metal recoveries. This is especially so for the effect of HCl on Fe recovery. The results indicated that the combination of 4 mL 65% HNO3, 2 mL 30% H2O2 and 2 mL 30% HCl gave the most satisfactory percentage recovery. There was good agreement between measured and certified values for all metals with respect to the DORM-3 fish protein.
The banana pseudo-stem is not currently utilised in the food industry. The aim of this research was to investigate the chemical and pasting profile of banana pseudo-stem flour (BPF). Wheat flour were substituted with BPF (0, 5, 15 and 30%) and the pasting profile were determined. Results from mineral analysis showed that the levels of sodium (Na), potassium (K), calcium (Ca), magnesium (Mg) and phosphorus (P) were higher than those of iron (Fe), zinc (Zn) and manganese (Mn). The BPF had a 0.04% total titratable acidity (TTA) and a total soluble solid (TSS) of 1.30⁰ Brix with pH 5.41. BPF contained 28.26% total starch, 12.81% resistant starch and a total digestible starch value of 15.45%. An increased substitution level of BPF into wheat flour significantly (p
Fly ash is the finely divided mineral residue resulting from the combustion of coal in electric generating plants. Fly ash consists of inorganic, incombustible matter present in the coal that has been fused during combustion into a glassy, amorphous structure. Fly ash particles are generally spherical in shape and range in size from 2 μm to 10 μm. They consist mostly of silicon dioxide (SiO2), aluminium oxide (Al2O3) and iron oxide (Fe2O3). Fly ash like soil contains trace concentrations of the following heavy metals: nickel, vanadium, cadmium, barium, chromium, copper, molybdenum, zinc and lead. The chemical compositions of the sample have been examined and the fly ash are of ASTM C618 Class F.
Chemical composition of fine (PM2.5) aerosol samples collected for the 5 years period (2001- 2005) using Gent Stacked filter unit sampler at Klang Valley (3 o 10 ’ 30 ’’ N, 101 o 43 ’ 24 ’’ E) were analysed using Neutron Activation Analysis (NAA) and Proton Induced X-ray Emission (PIXE). Results of the study show that the major component of the fine aerosol was black carbon and sulfur with the mass concentration ranged from 4.4 - 6.7µg m -3 and 1.2 - 1.9µg m -3 , respectively. The total fine aerosol mass concentration were in the ranged of 25 - 31µg m -3 with the reconstructed mass was about 50% as relative to the gravimetric mass. Statistical method, factor analysis with varimax approach has been applied to the aerosol composition data for the fingerprint identification. The analysis produces five identified fingerprint represent soil, industry, motor vehicles/biomass burning and Pb and Zn sources. There is also an unidentified source that could be related to unknown industrial activities.