The impact of global warming has received much international attention in recent decades. To meet climate-change mitigation targets, environmental policy instruments have been designed to transform the way goods and services are produced as well as alter consumption patterns. The government of Malaysia is strongly committed to reducing CO2gas emissions as a proportion of GDP by 40% from 2005 levels by the year 2020. This study evaluates the economy-wide impacts of implementing two different types of CO2emission abatement policies in Malaysia using market-based (imposing a carbon tax) and command-and-control mechanism (sectoral emission standards). The policy simulations conducted involve the removal of the subsidy on petroleum products by the government. A carbon emission tax in conjunction with the revenue neutrality assumption is seen to be more effective than a command-and-control policy as it provides a double dividend. This is apparent as changes in consumption patterns lead to welfare enhancements while contributing to reductions in CO2emissions. The simulation results show that the production of renewable energies is stepped up when the imposition of carbon tax and removal of the subsidy is augmented by revenue recycling. This study provides an economy-wide assessment that compares two important tools for assisting environment policy makers evaluate carbon emission abatement initiatives in Malaysia.
The objective of this study was to identify the spatial and temporal variabilities of selected nutrients in the Setiu Wetlands Lagoon (SWL), Malaysia. Water samples were collected quarterly at ten monitoring sites. This study presents results from a 10-year field investigation (2003 to 2010 and 2014 to 2015) of water quality in the SWL. For the spatial pattern, four clusters were identified with hierarchical cluster analysis. Analysis of the temporal trend shows that the high total suspended solid loading in 2010 was due to large-scale land clearing upstream of the SWL. The enrichment of ammonium after 2010 could plausibly be due to land-based aquaculture diffuse discharges. In 2005-2007, expansion of oil palm plantations within the Setiu catchment had doubled the phosphorus concentration in the SWL. The natural and anthropogenic alterations of the lagoon inlets profoundly influenced the spatial distribution patterns of nutrients in the SWL. These results suggest that intense anthropogenic disturbances close to the SWL accounted for the water quality deterioration.
Austenitic stainless steels of grade 304 were exposed to dry (Ar-75%CO2) and wet (Ar-75%CO2-12%H2O) environments at 700oC. This experimental setup involved horizontal tube furnace connected to CO2 gas and water vapour facilities. X-ray diffraction (XRD) technique, variable pressure-scanning electron microscope (VP-SEM) and optical microscope techniques were used to characterize the products of corrosion. The results of XRD showed that the phase of oxide layers consists of Cr2O3 and NiCr2O4 in dry CO2, meanwhile Fe2O3, Cr2O3, Fe0.56Ni0.34, Fe3O4 were identified in wet condition after 50 h. Adding 12%H2O in Ar-75%CO2 leads significantly in weight change occurred at 10 h exposure. However, after 20 h, the weight gain was decreased due to spallation of the oxide scale. The addition of water vapour accelerates the oxidation rate on the steel than that in dry condition. Morphologies and growth kinetics of these oxides vary with reaction condition. The oxidation behaviour at different times of exposure and the effect of water vapour were discussed in correlation with the microstructure of the oxides.
Cement industries globally produced about 2.282 billion ton/year and 25 billion tons of concrete are produced yearly
all over the world, necessary measures are to be taken to reduce energy use along with the prevention of environmental
degradation, depletion of the limited resources and contribute 7% to global warming effects due to the release of carbon
dioxide to the atmosphere. Cement additives quality improver polymer (CAQIP) was developed from synthesized polymer,
waste materials derived from petro-chemical and palm oil waste for production of sustainable cement. Industrial scale
trial in a local cement plants by dosing 0.009%-0.690% CAQIP significant improved productivity, 8.3-27.5% efficiency in
saving, 24.73-86.36% clinkering energy and 7.7-21.57% grinding energy in the production of Ordinary Portland Cement
and sustainable cement. Strength quality improved 7.31-34.8% (2 day) and 3.85-57.58% (28 day). Carbon dioxide and
others toxic gases emission was reduced 21.90-90.0% by replacing clinker with waste material such as fly ash (25-
35%), out-spec clinker (50-100%) and limestone waste (5-25%). The developed CAQIP significant improved productivity,
quality strength, reduced CO2
emission, grinding & clinkering energy and enhanced production of sustainable cement
and concrete in Malaysia.
ntroduction of new weed management strategy for coconut plantation in Malaysia is essential since the current weed control methods are less effective and highly herbicide dependent, thus leading to development of herbicide resistance in weeds as well as environmental and human health concerns. Thus, the present study aimed to evaluate the phytotoxic effects of oil palm frond mulch treated with imazethapyr at a reduced rate on weed emergence and growth. The results of glasshouse experiments have shown that imazethapyr at 12 g a.i. ha-1 in combination with oil palm residues of leaflet (OPL), rachis (OPR) or frond (OPF) at rates of 1.4-1.8 t ha-1 inhibited Eleusine indica emergence and growth by 90-100%, implying that imazethapyr is compatible with oil palm residue mulches. In the field experiment, hand weeding followed by OPF at 3.4 t ha-1 treated with imazethapyr at 24 g a.i. ha-1 have demonstrated excellent control of Mikania micrantha, Asystasia gangetica, Phyllanthus amarus, Panicum sp. and Echinochloa colona by reducing their total dry weight up to 95% at three months after treatment. The present results suggested that the integration of chemical, physical and mechanical methods can provide effective weed control in the coconut plantation for months.
Environmental concerns have significantly influenced the construction industry regarding the identification and use of environmentally sustainable construction materials. In this context, enzymes (organic materials) have been introduced recently for ground improvement projects such as pavements and embankments. The present experimental study was carried out in order to evaluate the compressive strength of a sedimentary residual soil treated with three different types of enzymes, as assessed through a California bearing ratio (CBR) test. Controlled untreated and treated soil samples containing four dosages (the recommended dose and two, five and 10 times the recommended dose) were prepared, sealed and cured for four months. Following the curing period, samples were soaked in water for four days before the CBR tests were administered. These tests showed no improvement in the soil is compressive strength; in other words, samples prepared even at higher dosages did not exhibit any improvement. Nuclear magnetic resonance (NMR) spectroscopy tests were carried out on three enzymes in order to study the functional groups present in them. Furthermore, X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) tests were executed for untreated and treated soil samples to determine if any chemical reaction took place between the soil and the enzymes. Neither of the tests (XRD nor FESEM) revealed any change. In fact, the XRD patterns and FESEM images for untreated and treated soil samples were indistinguishable.
Malaysian economy relies on palm oil industries as a driver for rural development. However, palm oil mill effluent
(POME) that is generated from palm oil processing stages causes major environmental challenges. Before being
released to the environment, POME treatment is crucial to comply with standard discharge limit. Microalgae have
demonstrated excellent potential for phycoremediating POME and capturing CO2
. In this study, local microalgae isolate
such as Chlamydomonas sp. UKM 6 and Chlorella spp. UKM 8 were used for POME treatment in 21 days with different
inoculum sizes (5%, 10% and 15%). In addition, an integrated treatment process was performed by taking the treated
POME supernatant for cultivation of Chorella spp. UKM 2, Chorella sorokiniana UKM 3 and Chlorella vulgaris for CO2
sequestration study. Different CO2
concentrations (5%, 10% and 15%) were used and the experiments were carried
out in 10 days under continuous illumination. The results showed that among two species involves in POME treatment,
Chlamydomonas sp. UKM 6 showed a great potential to remove pollutant such as COD (56%), nitrogen (65%) and
phosphorus (34%). The biomass after POME treatment and CO2
biofixation content high lipid (90 mg lipid/g biomass)
which can be the potential source for biodiesel production. In CO2
sequestration study, C. sorokininana UKM3 able
to takes up to 15% CO2
with CO2
uptake rate of 273 mgL-1d-1. In this study, the integrated system of POME treatment
and CO2
sequestration were feasible using microalgae.
Food waste is a universal problem in many countries. In line with Sustainable Development Goals 7 and 12, it is crucial to identify a cost-effective food waste valorization management framework with the least human health and environmental impacts. However, studies on the synergistic effect of life cycle assessment and mathematical optimization interconnected with human health, environment, and economic are relatively few and far between; hence they cannot provide holistic recommendations to policymakers in developing environmental and economic feasibility of food waste management frameworks. Taking Malaysia as a case study, this study proposes a simple and deterministic model that integrates life cycle assessment and multi-objective mathematical optimization to unpack the health-environment-economic wellbeing nexus in food waste management sector. The model evaluates the life cycle human health, environmental, and economic impacts of five food waste disposal and valorization technologies: open landfill, sanitary landfill, aerated windrow composting, high-temperature drying sterilization, and anaerobic digestion, and identifies the optimal food waste valorization configuration solution in Malaysia. Based on the results modeled by SimaPro 9.0 and General Algebraic Modeling System with augmented ε-constraint, valorization of food waste into electricity via anaerobic digestion is the most favorable option, with 146% and 161% reduction of human health and ecosystems, respectively, as compared with open landfill. If cost is combined as an objective function with human health and ecosystems, high-temperature drying sterilization is the most attractive scenario due to the high livestock feed revenue. Among the 10 Pareto-optimal solutions, 9% sanitary landfill, 3% aerated windrow composting, 30% high-temperature drying sterilization, 30% anaerobic digestion to electricity, and 28% anaerobic digestion to cooking gas, is recommended as future food waste management configuration. The sensitivity results demonstrate that prices of electricity, cooking gas, and livestock feed affect the optimal configuration food waste management system.
OBJECTIVE: Malaysia has a high and rising prevalence of type 2 diabetes (T2D). While environmental (non-genetic) risk factors for the disease are well established, the role of genetic variations and gene-environment interactions remain understudied in this population. This study aimed to estimate the relative contributions of environmental and genetic risk factors to T2D in Malaysia and also to assess evidence for gene-environment interactions that may explain additional risk variation.
STUDY DESIGN: This was a case-control study including 1604 Malays, 1654 Chinese and 1728 Indians from the Malaysian Cohort Project.
METHODS: The proportion of T2D risk variance explained by known genetic and environmental factors was assessed by fitting multivariable logistic regression models and evaluating McFadden's pseudo R(2) and the area under the receiver-operating characteristic curve (AUC). Models with and without the genetic risk score (GRS) were compared using the log likelihood ratio Chi-squared test and AUCs. Multiplicative interaction between genetic and environmental risk factors was assessed via logistic regression within and across ancestral groups. Interactions were assessed for the GRS and its 62 constituent variants.
RESULTS: The models including environmental risk factors only had pseudo R(2) values of 16.5-28.3% and AUC of 0.75-0.83. Incorporating a genetic score aggregating 62 T2D-associated risk variants significantly increased the model fit (likelihood ratio P-value of 2.50 × 10(-4)-4.83 × 10(-12)) and increased the pseudo R(2) by about 1-2% and AUC by 1-3%. None of the gene-environment interactions reached significance after multiple testing adjustment, either for the GRS or individual variants. For individual variants, 33 out of 310 tested associations showed nominal statistical significance with 0.001
This study investigates the engineering performance and CO₂ footprint of mortar mixers by replacing Portland cement with 10%, 20%, 40% and 60% fly ash, a common industrial waste material. Samples of self-compacting mortar (SCM) were prepared with four different water/binder ratios and varying dosages of superplasticizer to give three ranges of workability, i.e., normal, high and self-compacting mortar mix. The engineering performance was assessed in term of compressive strength after designated curing periods for all mixes. CO₂ footprint was the environmental impact indicator of each production stage. The optimum mix obtained was at 10% replacement rate for all mixes. Total production emission reduced by 56% when the fly ash replacement rate increased from 0% to 60% (maximum). This is translated to a reduction of 80% in eco-points (assuming that the energy consumption rate of production with 0% fly ash is at 100%). Such re-utilization is encouraged since it is able to reduce possible soil toxicity due to sulfur leaching by 5% to 27% and landfill area by 15% to 91% on average.
This study had developed a passenger safety perception model specifically for buses taking into consideration the various factors, namely driver characteristics, environmental conditions, and bus characteristics using Bayesian Network. The behaviour of bus driver is observed through the bus motion profile, measured in longitudinal, lateral, and vertical accelerations. The road geometry is recorded using GPS and is computed with the aid of the Google map while the perceived bus safety is rated by the passengers in the bus in real time. A total of 13 variables were derived and used in the model development. The developed Bayesian Network model shows that the type of bus and the experience of the driver on the investigated route could have an influence on passenger's perception of their safety on buses. Road geometry is an indirect influencing factor through the driver's behavior. The findings of this model are useful for the authorities to structure an effective strategy to improve the level of perceived bus safety. A high level of bus safety will definitely boost passenger usage confidence which will subsequently increase ridership.
The basic aim of this work is (1) to review and present practically operational requirements for a sustainability assessment of marine environment, such as describing the monitoring process, research approaches, objectives, guidelines, and indicators and (2) to illustrate how physico-chemical and biological indicators can be practically applied, to assess water and sediment quality in marine and coastal environment. These indicators should meet defined criteria for practical usefulness, e.g. they should be simple to understand and apply to managers and scientists with different educational backgrounds. This review aimed to encapsulate that variability, recognizing that meaningful guidance should be flexible enough to accommodate the widely differing characteristics of marine ecosystems.
One of the innovations introduced toward tackling the heightening of environmental impact is green technology. In the agricultural industry, the implementation of green fertilizer technology (GFT) for the modern development of environmentally friendly technology is a necessity. Within the Malaysian agriculture sector, the GFT application is needed to increase production levels among all crops. One of the essential commodities of all crops has always been paddy, given its status as the staple food among the country's population. Paddy production with the adoption of GFT potentially opens the path toward sustainable development in the industry as well as it also provides the food safety aspect. Moreover, this helps farmers to improve their productivity on paddy production in Malaysia. This paper attempts to evaluate the contributing socio-psychological factors, innovation attributes of environmental factors, and channels of communication to decision-making among farmers in Malaysia on GFT. Furthermore, this research also aims to assess the moderating role of cost between the farmer's behavioral intention and the adoption of GFT. The sampling process followed the stratified sampling technique-overall, 600 survey questionnaires were dispersed and 437 effective responses were received. The structural analysis results obtained have revealed significant positive effect for perceived awareness, attitude, group norm, perceived behavioral control, environmental concern, agro-environmental regulations, relative advantage, compatibility, trialability, and observability, and on farmer's behavioral intention, a significant effect for paddy farmer's behavioral intention in order to adopt of GFT. Further, the interaction effects of cost on the link between farmer's behavioral intention and adoption of GFT are statistically significant. Though, the finding could not back an outcome for the subjective norm, complexity, and mass media on farmer's behavioral intention. Finally, critical outcomes obtained in this research contribute to deepening the thoughtfulness of paddy farmers' adoption of GFT. This study concludes with policy recommendations and future directions of the research.
It is well documented that carbon emissions can be reduced by replacing conventional energy resources with renewable energy resources; thereby, the role of green technology is essential as it protect natural environment. Given that, the United Nations' agenda of "green is clean" may be achievable by adoption of green technologies. The objective of the study is to examine the link between information and communication technology (ICT), economic growth, energy consumption, and carbon dioxide (CO2) emissions in the context of South Korean economy, by using a novel Morlet wavelet approach. The study applies continuous wavelet power spectrum, the wavelet coherency, and the partial and the multiple wavelet coherency to the year during 1973-2016. The outcomes reveal that the connections among the stated variables progress over frequency and time domain. From the frequency domain point of view, the current study discovers noteworthy wavelet coherence and robust lead and lag linkages. From the time-domain sight, the results display robust but not consistent associations among the considered variables. From an economic point sight, the wavelet method displays that ICT helps to reduce environmental degradation in a medium and long run in the South Korean economy. This emphasizes the significance of having organized strategies by the policymakers to cope up with 2 to 3 years of the occurrence of the huge environmental degradation in South Korea.
Contribution and role of a pyramid/square box on the wound healing suppressant effect of dexamethasone was studied in rats of either sex using excision wound model to record the wound contraction rate and epithelization period. The results showed enhanced wound contraction rate and decreased epithelization period in the pyramid-exposed rats as compared to controls. Thus, it appears that pyramid environment facilitates the process of wound healing. Also, the wound healing suppressant effects of dexamethasone were significantly reduced.
An assemblage of beetle specimens from family Carabidae (ground beetles) was carried out at Kenyir water catchment as an indicator to measure disturbance. The samplings were conducted from 30th July to 1st August 2007 at limestone forest of Teluk Bewah and the dipterocarp forest of Sungai Cicir. 28 individuals from 13 species were collected from Teluk Bewah whereas 54 individuals from ten species was sampled from Sungai Cicir. The carabids were more specious (Simpson Diversity index: 0.97) and more abundant (Margalef index: 5.35) at Teluk Bewah compared to Sungai Cicir (Simpson Diversity index, 0.72: Margalefindex, 2.22). Light trapping was most efficient assembling 97.56% of ground beetles compared to Malaise trap, pitfall and net sweeping. This is the first record of beetle assemblage at Kenyir water catchment, Malaysia. New records for Kenyir, Terengganu, Malaysia are Abacetus sp. 1, Abacetus sp. 2, Acupalpus rectifrotis, Aephnidius adelioides, Dischissus notulatus, Dolichoctis sp., Dolichoctis sp. 2, Dolichoctis straitus, Ophinoea bimaculata, Perigona sp., Pheropsophus piciccollis, Pheropsophus occipitalis, Stenolophus quinquepustulatus, Stenolophus smaragdulus, Stenolophus sp., Tachys coracinus, Casnoidea sp., Orthogonius sp. Seven species coded as Cara C, Cara J, Cara M, Cara N, Cara O, Cara R and Cara S were unidentified and are probably new species to be described in another report. There is moderately high diversity (Simpson Diversity index: 0.846) of Carabidae indicating that ecotourism does not affect diversity of ground beetle at Kenyir Lake.
Health has been the main driver for many urban environmental interventions, particularly in cases of significant health problems linked to poor urban environmental conditions. This paper examines empirically the links between climate change mitigation and health in urban areas, when health is the main driver for improvements. The paper aims to understand how systems of urban governance can enable or prevent the creation of health outcomes via continuous improvements in the environmental conditions in a city. The research draws on cases from two Indian cities where initiatives were undertaken in different sectors: Surat (waste) and Delhi (transportation). Using the literature on network effectiveness as an analytical framework, the paper compares the cases to identify the possible ways to strengthen the governance and policy making process in the urban system so that each intervention can intentionally realize multiple impacts for both local health and climate change mitigation in the long term as well as factors that may pose a threat to long-term progress and revert back to the previous situation after initial achievements.
Aluminium (Al) accumulation is a common trait expressed in at least 60 plant families and particularly prevalent in tropical woody plants. However, the functional significance and genetic or physiological controls on Al accumulation are currently unknown. We tested the hypothesis that differential expression of Al accumulation among wild populations of the Al-accumulating tropical shrub Melastoma malabathricum L. is associated with habitat-related variation in total and exchangeable soil Al concentrations. Mature leaves and seeds were sampled from 20 populations of M. malabathricum growing in six habitats across Peninsular Malaysia, and soil was collected from each site. The seeds were grown in hydroponic solutions comprising 50% Hoagland's solution amended with Al in the form of 1.0 mM AlCl3 to test the hypothesis that differential expression of foliar Al accumulation is an inherited trait. Foliar Al concentrations varied significantly among populations, but were not consistently different among plants growing in different habitats and showed no relationship to total or exchangeable Al concentrations in soils collected at the 20 sites. Mean foliar Al concentration in wild plants was positively correlated with foliar calcium (Ca) concentrations, and with total soil nitrogen (N), Ca and magnesium (Mg) concentrations, across the 20 populations, and Al addition increased foliar concentrations of phosphorus, Ca, Mg and potassium in seedlings. The differential expression of Al accumulation in M. malabathricum populations is uncoupled to local variation in soil Al concentrations, but may be sensitive to local soil-related variation in the availability of other macro-nutrients, in particular N, Ca and Mg. Further research on the factors controlling Al uptake should focus on the plasticity of this trait within populations of Al accumulators and interactions with micro-habitat variation in the availability of the macronutrient cations.
The phenomenon of amok is reviewed in order to demonstrate the heuristic value of an ethno-behavioral model of culture-bound syndromes. The notion that culture-bound syndromes share underlying common disease forms is rejected. Instead, the ethno-behavioral model postulates that culture-bound syndromes consist of culturally specific behavioral repertoires legitimated by culturally sanctioned norms and concepts, but with both behavior and norms acquired in accordance with basic principles of human learning universal to all cultures. Consistent with this model, amok is shown to be a common behavioral pathway for multiple precipitants (which may or may not include disease pathology), but with a distinct form and conceptualization which can be traced to the social learning practices and beliefs of the Malay.