Displaying publications 21 - 40 of 171 in total

Abstract:
Sort:
  1. Assessment of metals distribution and microbial contamination at selected lake waters in and around Miri City, East Malaysia
    Prasanna MV, Nagarajan R, Chidambaram S, Elayaraja A
    Bull Environ Contam Toxicol, 2012 Sep;89(3):507-11.
    PMID: 22684361 DOI: 10.1007/s00128-012-0698-4
    A baseline study was carried out to assess the metal concentrations and microbial contamination at selected Lake waters in and around Miri City, East Malaysia. Sixteen surface water samples were collected at specific Lakes in the environs of major settlement areas and recreational centers in Miri City. The Physico-chemical parameters [pH, Electrical Conductivity (EC) and Dissolved Oxygen (DO)], metals (Fe, Mn, Cu, Cd, Ni and Zn) and Escherichia coli (E. coli) were analysed. The concentrations of Fe, Mn and Ni have been found to be above the permissible limits of drinking water quality standards. The metals data have also been used for the calculation of heavy metal pollution index. Higher values of E. coli indicate microbial contamination in the Lake waters.
    Matched MeSH terms: Water Supply*
  2. Optimizing the coagulation process in a drinking water treatment plant -- comparison between traditional and statistical experimental design jar tests
    Zainal-Abideen M, Aris A, Yusof F, Abdul-Majid Z, Selamat A, Omar SI
    Water Sci Technol, 2012;65(3):496-503.
    PMID: 22258681 DOI: 10.2166/wst.2012.561
    In this study of coagulation operation, a comparison was made between the optimum jar test values for pH, coagulant and coagulant aid obtained from traditional methods (an adjusted one-factor-at-a-time (OFAT) method) and with central composite design (the standard design of response surface methodology (RSM)). Alum (coagulant) and polymer (coagulant aid) were used to treat a water source with very low pH and high aluminium concentration at Sri-Gading water treatment plant (WTP) Malaysia. The optimum conditions for these factors were chosen when the final turbidity, pH after coagulation and residual aluminium were within 0-5 NTU, 6.5-7.5 and 0-0.20 mg/l respectively. Traditional and RSM jar tests were conducted to find their respective optimum coagulation conditions. It was observed that the optimum dose for alum obtained through the traditional method was 12 mg/l, while the value for polymer was set constant at 0.020 mg/l. Through RSM optimization, the optimum dose for alum was 7 mg/l and for polymer was 0.004 mg/l. Optimum pH for the coagulation operation obtained through traditional methods and RSM was 7.6. The final turbidity, pH after coagulation and residual aluminium recorded were all within acceptable limits. The RSM method was demonstrated to be an appropriate approach for the optimization and was validated by a further test.
    Matched MeSH terms: Water Supply/standards*
  3. A study of ecological sanitation as an integrated urban water supply system: case study of sustainable strategy for Kuching City, Sarawak, Malaysia
    Seng DM, Putuhena FJ, Said S, Ling LP
    J Water Health, 2009 Mar;7(1):169-84.
    PMID: 18957785 DOI: 10.2166/wh.2009.103
    A city consumes a large amount of water. Urban planning and development are becoming more compelling due to the fact of growing competition for water, which has lead to an increasing and conflicting demand. As such, investments in water supply, sanitation and water resources management is a strong potential for a solid return. A pilot project of greywater ecological treatment has been established in Kuching city since 2003. Such a treatment facility opens up an opportunity of wastewater reclamation for reuse as secondary sources of water for non-consumptive purposes. This paper aims to explore the potential of the intended purposes in the newly developed ecological treatment project. By utilizing the Wallingford Software model, InfoWorks WS (Water Supply) is employed to carry out a hydraulic modeling of a hypothetical greywater recycling system as an integrated part of the Kuching urban water supply, where the greywater is treated, recycled and reused in the domestic environment. The modeling efforts have shown water savings of about 40% from the investigated system reinstating that the system presents an alternative water source worth exploring in an urban environment.
    Matched MeSH terms: Water Supply*
  4. A holistic framework for design of cost-effective minimum water utilization network
    Wan Alwi SR, Manan ZA, Samingin MH, Misran N
    J Environ Manage, 2008 Jul;88(2):219-52.
    PMID: 17449168
    Water pinch analysis (WPA) is a well-established tool for the design of a maximum water recovery (MWR) network. MWR, which is primarily concerned with water recovery and regeneration, only partly addresses water minimization problem. Strictly speaking, WPA can only lead to maximum water recovery targets as opposed to the minimum water targets as widely claimed by researchers over the years. The minimum water targets can be achieved when all water minimization options including elimination, reduction, reuse/recycling, outsourcing and regeneration have been holistically applied. Even though WPA has been well established for synthesis of MWR network, research towards holistic water minimization has lagged behind. This paper describes a new holistic framework for designing a cost-effective minimum water network (CEMWN) for industry and urban systems. The framework consists of five key steps, i.e. (1) Specify the limiting water data, (2) Determine MWR targets, (3) Screen process changes using water management hierarchy (WMH), (4) Apply Systematic Hierarchical Approach for Resilient Process Screening (SHARPS) strategy, and (5) Design water network. Three key contributions have emerged from this work. First is a hierarchical approach for systematic screening of process changes guided by the WMH. Second is a set of four new heuristics for implementing process changes that considers the interactions among process changes options as well as among equipment and the implications of applying each process change on utility targets. Third is the SHARPS cost-screening technique to customize process changes and ultimately generate a minimum water utilization network that is cost-effective and affordable. The CEMWN holistic framework has been successfully implemented on semiconductor and mosque case studies and yielded results within the designer payback period criterion.
    Matched MeSH terms: Water Supply/economics*
  5. Runoff quality and pollution loadings from a tropical urban catchment
    Yusop Z, Tan LW, Ujang Z, Mohamed M, Nasir KA
    Water Sci Technol, 2005;52(9):125-32.
    PMID: 16445181
    Runoff quality draining from 17.14 km2 urban catchment in Johor Bahru, Malaysia, was analysed. The land-use consists of residential (30.3%), agricultural (27.3%), open space (27.9%), industrial (8.1%) and commercial (6.4%) areas. Three storm events were sampled in detail. These storms produced stormflow between 0.84 mm and 27.82 mm, and peakflow from 2.19 m3/s to 42.36 m3/s. Water quality showed marked variation during storms especially for TSS, BOD and COD with maximum concentrations of 778 mg/l, 135 mg/l and 358 mg/l, respectively. Concentrations of TOC, DOC, NH3-N, Fe and level of colour were also high. In general, the river quality is badly polluted and falls in Class V based on the Malaysian Interim National Water Quality Standards. Event Mean Concentrations (EMC) for various parameters varied considerably between storms. The largest storm produced higher EMC for TSS, NO3-N and SS whereas the smaller storms tend to register higher EMC for BOD, COD, NH3-N, TOC, Ca, K, Mg, Fe and Zn. Such variations could be explained in terms of pollutant availability and the effects of flushing and dilution. Based on a three-month average recurrence interval (ARI) of rainfall, the estimated event loadings (ton/ha) of TSS, BOD, COD, TOC, NH3-N and NO3-N were 0.055, 0.016, 0.012, 0.039, 0.010, 0.0007 and 0.0002, respectively. Heavy metals present in trace quantities. Storms with 3 months ARI could capture about 70% of the total annual loads of major pollutants.
    Matched MeSH terms: Water Supply/standards*
  6. Fulltext Isolation of Legionella pneumophila from hospital cooling towers in Johor, Malaysia
    Abdul Samad BH, Suhaili MR, Baba N, Rajasekaran G
    Med J Malaysia, 2004 Aug;59(3):297-304.
    PMID: 15727373 MyJurnal
    Water-based cooling towers and their water supply at two hospitals in Johor were surveyed for the presence Legionella pneumophila. L. pneumophila were grown from 19 (76%) out of 25 collected water samples. One hospital cooling tower was contaminated with L. pneumophila serogroup 1.
    Matched MeSH terms: Water Supply/standards
  7. Comparison of field measurements to predicted reaeration coefficients, k2, in the application of a water quality model, QUAL2E, to a tropical river
    Mohamed M, Stednick JD, Smith FM
    Water Sci Technol, 2002;46(9):47-54.
    PMID: 12448451
    Some of the many tools used for watershed management are mathematical and computer models for wasteload allocations. QUAL2E is one of the most popular water quality models used for such purposes. The question arises as to whether the model is applicable in a different climate such as that in the tropics. In this study, QUAL2E was used to model Sg. Selangor River in Malaysia using the predictive equations for reaeration coefficient (k2) within the model and the measured reaeration coefficients for the river. The study results indicated that use of the reaeration coefficient (k2) measured at Sg. Selangor River did give the lowest standard error (SE) for the simulation of water quality during the 7Q10 low-flow period which is considered as the worst scene scenario in water quality modeling. But during calibration and validation using actual low-flow discharge data, the measured reaeration coefficients did not give the lowest standard error (SE). In conclusion, the results indicated that QUAL2E is applicable in tropical rivers when used with the modeled river parameters (i.e. hydraulic parameters, meteorological conditions etc.). Measured reaeration coefficients produced good results and several predictive equations also produced comparatively good results.
    Matched MeSH terms: Water Supply/standards*
  8. Removal of iron and manganese by artificial destratification in a tropical climate (Upper Layang Reservoir, Malaysia)
    Ismail R, Kassim MA, Inman M, Baharim NH, Azman S
    Water Sci Technol, 2002;46(9):179-83.
    PMID: 12448467
    Environmental monitoring was carried out at Upper Layang Reservoir situated in Masai, Johor, Malaysia. The study shows that thermal stratification and natural mixing of the water column do exist in the reservoir and the level of stratification varies at different times of the year. Artificial destratification via diffused air aeration techniques was employed at the reservoir for two months. The results show that thermal stratification was eliminated after a week of continuous aeration. The concentrations of iron and to a lesser extent manganese in the water column was also reduced during the aeration period.
    Matched MeSH terms: Water Supply*
  9. Fulltext Major inorganic elements in tap water samples in Peninsular Malaysia
    Azrina A, Khoo HE, Idris MA, Amin I, Razman MR
    Malays J Nutr, 2011 Aug;17(2):271-6.
    PMID: 22303580 MyJurnal
    Quality drinking water should be free from harmful levels of impurities such as heavy metals and other inorganic elements.
    Matched MeSH terms: Water Supply*
  10. Fulltext Environmental management for dengue control: a systematic review protocol
    Mahmud MAF, Abdul Mutalip MH, Lodz NA, Muhammad EN, Yoep N, Hashim MH, et al.
    BMJ Open, 2019 05 15;9(5):e026101.
    PMID: 31097485 DOI: 10.1136/bmjopen-2018-026101
    INTRODUCTION: Dengue is among the most important mosquito-borne diseases, with more than half of the world's population at risk of infection in dengue endemic countries. Environmental management, which includes any activities that involve environmental modification, environmental manipulation and changes to human behaviour have been used to mitigate the risk of dengue transmission. In this protocol, we will integrate the data from various sources to assess the overall effect of environmental management on the incidence of dengue and other entomological indices.

    METHODS AND ANALYSES: We will conduct a systematic review of intervention that assess the effect of environmental management on the incidence of dengue and/or entomological indices. We will include any studies that include intervention through environmental management for dengue control, involving environmental modification, environmental manipulation and changes to human behaviour. A comprehensive search will be performed in electronic databases PUBMED, CENTRAL, SCOPUS, Web of Science and relevant research websites such as PROPSERO, WHO ICTRP and ClinicalTrials.gov to identify studies that meet our inclusion criteria. A systematic approach to searching, screening, reviewing and data extraction will be applied based on Preferred Reporting Items for Systematic reviews and Meta-Analysis. Titles, abstract, keywords for eligibility will be examined independently by researchers. The quality of the included studies will be assessed using quality assessment tool for studies with diverse design and Cochrane risk of bias tool. The characteristics of the selected articles will be described based on the study design, types of intervention and outcomes of the study in various countries. These include the types of environmental management intervention methods and the effectiveness of the intervention in reducing dengue cases or incidence and impact on entomological indices.

    ETHICS AND DISSEMINATION: We will register this systematic review with the National Medical Research Register, Ministry of Health Malaysia. This protocol also had been registered with the PROSPERO. No ethical approval is necessary, as there will be no collection of primary data. The results will be disseminated though a peer-reviewed publication and conference presentation.

    TRIAL REGISTRATION NUMBER: CRD42018092189.

    Matched MeSH terms: Water Supply/standards
  11. Occurrence of free-living amoebae (Acanthamoeba, Balamuthia, Naegleria) in water samples in Peninsular Malaysia
    Gabriel S, Khan NA, Siddiqui R
    J Water Health, 2019 Feb;17(1):160-171.
    PMID: 30758312 DOI: 10.2166/wh.2018.164
    The aim of this study was to determine the occurrence of free-living amoebae (FLA) in Peninsular Malaysia and to compare different methodologies to detect them from water samples. Water samples were collected from tap water, recreational places, water dispensers, filtered water, etc. and tested for FLA using both cultivation and polymerase chain reaction (PCR) via plating assays and centrifugation methods. Amoebae DNA was extracted using Instagene matrix and PCR was performed using genus-specific primers. Of 250 samples, 142 (56.8%) samples were positive for presence of amoebae, while 108 (43.2%) were negative. Recreational water showed higher prevalence of amoebae than tap water. PCR for the plating assays revealed the presence of Acanthamoeba in 91 (64%) samples and Naegleria in 99 (70%) of samples analysed. All samples tested were negative for B. mandrillaris. In contrast, the centrifugation method was less effective in detecting amoebae as only one sample revealed the presence of Acanthamoeba and 52 (29%) samples were positive for Naegleria. PCR assays were specific and sensitive, detecting as few as 10 cells. These findings show the vast distribution and presence of FLA in all 11 states of Peninsular Malaysia. Further studies could determine the possible presence of pathogenic species and strains of free-living amoebae in public water supplies in Malaysia.
    Matched MeSH terms: Water Supply/statistics & numerical data*
  12. Fulltext Quantitative Microbial Risk Assessment of Drinking Water Quality to Predict the Risk of Waterborne Diseases in Primary-School Children
    Ahmed J, Wong LP, Chua YP, Channa N, Mahar RB, Yasmin A, et al.
    Int J Environ Res Public Health, 2020 04 17;17(8).
    PMID: 32316585 DOI: 10.3390/ijerph17082774
    Primary-school children in low- and middle-income countries are often deprived of microbiologically safe water and sanitation, often resulting in a high prevalence of gastrointestinal diseases and poor school performance. We used Quantitative Microbial Risk Assessment (QMRA) to predict the probability of infection in schoolchildren due to consumption of unsafe school water. A multistage random-sampling technique was used to randomly select 425 primary schools from ten districts of Sindh, Pakistan, to produce a representative sample of the province. We characterized water supplies in selected schools. Microbiological testing of water resulted in inputs for the QMRA model, to estimate the risks of infections to schoolchildren. Groundwater (62%) and surface water (38%) were identified as two major sources of drinking water in the selected schools, presenting varying degrees of health risks. Around half of the drinking-water samples were contaminated with Escherichia coli (49%), Shigella spp. (63%), Salmonella spp. (53%), and Vibrio cholerae (49%). Southern Sindh was found to have the highest risk of infection and illness from Campylobacter and Rotavirus. Central and Northern Sindh had a comparatively lower risk of waterborne diseases. Schoolchildren of Karachi were estimated to have the highest probability of illness per year, due to Campylobacter (70%) and Rotavirus (22.6%). Pearson correlation was run to assess the relationship between selected pathogens. V. cholerae was correlated with Salmonella spp., Campylobacter, Rotavirus, and Salmonella spp. Overall, the risk of illness due to the bacterial infection (E. coli, Salmonella spp., V. cholerae, Shigella, and Campylobacter) was high. There is a dire need for management plans in the schools of Sindh, to halt the progression of waterborne diseases in school-going children.
    Matched MeSH terms: Water Supply*
  13. Fulltext Optimal virtual water flows for improved food security in water-scarce countries
    Maroufpoor S, Bozorg-Haddad O, Maroufpoor E, Gerbens-Leenes PW, Loáiciga HA, Savic D, et al.
    Sci Rep, 2021 10 25;11(1):21027.
    PMID: 34697363 DOI: 10.1038/s41598-021-00500-6
    The worsening water scarcity has imposed a significant stress on food production in many parts of the world. This stress becomes more critical when countries seek self-sufficiency. A literature review shows that food self-sufficiency has not been assessed as the main factor in determining the optimal cultivation patterns. However, food self-sufficiency is one of the main policies of these countries and requires the most attention and concentration. Previous works have focused on the virtual water trade to meet regional food demand and to calculate trade flows. The potential of the trade network can be exploited to improve the cropping pattern to ensure food and water security. To this end, and based on the research gaps mentioned, this study develops a method to link intra-country trade networks, food security, and total water footprints (WFs) to improve food security. The method is applied in Iran, a water-scarce country. The study shows that 781 × 106 m3 of water could be saved by creating a trade network. Results of the balanced trade network are input to a multi-objective optimization model to improve cropping patterns based on the objectives of achieving food security and preventing water crises. The method provides 400 management scenarios to improve cropping patterns considering 51 main crops in Iran. Results show a range of improvements in food security (19-45%) and a decrease in WFs (2-3%). The selected scenario for Iran would reduce the blue water footprint by 1207 × 106 m3, and reduce the cropland area by 19 × 103 ha. This methodology allows decision makers to develop policies that achieve food security under limited water resources in arid and semi-arid regions.
    Matched MeSH terms: Water Supply*
  14. Fulltext The influence of aquatic predators on mosquito abundance in animal drinking troughs in New Zealand
    Zuharah WF, Lester PJ
    J Vector Ecol, 2010 Dec;35(2):347-53.
    PMID: 21175942 DOI: 10.1111/j.1948-7134.2010.00093.x
    The occurrence and abundance of mosquito populations may be associated with the abundance of predators. We examined the relationship between aquatic predators and populations of mosquitoes in animal water troughs in Waikanae, New Zealand. We also investigated the effects of water volume and environmental factors (temperature, rainfall, wind speed, humidity, and pressure) in order to further understand factors influencing mosquito and predator populations. Logistic regression indicated that the presence or absence of mosquitoes was primarily affected by three factors: predator abundance, week of observation, and water volume. Pearson's correlation indicated that the presence of predators had a positive correlation with water volume (r² = 0.176, p< 0.05). Otherwise, the presence of mosquito larvae in water troughs was negatively correlated with water volume (r² =-0.159, p=0.022) and wind speed (r² =0.142, p=0.041). We established a translocation experiment in which predators or mosquitoes were moved between troughs in order to examine the prey survival rate after exposure to Anisops wakefieldi predators. The survival rate of mosquitoes was not significantly different, between 0-0.1%, irrespective of the number of predators translocated (1-9) or the initial mosquito density (20-70 larvae). Our results suggested that A. wakefieldi predators may have the potential to be a promising biological control tool for the control of mosquito populations by altering mosquito population dynamics.
    Matched MeSH terms: Water Supply*
  15. Assessment of pollution and improvement measure of water quality parameters using scenarios modeling for sungai Selangor basin
    Md. Sadek Uddin Chowdhury, Faridah Othman, Wan Zurina Wan Jaafar, Nuzaima Che Mood, Md. Ibrahim Adham
    Sains Malaysiana, 2018;47:457-469.
    Sungai Selangor is very important from the viewpoint of water supply and multipurpose water use in Malaysia. The
    water quality of this river is degrading due to point and non-point sources of pollution. This study, focus on the water
    quality assessment and simulation the effect of the pollution sources from urbanization to the Sungai Selangor basin.
    Water quality Index (WQI) is used to define the status of river water quality and the QUAL2K was used as a simulation
    model. Water quality parameters DO, BOD and NH3
    -N have been chosen for modeling. In addition, five different model
    scenarios were simulated to observe the impacts of pollution sources on the Sungai Selangor water quality. WQI results
    showed that most of the stations in this river basin recorded water inferior to Class III. The water quality model presented
    different scenarios for changes of Sungai Selangor water quality. Simulation results for different scenarios showed
    that reduced levels of BOD and NH3
    -N at 51.10% and 66.18%, respectively, can be obtained if Scenario-5 is employed.
    The river water quality issue in the Rawang sub- basin within the study area is considered crucial to create significant
    improvement within the sub basin and in the downstream area of Sungai Selangor basin.
    Matched MeSH terms: Water Supply
  16. Fulltext Short communications impact of water resources availability on agricultural sustainability in the Gavkhuni River Basin, Iran
    Hamidreza Salemi, Mohd Amin Mohd Soom, Lee, Teang Shui, Mohd Kamil Yusoff
    Pertanika Journal of Science & Technology, 2011;19(2):213-227.
    MyJurnal
    One of the most interesting water management case studies in Iran is the case of Zayandehrud River, the main river that supplies water to Isfahan Province which is located in Gavkhuni River Basin (GRB). This paper examines the present and future demands for water and determines the extent to which water will be available for agricultural use by the year 2020. Although demand and supply conditions in 2000 were more or less in balance, there was an increase in the supply of some 28% by 2010 due to the completion of the third trans-basin diversion and the development of other local water sources. However, the demand exceeded its supply in 2010 and the basin fell into severe deficit. In this condition, the only way to keep supply and demand in balance is to reduce allocations to agriculture. By 2020, agriculture would only have 5% more water than the present and water supply is only 90% that of the normal, and this would then shrink from 2025 onwards. In other words, agriculture would have to be sacrificed in order to ensure full supplies of water for the other sectors. The scenarios examined reveal that a sustainable agriculture can only be accomplished by water saving practices and management measures, which may further lead to reduced demand, control supplies, and improve the efficiency of water use.
    Matched MeSH terms: Water Supply
  17. Fulltext Evaluation of yield and groundwater quality for selected wells in Malaysia
    Mohammed, Thamer Ahmed, Abdul Halim Ghazali
    Pertanika Journal of Science & Technology, 2009;17(1):-.
    MyJurnal
    In Malaysia, the use of groundwater can help to meet the increasing water demand. The utilization of the aquifers is currently contributing in water supplies, particularly for the northern states. In this study, quantitative and qualitative assessments were carried out for the groundwater exploitation in the states of Kelantan, Melaka, Terengganu and Perak. The relevant data was acquired from the Department of Mineral and Geoscience, Malaysia. The quantitative assessment mainly included the determination of the use to yield ratio (UTY). The formula was proposed to determine the UTY ratio for aquifers in Malaysia. The proposed formula was applied to determine the maximum UTY ratios for the aquifers located in the states of Kelantan, Melaka, and Terengganu, and were found to be 4.2, 5.2 and 0.6, respectively. This indicated that exploitation of groundwater was beyond the safe limit in the states of Kelantan and Melaka. The qualitative assessment showed that the groundwater is slightly acidic. In addition, the concentrations of iron and manganese were found to be higher than the allowable limits, but the chloride concentration was found within the allowable limit.
    Matched MeSH terms: Water Supply
  18. Rainfall infiltration through unsaturated layered soil column
    Aniza Ibrahim, Muhammad Mukhlisin, Othman Jaafar
    Sains Malaysiana, 2014;43:1477-1484.
    Infiltration caused by rainfall will lead to the changes of moisture content and soil pore water pressure or matric suction of the soil. These changes indicate the behavior of the soil especially during wetting and drying process. This paper presents the experimental test result of rain water infiltration into soil column for two samples of soils. The main objectives were to study the effect of rainfall intensity and duration of soil infiltration process for the forest soil and to compare its result to the gravelly sand. Infiltration experimental in this study involved three main components; water supply system, soil column and instrumentations, including percolation collection system. This study uses two types of tensiometers; 5 and 10 cm long. The results of TDR and tensiometers which were used to obtained moisture content and matric suction, respectively, shows that the system was successfully developed. For the forest soil, the result showed that moisture content of the top section is higher compared with the other sections. On the other hand, for gravelly sand, the moisture content in middle section is higher compared with the top and bottom section of the soil. Meanwhile, matric suction for both soils dropped during rainfall and gradually increases towards drying process. Other than that the comparison of soil matric suction between 5 and 10 cm tensiometers shows significant results for gravelly sand compared to forest soil.
    Matched MeSH terms: Water Supply
  19. Innovative dual storage heat tank combination solar thermal, air conditioners and heat pump of water heating systems
    Chen WL, Wong KL, Li YC
    Sains Malaysiana, 2015;44:1707-1714.
    Tropical or subtropical countries are very suitable for the development of solar and heat pump technology. This paper
    proposed the integration of air conditioners that exhaust heat with solar energy to enhance the overall efficiency of thermal
    energy conversion. The analysis of thermal storage tanks of different volumes showed that a two-ton air conditioner
    operating for an hour produced double energy than normal sunshine for a day. With thermal storage tanks of fixed
    volume, the integration of air conditioners of different tons with solar energy indicated that air conditioners of less tons
    produced faster and more efficient energy conversion. Therefore, this paper proposed that the modification of condenser
    in domestic air conditioner into water-cooled condenser not only enhance the energy efficiency of air conditioners but
    also increased hot water supplies since hot water from air conditioners could be integrated into solar water heaters. By
    doing so, energy conservation and carbon reduction could be achieved.
    Matched MeSH terms: Water Supply
  20. Groundwater quality assessment for irrigation by adopting new suitability plot and spatial analysis based on fuzzy logic technique
    S C, M V P, S V, M N, K P, Panda B, et al.
    Environ Res, 2022 03;204(Pt A):111729.
    PMID: 34478727 DOI: 10.1016/j.envres.2021.111729
    This study was focused on identifying the region suitable for agriculture-based, using new irrigation groundwater quality plot and its spatio-temporal variation with fuzzy logic technique in a geographic information system (GIS) platform. Six hundred and eighty groundwater samples were collected during pre, southwest, northeast, and post monsoon periods. A new ternary plot was also attempted to determine the irrigation suitability of water by considering four essential parameters such as sodium adsorption ratio (SAR), permeability index (PI), Sodium percentage (Na %), and electrical conductivity (EC). The derived ternary plot was the most beneficial over other available plots, as it incorporated four parameters, and it differs from the US Salinity Laboratory (USSL) plot, such that the groundwater with higher EC could also be used for irrigation purposes, depending on the Na%. The ternary plot revealed that the groundwater predominantly manifested good to moderate category during post, northeast, and southwest monsoons. The assessment with the amount of fertilizer used during the study period showed that the NPK fertilizers were effectively used for irrigation during monsoon periods. Spatial maps on EC, Kelly's ratio, Mg hazard, Na%, PI, potential salinity (PS), SAR, residual sodium carbonate (RSC), and soluble sodium percentage (SSP) were prepared for each season using fuzzy membership values, integrated for each season. A final suitability map derived by an overlay of all the seasonal outputs has identified that the groundwater in the western and the eastern part of the study area are suitable for agriculture. The study recommends cultivation of groundwater-dependent short-term crops, along the western and northern regions of the study area during the pre-monsoon season.
    Matched MeSH terms: Water Supply
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links