Displaying publications 21 - 40 of 136 in total

Abstract:
Sort:
  1. Luvan M, Kanthan SR, Roshan G, Saw A
    Malays Orthop J, 2015 Nov;9(3):35-39.
    PMID: 28611907 MyJurnal DOI: 10.5704/MOJ.1511.005
    Corticotomy is an essential procedure for deformity correction and there are many techniques described. However there is no proper classification of the fracture pattern resulting from corticotomies to enable any studies to be conducted. We performed a retrospective study of corticotomy fracture patterns in 44 patients (34 tibias and 10 femurs) performed for various indications. We identified four distinct fracture patterns, Type I through IV classification based on the fracture propagation following percutaneous corticotomy. Type I transverse fracture, Type II transverse fracture with a winglet, Type III presence of butterfly fragment and Type IV fracture propagation to a fixation point. No significant correlation was noted between the fracture pattern and the underlying pathology or region of corticotomy.
    Matched MeSH terms: Tibia
  2. Jia TY, Gurmeet S, Asni A, Ramanathan R
    Malays Orthop J, 2015 Mar;9(1):14-17.
    PMID: 28435589 MyJurnal DOI: 10.5704/MOJ.1503.016
    Bone graft is essential in various orthopaedic procedures. Among the many donor sites for harvesting autologous bone graft, the iliac crest has been the most commonly used. However, for foot and ankle procedures the proximal tibia has gained popularity as an alternative donor site due to its anatomic proximity to the primary surgical site. In this article we evaluated the possible complications associated with harvesting proximal tibia bone graft. Our study showed the low incidence of morbidity in harvesting proximal tibia bone graft, thereby providing a good alternative donor for foot and ankle procedures.
    Matched MeSH terms: Tibia
  3. Yoga, R., Sivapathasundaram, N., Suresh, C.
    Malays Orthop J, 2009;3(1):72-77.
    MyJurnal
    We evaluated the efficacy of a cement gun to improve the depth of cement penetration in total knee arthroplasty. Ninety-one consecutive patients from two hospitals were recruited for this study. For Group I cement was applied to the tibial baseplate and the proximal tibia with fingers. Group 2 had similar application of cement to the tibial baseplate but cement was pressurized into the proximal tibia using a cement gun.. The knee was kept extended until the cement hardened. Standard post-operative x-rays were reviewed to assess cement penetration into the proximal tibia. The mean cement penetration was 2.1 mm in Group 1 and 3.1 mm in Group 2 and the difference was statistically significant. The use of the cement gun improves cement penetration into the proximal tibia and facilitates early stability of the implant fixation to the bone.
    Matched MeSH terms: Tibia
  4. Timothy, C.T.J., Mansor, A., Wengvei, C.T.K.
    JUMMEC, 2017;20(1):1-3.
    MyJurnal
    Pulmonary embolism is the obstruction of the pulmonary artery or its branches, commonly by thrombus or
    fat. We report an unusual case of double pathology - both pulmonary thromboembolism and fat embolism
    syndrome in a patient with bilateral femur and bilateral tibia fractures. This highlights the importance of a high
    index of suspicion of these conditions while managing patients with multiple long bone fractures. Morbidity
    and mortality can be significantly reduced with prompt and appropriate prevention strategies.
    Matched MeSH terms: Tibia
  5. Che Nor Zarida Che Seman, Zamzuri Zakaria, Zunariah Buyong, Mohd Shukrimi Awang, Ahmad Razali Md Ralib @ Md Raghib
    MyJurnal
    A novel injectable calcium phosphate bone cement (osteopaste) has been
    developed. Its potential application in orthopaedics as a filler of bone defects has been
    studied. The biomaterial was composed of tetra-calcium phosphate (TTCP) and tricalcium
    phosphate (TCP) powder. The aim of the present study was to evaluate the
    healing process of osteopaste in rabbit tibia.(Copied from article).
    Matched MeSH terms: Tibia
  6. Lee JI, Jaffar MSA, Choi HG, Kim TW, Lee YS
    J Knee Surg, 2022 Feb;35(3):299-307.
    PMID: 32659817 DOI: 10.1055/s-0040-1713898
    The purpose of this study was to evaluate the outcomes of isolated medial patellofemoral ligament (MPFL) reconstruction, regardless of the presence of predisposing factors. A total of 21 knees that underwent isolated MPFL reconstruction from March 2014 to August 2017 were included in this retrospective series. Radiographs of the series of the knee at flexion angles of 20, 40, and 60 degrees were acquired. The patellar position was evaluated using the patellar tilt angle, sulcus angle, congruence angle (CA), and Caton-Deschamps and Blackburne-Peel ratios. To evaluate the clinical outcome, the preoperative and postoperative International Knee Documentation Committee (IKDC) and Lysholm knee scoring scales were analyzed. To evaluate the postoperative outcomes based on the predisposing factors, the results were separately analyzed for each group. Regarding radiologic outcomes, 20-degree CA was significantly reduced from 10.37 ± 5.96° preoperatively to -0.94 ± 4.11° postoperatively (p = 0.001). In addition, regardless of the predisposing factors, delta values of pre- and postoperation of 20-degree CA were not significantly different in both groups. The IKDC score improved from 53.71 (range: 18-74) preoperatively to 94.71 (range: 86-100) at the last follow-up (p = 0.004), and the Lysholm score improved from 54.28 (range: 10-81) preoperatively to 94.14 (range: 86-100) at the last follow-up (p = 0.010). Isolated MPFL reconstruction provides a safe and effective treatment for patellofemoral instability, even in the presence of mild predisposing factors, such as trochlear dysplasia, increased patella height, increased TT-TG distance, or valgus alignment. This is a Level 4, case series study.
    Matched MeSH terms: Tibia
  7. Harith H, Schmutz B, Malekani J, Schuetz MA, Yarlagadda PK
    Med Eng Phys, 2016 Mar;38(3):280-5.
    PMID: 26739124 DOI: 10.1016/j.medengphy.2015.11.012
    Anatomically precontoured plates are commonly used to treat periarticular fractures. A well-fitting plate can be used as a tool for anatomical reduction of the fractured bone. Recent studies highlighted that some plates fit poorly for many patients due to considerable shape variations between bones of the same anatomical site. While it is impossible to design one shape that fits all, it is also burdensome for the manufacturers and hospitals to produce, store and manage multiple plate shapes without the certainty of utilization by a patient population. In this study, we investigated the number of shapes required for maximum fit within a given dataset, and if they could be obtained by manually deforming the original plate. A distal medial tibial plate was automatically positioned on 45 individual tibiae, and the optimal deformation was determined iteratively using finite element analysis simulation. Within the studied dataset, we found that: (i) 89% fit could be achieved with four shapes, (ii) 100% fit was impossible through mechanical deformation, and (iii) the deformations required to obtain the four plate shapes were safe for the stainless steel plate for further clinical use. The proposed framework is easily transferable to other orthopaedic plates.
    Matched MeSH terms: Tibia
  8. Ali S, Osman NA, Mortaza N, Eshraghi A, Gholizadeh H, Wan Abas WA
    Clin Biomech (Bristol, Avon), 2012 Nov;27(9):943-8.
    PMID: 22795863 DOI: 10.1016/j.clinbiomech.2012.06.004
    The interface pressure between the residual limb and prosthetic socket has a significant effect on an amputee's satisfaction and comfort. Liners provide a comfortable interface by adding a soft cushion between the residual limb and the socket. The Dermo and the Seal-In X5 liner are two new interface systems and, due to their relative infancy, very little are known about their effect on patient satisfaction. The aim of this study was to compare the interface pressure with these two liners and their effect on patient satisfaction.
    Matched MeSH terms: Tibia/physiopathology*; Tibia/surgery
  9. Ooi FK, Singh R, Singh HJ, Umemura Y, Nagasawa S
    J Physiol Sci, 2011 Nov;61(6):487-95.
    PMID: 21870136 DOI: 10.1007/s12576-011-0169-4
    The effects of deconditioning on exercise-induced bone gains in rats were investigated in 12-week-old female WKY rats performing a standard jumping exercise regimen for either 8, 12 or 24 weeks, followed by sedentary periods of either 24, 12 or 0 weeks, respectively. Age-matched controls received no exercise over the same period. At the end of the training/sedentary period, the tibiae were harvested for analyses of bone parameters. Gains in tibial fat-free dry weight decayed within 12 weeks of deconditioning, but gains in tibial ultimate bending force (strength), maximum diameter and cortical area were still present at 12 weeks of deconditioning. With the exception of cortical area, all other exercise-induced bone gains decayed by the 24th week of deconditioning. It appears that the decay in exercise-induced bone gains in strength, physical and morphological properties is not uniform, and that gains in fat-free dry weight seem to decay earlier.
    Matched MeSH terms: Tibia/metabolism; Tibia/physiology*
  10. Sulaiman AR, Munajat I, Liau KM, Salehuddin AY, Shukrimi A
    Med J Malaysia, 2006 Dec;61 Suppl B:48-50.
    PMID: 17600992
    Distraction osteogeneis over intramedullary nail has a benefit of decreasing the time for external fixation thus reducing the rate of associated complications. However, risk of panosteomyelitis is still the major worry. We are reporting two patients who underwent the procedure. The first case was a 13-year-old girl requiring 6 cm of femoral lengthening and the second case was a 17-year-old girl who required 5 cm of tibial lengthening. The healing index was 19.5 days/cm and 14.8 days/cm respectively, compared favorably to 30 days/cm with traditional method of distraction osteogenesis. There were mild pin tract infections and joint stiffness which responded to non-operative treatment.
    Matched MeSH terms: Tibia/radiography; Tibia/surgery*
  11. Sulaiman AR, Nordin S, Faisham WI, Zulmi W, Halim AS
    J Orthop Surg (Hong Kong), 2006 Apr;14(1):64-6.
    PMID: 16598090
    Resection and reconstruction using a vascularised fibular graft is a viable alternative treatment for congenital pseudarthrosis of the tibia, although distal junctional nonunion and residual deformity are known complications that are difficult to treat. We illustrate 2 cases in which bony union was achieved following a technique using fibular grafting and intramedullary nailing, without additional bone grafting. This technique was feasible because of hypertrophy of the fibular graft.
    Matched MeSH terms: Tibia/abnormalities; Tibia/surgery*
  12. Khadijah K, Mashita M, Saidu MF, Fazilah F, Khalid KA
    Med J Malaysia, 2004 May;59 Suppl B:123-4.
    PMID: 15468849
    This study is to qualitatively evaluate a locally produced hydroxyapatite (HA), made by AMREC-SIRIM in an experimental animal bone defect using New Zealand White (NZW) rabbits. HA cylindrical blocks measuring 2.5 mm (D) x 1.0 mm (H) were implanted in the rabbits' left tibia. The tibias were harvested within one to three weeks post-implantation. The implantion site was cut into thin undecalcified sections of about 30 microm to 60 microm and stained with Toluidine Blue and Goldner's Masson Trichrome. Microscopic examinations using standard light microscopy of these slides were performed.
    Matched MeSH terms: Tibia/pathology; Tibia/surgery
  13. Najafpour HD, Suzina AH, Nizam A, Samsudin AR
    Med J Malaysia, 2004 May;59 Suppl B:121-2.
    PMID: 15468848
    There was a significant increased in Absolute Contact Length measurements of endosteal bone growth along the Nickel-Titanium (NiTi) implant coated with the natural coral powder and Hydroxyapatite (HA) compared to the non-calcium coated implants. This study demonstrated that coated implants seemed to show earlier and higher osseointergration phenomena compared to non coated ones. Furthermore, there was significantly greater bone-to-implant contact at the apical 1/3rd of the coated implants.
    Matched MeSH terms: Tibia/pathology; Tibia/surgery
  14. Yasin NF, Ajit Singh V, Saad M, Omar E
    BMC Cancer, 2015;15:289.
    PMID: 25884718 DOI: 10.1186/s12885-015-1234-9
    Limb salvage surgery is a treatment of choice for sarcomas of the extremities. One of the options in skeletal reconstruction after tumour resection is by using a recycled bone autograft. The present accepted methods of recycling bone autografts include autoclaving, pasteurization and irradiation. At the moment there is lack of studies that compare the effectiveness of various sterilization methods used for recycling bone autografts and their effects in terms of bone incorporation. This study was performed to determine the effects of different methods of sterilization on bone autografts in rabbit by radiological, biomechanical and histopathological evaluations.
    Matched MeSH terms: Tibia/pathology; Tibia/transplantation*
  15. Lee YS, Howell SM, Won YY, Lee OS, Lee SH, Vahedi H, et al.
    Knee Surg Sports Traumatol Arthrosc, 2017 Nov;25(11):3467-3479.
    PMID: 28439636 DOI: 10.1007/s00167-017-4558-y
    PURPOSE: A systematic review was conducted to answer the following questions: (1) Does kinematically aligned (KA) total knee arthroplasty (TKA) achieve clinical outcomes comparable to those of mechanically aligned (MA) TKA? (2) How do the limb, knee, and component alignments differ between KA and MA TKA? (3) How is joint line orientation angle (JLOA) changed from the native knee in KA TKA compared to that in MA TKA?

    METHODS: Nine full-text articles in English that reported the clinical and radiological outcomes of KA TKA were included. Five studies had a control group of patients who underwent MA TKA. Data on patient demographics, clinical scores, and radiological results were extracted. There were two level I, one level II, three level III, and three level IV studies. Six of the nine studies used patient-specific instrumentation, one study used computer navigation, and two studies used manual instrumentation.

    RESULTS: The clinical outcomes of KA TKA were comparable or superior to those of MA TKA with a minimum 2-year follow-up. Limb and knee alignment in KA TKA was similar to those in MA TKA, and component alignment showed slightly more varus in the tibial component and slightly more valgus in the femoral component. The JLOA in KA TKA was relatively parallel to the floor compared to that in the native knee and not oblique (medial side up and lateral side down) compared to that in MA TKA. The implant survivorship and complication rate of the KA TKA were similar to those of the MA TKA.

    CONCLUSION: Similar or better clinical outcomes were produced by using a KA TKA at early-term follow-up and the component alignment differed from that of MA TKA. KA TKA seemed to restore function without catastrophic failure regardless of the alignment category up to midterm follow-up. The JLOA in KA TKA was relatively parallel to the floor similar to the native knee compared to that in MA TKA. The present review of nine published studies suggests that relatively new kinematic alignment is an acceptable and alternative alignment to mechanical alignment, which is better understood. Further validation of these findings requires more randomized clinical trials with longer follow-up.

    LEVEL OF EVIDENCE: Level II.

    Matched MeSH terms: Tibia/physiopathology; Tibia/surgery
  16. Ramlee MH, Sulong MA, Garcia-Nieto E, Penaranda DA, Felip AR, Kadir MRA
    Med Biol Eng Comput, 2018 Oct;56(10):1925-1938.
    PMID: 29679256 DOI: 10.1007/s11517-018-1830-3
    Pilon fractures can be caused by high-energy vertical forces which may result in long-term patient immobilization. Many experts in orthopedic surgery recommend the use of a Delta external fixator for type III Pilon fracture treatment. This device can promote immediate healing of fractured bone, minimizing the rate of complications as well as allowing early mobilization. The characteristics of different types of the Delta frame have not been demonstrated yet. By using the finite element method, this study was conducted to determine the biomechanical characteristics of six different configurations (Model 1 until Model 6). CT images from the lower limb of a healthy human were used to reconstruct three-dimensional models of foot and ankle bones. All bones were assigned with isotropic material properties and the cartilages were assigned to exhibit hyperelasticity. A linear link was used to simulate 37 ligaments at the ankle joint. Axial loads of 70 and 350 N were applied at the proximal tibia to simulate the stance and swing phase. The metatarsals and calcaneus were fixed distally in order to prevent rigid body motion. A synthetic ankle bone was used to validate the finite element model. The simulated results showed that Delta3 produced the highest relative micromovement (0.09 mm, 7 μm) during the stance and swing phase, respectively. The highest equivalent von Mises stress was found at the calcaneus pin of the Delta4 (423.2 MPa) as compared to others. In conclusion, Delta1 external fixator was the most favorable option for type III Pilon fracture treatment. Graphical abstract ᅟ.
    Matched MeSH terms: Tibia/physiopathology; Tibia/surgery; Tibial Fractures/physiopathology*; Tibial Fractures/surgery*
  17. Muhammad AS, Jamil K, Abdul-Rashid AH, Abd-Rasid AF, Aizuddin NA
    Eur J Orthop Surg Traumatol, 2024 Jul;34(5):2407-2412.
    PMID: 38619601 DOI: 10.1007/s00590-024-03943-5
    PURPOSE: This study aims to compare the functional and radiological outcomes following both guided growth surgery (GGS) and acute corrective osteotomy (ACO) correction of angular deformities in children with rickets.

    METHODS: A total of 8 and 7 children who had gradual GGS and ACO correction, respectively, for angular deformities due to rickets from 2002 to 2022 were recalled for follow-up. Demographic data, types of rickets, data on pharmacological treatment, biochemical parameters, recurrence of angular deformity and postoperative complications were obtained from the medical records. A radiographic evaluation of the leg was performed to determine the tibiofemoral angle. For functional evaluation, the Active Scale for Kids (ASK) and Lower Extremity Functional Scale (LEFS) instruments were used for children below and above 15 years old, respectively.

    RESULTS: In terms of the tibiofemoral angle, the GGS group documented greater angle changes compared to the ACO group, but the difference was not significant. In terms of functional outcomes, the overall score percentage of both groups was comparable with the GGS group showing a trend of higher score percentage compared to the ACO group. The GGS group presented no complication while 2 neurovascular injuries and 1 implant failure were recorded in the ACO group.

    CONCLUSION: Both GGS and ACO procedures resulted in similar radiographic and functional outcomes for the treatment of rickets in children. GGS may be advantageous in terms of reducing complications of surgery. Nevertheless, the choice of surgical intervention should be made based on the patient's circumstances and the surgeon's preference.

    Matched MeSH terms: Tibia/abnormalities; Tibia/surgery
  18. Chin KY, Ima-Nirwana S
    Aging Male, 2015 Mar;18(1):60-6.
    PMID: 25166624 DOI: 10.3109/13685538.2014.954995
    This study aimed to determine the effects of orchidectomy and supraphysiological testosterone replacement on trabecular structure and gene expression in the bone.
    Matched MeSH terms: Tibia/drug effects; Tibia/metabolism
  19. Fallahiarezoodar A, Abdul Kadir MR, Alizadeh M, Naveen SV, Kamarul T
    Knee Surg Sports Traumatol Arthrosc, 2014 Dec;22(12):3019-27.
    PMID: 25149643 DOI: 10.1007/s00167-014-3227-7
    PURPOSE: Reproducing the femoral rollback through specially designed mechanism in knee implants is required to achieve full knee function in total knee arthroplasty. Most contemporary implants use cam/post mechanism to replace the function of Posterior Cruciate Ligament. This study was aimed to determine the most appropriate cam and post designs to produce normal femoral rollback of the knee.

    METHODS: Three different cams (triangle, ellipse, and circle) and three different posts (straight, convex, concave) geometries were considered in this study and were analysed using kinematic analyses. Femoral rollback did not occur until reaching 50° of knee flexion. Beyond this angle, two of the nine combinations demonstrate poor knee flexion and were eliminated from the study.

    RESULTS: The combination of circle cam with concave post, straight post and convex post showed 15.6, 15.9 and 16.1 mm posterior translation of the femur, respectively. The use of ellipse cam with convex post and straight post demonstrated a 15.3 and 14.9 mm femoral rollback, whilst the combination of triangle cam with convex post and straight post showed 16.1 and 15.8 mm femoral rollback, respectively.

    CONCLUSION: The present study demonstrates that the use of circle cam and convex post created the best femoral rollback effect which in turn produces the highest amount of knee flexion. The findings of the study suggest that if the design is applied for knee implants, superior knee flexion may be possible for future patients.

    LEVEL OF EVIDENCE: IV.

    Matched MeSH terms: Tibia/physiopathology; Tibia/surgery
  20. Eshraghi A, Abu Osman NA, Karimi M, Gholizadeh H, Soodmand E, Wan Abas WA
    PLoS One, 2014;9(5):e96988.
    PMID: 24865351 DOI: 10.1371/journal.pone.0096988
    Prosthetic suspension system is an important component of lower limb prostheses. Suspension efficiency can be best evaluated during one of the vital activities of daily living, i.e. walking. A new magnetic prosthetic suspension system has been developed, but its effects on gait biomechanics have not been studied. This study aimed to explore the effect of suspension type on kinetic and kinematic gait parameters during level walking with the new suspension system as well as two other commonly used systems (the Seal-In and pin/lock). Thirteen persons with transtibial amputation participated in this study. A Vicon motion system (six cameras, two force platforms) was utilized to obtain gait kinetic and kinematic variables, as well as pistoning within the prosthetic socket. The gait deviation index was also calculated based on the kinematic data. The findings indicated significant difference in the pistoning values among the three suspension systems. The Seal-In system resulted in the least pistoning compared with the other two systems. Several kinetic and kinematic variables were also affected by the suspension type. The ground reaction force data showed that lower load was applied to the limb joints with the magnetic suspension system compared with the pin/lock suspension. The gait deviation index showed significant deviation from the normal with all the systems, but the systems did not differ significantly. Main significant effects of the suspension type were seen in the GRF (vertical and fore-aft), knee and ankle angles. The new magnetic suspension system showed comparable effects in the remaining kinetic and kinematic gait parameters to the other studied systems. This study may have implications on the selection of suspension systems for transtibial prostheses. Trial registration: Iranian Registry of Clinical Trials IRCT2013061813706N1.
    Matched MeSH terms: Tibia/injuries; Tibia/surgery*
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links