Displaying publications 21 - 32 of 32 in total

Abstract:
Sort:
  1. Rauf A, Razak M, Ismail M
    Med J Malaysia, 1998 Sep;53 Suppl A:107-14.
    PMID: 10968192
    From January 1992 to January 1996, thirty-three patients with persistent clinical and functional knee instability due to anterior cruciate insufficiency underwent ACL reconstruction using central third of the bone-patellar ligament-bone graft. An early experience was presented with average follow-up of 9.8 months (range six to thirty-three months). There thirty-two male and two females. The average age was twenty-four months. Eighty-three percent were involved in football injury. The average time interval from initial injury to operation was twenty-five months. Majority presented with knee pain and giving way. Meniscal tear was the commonest associated injury in more than 70 percent; the lateral meniscus being more frequently injured (42 percent) than the medial meniscus (15 percent). Using modified criteria by Paterson and Trickey (1986), nine patients (27 percent) had good results and twenty-two (67 percent) has satisfactory results. Two patients (6 percent) who had post-operative infection were graded as poor. Functional stability was achieved in twenty-eight (85 percent) and instability persisted in five (15 percent). There were marked clinical improvement in the Lachman and anterior drawer grading post-operatively. The accelerated rehabilitation programme was effective in obtaining early clinical improvement and in reducing post-operative knee stiffness.
    Matched MeSH terms: Joint Instability/surgery
  2. Bashaireh KM, Yabroudi MA, Nawasreh ZH, Al-Zyoud SM, Bashir NB, Aleshawi AJ, et al.
    Knee, 2020 Aug;27(4):1205-1211.
    PMID: 32711883 DOI: 10.1016/j.knee.2020.05.003
    BACKGROUND: A high incidence of joint laxity has been reported among Asians compared with Western populations, but clear differences between more specific ethnic populations have not been established. This study aimed to determine the average knee laxity in the Malaysian and Jordanian populations.

    METHODS: Jordanian and Malaysian medical students from our institution were invited to participate in the study. General demographic data and factors affecting joint laxity were obtained from each participant using a printed questionnaire. Both knees were examined using the anterior drawer test while in 90° of flexion. Knee laxity was measured by three separate independent investigators through a knee laxity tester.

    RESULTS: One hundred and eighty-six participants (95 females) were enrolled in the study. Among them, 108 Malaysians participated. The Jordanians had significantly higher knee laxity in both knees compared with the Malaysians. The mean average right knee laxity for Jordanians was 2.98 mm vs. 2.72 mm for Malaysians (P = 0.005). Similarly, the mean average left knee laxity for Jordanians was 2.95 mm, while for Malaysians, it was 2.62 mm (P = 0.0001). Furthermore, smokers had significantly more laxity in both knees. After performing a multivariate linear regression analysis for all factors, race was the only independent factor that affected knee laxity in both knees.

    CONCLUSIONS: Race is directly associated with knee laxity. Jordanians tend to have more laxity in knee joints compared with Malaysians. Larger multi-center and genetic studies are recommended to establish the racial differences between different ethnic groups.

    Matched MeSH terms: Joint Instability/ethnology*
  3. Baharuddin MY, Salleh ShH, Hamedi M, Zulkifly AH, Lee MH, Mohd Noor A, et al.
    Biomed Res Int, 2014;2014:478248.
    PMID: 24800230 DOI: 10.1155/2014/478248
    Stress shielding and micromotion are two major issues which determine the success of newly designed cementless femoral stems. The correlation of experimental validation with finite element analysis (FEA) is commonly used to evaluate the stress distribution and fixation stability of the stem within the femoral canal. This paper focused on the applications of feature extraction and pattern recognition using support vector machine (SVM) to determine the primary stability of the implant. We measured strain with triaxial rosette at the metaphyseal region and micromotion with linear variable direct transducer proximally and distally using composite femora. The root mean squares technique is used to feed the classifier which provides maximum likelihood estimation of amplitude, and radial basis function is used as the kernel parameter which mapped the datasets into separable hyperplanes. The results showed 100% pattern recognition accuracy using SVM for both strain and micromotion. This indicates that DSP could be applied in determining the femoral stem primary stability with high pattern recognition accuracy in biomechanical testing.
    Matched MeSH terms: Joint Instability/physiopathology*; Joint Instability/surgery
  4. Dhillon KS
    Malays Orthop J, 2014 Nov;8(3):42-7.
    PMID: 26401236 DOI: 10.5704/MOJ.1411.010
    We are all aware that there has been a dramatic increase in the number of anterior cruciate ligament (ACL) reconstructions that are carried out here in Malaysia as well as around the world. The numbers of ACL injuries have undoubtedly increased over the years with greater participation of young adults in sporting activities. However it is not certain whether the increase in the numbers of reconstructions can be accounted for by the increasing numbers of ACL injuries. Without doubt commercial interests as well the influence of the biomedical companies have a role to play. In the past the rationale for surgical treatment of an ACL tear was that the ACL is vital for knee function and that in the long term ACL deficiency will lead to more injuries of the meniscus and more degeneration of the joint. This belief was prevalent because the natural history of an ACL deficient knee and the ultimate outcome of reconstruction of the ACL were both not known. However in recent years a substantial amount of research has been published, which has elucidated the natural history of ACL deficient knees as well as the long term outcome of reconstruction of the ACL.
    Matched MeSH terms: Joint Instability
  5. Quan Fu Gan, Pooi Pooi Leong, Soon Keng Cheong, Chai Nien Foo
    MyJurnal
    Ankle sprain is one of the most common injuries associated with physical activities. Complications including pain and ankle instability are associated with decreased physical activity, reduced sport performance, and increased risk of recurrent ankle injury leading to detrimental effect on activities of daily living. Current management of ankle sprain can be conservative or surgical for serious cases. However, long healing period is required for conservative management in addition to its side effects and the risk of post-operative complications for surgical management. Due to the current challenges and setbacks faced by existing intervention, this paper aims to generate ideas in incorporat- ing regenerative medicine as an intervention for ankle sprain. This review will provide a brief review on the existing management for ankle sprain along with some history, application and the potential of regenerative medicine in speeding up the healing process of ankle sprains.
    Matched MeSH terms: Joint Instability
  6. Dhillon KS
    Malays Orthop J, 2015 Mar;9(1):47-52.
    PMID: 28435599 DOI: 10.5704/MOJ.1503.008
    We are all aware that there has been a dramatic increase in the number of anterior cruciate ligament (ACL) reconstructions that are carried out here in Malaysia as well as around the world. The numbers of ACL injuries have undoubtedly increased over the years with greater participation of young adults in sporting activities. However it is not certain whether the increase in the numbers of reconstructions can be accounted for by the increasing numbers of ACL injuries. Without doubt commercial interests as well the influence of the biomedical companies have a role to play. In the past the rational for surgical treatment of an ACL tear was that the ACL is vital for knee function and that in the long term ACL deficiency will lead to more injuries of the meniscus and more degeneration of the joint. This belief was prevalent because the natural history of an ACL deficient knee was not known although the ultimate outcome of reconstruction of the ACL was not known either. However in past few years a substantial amount research has been published, which has elucidated the natural history of ACL deficient knees as well as the long term outcome of reconstruction of the ACL.
    Matched MeSH terms: Joint Instability
  7. Kamarul T, Razif A, Elina R, Azura M, Chan KY
    Malays Orthop J, 2007;1(2):11-16.
    MyJurnal
    A study to determine average knee laxity in the Malaysian population and how it affects daily living was conducted at the University Malaya Medical Centre between January and April 2004. Fifty two male and 76 female subjects were recruited for this study, all of whom were healthy volunteers with no ambulatory problems. Side to side knee laxity testing was performed using a KT-1000 arthrometer. Significant differences in knee laxity were noted among different races and between sexes. For instance, overall, Chinese and female study participants had higher knee laxity: (left knee, 2.17 mm (SD=1.30) and right knee was 2.88 mm (SD= 1.51)). On average, the difference between knees was 0.70 ± 1.26 mm (less than 1 mm) which is a smaller variation than reported in previous studies which suggested 3 mm. Despite finding knee laxity ranging from 0 to 8mm, no correlations were found between Lysholm, IKDC and Tegner knee outcome scores and the degree of knee laxity. No other predictors such as height, weight and age correlated with levels of knee laxity. We therefore conclude that knee laxity is a common occurrence in the normal population and is therefore not suitable as a sole predictor of knee function and should not be used as the only criteria for surgical intervention.
    Study site: Orthopedic clinic, Universiti Malaya Medical Centre (UMMC), Kuala Lumpur, Malaysia
    Matched MeSH terms: Joint Instability
  8. Kow RY, Mustapha Zakaria Z, Khan ESKM, Low C
    J Orthop Case Rep, 2019 3 28;8(6):65-67.
    PMID: 30915298 DOI: 10.13107/jocr.2250-0685.1262
    Introduction: Fracture of the ulnar coronoid process is uncommon. It is commonly associated with posterior dislocation of the elbow, but it may also present as an isolated fracture. In general, all ulnar coronoid process fractures with elbow joint instability and large fracture fragments are fixed surgically. We report two cases of the rare isolated Regan-Morrey type III ulnar coronoid process fractures and their outcomes.

    Case Report: Case Report 1: Mrs P, a 27-year-old right-hand dominant female, was involved in a motor vehicle accident (MVA) and sustained an isolated Regan-Morrey type III ulnar coronoid process fracture. In view of the large coronoid process fragment causing elbow joint instability, she underwent an open reduction and internal fixation when the elbow swelling had subsided. An anterior approach was used to identify the fracture fragment and it was fixed with two half-threaded cancellous lag screws with washers to achieve an anatomical reduction. Postoperatively, she recovered with excellent outcome based on the Mayo elbow performance score (MEPS).Case Report 2: Mr M, a 23-year-old right-hand dominant gentleman, was involved in a MVA and sustained an isolated Regan-Morrey type III ulnar coronoid process fracture. During examination under general anesthesia, passive range of the movement of his right elbow was noted to be <90°due to the impaction of the fracture fragment. An open reduction through an anterior approach was performed and Kirschner wires were inserted to fix the coronoid process fracture. Kirschner wires were opted for the ease of post-operative removal as the patient was not keen to have a retained implant after recovery. He recovered with good outcome based on the MEPS.

    Conclusion: Isolated fracture of the ulnar coronoid process is rare. Open reduction and internal fixation is mandatory for patients with coronoid process fracture and unstable elbow joint to achieve good functional outcomes.

    Matched MeSH terms: Joint Instability
  9. Thangaraju S, Tauber M, Habermeyer P, Martetschläger F
    Knee Surg Sports Traumatol Arthrosc, 2019 Dec;27(12):3797-3802.
    PMID: 30900030 DOI: 10.1007/s00167-019-05482-7
    PURPOSE: Arthroscopic-assisted stabilization surgery for acute acromioclavicular joint (ACJ) disruption shows excellent and reliable clinical outcomes. However, characteristic complications such as fracture of the clavicle and coracoid have been reported to occur during the early post-operative period. The main goal of this study was to highlight the occurrence of fractures as a late post-operative complication. The secondary goals were to describe possible fracture morphologies and treatment outcomes.

    METHOD: Patient records from a single surgery centre were searched for all patients presenting with late fracture complication following arthroscopically assisted acromioclavicular stabilization. Medical reports including the operative notes and pre- and post-operative X-rays were reviewed. A telephone interview was conducted with each patient to access the American Shoulder and Elbow Surgeons shoulder score.

    RESULTS: A total of four patients presented with late fracture complication following arthroscopic-assisted ACJ stabilization surgery. All patients were males and presented following trauma at a median duration of 19.5 months after the index surgery. Fracture morphology differed between patients; the treatment was conservative in three patients, while one patient underwent osteosynthesis.

    CONCLUSION: Traumatic peri-implant fractures can occur, even 2 years after arthroscopically assisted ACJ reconstruction. This needs to be considered when planning for surgical intervention in acute ACJ disruption, especially in a high-risk population.

    LEVEL OF EVIDENCE: Therapeutic study, Level IV.

    Matched MeSH terms: Joint Instability/surgery*
  10. Arif M, Sivananthan S, Choon DS
    J Orthop Surg (Hong Kong), 2004 Jun;12(1):25-30.
    PMID: 15237118
    To report the outcome of revised total hip arthroplasty procedures involving an anterior cortical window, extensive strut allografts, and an Exeter impaction graft.
    Matched MeSH terms: Joint Instability/prevention & control
  11. Alizadeh M, Kadir MR, Fadhli MM, Fallahiarezoodar A, Azmi B, Murali MR, et al.
    J Orthop Res, 2013 Sep;31(9):1447-54.
    PMID: 23640802 DOI: 10.1002/jor.22376
    Posterior instrumentation is a common fixation method used to treat thoracolumbar burst fractures. However, the role of different cross-link configurations in improving fixation stability in these fractures has not been established. A 3D finite element model of T11-L3 was used to investigate the biomechanical behavior of short (2 level) and long (4 level) segmental spine pedicle screw fixation with various cross-links to treat a hypothetical L1 vertebra burst fracture. Three types of cross-link configurations with an applied moment of 7.5 Nm and 200 N axial force were evaluated. The long construct was stiffer than the short construct irrespective of whether the cross-links were used (p < 0.05). The short constructs showed no significant differences between the cross-link configurations. The XL cross-link provided the highest stiffness and was 14.9% stiffer than the one without a cross-link. The long construct resulted in reduced stress to the adjacent vertebral bodies and screw necks, with 66.7% reduction in bending stress on L2 when the XL cross-link was used. Thus, the stability for L1 burst fracture fixation was best achieved by using long segmental posterior instrumentation constructs and an XL cross-link configuration. Cross-links did not improved stability when a short structure was used.
    Matched MeSH terms: Joint Instability/prevention & control
  12. Tan SY, Leong WH, Ong LH, Mohd-Amin MZ
    Malays Orthop J, 2020 Jul;14(2):138-140.
    PMID: 32983390 DOI: 10.5704/MOJ.2007.023
    Lateral femoral wall perforation is a rare intra-operative complication in anterior cruciate ligament (ACL) reconstruction surgery. However, it can be challenging to manage if it occurs. We share our experience on lateral femoral wall perforation managed by a large fragment washer. A 25-year-old man with right ACL injury presented with knee instability despite physiotherapy. Anterior drawer test (ADT) and Lachman test were grade 3, glide on pivot shift was positive. During ACL reconstruction, the lateral femoral wall was perforated. Due to unavailability of the rescue endobutton and budget constraint, we passed the endobutton through a washer and allowed it to sit on the washer over the lateral femoral wall. ADT and Lachman test on post-operative 6, 12 and 24 weeks were grade 1, with a negative pivot shift test. Lysholm knee score improved from 69 pre-operatively to 98 post-operatively. Conventionally, lateral femoral wall perforation can be managed by rescue endobutton, or screw and washer post technique. As this complication is rare, the rescue endobutton may not be available at all times, and the cost of the implant is also another important factor to consider. A washer can be used as an alternative technique to manage lateral femoral wall perforation in ACL reconstruction as it is not only cost-effective but also provides stable fixation with good functional outcome.
    Matched MeSH terms: Joint Instability
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links