Displaying publications 21 - 40 of 304 in total

Abstract:
Sort:
  1. Gold nanoparticles-based photothermal therapy for breast cancer
    Dheyab MA, Aziz AA, Khaniabadi PM, Jameel MS, Oladzadabbasabadi N, Rahman AA, et al.
    Photodiagnosis Photodyn Ther, 2023 Jun;42:103312.
    PMID: 36731732 DOI: 10.1016/j.pdpdt.2023.103312
    AuNPs-mediated photothermal therapy (PTT) is gaining popularity in both laboratory research and medical applications. It has proven clear advantages in breast cancer therapy over conventional thermal ablation because of its easily-tuned features of irradiation light with inside hyperthermia ability. Notwithstanding this significant progress, the therapeutic potential of AuNPs-mediated PTT in cancer treatments is still impeded by several challenges, including inherent non-specificity, low photothermal conversion effectiveness, and the limitation of excitation light tissue penetration. Given the rapid progress of AuNPs-mediated PTT, we present a comprehensive overview of significant breakthroughs in the recent advancements of AuNPs for PTT, focusing on breast cancer cells. With the improvement of chemical synthesis technology, AuNPs of various sizes and shapes with desired properties can be synthesized, allowing breast cancer targeting and treatment. In this study, we summarized the different sizes and features of four major types of AuNPs in this review: Au nanospheres, Au nanocages, Au nanoshells, and Au nanorods, and explored their benefits and drawbacks in PTT. We also discussed the diagnostic, bioconjugation, targeting, and cellular uptake of AuNPs, which could improve the performance of AuNP-based PTT. Besides that, potential challenges and future developments of AuNP-mediated PTT for clinical applications are discussed. AuNP-mediated PTT is expected to become a highly promising avenue in cancer treatment in the near future.
    Matched MeSH terms: Gold/chemistry
  2. Colloidal surface-enhanced Raman spectroscopic study of grouper epidermal mucus using acidified sodium sulphate as the aggregating agent
    Leong N, Yaacob MH, Md Zain AR, Tengku Abdul Aziz TH, Christianus A, Chong CM, et al.
    Spectrochim Acta A Mol Biomol Spectrosc, 2024 Apr 15;311:123974.
    PMID: 38377639 DOI: 10.1016/j.saa.2024.123974
    Fish epidermal mucus is an important reservoir of antipathogenic compounds which serves as the first line of the immune defence. Despite its significant role in the physiology and health of fish, detailed profiling of fish epidermal mucus has yet to be explored. Therefore, this study investigates a label-free colloidal surface-enhanced Raman spectroscopic (SERS) method for profiling grouper mucus. Gold nanoparticles were first synthesised using the standard citrate reduction and characterised using ultraviolet-visible spectroscopy, transmission electron microscopy and dynamic light scattering. The influence of acidified sodium sulphate (Na2SO4) at pH 3 as the aggregating agent on the enhancement of the SERS spectrum of different analyte samples including rhodamine 6G (R6G) dye, lysozyme solution and hybrid grouper (Epinephelus fuscoguttatus × Epinephelus lanceolatus) mucus was observed. Based on the results, an optimal Na2SO4 concentration of 1 M was recorded to achieve the highest enhancement of the SERS signal for R6G and grouper mucus, while the optimal concentration for lysozyme was 0.1 M. The results indicated a higher degree of aggregation induced by lysozyme than R6G and grouper mucus. A few overlapping peaks of the SERS spectra of lysozyme and grouper mucus made it possible to confirm the presence of lysozyme as potential biomarkers.
    Matched MeSH terms: Gold/chemistry
  3. Fulltext Cytotoxicity of Plant-Mediated Synthesis of Metallic Nanoparticles: A Systematic Review
    Hanan NA, Chiu HI, Ramachandran MR, Tung WH, Mohamad Zain NN, Yahaya N, et al.
    Int J Mol Sci, 2018 Jun 11;19(6).
    PMID: 29891772 DOI: 10.3390/ijms19061725
    In the field of medicine, nanomaterials, especially those derived using the green method, offer promise as anti-cancer agents and drug carriers. However, the biosafety of metallic nanoparticles used as anti-cancer agents remains a concern. The goal of this systematic review was to compare the cytotoxicity of different plant-mediated syntheses of metallic nanoparticles based on their potency, therapeutic index, and cancer cell type susceptibility in the hopes of identifying the most promising anti-cancer agents. A literature search of electronic databases including Science Direct, PubMed, Springer Link, Google Scholar, and ResearchGate, was conducted to obtain research articles. Keywords such as biosynthesis, plant synthesis, plant-mediated, metallic nanoparticle, cytotoxicity, and anticancer were used in the literature search. All types of research materials that met the inclusion criteria were included in the study regardless of whether the results were positive, negative, or null. The therapeutic index was used as a safety measure for the studied compound of interest. Data from 76 selected articles were extracted and synthesised. Seventy-two studies reported that the cytotoxicity of plant-mediated synthesis of metallic nanoparticles was time and/or dose-dependent. Biosynthesised silver nanoparticles demonstrated higher cytotoxicity potency compared to gold nanoparticles synthesised by the same plants (Plumbago zeylanica, Commelina nudiflora, and Cassia auriculata) irrespective of the cancer cell type tested. This review also identified a correlation between the nanoparticle size and morphology with the potency of cytotoxicity. Cytotoxicity was found to be inversely proportional to nanoparticle size. The plant-mediated syntheses of metallic nanoparticles were predominantly spherical or quasi-spherical, with the median lethal dose of 1⁻20 µg/mL. Nanoparticles with other shapes (triangular, hexagonal, and rods) were less potent. Metallic nanoparticles synthesised by Abutilon inducum, Butea monosperma, Gossypium hirsutum, Indoneesiella echioides, and Melia azedarach were acceptably safe as anti-cancer agents, as they had a therapeutic index of >2.0 when tested on both cancer cells and normal human cells. Most plant-mediated syntheses of metallic nanoparticles were found to be cytotoxic, although some were non-cytotoxic. The results from this study suggest a focus on a selected list of potential anti-cancer agents for further investigations of their pharmacodynamic/toxicodynamic and pharmacokinetic/toxicokinetic actions with the goal of reducing the Global Burden of Diseases and the second leading cause of mortality.
    Matched MeSH terms: Gold/toxicity*
  4. Fulltext Gold nanoparticle trapping and delivery for therapeutic applications
    Aziz MS, Suwanpayak N, Jalil MA, Jomtarak R, Saktioto T, Ali J, et al.
    Int J Nanomedicine, 2012;7:11-7.
    PMID: 22275818 DOI: 10.2147/IJN.S27417
    A new optical trapping design to transport gold nanoparticles using a PANDA ring resonator system is proposed. Intense optical fields in the form of dark solitons controlled by Gaussian pulses are used to trap and transport nanoscopic volumes of matter to the desired destination via an optical waveguide. Theoretically, the gradient and scattering forces are responsible for this trapping phenomenon, where in practice such systems can be fabricated and a thin-film device formed on the specific artificial medical materials, for instance, an artificial bone. The dynamic behavior of the tweezers can be tuned by controlling the optical pulse input power and parameters of the ring resonator system. Different trap sizes can be generated to trap different gold nanoparticles sizes, which is useful for gold nanoparticle therapy. In this paper, we have shown the utility of gold nanoparticle trapping and delivery for therapy, which may be useful for cosmetic therapy and related applications.
    Matched MeSH terms: Gold/chemistry*
  5. Fulltext Electrical characterization of gold-DNA-gold structures in presence of an external magnetic field by means of I-V curve analysis
    Khatir NM, Banihashemian SM, Periasamy V, Ritikos R, Majid WHA, Rahman SA
    Sensors (Basel), 2012;12(3):3578-3586.
    PMID: 22737025 DOI: 10.3390/s120303578
    This work presents an experimental study of gold-DNA-gold structures in the presence and absence of external magnetic fields with strengths less than 1,200.00 mT. The DNA strands, extracted by standard method were used to fabricate a Metal-DNA-Metal (MDM) structure. Its electric behavior when subjected to a magnetic field was studied through its current-voltage (I-V) curve. Acquisition of the I-V curve demonstrated that DNA as a semiconductor exhibits diode behavior in the MDM structure. The current versus magnetic field strength followed a decreasing trend because of a diminished mobility in the presence of a low magnetic field. This made clear that an externally imposed magnetic field would boost resistance of the MDM structure up to 1,000.00 mT and for higher magnetic field strengths we can observe an increase in potential barrier in MDM junction. The magnetic sensitivity indicates the promise of using MDM structures as potential magnetic sensors.
    Matched MeSH terms: Gold/chemistry*
  6. Antiangiogenic properties of nanoparticles: a systematic review
    Saeed BA, Lim V, Yusof NA, Khor KZ, Rahman HS, Abdul Samad N
    Int J Nanomedicine, 2019;14:5135-5146.
    PMID: 31371952 DOI: 10.2147/IJN.S199974
    Nanoparticles appear to be one of the most promising agents that offer efficacy in angiogenesis-related disease therapy. The objective of this research is to systematically review studies that have probed into the effect of nanoparticles on angiogenesis. Selected inclusion criteria were used to extract articles, references that were cited in the initial search were sought to identify more potential articles, and articles that did not meet the inclusion criteria and duplicates were discarded. The spherical shape was shown to be the most common shape employed to investigate the role of nanoparticles in angiogenesis therapy. The size of nanoparticles appears to play a crucial role for efficacy on angiogenesis, in which 20 nm emerged as the preferred size. Gold nanoparticles exhibit the most promise as an antiangiogenesis agent, and the toxicity was adjustable based on the dosages applied.
    Matched MeSH terms: Gold
  7. Synthesis and modelling of the mechanical properties of Ag, Au and Cu nanowires
    Lah NAC, Trigueros S
    Sci Technol Adv Mater, 2019;20(1):225-261.
    PMID: 30956731 DOI: 10.1080/14686996.2019.1585145
    The recent interest to nanotechnology aims not only at device miniaturisation, but also at understanding the effects of quantised structure in materials of reduced dimensions, which exhibit different properties from their bulk counterparts. In particular, quantised metal nanowires made of silver, gold or copper have attracted much attention owing to their unique intrinsic and extrinsic length-dependent mechanical properties. Here we review the current state of art and developments in these nanowires from synthesis to mechanical properties, which make them leading contenders for next-generation nanoelectromechanical systems. We also present theories of interatomic interaction in metallic nanowires, as well as challenges in their synthesis and simulation.
    Matched MeSH terms: Gold
  8. A monoclinic polymorph of [(Z)-N-(3-chloro-phen-yl)-O-methyl-thio-carbamato-κS](tri-phenyl-phosphane-κP)gold(I): crystal structure and Hirshfeld surface analysis
    Yeo CI, Tan SL, Tiekink ER
    Acta Crystallogr E Crystallogr Commun, 2016 Aug 1;72(Pt 8):1068-73.
    PMID: 27536384 DOI: 10.1107/S2056989016010781
    The title compound, [Au(C8H7ClNOS)(C18H15P)], is a monoclinic (P21/n, Z' = 1; form β) polymorph of the previously reported triclinic form (P-1, Z' = 1; form α) [Tadbuppa & Tiekink (2010 ▸). Acta Cryst. E66, m664]. The mol-ecular structures of both forms feature an almost linear gold(I) coordination geometry [P-Au-S = 175.62 (5)° in the title polymorph], being coordinated by thiol-ate S and phosphane P atoms, a Z conformation about the C=N bond and an intra-molecular Au⋯O contact. The major conformational difference relates to the relative orientations of the residues about the Au-S bond: the P-Au-S-C torsion angles are -8.4 (7) and 106.2 (7)° in forms α and β, respectively. The mol-ecular packing of form β features centrosymmetric aggregates sustained by aryl-C-H⋯O inter-actions, which are connected into a three-dimensional network by aryl-C-H⋯π contacts. The Hirshfeld analysis of forms α and β shows many similarities with the notable exception of the influence of C-H⋯O inter-actions in form β.
    Matched MeSH terms: Gold
  9. Fulltext GOLD PRICE FORECASTING USING BOX-JENKINS METHOD
    NUR ATIKAH KHALID, NURFADHLINA ABDUL HALIM
    UMT Journal of Undergraduate Research, 2019;1(3):15-27.
    MyJurnal
    In general, the nature of gold that acts as a hedge against inflation and its stable price over the course of the financial crisis has made it a unique commodity. Priceforecasts are a must for gold producers, investors and central bank to know the current trends in gold prices. Forecasting the future value of a variableis often done with time series analysis method. This study was conducted to determine the best model for forecasting gold commodity prices as well as forecasting world gold commodity prices in 2018 using Box-Jenkins approach. The data used in this study wasobtained from Investing.Com from 2015 until 2017. Thisstudy shows that ARIMA (1,1,1) is the best model to predict gold commodity prices based on Mean Absolute Percentage Error (MAPE). MAPE value for ARIMA (1,1,1) is 0.02%, where this value proves that forecasting using ARIMA (1,1,1) is the best forecasting becauseMAPE value is less than 10%.
    Matched MeSH terms: Gold
  10. Fulltext FACTORS DETERMININGGOLD PRICESIN MALAYSIA
    ANIS MAT DALAM, NOORHASLINDA KULUB ABD RASHID, JAHARUDIN PADLI
    UMT Journal of Undergraduate Research, 2019;1(2):75-82.
    MyJurnal
    Gold is a valuable asset to a country because of itsliquidity.Gold reserve can stabilize the currency in a country.The objectiveof this paper is to identify the factors contributingto the volatility of gold prices, such as Real Malaysia GDP, inflation rates, crude oil pricesand exchange rates. The data was analysed using Autoregressive Distributed Lag (ARDL) approachwith time series data, with 30-year coverage from 1987 to 2016. Findings showed that only Real Malaysia GDP and crudeoil priceswere significantly relatedto gold prices. As a conclusion, this study can beusedas reference byother investors.The author suggests toother researchers to further improve upon this study by adding more variables or diversifying the variables that relate to volatility of gold prices
    Matched MeSH terms: Gold
  11. Influence of natural convection on gold nanorods-assisted photothermal treatment of bladder cancer in mice
    Ooi EH, Popov V, Alfano M, Cheong JKK
    Int J Hyperthermia, 2020;37(1):634-650.
    PMID: 32538190 DOI: 10.1080/02656736.2020.1771437
    Background: The thermally-induced urine flow can generate cooling that may alter the treatment outcome during hyperthermic treatments of bladder cancer. This paper investigates the effects of natural convection inside the bladder and at skin surface during gold nanorods (GNR) - assisted photothermal therapy (PTT) of bladder cancer in mice. Methods: 3D models of mouse bladder at orientations corresponding to the mouse positioned on its back, its side and its abdomen were examined. Numerical simulations were carried out for GNR volume fractions of 0.001, 0.005 and 0.01% and laser power of 0.2 and 0.3 W. Results: The obtained results showed that cooling due to natural convection inside the bladder and above the skin depends on the mouse orientation. For a mouse positioned on its back, on its side or on its abdomen, the maximum temperature achieved inside the tumour at 0.001% GNR volume fraction and 0.2 W laser power was 55.2°C, 50.0°C and 52.2°C, respectively compared to 56.8°C when natural convection was not considered. The average thermal gradients when natural convection was considered were also lower, suggesting a more homogenous temperature distribution. Conclusions: Natural convection inside the bladder can be beneficial but also detrimental to GNR-assisted PTT depending on the level of heating. At low levels of heating due to low GNR volume fraction and/or laser power, flow inside the bladder may dissipate heat from the targeted tissue; making the treatment ineffective. At high levels of heating due to high GNR volume fraction and/or laser power, cooling may prevent excessive thermal damage to surrounding tissues.
    Matched MeSH terms: Gold
  12. Fulltext Preliminary characterization study based on cyclic voltammetry and reliability of a fabricated Au/Ti microfluidic three-electrode sensor
    Hamzah, I.H., Sidek, O., Abd Manaf, A.
    ASM Science Journal, 2010;4(2):142-148.
    MyJurnal
    A preliminary study was carried out to fabricate a three electrode system based on electrochemical sensoring. The cyclic voltammetry (CV) technique was chosen to select the type of metal suitable for evaporation and to compare the results produced from the fabricated gold electrode with the conventional macro-electrode system. The methodology and apparatus used involved low cost apparatus and methodology such as soft lithography, wet-etching, thermal evaporation, direct current sputtering, polymethylmethacrylate moulding and polydimethylsiloxane coating. The experiment was conducted at a fixed scan rate of 100 mV/s by using 0.01 M K3Fe(CN)6 in 0.1M KCl and well known method using Randles-Sevcik equation, peak current ratio and voltage separation was used to analyze the characterization on the fabricated sensors. Electrodes of 6.5 mm2 and 0.26 mm2 were fabricated to prove the adsorption effect of the reactant and the influence of the electrode area on the value of the peak current. CV analysis proved that the fabricated sensor was reliable for a range of 24 h at 25ºC room temperature.
    Matched MeSH terms: Gold
  13. Fulltext Determination of gold coating thickness measurement by using EDXRF
    Meor Yusoff, M.S., Masliana Muslimin, Fadlullah Jili Fursani
    Journal of Nuclear and Related Technologies, 2005;2005(2):57-62.
    MyJurnal
    The paper relates a study on the development of an analysis procedure for measuring the gold coating thickness using EDXRF technique. Gold coating thickness was measured by relating the counts under the Au Lα peak its thickness value. In order to get a reasonably accurate result, a calibration graph was plotted using five gold-coated reference standards of different thicknesses. The calibration graph shows a straight line for thin coating measurement until 0.9μm. Beyond this the relationship was not linear and this may be resulted from the selfabsorption effect. Quantitative analysis was also performed on two different samples of goldcoated jewelry and a phone connector. Result from the phone connector analysis seems to agree with the manufacturer’s gold coating value. From the analysis of gold-coated jewelry it had been able to differentiate the two articles as gold wash and gold electroplated.
    Matched MeSH terms: Gold
  14. Multifunction interferometry using the electron mobility visibility and mean free path relationship
    Pornsuwancharoen N, Youplao P, Amiri IS, Aziz MS, Tran QL, Ali J, et al.
    Microsc Res Tech, 2018 Aug;81(8):872-877.
    PMID: 29737596 DOI: 10.1002/jemt.23049
    A conventional Michelson interferometer is modified and used to form the various types of interferometers. The basic system consists of a conventional Michelson interferometer with silicon-graphene-gold embedded between layers on the ports. When light from the monochromatic source is input into the system via the input port (silicon waveguide), the change in optical path difference (OPD) of light traveling in the stacked layers introduces the change in the optical phase, which affects to the electron mean free path within the gold layer, induces the change in the overall electron mobility can be seen by the interferometer output visibility. Further plasmonic waves are introduced on the graphene thin film and the electron mobility occurred within the gold layer, in which the light-electron energy conversion in terms of the electron mobility can be observed, the gold layer length is 100 nm. The measurement resolution in terms of the OPD of
    ∼
    50 nm is achieved. In applications, the outputs of the drop port device of the modified Michelson interferometer can be arranged by the different detectors, where the polarized light outputs, the photon outputs, the electron spin outputs can be obtained by the interference fringe visibility, mobility visibility and the spin up-down splitting output energies. The modified Michelson interferometer theory and the detection schemes are given in details.
    Matched MeSH terms: Gold
  15. Non-seismic geophysical prospecting model of beiya gold mine in western yunnan province
    Jian Yang, Qiao Wang, Shengxian Liang, Jing Guo, Muhammad Aqeel Ashraf
    Sains Malaysiana, 2017;46:2149-2162.
    According to the basic rules and characteristics of the gold-polymetallic deposits of Beiya gold mine area in terms of mineralization and ore controlling, it is concluded that skarn deposit is the main ore deposit type in this area and the geological conditions are analyzed by the statistics of the physical parameters. Then, the tectonic, rocks, stratum, ore geophysical models have been treated by the forward modeling numerical simulation and the results are analyzed comprehensively. Based on the forward modeling results, combined with the relevant physical differences, the principle and exploration method test and research for the comprehensive geophysical exploration technology has been carried out, covering the induced polarization and magnetic prospecting for the ore body as well as the indirect geophysical exploration method by means of plane gravity data, audio-magnetotelluric sounding for rock mass and tectonics, the mineralization mode-physical forward modeling - geophysical exploration mode has been established and good results have been achieved. Therefore, a location forecast method has been put forward for the concealed skarn type Fe-Au deposit which is adaptive to the mineralized geological background of Beiya and other similar areas.
    Matched MeSH terms: Gold
  16. Microbe-mediated sustainable bio-recovery of gold from low-grade precious solid waste: A microbiological overview
    Rana S, Mishra P, Wahid ZA, Thakur S, Pant D, Singh L
    J Environ Sci (China), 2020 Mar;89:47-64.
    PMID: 31892401 DOI: 10.1016/j.jes.2019.09.023
    In an era of electronics, recovering the precious metal such as gold from ever increasing piles of electronic-wastes and metal-ion infested soil has become one of the prime concerns for researchers worldwide. Biological mining is an attractive, economical and non-hazardous to recover gold from the low-grade auriferous ore containing waste or soil. This review represents the recent major biological gold retrieval methods used to bio-mine gold. The biomining methods discussed in this review include, bioleaching, bio-oxidation, bio-precipitation, bio-flotation, bio-flocculation, bio-sorption, bio-reduction, bio-electrometallurgical technologies and bioaccumulation. The mechanism of gold biorecovery by microbes is explained in detail to explore its intracellular mechanistic, which help it withstand high concentrations of gold without causing any fatal consequences. Major challenges and future opportunities associated with each method and how they will dictate the fate of gold bio-metallurgy from metal wastes or metal infested soil bioremediation in the coming future are also discussed. With the help of concurrent advancements in high-throughput technologies, the gold bio-exploratory methods will speed up our ways to ensure maximum gold retrieval out of such low-grade ores containing sources, while keeping the gold mining clean and more sustainable.
    Matched MeSH terms: Gold
  17. Fulltext Draft Genome Sequence of Arsenic-Resistant Microbacterium sp. Strain SZ1 Isolated from Arsenic-Bearing Gold Ores
    Mohd Bahari Z, Ibrahim Z, Jaafar J, Shahir S
    Genome Announc, 2017 Oct 26;5(43).
    PMID: 29074663 DOI: 10.1128/genomeA.01183-17
    Microbacterium sp. strain SZ1 isolated from gold ores of a Malaysia gold mine was found to be highly resistant to arsenic. Here, we report the draft genome sequence of SZ1, which may provide further insights into understanding its arsenic resistance mechanism. In this draft genome, a complete set of ars operons and two additional scattered ars genes were encoded.
    Matched MeSH terms: Gold
  18. Zinc oxide and gold textured Janus nanowire integration in an impedimetric sensor for leptospirosis DNA-biomarker recognition
    Haarindraprasad R, Gopinath SCB, Veeradassan P
    Biotechnol Appl Biochem, 2022 Dec;69(6):2698-2712.
    PMID: 34997977 DOI: 10.1002/bab.2316
    A "Janus particle" refers to the production of two materials in a single system and shows a difference in physical characteristics, and two surfaces participate in the formation with different chemistries. This research generated the Janus using a hybrid of zinc oxide (ZnO) and gold (Au) on the sensor surface toward making high-performance DNA sensors. The Janus ZnO/Au-textured film was synthesized via the one-step sol-gel method, which involves a suitable ratio of a mixture of ZnO sol seed solution. The synthesized Janus ZnO/Au-textured film undergoes a low-temperature aqueous hydrothermal route to synthesize quasi-one-dimensional nanowires. The average grain size in the Janus ZnO/Au nanotextured wire was 41.60 nm. The fabricated nanotextured wire was further optimized by tuning the thickness and characterized by XRD and high-resolution microscopy. Electrical characterization was conducted on the Janus ZnO/Au nanotextured wire coupled with an interdigitated electrode sensor to detect the specific leptospirosis DNA strand. The generated device is capable of detecting lower DNA concentration at 1 × 10-13 M with a sensitivity of 8.54 MΩ M-1 cm-2 . The high performance is attained on linear concentrations of 10-6 -10-13 M with the determination coefficient, "I = 135437.63C-3609.07" R2 = 0.9551. A potential strategy is proposed as a base for developing different high-performance sensors.
    Matched MeSH terms: Gold
  19. Fulltext Gold nanorods assisted photothermal therapy of bladder cancer in mice: A computational study on the effects of gold nanorods distribution at the centre, periphery, and surface of bladder cancer
    Cheong JK, Ooi EH, Chiew YS, Menichetti L, Armanetti P, Franchini MC, et al.
    Comput Methods Programs Biomed, 2023 Mar;230:107363.
    PMID: 36720181 DOI: 10.1016/j.cmpb.2023.107363
    BACKGROUND AND OBJECTIVES: Gold nanorod-assisted photothermal therapy (GNR-PTT) is a cancer treatment whereby GNRs incorporated into the tumour act as photo-absorbers to elevate the thermal destruction effect. In the case of bladder, there are few possible routes to target the tumour with GNRs, namely peri/intra-tumoural injection and intravesical instillation of GNRs. These two approaches lead to different GNR distribution inside the tumour and can affect the treatment outcome.

    METHODOLOGY: The present study investigates the effects of heterogeneous GNR distribution in a typical setup of GNR-PTT. Three cases were considered. Case 1 considered the GNRs at the tumour centre, while Case 2 represents a hypothetical scenario where GNRs are distributed at the tumour periphery; these two cases represent intratumoural accumulation with different degree of GNR spread inside the tumour. Case 3 is achieved when GNRs target the exposed tumoural surface that is invading the bladder wall, when they are delivered by intravesical instillation.

    RESULTS: Results indicate that for a laser power of 0.6 W and GNR volume fraction of 0.01%, Case 2 and 3 were successful in achieving complete tumour eradication after 330 and 470 s of laser irradiation, respectively. Case 1 failed to form complete tumour damage when the GNRs are concentrated at the tumour centre but managed to produce complete tumour damage if the spread of GNRs is wider. Results from Case 2 also demonstrated a different heating profile from Case 1, suggesting that thermal ablation during GNR-PTT is dependant on the GNRs distribution inside the tumour. Case 3 shows similar results to Case 2 whereby gradual but uniform heating is observed. Cases 2 and 3 show that uniformly heating the tumour can reduce damage to the surrounding tissues.

    CONCLUSIONS: Different GNR distribution associated with the different methods of introducing GNRs to the bladder during GNR-PTT affect the treatment outcome of bladder cancer in mice. Insufficient spreading during intratumoural injection of GNRs can render the treatment ineffective, while administered via intravesical instillation. GNR distribution achieved through intravesical instillation present some advantages over intratumoural injection and is worthy of further exploration.

    Matched MeSH terms: Gold
  20. Fulltext Unsteady natural convection flow of blood Casson nanofluid (Au) in a cylinder: nano-cryosurgery applications
    Azmi WFW, Mohamad AQ, Jiann LY, Shafie S
    Sci Rep, 2023 Apr 09;13(1):5799.
    PMID: 37032402 DOI: 10.1038/s41598-023-30129-6
    Nano-cryosurgery is one of the effective ways to treat cancerous cells with minimum harm to healthy adjacent cells. Clinical experimental research consumes time and cost. Thus, developing a mathematical simulation model is useful for time and cost-saving, especially in designing the experiment. Investigating the Casson nanofluid's unsteady flow in an artery with the convective effect is the goal of the current investigation. The nanofluid is considered to flow in the blood arteries. Therefore, the slip velocity effect is concerned. Blood is a base fluid with gold (Au) nanoparticles dispersed in the base fluid. The resultant governing equations are solved by utilising the Laplace transform regarding the time and the finite Hankel transform regarding the radial coordinate. The resulting analytical answers for velocity and temperature are then displayed and visually described. It is found that the temperature enhancement occurred by arising nanoparticles volume fraction and time parameter. The blood velocity increases as the slip velocity, time parameter, thermal Grashof number, and nanoparticles volume fraction increase. Whereas the velocity decreases with the Casson parameter. Thus, by adding Au nanoparticles, the tissue thermal conductivity enhanced which has the consequence of freezing the tissue in nano-cryosurgery treatment significantly.
    Matched MeSH terms: Gold
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links