Displaying publications 21 - 40 of 54 in total

Abstract:
Sort:
  1. Cheong CC, Ong SY, Lim SM, Wan A WZ, Mansor M, Chaw SH
    Expert Rev Med Devices, 2023 Feb;20(2):151-160.
    PMID: 36715659 DOI: 10.1080/17434440.2023.2174850
    PURPOSE: A previous study reported a shorter time to tracheal intubation by reducing percentage of glottic opening (POGO) view to <50% when intubating a normal adult airway using the GlidescopeTM blade. We evaluate the efficacy of reducing POGO to <50% when intubating patients with rigid cervical immobilization using CMACTM D blade.

    METHODS: One hundred and four adult patients were randomized to group POGO 100% or POGO <50% . Laryngoscopy was performed by advancing tip of the D blade at vallecula. POGO 100% was achieved by exerting upward force to displace epiglottis until glottic opening from the anterior commissure to inter arytenoid notch. POGO < 50% was acquired by withdrawing the D blade tip dorsally from vallecula. The primary outcome was time to intubation.

    RESULTS: The median time (IQR) to successful intubation was 29 (25-35) seconds for group POGO < 50% and 34 (28-40) seconds for group with POGO 100% (difference in medians, 5 seconds; 95% confidence interval, 2 to 8, p = 0.003). Complications were minor.

    CONCLUSION: Using the CMACTM D blade with a reduced POGO in patients with cervical spine immobilization resulted in faster tracheal intubation.

    TRIAL REGISTRATION: The trial is registered at ClinicalTrial.gov (CT.gov identifier: NCT04833166).

    Matched MeSH terms: Cervical Vertebrae
  2. Che Omar S, Hardy Mohamad Zaini R, Fui Wong T, Nazaruddin W Hassan WM
    Anaesthesiol Intensive Ther, 2021;53(3):241-245.
    PMID: 34006053 DOI: 10.5114/ait.2021.105759
    INTRODUCTION: Airway management in patients with a cervical spine injury is a difficult and challenging task. The aim of this study was to compare the effectiveness of the Air-Q intubating laryngeal airway and the Ambu AuraGain laryngeal mask airway as a conduit for fibreoptic (FO) assisted endotracheal intubation in adult patients with a simulated cervical spine injury.

    MATERIAL AND METHODS: A total of 66 adult patients underwent elective surgery under general anaes-thesia, and they were randomized to two groups: the Air-Q (AQ) group (n = 33) and the Ambu AuraGain (AA) group (n = 33). A simulated cervical spine injury was created using a cervical collar, which was applied after the induction of general anaesthesia. Ease of insertion, time taken for successful insertion, time taken for successful FO guided endotracheal intubation, oropharyngeal leak pressure (OLP), Brimacombe score for FO laryngeal view, post-intubation complications and haemodynamic changes were recorded for both groups.

    RESULTS: The OLP was significantly higher in the AA group than in the AQ group (34.9 ± 6.4 vs. 28.6 ± 7.8 cm H 2 O; P = 0.001). Otherwise, there were no significant differences in the ease of insertion, time taken for successful insertion, time taken for successful FO guided endotracheal intubation, Brimacombe score for FO laryngeal view, haemodynamic parameters or complication rate between the two groups.

    CONCLUSIONS: Air-Q was comparably effective as Ambu AuraGain as a conduit for FO endotracheal intubation in patients with a simulated cervical spine injury; however, Ambu AuraGain has a better seal with significant OLP.

    Matched MeSH terms: Cervical Vertebrae
  3. Mustapha A, Hussain A, Samad SA, Zulkifley MA, Diyana Wan Zaki WM, Hamid HA
    Biomed Eng Online, 2015;14:6.
    PMID: 25595511 DOI: 10.1186/1475-925X-14-6
    Content-based medical image retrieval (CBMIR) system enables medical practitioners to perform fast diagnosis through quantitative assessment of the visual information of various modalities.
    Matched MeSH terms: Cervical Vertebrae/radiography
  4. Rosli R, Abdul Kadir MR, Kamarul T
    Proc Inst Mech Eng H, 2014 Apr;228(4):342-9.
    PMID: 24622982 DOI: 10.1177/0954411914527074
    Anterior corpectomy and reconstruction using a plate with locking screws are standard procedures for the treatment of cervical spondylotic myelopathy. Although adding more screws to the construct will normally result in improved fixation stability, several issues need to be considered. Past reports have suggested that increasing the number of screws can result in the increase in spinal rigidity, decreased spine mobility, loss of bone and, possibly, screw loosening. In order to overcome this, options to have constrained, semi-constrained or hybrid screw and plate systems were later introduced. The purpose of this study is to compare the stability achieved by four and two screws using different plate systems after one-level corpectomy with placement of cage. A three-dimensional finite-element model of an intact C1-C7 segment was developed from computer tomography data sets, including the cortical bone, soft tissue and simulated corpectomy fusion at C4-C5. A spinal cage and an anterior cervical plate with different numbers of screws and plate systems were constructed to a fit one-level corpectomy of C5. Moment load of 1.0 N m was applied to the superior surface of C1, with C7 was fixed in all degrees of freedom. The kinematic stability of a two-screw plate was found to be statistically equivalent to a four-screw plate for one-level corpectomy. Thus, it can be a better option of fusion and infers comparable stability after one-level anterior cervical corpectomy, instead of a four-screw plate.
    Matched MeSH terms: Cervical Vertebrae/surgery*
  5. Ooi EI, Ahem A, Zahidin AZ, Bastion ML
    BMJ Case Rep, 2013;2013.
    PMID: 24334521 DOI: 10.1136/bcr-2013-200632
    This case reports a patient who developed central retinal artery occlusion following spinal surgery in the prone position. When placed in this position, especially as a result of malposition of the head, the patient may develop external compression of the eye which leads to central retinal artery occlusion. Therefore, a special precaution must be given for adequate eye protection during prolonged prone-positioned spine surgery.
    Matched MeSH terms: Cervical Vertebrae/surgery
  6. Ashraf S
    Med J Malaysia, 2012 Apr;67(2):207-9.
    PMID: 22822645 MyJurnal
    Primary intramedullary germinoma arising in the cervical spinal cord is a very rare entity. We present one such case arising in a young man who presented with radiculopathy and myelopathy, which was partially excised. Upon histological confirmation, he was treated successfully with radiotherapy alone. To our knowledge, this is only the second reported case worldwide which is histologically confirmed. Although extremely rare, differential diagnosis for intramedullary spinal cord tumor should include germinoma.
    Matched MeSH terms: Cervical Vertebrae/pathology*
  7. Sheaufung S, Taufiq A, Nawawi O, Naicker MS, Waran V
    J Clin Neurosci, 2009 Apr;16(4):579-81.
    PMID: 19201194 DOI: 10.1016/j.jocn.2008.04.029
    Neurenteric cysts are rare congenital spinal masses that result from the dysgenesis of the endoderm tissue during development. We report a 4-year-old girl who presented with an insidious onset of lower limb paraparesis. An MRI scan revealed a cervicothoracic intradural extramedullary neurenteric cyst at the thoracic T1/T2 level, with marked spinal cord compression. No associated spinal dysraphism was noted. The patient underwent laminotomy and excision of the cyst. She recovered her neurological functions completely post-operatively, and at her six-month follow-up she was asymptomatic without any neurological deficits. We will discuss the pathogenesis, clinical presentation, and neuroradiological findings. We emphasize the value of early surgical intervention and long-term follow-up when this type of lesion is only partially excised.
    Matched MeSH terms: Cervical Vertebrae/pathology
  8. Tan GH, Tan KK, Afian MS, Liew WF, Mohamad AR
    Med J Malaysia, 2005 Jul;60 Suppl C:111-3.
    PMID: 16381295
    We report a case of upper cervical instability associated with Down syndrome to highlight its potential progression to inflict cord compression and the rationale for surgical decompression and extended short segment occipito-axial fusion.
    Matched MeSH terms: Cervical Vertebrae*
  9. Silva JF
    Med J Malaysia, 1978 Jun;32(4):268-73.
    PMID: 732618
    Matched MeSH terms: Cervical Vertebrae/injuries
  10. Saniasiaya J
    Emerg Med J, 2021 Mar;38(3):197-216.
    PMID: 33619156 DOI: 10.1136/emermed-2020-209554
    Matched MeSH terms: Cervical Vertebrae*
  11. Ling TH, Zakaria AF, Abdullah AT
    J Orthop Surg (Hong Kong), 2017 01;25(1):2309499017690459.
    PMID: 28228050 DOI: 10.1177/2309499017690459
    Neck manipulation is associated with spinal cord injury. However, occurrence of such cases is infrequent. This article presents a 33-year-old gentleman who sustained acute tetraplegia after neck manipulation. The aim of this case report is to create awareness that vigorous neck manipulation could cause injury to the spinal cord.
    Matched MeSH terms: Cervical Vertebrae/injuries*
  12. AlDahas A, Devecchi V, Deane JA, Falla D
    PLoS One, 2024;19(5):e0303066.
    PMID: 38728251 DOI: 10.1371/journal.pone.0303066
    INTRODUCTION: People with chronic neck pain (CNP) commonly exhibit a range of physical impairments including cervical proprioceptive deficits. Assessing proprioception using a head mounted laser to assess joint position error (JPE) is a reliable and valid measure. However, the responsiveness of this measure has not been assessed.

    OBJECTIVE: To assess the responsiveness of the measure of cervical JPE after a 4-week home-based neck proprioceptive training intervention in people with CNP.

    DESIGN: An observational study to assess the responsiveness of the measure of cervical JPE.

    METHODS: The JPE test was assessed in people with CNP before and after 4 weeks of neck proprioception training. JPE was assessed as participants performed neck joint position sense tests for flexion, extension, right rotation, and left rotation in sitting and standing which were performed in a random order. Both the absolute and constant JPE were assessed. The intervention consisted of neck repositioning exercises as well as movement sense exercises. Cohen's d effect size was used to assess the internal responsiveness of the JPE test. The Pearson's correlation was used to assess the change of scores of the laser pointer and measures from inertial measurement units (IMUs) (external responsiveness).

    RESULTS: After 4 weeks of proprioception training, JPE assessed in sitting reduced from 2.69◦-3.57◦ to 1.88◦-1.98◦ for flexion, extension, and right rotation with large effect sizes (Cohen's d range: 1.25-2.00). For left rotation, JPE reduced from 3.23◦ to 1.9◦, and the effect size was close to being large (Cohen's d: 0.79). When assessed in standing, JPE reduced from 3.49◦-4.52◦ to 1.5◦-2.33◦ with large effect sizes (Cohen's d range: 0.89-1.25) for flexion, extension, right rotation, and left rotation. Large effect sizes were not observed for the constant JPE when assessed in either sitting or standing. The assessment of the external responsiveness revealed weak correlations between the change of scores obtained from the laser pointer and the IMUs for all movements, apart from the constant JPE in sitting for left rotation, which showed a strong correlation (r = 0.7).

    CONCLUSION: The results of this study showed that the measure of the JPE has sufficient internal responsiveness, however, the external responsiveness was inadequate. Further research is advised.

    Matched MeSH terms: Cervical Vertebrae/physiopathology
  13. Chang KC, Samartzis D, Fuego SM, Dhatt SS, Wong YW, Cheung WY, et al.
    Bone Joint J, 2013 Jul;95-B(7):972-6.
    PMID: 23814252 DOI: 10.1302/0301-620X.95B7.30598
    Transarticular screw fixation with autograft is an established procedure for the surgical treatment of atlantoaxial instability. Removal of the posterior arch of C1 may affect the rate of fusion. This study assessed the rate of atlantoaxial fusion using transarticular screws with or without removal of the posterior arch of C1. We reviewed 30 consecutive patients who underwent atlantoaxial fusion with a minimum follow-up of two years. In 25 patients (group A) the posterior arch of C1 was not excised (group A) and in five it was (group B). Fusion was assessed on static and dynamic radiographs. In selected patients CT imaging was also used to assess fusion and the position of the screws. There were 15 men and 15 women with a mean age of 51.2 years (23 to 77) and a mean follow-up of 7.7 years (2 to 11.6). Stable union with a solid fusion or a stable fibrous union was achieved in 29 patients (97%). In Group A, 20 patients (80%) achieved a solid fusion, four (16%) a stable fibrous union and one (4%) a nonunion. In Group B, stable union was achieved in all patients, three having a solid fusion and two a stable fibrous union. There was no statistically significant difference between the status of fusion in the two groups. Complications were noted in 12 patients (40%); these were mainly related to the screws, and included malpositioning and breakage. The presence of an intact or removed posterior arch of C1 did not affect the rate of fusion in patients with atlantoaxial instability undergoing C1/C2 fusion using transarticular screws and autograft.
    Matched MeSH terms: Cervical Vertebrae/radiography; Cervical Vertebrae/surgery*
  14. Chan AKH, Yusof MI, Abdullah MS
    Asian Spine J, 2021 Feb;15(1):1-8.
    PMID: 32252193 DOI: 10.31616/asj.2019.0242
    STUDY DESIGN: This is an observational study of computed tomography (CT) data.

    PURPOSE: The C1 and C2 laminas in the Malaysian Malay population were analyzed for the feasibility of fitting 3.5-mm laminar screws in a cross configuration.

    OVERVIEW OF LITERATURE: Morphometric analysis of the C1 and C2 laminas has been performed for various populations but not for the Malaysian Malay population.

    METHODS: A total of 330 CT cervical images were measured to establish the bicortical diameter of the C1 and C2 laminas as well as their height and length. The C1 posterior tubercle bicortical diameter and height were also determined from these images. All parameters were measured up to 0.1 mm, and statistical analysis was performed using IBM SPSS Statistics ver. 24.0 (IBM Corp., Armonk, NY, USA). An independent t -test and the Pearson chi-square test were used to determine the mean difference and screw acceptance.

    RESULTS: The means of the C1 lamina measurements were 5.79±1.19 mm in diameter, 9.76±1.51 mm in height, and 20.70±1.86 mm in length. The means of the measurements of the posterior tubercle were 7.20±1.88 mm in diameter and 10.51±1.68 mm in height. The means of the C2 lamina measurements were 5.74±1.31 mm in diameter, 11.76±1.69 mm in height, and 24.96±2.56 mm in length. Overall 65.5% of C1 and 80.3% of C2 laminas are able to accept 3.5-mm screws in a cross configuration. Screw acceptability is similar between the right and left sides (p >0.05). However, males have a higher screw acceptability compared with females (p <0.05), except for the C2 left lamina.

    CONCLUSIONS: It is feasible to insert a 3.5-mm screw in a cross configuration in the C1 and C2 laminas of the Malaysian Malay population, especially in males. However, a CT scan should be performed prior to the operation to determine screw acceptability and to estimate screw sizes.

    Matched MeSH terms: Cervical Vertebrae
  15. Mani S, Sharma S, Singh DK
    J Telemed Telecare, 2021 Feb;27(2):88-97.
    PMID: 31272309 DOI: 10.1177/1357633X19861802
    INTRODUCTION: The aim of this study was to determine the concurrent validity and reliability of telerehabilitation (TR)-based evaluation of the cervical spine among adults with non-specific neck pain (NS-NP).

    METHODS: A total of 11 participants with NS-NP were recruited. Pain intensity, active range of motion (AROM), posture, deep neck flexor (DNF) endurance, combined neck movements and disability were measured using face-to-face and TR methods, with a one-hour break in between. TelePTsys, an image-based TR system, was used for TR assessment.

    RESULTS: A high degree of concurrent validity for pain (bias = 0.90), posture (bias = 0.96°), endurance (bias = -2.3 seconds), disability (bias = 0.10), AROM (extension bias = -0.60 cm, flexion bias = 1.2 cm, side flexion bias = -1.00, rotation bias = -0.30 cm) was found. Standard error of measurement and coefficient of variation (CV) values were within the acceptable level for concurrent validity, except the CV for cervical flexion and endurance. There was a high degree of reliability demonstrated for pain, posture, AROM, endurance and disability measurements. The average-measure interclass correlation coefficient (ICC(3,1)) ranged from 0.96 to 0.99 for inter-rater, and 0.93 to 0.99 for intra-rater reliabilities. There was moderate agreement for combination movement for validity (78.5%, p 

    Matched MeSH terms: Cervical Vertebrae
  16. Tan, E.C., Soon, H.C., Kevin, M., Se To, B.C.
    Malays Orthop J, 2007;1(2):30-32.
    MyJurnal
    Congenital partial aplasia of the atlas with a posterior arch remnant is rare. It may be found as an incidental radiological finding or patients can present with neurological signs and symptoms after head or neck trauma. A 36-year-old female presented with a 3-day history of right sided neck pain radiating down the right arm. Radiographs of the cervical spine showed a radiolucent area in the region of the posterior arch of the atlas. Computed tomography subsequently revealed partial absence of the posterior arch of the atlas with a defect at the anterior ring. Her clinical condition subsequently improved with rest, analgesia and physiotherapy. This case report illustrates a situation where congenital defect of the posterior arch of the atlas was revealed in a patient with neck pain. Awareness of the existence of this condition will help clinicians avoid misdiagnosis and excessive investigations.
    Matched MeSH terms: Cervical Vertebrae
  17. Jothee S, Shafie MS, Mohd Nor F
    Forensic Sci Int, 2018 Aug 31.
    PMID: 30217665 DOI: 10.1016/j.forsciint.2018.08.038
    We present a case of a fatal motor vehicle collision of a 22-year-old car driver, who died at the scene after losing control of his car, and subsequently collided with a tree by the roadside. The subsequent autopsy revealed penetrating injuries on the neck, severing the larynx, carotid artery, jugular vein and fracturing the cervical vertebrae. Internal examination showed the offending material to be a semi-cylindrical metal fragment, which had lodged within the paravertebral muscle. Examination of the car with the authorities found that the metal fragment originated from a defective airbag booster cannister, which shattered upon deployment.
    Matched MeSH terms: Cervical Vertebrae
  18. Ooi SS, Wong SV, Yeap JS, Umar R
    Asia Pac J Public Health, 2011 Jul;23(4):608-19.
    PMID: 21768134 DOI: 10.1177/1010539511413750
    Motorcycle helmets have been proven to prevent head injury and reduce fatality in road crashes. However, certain studies indicate that the helmet increases the mass to the head, and thus the potential of neck injury due to the flexion/extension of the head-neck segment in a road crash may increase. This study was conducted to evaluate the effects of motorcycle helmets and the ways in which the accidents that occurred affected the incidence of cervical spine injury. Nevertheless, it is not intended to and does not discredit the fact that helmet use prevents many motorcyclists from sustaining serious and fatal head injuries. A total of 76 cases were collected and analyzed based on the data collected from real-world crashes. The Abbreviated Injury Scale (AIS) was used to assess the severity of injury, whereas the statistical Pearson χ(2) correlation method was used for analysis. The results showed that motorcycle helmets did not affect the severity of cervical spine injury. However, when the samples were further subcategorized into different crash modes, it was found that helmets affect the incidence of a severe cervical spine injury. In frontal collisions, the use of helmets significantly reduces the severity of cervical spine injury, whereas in rear-end, side impact, and skidded accidents, the use of helmets increases the probability of a severe cervical spine injury. However, in the latter crash modes, a motorcyclist without a helmet will have to trade-off with head injury. A logistic regression model has been developed with respective crash modes and the probabilities of risk in having severe cervical spine injury have been calculated. Future designs in motorcycle helmets should therefore consider the significance of nonfrontal accidents and the interaction of helmet with other parts of the body by possibly considering the weight of the helmet.
    Matched MeSH terms: Cervical Vertebrae/injuries*
  19. Yusof MI, Ming LK, Abdullah MS
    J Orthop Surg (Hong Kong), 2007 Aug;15(2):187-90.
    PMID: 17709859
    To measure the cervical pedicles and assess the feasibility of transpedicular fixation in a Malay population.
    Matched MeSH terms: Cervical Vertebrae/injuries
  20. Leng LK, Pancharoen C, Bunupuradah T, Thisyakorn U, Trinavarat P, Sosothikul D, et al.
    J Med Assoc Thai, 2007 Sep;90(9):1937-42.
    PMID: 17957942
    This report documents a case of infiltrating cervical spinal mass, most likely a spinal tumor, in a girl with HIV infection that regressed following HAART and without treatment of the tumor or any anti-infectives.
    Matched MeSH terms: Cervical Vertebrae/pathology*
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links