Juvenile xanthogranuloma (JXG) is an uncommon condition affecting the eye. We herein report a rare case of eyelid swelling in paediatric age group. A three-year-old Malay boy presented with chronic painless left upper eyelid mass which did not resolve with topical steroid. Clinically, the mass was a non-tender and firm nodular swelling which located at the lateral 1/3 of the left upper lid. Total excisional biopsy of the swelling was done and histopathological findings were consistent with JXG. The systemic associations and the treatment options for ocular JXG are discussed.
Palm fatty acid distillate (PFAD), is a by-product of the crude palm oil refining process. It comprises mainly of free fatty acids-around 45% palmitic and 33% oleic acids-as the major components. Ultra-violet (UV) curable urethane acrylate (UA) oligomers could be synthesized from PFAD, by the following procedure. A hydroxyl terminated macromer was first prepared by reacting PFAD with a mixture of isophthalic acid, phthalic anhydride, neopentagylcol (NPG), and pentaerythritol. The macromer was then reacted with 2-hydroxylethylacrylate (2HEA) and toluene diisocynate (TDI) to generate a resin, containing acrylate side chains for UV curable application. A series of UA resins were prepared by using 15, 25, 45, 55, and 70% of PFAD, respectively. The UA resin has Mw in the range of 3,200 to 27,000. They could be cured by UV irradiation at an intensity of 225 mW/cm². Glass transition temperature (Tg) of the cured film was measured by differential scanning calorimeter (DSC), and hardness of the film was determined by a pendulum hardness tester, according to American Society for Testing and Materials (ASTM)4366. The resins were used in a wood-coating application. All of the cured films showed good adhesion, hardness, and chemical resistance except for the one using the 70% PFAD, which did not cure properly.
Wormian bones are a subset of the small intrasutural bones that lie between the cranial sutures formed by the bones of the skull vault. They are formed due to additional ossification centres in or near sutures. They are usually considered as normal variants and seem to be determined genetically in certain populations. They have been linked with rapid cranial expansion as they appear in great number in hydrocephalic skulls. They are commonly found in the lambdoid suture and fontanelles but are occasionally seen in other sutures especially the coronal, squamosal, and sagittal sutures. We examined 25 dried human skulls with the aim to find out the occurrence and variations of Wormian bones, and surprisingly we found Wormian bones in the coronal, squamosal, and sagittal sutures in 6 skulls. These are uncommon sites of occurrence of sutural bones as reported in the literature. These findings prompted us to report these cases as their presence can lead to confusion in diagnosis in cases of skull fractures.
The formation of foam due to the injection of surfactant foam in FAWAG causes significant problems in the oil well production and separation facilities. The excessive foam can lead to the reduction of the separator capacity as well as its efficiency. A defoamer is needed to break and destroy the foam in the separator. There are many commercially available defoamer agents in the market, but not all defoamers are suitable for every application. For this reason, four modified silicone-based defoamers were successfully synthesized and characterized based on the data obtained from the screening process using various commercial defoamers. The performance of modified defoamers was evaluated using TECLIS FoamScan that imitate real conditions of treatment. The results show that all four of the modified silicone-based defoamers, especially amide-terminated-modified defoamers (S2) showed excellent performance as a defoaming agent to mitigate foam in specific conditions. The best-case condition for the modified defoamer to perform was at a high temperature (60 °C), gas flow rate of 1.0 L/min, and low ration concentration of the surfactant to brine (30:70). The study on the bubble count and distribution using a KRÜSS Dynamic Foam Analyzer revealed that S2 excellently contributes to the formation of unstable foam that can fasten foam destruction in the foaming system.
Three species composition surveys were conducted in a rural location in Kedah and an urban location in Pulau Pinang. Two of the surveys were conducted in November 2003, the first was at the Kedah site and the second was at the Pulau Pinang site. The third survey was conducted at the Pulau Pinang site again on the last week of April 2004. All these surveys were conducted one week prior to field evaluations of commercial chemical fly baits. The predominant species recovered from the surveys was the house fly, Musca domestica, which ranked first in prevalence in all three studies. Catches of Musca sorbens, Chrysoma megacephala and Lucillia cuprina were lower than M. domestica. Sarcophaga sp. was not present at the Kedah site and was only present at the Pulau Pinang site during the survey in April 2004. The other fly species present at the Kedah site were Megaselia sp., Psycoda sp., Piophila sp. and Fannia sp. These species were scarce and never exceeded 1% of the total catch.
The efficacy and residual efficacy of commercial baits, Quick Bayt (0.5% w/w imidacloprid) and Agita (10.0% w/w thiamethoxam) against synanthropic flies were evaluated under field conditions. Efficacy was evaluated based on knockdown percentage (KD %). The bait efficacy and residual efficacy evaluation were conducted for a period of 3 weeks and 6 weeks respectively. Baits were applied onto bait targets and placed on fly-count targets to facilitate the counting of flies. All baits were applied according to the manufacturer's recommended application rate. Three replicate treatments for each type of bait were placed at the study site each week. The number of flies feeding on baits and the knocked down flies were counted and collected. The efficacy of Agita and Quick Bayt did not differ significantly (t-test, P>0.05) over the 3-week period, even though Quick Bayt had a slightly higher KD% than Agita. In the residual efficacy evaluation, the (knockdown) KD% of Quick Bayt was consistent at around 36% for the first five weeks but dropped to 33.8 +/- 0.4% on the sixth week. The KD% for Agita on the first week was 33.6 +/- 12.2% and remained relatively consistent for the first 4 weeks at around 31%. KD% dropped to 16.7 +/- 3.3% on week 5 and to 15.7 +/- 1.2% on week 6. The difference in residual efficacy of the two baits was significant (t-test, p < 0.05).
This study was done in all UNIMAS medical students from year 1 to year 5 in the year 2004. A questionnaire was used. 290 students participated with a response rate of 72.5%. There were more male students snoring than female (ratio 5.9:1.3). The habitual snoring percentages for all years, first year and final year medical students are 7.2, 9.9 and 3.6 respectively and these are comparatively and relatively low with other studies reported in the last 10 years, and the reasons for this are unknown. However it was interesting to note in this study and others that there are relatively more snoring medical students in the first year than subsequent years. Significant positive correlation of snoring was found with the factors of gender, weight, height and sleep apnoea, all having p<0.0005, but no significant correlation was found in others including examination results.
SummaryThis study investigated the breeding parameters and embryogenic development of diploid and heat shock-induced triploid eggs of Anabas testudineus (Bloch, 1792). To this effect, broodstocks of A. testudineus were induced to spawn using the Ovaprim® hormone. After fertilization, the eggs were divided into two groups and one portion heat shocked at 41°C (for 3 min), at approximately 4 min after fertilization. Results of fertilization, hatchability, as well as the sequence and timing of embryogenic development were collated from three breeding trials. Fertilization percentages were similar in both treatments (≈90%) while hatchability was higher in the diploid eggs (79.56%) than the triploid induced eggs (50.04%). Both treatments had the same sequence of embryogenetic stages; however, the timing of development was significantly delayed in the triploids (i.e. beyond the 2-cell stages) as compared with the observations in the control group (diploid eggs). Consequently, hatching time was 5 h faster in the diploid eggs [i.e. 18 hours post fertilization (hpf)] compared with the triploid induced eggs (23 hpf). The most critical stage of embryonic development in which mass mortality occurred in the different treatments was the somite stage. The status of triploid hatchlings was affirmed using erythrocyte morphology in 2-month-old fingerlings.
Peri-implant diseases can still develop despite oral hygiene practices being maintained. Consequently, regular debridement must be carried out to ensure the implant is sustained. This review evaluated bacterial colonization on implants following the use of different hygiene instruments. A literature search was conducted in PubMed, ScienceDirect, and Scopus databases for articles published from 2012 to 2022. A total of 19 full-text papers were selected. The number of bacteria colonized was most commonly evaluated with a scanning electron microscope (SEM) or by colony-forming unit (CFU) counts, crystal violet assays, plaque index, probing depth, bleeding on probing, turbidity test, and live-dead assays. Rubber cup polishing with an abrasive paste showed a significantly greater reduction in biofilm formation compared with air abrasion with glycine powder, while the air abrasion treatment was found to be more efficient than piezoelectric, carbon, and stainless steel scalers. Surface treatment with Er, Cr: YSGG laser, and Er: YAG laser resulted in statistically significant superior dental biofilm removal compared with titanium curettes and photodynamic therapy. Air abrasion, plastic curette, titanium curette, and ultrasonic scaler showed no significant differences in bacterial colonization, but air abrasion and plastic curette were safer for zirconia implant decontamination. Furthermore, the titanium brush showed better results in decontaminating the implant surface than the Er: YAG laser. Although no single instrument or method could be considered as offering a gold standard in treating peri-implant diseases, the use of air abrasion with glycine powder, laser therapies, rubber cup polishing with an abrasive paste, and a titanium brush had high levels of cleaning efficacy and acceptance by patients.
Using the cow-baited trap (CBT) method, 1,845 Anopheles mosquitos, comprising 14 species, were caught in malaria-endemic area of Hulu Perak district, Peninsular Malaysia. The two dominant species were An. barbirostris (18.59%) and An. aconitus (18.86%). Anopheles maculatus, the main malaria vector, constituted 9.11% of the total number of mosquitos sampled. Three hundred and seventy-seven Anopheles larvae, comprising 8 species, were sampled using the North Carolina Biological Station dipper. Anopheles barbirostris larvae amounted to 64.69% of the total number of larvae; An. aconitus accounted for 10.65% of larvae. Seven habitats were identified as breeding places of Anopheles. Most species were found to breed in paddies, fishponds, and rivers. Other less popular habitats were temporary pools, mountain streams, and spring wells.
A study on the distribution of malaria in Hulu Perak district, Peninsular Malaysia was carried out between January and December 1993. The study encompassed the distribution of malaria cases according to sex, age and profession. A total of 332 cases were recorded, with 182 cases occurring in males. The highest infection was observed in the above 15 years old age group. Forest workers (loggers, rattan collectors and forest product gatherers) were the group most exposed to the disease (32.8%), followed by both plantantion workers (32.2%) and aboriginal communities (32.2%). Army and police personnels (2.1%) were also infected. Plasmodium falciparum was the most common species of malaria in the area.
This study aimed to evaluate the bioactivities and biocompatibilities of porous polylactic acid (PLA) reinforced with cellulose nanofiber (CNF) scaffolds. The in vitro degradation behaviors of the porous PLA/CNF scaffolds were systematically measured for up to 8 weeks in a phosphate-buffered saline medium at 37 °C. The reinforcement of CNF resisted the biodegradation of the scaffolds. The in vitro cytotoxicity and biocompatibility of the scaffolds were determined using the Beas2B American Type Culture Collection cells. The 3-(4,5-cimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide cytotoxicity and proliferation tests showed that the scaffolds were non-toxic, and epithelial cells grew well on the scaffold after 7 days of culture, whereas the percentage of cell proliferation on the PLA/CNF15 scaffold was the largest, 130 %. A scratch wound-healing assay was performed to evaluate the suitability of the scaffolds for cell migration. The results demonstrated that the scaffolds exhibited good cell migration towards nearly complete wound closure.
The study was conducted to evaluate the root, shoot and leaf callus cell regeneration and its biochemical properties like antioxidant, carbohydrate, pigment and mineral content from broccoli root, shoot and leaf cutting in vitro. An in vitro factorial experiment was carried out based on a Completely Randomized Design (CRD) with 5 replicates in tissue culture applying different IBA (0.25, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 and 3.5 mg/l) and BAP (1 mg/l) concentrations using broccoli root tip and leaf cutting. The results showed that a higher callus weight was found in the cultured leaf cutting than in root tip cutting in the concentration of 1.0, 1.5 & 2.0 mg/l IBA + 1.0 mg/l BAP combination. The highest callus weight was found in the cultured leaf cutting than root tips cutting at the concentration of 1.5mg/l IBA+1.0 mg/l BAP. Furthermore, the highest inverted sugar and glucose, chlorophyll and nutrient content (K+, NO3- & Ca++), total phenol, flavonoid and total antioxidant were found in the concentration of 1.5mg/l IBA+1.0 mg/l BAP combination in both broccoli leaf and root cutting. The results seemed that it was best to use the combination of the IBA and BAP in the concentration of 1.0-2.0 mg/l and 1mg/l to regenerate root, leaf and callus cell proliferation of broccoli from the root tip and leaf cutting.
Urinary tract infection (UTI) is the most common complication following kidney transplantation (KT), which could result in losing the graft. This study aims to identify the prevalence of bacterial UTI among KT recipients in Yemen and to determine the predisposing factors associated with post renal transplantation UTI. A cross sectional study included of 150 patients, who underwent KT was conducted between June 2010 and January 2011. A Morning mid-stream urine specimen was collected for culture and antibiotic susceptibility test from each recipient. Bacterial UTI was found in 50 patients (33.3%). The prevalence among females 40.3% was higher than males 29%. The UTI was higher in the age group between 41-50 years with a percentage of 28% and this result was statistically significant. Predisposing factors as diabetes mellitus, vesicoureteral reflux, neurogenic bladder and polycystic kidney showed significant association. High relative risks were found for polycystic kidney = 13.5 and neurogenic bladder = 13.5. The most prevalent bacteria to cause UTI was Escherichia coli represent 44%, followed by Staphylococcus saprophyticus 34%. Amikacin was the most effective antibiotic against gram-negative isolates while Ciprofloxacin was the most effective antibiotic against Staphylococcus saprophyticus. In conclusion, there is high prevalence of bacterial UTI among KT recipients in Yemen. Diabetes mellitus, vesicoureteral reflux, neurogenic bladder, polycystic kidney and calculi were the main predisposing factors.
Gelatin is used as an ingredient in both food and non-food industries as a gelling agent, stabilizer, thickener, emulsifier, and film former. Porcine skins, bovine hides, and cattle bones are the most common sources of gelatin. However, mammalian gelatins are rejected by some consumers due to social, cultural, religious, or health-related concerns. In the present study, gelatin was obtained from camel skin as an alternative source using a combination of processing steps. Central composite design combined with response surface methodology was used to achieve high gelatin yields under different extraction conditions: temperatures of 40, 60, and 80 °C; pH values of 1, 4, and 7; and extraction times of 0.5, 2.0, and 3.5 min. Maximum gelatin yield from camel skin (29.1%) was achieved at 71.87 °C and pH 5.26 after 2.58 min. The extracted gelatin samples were characterized for amino acid profile, foaming capacity, film formation, foam stability, and gel strength (Bloom value). Gelatin nanoparticles were produced, and their morphology and zeta potential were determined. Bloom value of the camel skin gelatin was 340 g. Amino acid analysis revealed that the extracted gelatin showed high glycine and proline contents. Analysis of camel skin gelatin nanoparticle and functional properties revealed high suitability for food and non-food applications, with potential use in the growing global halal food market.
A possible interaction between glucocorticoids and estrogen-induced increases in brain-derived-neurotrophic factor (BDNF) expression in enhancing depressive-like behaviour has been documented. Here we evaluated the effects of Tualang honey, a phytoestrogen, and 17 β -estradiol (E2) on the depressive-like behaviour, stress hormones, and BDNF concentration in stressed ovariectomised (OVX) rats. The animals were divided into six groups: (i) nonstressed sham-operated control, (ii) stressed sham-operated control, (iii) nonstressed OVX, (iv) stressed OVX, (v) stressed OVX treated with E2 (20 μg daily, sc), and (vi) stressed OVX treated with Tualang honey (0.2 g/kg body weight daily, orally). Two months after surgery, the animals were subjected to social instability stress procedure followed by forced swimming test. Struggling time, immobility time, and swimming time were scored. Serum adrenocorticotropic hormone (ACTH) and corticosterone levels, and the BDNF concentration were determined using commercially available ELISA kits. Stressed OVX rats displayed increased depressive-like behaviour with significantly increased serum ACTH and corticosterone levels, while the BDNF concentration was significantly decreased compared to other experimental groups. These changes were notably reversed by both E2 and Tualang honey. In conclusion, both Tualang honey and E2 mediate antidepressive-like effects in stressed OVX rats, possibly acting via restoration of hypothalamic-pituitary-adrenal axis and enhancement of the BDNF concentration.
The objective of this study is to compare the effect of two different isolation techniques on the physico-chemical and thermal properties of cellulose nanowhiskers (CNW) from oil palm biomass obtained microcrystalline cellulose (MCC). Fourier transform infrared analysis showed that there are no significant changes in the peak positions, suggesting that the treatments did not affect the chemical structure of the cellulose fragment. Scanning electron microscopy showed that the aggregated structure of MCC is broken down after treatment. Transmission electron microscopy revealed that the produced CNW displayed a nanoscale structure. X-ray diffraction analysis indicated that chemical swelling improves the crystallinity of MCC while maintaining the cellulose I structure. Acid hydrolysis however reduced the crystallinity of MCC and displayed the coexistence of cellulose I and II allomorphs. The produced CNW is shown to have a good thermal stability and hence is suitable for a range of applications such as green biodegradable nanocomposites reinforced with CNW.
In this work, we successfully isolated microcrystalline cellulose (MCC) from oil palm empty fruit bunch (OPEFB) fiber-total chlorine free (TCF) pulp using acid hydrolysis method. TCF pulp bleaching carried out using an oxygen-ozone-hydrogen peroxide bleaching sequence. Fourier transform infrared (FT-IR) spectroscopy indicates that acid hydrolysis does not affect the chemical structure of the cellulosic fragments. The morphology of the hydrolyzed MCC was investigated using scanning electron microscopy (SEM), showing a compact structure and a rough surface. Furthermore, atomic force microscopy (AFM) image of the surface indicates the presence of spherical features. X-ray diffraction (XRD) shows that the MCC produced is a cellulose-I polymorph, with 87% crystallinity. The MCC obtained from OPEFB-pulp is shown to have a good thermal stability. The potential for a range of applications such as green nano biocomposites reinforced with this form of MCC and pharmaceutical tableting material is discussed.
The growths of the African catfish (Clarias gariepinus) and water spinach (Ipomoea aquatica) were evaluated in recirculation aquaponic system (RAS). Fish production performance, plant growth and nutrient removal were measured and their dependence on hydraulic loading rate (HLR) was assessed. Fish production did not differ significantly between hydraulic loading rates. In contrast to the fish production, the water spinach yield was significantly higher in the lower hydraulic loading rate. Fish production, plant growth and percentage nutrient removal were highest at hydraulic loading rate of 1.28 m/day. The ratio of fish to plant production has been calculated to balance nutrient generation from fish with nutrient removal by plants and the optimum ratio was 15-42 gram of fish feed/m(2) of plant growing area. Each unit in RAS was evaluated in terms of oxygen demand. Using specified feeding regime, mass balance equations were applied to quantify the waste discharges from rearing tanks and treatment units. The waste discharged was found to be strongly dependent on hydraulic loading rate.