Material and methods: The extracortical bone bridge interface's radiological parameter was evaluated at the prosthesis bone junction two years after surgery utilising a picture archiving and communication system (PACS). The radiograph's anteroposterior and lateral view was analysed for both thickness and length in all four cortices. The analysis was done in SPSS Version 24 using One-Way ANOVA and independent T-Test. Results were presented as mean and standard deviation and considered significant when the p-value was < 0.05.
Results: The mean average thickness was 2.2293mm (SD 1.829), and the mean average length was 31.95% (SD 24.55). We observed that the thickness and length of EBBI were superior in the young patient or patients with giant cell tumour that did not receive chemotherapy, compared to patients treated for osteosarcoma. The distal femur also had better EBBI compared to the proximal tibia. However, the final multivariable statistical analysis showed no significant difference in all variables. EBBI thickness was significantly and positively correlated with EBBI Length (p<0.001). We conclude that, for each 1mm increase in EBBI thickness, the length will increase by 0.06% on average. About 17.2% of patients out of the 29 showed no radiological evidence of EBBI.
Conclusion: From our study, there were no factors that significantly contributed to the formation and incorporation of EBBI.
Objective: The objective of this study is to determine the antimicrobial effects of MP, AV, and MP + AV in comparison with Ca(OH)2 against E. faecalis, as an intracanal medicament.
Materials and Methods: Antimicrobial activity of MP, AV, MP + AV, Ca(OH)2, and dimethyl sulfoxide was tested against E. faecalis using antimicrobial sensitivity testing, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC). The results were analyzed by Kruskal-Wallis test with Mann-Whitney post hoc test and repeated measures analysis of variance with Bonferroni post hoc test (P < 0.05).
Results: For agar well-diffusion method, MP + AV gave maximum inhibition zone diameter (mean: 8.11 ± 0.015 mm), MP (mean: 6.21 ± 0.046 mm, Ca(OH)2 (mean: 5.5 ± 0.006), and AV (mean: 5.05 ± 0.012) with P < 0.05. MIC for MP + AV was 2 mg/ml, MP at 8 mg/ml, Ca(OH)2 at 8 mg/ml, and AV at 16 mg/ml. The MBC for MP + AV is at 4 mg/ml, MP at 16 mg/ml, Ca(OH)2 at 16 mg/ml, and AV at 32 mg/ml.
Conclusion: The combination of MP and AV consistently showed better antimicrobial activity compared to MP and AV alone against E. faecalis. The findings suggest that MP and AV used in combination may be an ideal intracanal medicament in FET and PET.
METHODS: A randomized, parallel group, double blinded study was conducted on 54 patients undergoing orthodontic treatment at a university clinic. They were randomized to 3 groups, i.e., WhatsApp (W) group, electronic mail (email) (E) group and control (C) group with 18 subjects in each group. Group (W) and group (E) received oral health messages once a week through WhatsApp and email reminders, respectively, while group (C) did not receive any reminders. Plaque was measured at baseline (T0), after 4 weeks (T1), and after 8 weeks (T2). For each subject, intraoral photographs were taken after application of a plaque-disclosing agent; and the area covered by plaque was measured on teeth 12, 13, 43, 22, 23 and 33 by planimetry. Data were analyzed using SPSS (version 22, IBM Corp., Armonk, NY, USA). Mixed analysis of variance (ANOVA) was used to compare plaque scores between and within the groups.
RESULTS: A total of 54 subjects (14 males and 40 females) with mean age of 22.43 years completed the study. At the end of 8 weeks, no statistically significant difference in the mean plaque score was found between the groups at the different time intervals (p = 0.201).
CONCLUSION: WhatsApp and email reminders did not significantly influence the oral hygiene compliance of orthodontic patients.
MATERIALS AND METHODS: Overall, 180 samples were used for polymerization shrinkage (buoyancy and optical methods) and degree of conversion tests in which they were divided into Group 1, nanofilled composite (Filtek-Z350- XT; 3M ESPE, St Paul, MN 55144-1000, USA), Group 2, microhybrid composite (Zmack-Comp), and Group 3, nanohybrid composite (Zr-Hybrid). Polymerization shrinkage test was performed using buoyancy and optical methods. For buoyancy method, samples were weighed in air and water to calculate the shrinkage value, whereas, for optical method, images of nonpolymerized samples were captured under a digital microscope and recaptured again after light-cured to calculate the percentage of shrinkage. Degree of conversion was tested using Fourier-transform infrared spectroscopy spectrometer.
STATISTICAL ANALYSIS: Data were analyzed using one-way analysis of variance complemented by post hoc Dunnett's T3 test for polymerization shrinkage and Tukey's honestly significant difference test for degree of conversion. Level of significance was set at p < 0.05.
RESULTS: Group 3 demonstrated similar polymerization shrinkage with Group 1, but lower shrinkage (p < 0.05) than Group 2 based on buoyancy method. However, optical method (p < 0.05) showed that Group 3 had the lowest shrinkage, followed by Group 1 and lastly Group 2. Besides, Group 3 showed a significantly higher degree of conversion (p < 0.05) than Group 1 and comparable conversion value with Group 2.
CONCLUSIONS: Zirconia-reinforced rice husk nanohybrid composite showed excellent shrinkage and conversion values, hence can be considered as an alternative to commercially available composite resins.
MATERIALS AND METHODS: Sixty patients with one dry socket each, at University Dental Hospital Sharjah, were divided into three treatment groups based on their choice. In group I (n = 30), conventional treatment comprising of gentle socket curettage and saline irrigation was done. Group II (n = 15) dry sockets were treated with CGF and group III (n = 15) sockets were lased with LLLT. All dry socket patients were seen at day 0 for treatment and subsequently followed-up at 4, 7, 14, and 21 days. Pain score, perisocket inflammation, perisocket tenderness, and amount of granulation tissue formation were noted.
STATISTICAL ANALYSIS: Data were analyzed as mean values for each treatment group. Comparisons were made for statistical analysis within the group and among the three groups to rank the efficacy of treatment using one-way analysis of variance (ANOVA). Statistically significant difference is kept at p < 0.05.
RESULTS: Conventional treatment group I took more than 7 days to match the healing phase of group II CGF treated socket and group III LLLT irradiated socket (p = 0.001). When healing rate between CGF and LLLT are compared, LLLT group III showed a delay of 4 days compared with CGF in granulation tissue formation and pain control.
CONCLUSION: CGF treated socket was superior to LLLT in its ability to generate 75% granulation tissue and eliminate pain symptom by day 7 (p = 0.001).
DESIGN: A double-blind, cluster-randomized approach was used as a randomization method for this study to evaluate the stress management interventional program.
METHODS: A cluster-randomized controlled trial was carried out in eight comprehensive healthcare centres in Amman city, Jordan; four centres were randomly assigned to each experimental and control group. One hundred and seventy nurses were selected randomly from March 2019 - August 2019 and data were collected by using the Nursing Stress Scale & brief COPE over three data collection times. Both descriptive and inferential statistics (repeated measure ANOVA, Independent t test, and chi-squared) were used to answer the research questions of this study.
RESULTS: The results showed that both the levels of occupational stress and coping strategies were significantly different between the two study groups over the three data collection points (p
DESIGN & SETTING: This cross-sectional study was conducted in Universiti Kebangsaan Malaysia Medical Center between May and September 2017.
PARTICIPANTS AND METHODS: Three hundred males and females with mean age of 30.23 (±11.04) years were recruited in equal number for each gender (n = 150) and divided into 3 groups of 50 according to their BMI (n = 50). The three groups are non-obese (BMI≤22.9kg/m2); obese (BMI between 23 and 34.9 kg/m2); and morbidly obese (BMI >35kg/m2). BMI and Voice Handicap Index-10 (VHI-10) were obtained. The average of three readings of MPT was measured using a stopwatch while the participants phonate /a/, /i/ and /u/. Unpaired t-test and ANOVA were used to compare means between and across groups. Spearman correlation assessed the correlation between MPT and BMI.
MAIN OUTCOME MEASURES: The normative values of MPT of both genders and correlation with BMI were analyzed.
RESULTS: The MPT normative values for males and females in the non-obese group were of 21.41 (±6.85) seconds and 18.05 (±5.06)seconds respectively for /a/. The MPT for all vowels were significantly higher in males across the BMI groups (P ≤ 0.05). There was low negative correlation between MPT and BMI in both genders.
CONCLUSIONS: This pioneering study documented the normative values of MPT among Malaysians showed that males had longer MPT than females across the BMI groups. Obesity affects the MPT in that as BMI increases, the MPT decreases.
PURPOSE: The purpose of this in vitro study was to evaluate the SR, tensile strength (TS), and percentage elongation (% E) of different SEs subjected to outdoor weathering in the Malaysian climate.
MATERIAL AND METHODS: Type-II dumbbell-shaped specimens (N-120) (nonweathered=15, weathered=15) were made from 3 room-temperature vulcanized (A-2000, A-2006, and A-103) and 1 heat-temperature vulcanized (M-511) silicone (Factor II). For 6 months, weathered specimens were subjected to outdoor weathering inside a custom exposure rack. Simultaneously, the nonweathered specimens were kept in a dehumidifier. Subsequently, the SR was measured with a profilometer; TS and % E were measured by using a universal testing machine. Two-way ANOVA was used to compare the means of the tested properties of the nonweathered and weathered specimens, and pairwise comparison was carried out between the silicones (α=.05).
RESULTS: After outdoor weathering, the SR, TS, and % E were adversely affected by weathering in the Malaysian environment. Among the silicone materials, A-2000 showed the least TS changes (2.51 MPa), while A-2006 demonstrated significant changes in percentage elongation after outdoor weathering (266.5%). M-511 exhibited the highest mean value (2.50 μm) for SR changes. In addition, A-103 SE showed statistically significant differences in most pairwise comparisons for all 3 dependent variables.
CONCLUSIONS: Based on the evaluation of mechanical properties, A-103 can be suggested as a suitable silicone for maxillofacial prostheses fabricated for tropical climates. However, A-2000 can be a suitable alternative, although significant changes to surface roughness were detected after outdoor weathering.