Displaying publications 1 - 20 of 24 in total

Abstract:
Sort:
  1. Fulltext Synthesis and thermal degradation studies of melamine formaldehyde resins
    Ullah S, Bustam MA, Nadeem M, Naz MY, Tan WL, Shariff AM
    ScientificWorldJournal, 2014;2014:940502.
    PMID: 25436237 DOI: 10.1155/2014/940502
    Melamine formaldehyde (MF) resins have been synthesized at different reaction temperature and pH values. Different molar ratios of melamine and formaldehyde were used to synthesize the corresponding resins. The prepared resin samples were characterized by using molecular weight determination viscometry and thermogravimetric analysis (TGA). The maximum percentage of solid content (69.7%) was obtained at pH 8.5 and 75°C temperature. The molecular weight of MF resin was increased with an increase of melamine monomer concentration. The highest residual weight 14.125 wt.% was obtained with sample 10.
    Matched MeSH terms: Resins, Synthetic/chemical synthesis*; Resins, Synthetic/metabolism
  2. Comparison between gutta-percha and resin-coated gutta-percha using different obturation techniques
    Al-Afifi NA, Abdullah M, Al-Amery SM, Abdulmunem M
    J Appl Biomater Funct Mater, 2016 Jul 26;14(3):e307-13.
    PMID: 27149939 DOI: 10.5301/jabfm.5000273
    BACKGROUND: The aim of this study was to evaluate and compare the obturation quality between canals obturated with gutta-percha/AH Plus sealer (GP group) and resin-coated GP/EndoREZ® sealer (ER group).

    METHODS: A total sample of 90 mandibular premolar teeth was divided into 2 groups (2 × 45 canals): the GP group and ER group. Each group was further divided into 3 subgroups (n = 15): cold lateral compaction (CLC), warm lateral compaction (WLC) and single cone (SC). The teeth were subsequently embedded in resin and sectioned horizontally at 1, 3, 6 and 9 mm. All sections were then viewed with a stereomicroscope at ×40 magnification. The area occupied by core filling materials was determined using Cell^D software.

    RESULTS: With CLC, the percentage of core filling materials in the ER group was significantly higher than in the GP group at the 1- and 3-mm levels. Similarly, with WLC, the percentage of core filling material in the ER group was significantly higher than in the GP group at the 1-, 3- and 9-mm levels. With SC, the percentage of core filling materials in the ER group was significantly higher than in the GP group at all levels.

    CONCLUSIONS: It can be concluded that the resin-coated GP/EndoREZ® sealer is superior to the gutta-percha/AH Plus in the percentage of core filling material.

    Matched MeSH terms: Resins, Synthetic/pharmacology; Resins, Synthetic/chemistry*
  3. Fulltext Detail reproduction of elastomeric materials: effect of viscosity and groove geometry
    Nik Zarina Nik Mahmood, Noor Hayaty Abu Kasim, Mamat Azuddin, Noor Lide Abu Kassim
    Compendium of Oral Science, 2015;2(1):21-31.
    MyJurnal
    Objective: To evaluate the effect of type of viscosity and groove on surface detail reproduction of elastomeric impression materials. Methods: Two polyvinylsiloxane and polyether elastomeric impression materials were investigated. An aluminium cylindrical reference block with V- and U-shaped grooves of 1 mm and 2 mm in depth was machined using CAD-CAM system. Impressions of the block were taken to produce 35 master dies. Each die was immersed in distilled water for 5 minutes prior to impression making. Surface topography of the dies and impressions were captured using Alicona Imaging System. Mean difference in depth between the mas-ter dies and corresponding impressions’ grooves were analyzed. Results: Type of viscosities and groove showed significant main effects on surface detail (p < .01), but no significant interaction was observed between the two (p > .01). Express™ putty/light exhibited the lowest mean difference in depth for all grooves. The highest mean difference for U1 (38.3μm ± 21.55), U2 (52.96μm ± 30.39),V1 (45.02μm ± 34.82) and V2 (58.44μm ± 44.19) was obtained from Impregum medium, Aquasil medium, Impregum™ heavy/light and Impregum™ heavy/light groups respectively. Conclusion: Express putty/light-bodied material produced the best surface detail, and U-shaped groove showed superior detail reproduction.
    Matched MeSH terms: Resins, Synthetic
  4. Dynamic analysis of bulk-fill composites: Effect of food-simulating liquids
    Eweis AH, Yap AU, Yahya NA
    J Mech Behav Biomed Mater, 2017 10;74:183-188.
    PMID: 28605721 DOI: 10.1016/j.jmbbm.2017.06.004
    This study investigated the effect of food simulating liquids on visco-elastic properties of bulk-fill restoratives using dynamic mechanical analysis. One conventional composite (Filtek Z350 [FZ]), two bulk-fill composites (Filtek Bulk-fill [FB] and Tetric N Ceram [TN]) and a bulk-fill giomer (Beautifil-Bulk Restorative [BB]) were evaluated. Specimens (12 × 2 × 2mm) were fabricated using customized stainless steel molds. The specimens were light-cured, removed from their molds, finished, measured and randomly divided into six groups. The groups (n = 10) were conditioned in the following mediums for 7 days at 37°C: air (control), artificial saliva (SAGF), distilled water, 0.02N citric acid, heptane, 50% ethanol-water solution. Specimens were assessed using dynamic mechanical testing in flexural three-point bending mode and their respective mediums at 37°C and a frequency range of 0.1-10Hz. The distance between the supports were fixed at 10mm and an axial load of 5N was employed. Data for elastic modulus, viscous modulus and loss tangent were subjected to ANOVA/Tukey's tests at significance level p < 0.05. Significant differences in visco-elastic properties were observed between materials and mediums. Apart from bulk-fill giomer, elastic modulus was the highest after conditioning in heptane. No apparent trends were noted for viscous modulus. Generally, loss tangent was the highest after conditioning in ethanol. The effect of food-simulating liquids on the visco-elastic properties of bulk-fill composites was material and medium dependent.
    Matched MeSH terms: Resins, Synthetic/analysis*
  5. [Endodontic filling with gutta-percha- requirements, formation and characteristics]
    Yildirim A, Lübbers HT, Yildirim V
    Swiss Dent J, 2016;126(2):150-1.
    PMID: 26915930
    Gutta-percha is a tough plastic substance from the latex of several Malaysian trees of the sapodilla family that resembles rubber but contains more resin. It is especially used as insulation and in dentistry. Gutta-percha endodontic filling points were found to contain approximately 20% gutta-percha (matrix), 66% zinc oxide (filler), 11% heavy metal sulphates (radiopacifier), and 3% waxes and/or resins (plasticiser). The mechanical properties were indicative of a partially crystalline viscoelastic polymeric material.
    Matched MeSH terms: Resins, Synthetic/analysis
  6. Cost-effective, expedient, and time-saving surface texturing technique for facial prostheses
    Aggarwal H, Kumar P, Eachempati P, Krishanappa SK
    J Prosthet Dent, 2015 Sep;114(3):456-7.
    PMID: 26047802 DOI: 10.1016/j.prosdent.2015.04.010
    This article describes a cost-effective, expedient, and time-saving technique for surface texturing a facial prosthesis with fine sand mixed in resin adhesive glue.
    Matched MeSH terms: Resins, Synthetic
  7. Fulltext Spatial and temporal variation on distributions of dissolved and particulate arsenic and mercury in Sungai Kuantan, Pahang
    Fikriah Faudzi, Mohd Fuad Miskon, Kamaruzzaman Yunus, Mokhlesur Rahman
    Sains Malaysiana, 2017;46:393-399.
    It is important to monitor the concentration of toxic metals in the Sungai Kuantan as it serves many communities in terms of domestic, fisheries and agriculture purpose. In order to determine the distributions of dissolved and particulate As and Hg in Sungai Kuantan and evaluate its changes temporally and spatially, water samples were collected from the surface and bottom layers in a grid of 9 stations from estuary towards the upstream of Sungai Kuantan from May 2012 till October 2012. The dissolved metals were pre-concentrated using Chelex-100 while particulate metals were digested using Teflon bomb and subsequently were analyzed using ICP-MS. Dissolved As ranging from 4.650 to 36.894 µg L-1 while dissolved Hg ranging from BDL to 0.011 µg L-1. Particulate As and Hg varied from 0.650 to 86.087 mg L-1 and BDL to 5.873 mg L-1, respectively. Higher concentration of the dissolved elements were found mainly in October 2012 and particulate elements concentration mostly higher in May 2012. The source of the studied metals in the river may be the run-off from the effluent discharges and other natural sources. The toxic elements studied in Sungai Kuantan waters were still below the Interim Marine Water Quality Standard (INWQS) permissible limits.
    Matched MeSH terms: Resins, Synthetic
  8. Fulltext Optimization of vanillin production using isoeugenol as substrate by Aspergillus niger I-1472
    Tan, M. C., Liew, S. L., Wan Aida, W. M., Osman, H., Maskat, M. Y.
    International Food Research Journal, 2015;22(4):1651-1656.
    MyJurnal
    Response Surface Methodology (RSM) was used in the study to optimize the production of vanillin from isoeugenol through fermentation by Aspergillus niger I-1472. Three factors were studied which include amount of isoeugenol, resin (Amberlite XAD-4) and Span 80. During fermentation, isoeugenol as substrate were vortexed with Span 80 and added into the culture on Day 4. Resin (Amberlite XAD-4) was added into the medium the following day. The predicted optimum medium combination consisted of 3.61 g/L of isoeugenol, 5.8% (g/ mL) of Amberlite XAD-4 resin and 0.37% of Span 80 with an expected vanillin production of 0.137 g/L. Verification test showed that the model produced similar predicted and experimental values.
    Matched MeSH terms: Resins, Synthetic
  9. Fulltext QuadraPure-supported palladium nanocatalysts for microwave-promoted Suzuki cross-coupling reaction under aerobic condition
    Liew KH, Loh PL, Juan JC, Yarmo MA, Yusop RM
    ScientificWorldJournal, 2014;2014:796196.
    PMID: 25054185 DOI: 10.1155/2014/796196
    Cross-linked resin-captured palladium (XL-QPPd) was readily prepared by simple physical adsorption onto the high loading QuadraPure macroporous resin and a subsequent reduction process. To enhance the mechanical stability, entrapped palladium nanocatalysts were cross-linked with succinyl chloride. Both transmission electron microscopy images and X-ray diffraction analysis revealed that the palladium nanoparticles were well dispersed with diameters ranging in 4-10 nm. The catalyst performed good catalytic activity in microwave-promoted Suzuki cross-coupling reactions in water under aerobic condition with mild condition by using various aryl halides and phenylboronic acid. In addition, the catalyst showed an excellent recyclability without significant loss of catalytic activity.
    Matched MeSH terms: Resins, Synthetic/radiation effects; Resins, Synthetic/chemistry*
  10. Fulltext Preparation, characterization and thermal degradation of polyimide (4-APS/BTDA)/SiO(2) composite films
    Ahmad MB, Gharayebi Y, Salit MS, Hussein MZ, Ebrahimiasl S, Dehzangi A
    Int J Mol Sci, 2012;13(4):4860-72.
    PMID: 22606014 DOI: 10.3390/ijms13044860
    Polyimide/SiO(2) composite films were prepared from tetraethoxysilane (TEOS) and poly(amic acid) (PAA) based on aromatic diamine (4-aminophenyl sulfone) (4-APS) and aromatic dianhydride (3,3,4,4-benzophenonetetracarboxylic dianhydride) (BTDA) via a sol-gel process in N-methyl-2-pyrrolidinone (NMP). The prepared polyimide/SiO(2) composite films were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and thermogravimetric analysis (TGA). The FTIR results confirmed the synthesis of polyimide (4-APS/BTDA) and the formation of SiO(2) particles in the polyimide matrix. Meanwhile, the SEM images showed that the SiO(2) particles were well dispersed in the polyimide matrix. Thermal stability and kinetic parameters of the degradation processes for the prepared polyimide/SiO(2) composite films were investigated using TGA in N(2) atmosphere. The activation energy of the solid-state process was calculated using Flynn-Wall-Ozawa's method without the knowledge of the reaction mechanism. The results indicated that thermal stability and the values of the calculated activation energies increased with the increase of the TEOS loading and the activation energy also varied with the percentage of weight loss for all compositions.
    Matched MeSH terms: Resins, Synthetic/chemical synthesis*; Resins, Synthetic/chemistry
  11. Fulltext The flexural strengths of five commercially available tooth-coloured restorative materials
    Sulaiman, E., Yeo, Y.M., Chong, Y.T.
    Ann Dent, 2007;14(1):39-45.
    MyJurnal
    Purpose of the study: The objective of this study was to investigate the flexural strengths of five commercially available tooth-coloured restorative materials – Alpha-Dent (composite resin, Dental Technologies Inc.), Solare Anterior (composite resin, GC), F2000 (polyacid-modified composite resin, 3M), Beautifil (giomer, Shofu) and Fuji II LC (resin- modified glass ionomer cement, GC] using the ISO 4049 specifications. Materials and Method: Ten specimens of (25±0.2)mm x (2±0.1)mm x (2±0.1)mm from each material were prepared at 22-23ºC using a customized metal mould. After light polymerization, the specimens were stored in distilled water at 37ºC for 24 hours. The specimens were subsequently blotted dry, measured and subjected to flexural testing using an Instron Universal Testing Machine with a crosshead speed of 0.5mm/min. The flexural strengths were calculated from the maximum load exerted on the specimens. Data were analysed using one way ANOVA and scheffe’s post-hoc multiple comparison tests at a significance level of 0.05.Results: The results showed that the mean flexural strengths of Beautifil, Solare Anterior and Alpha-Dent were above 80 MPa and those of F2000 and Fuji II LC were below 80 MPa. The results of one-way ANOVA and Scheffe’s post-host tests demonstrated that Beautifil had significantly higher mean flexural strength compared to Fuji II LC, F2000 and Alpha-Dent (P
    Matched MeSH terms: Resins, Synthetic
  12. Fulltext Assessment of microleakage of few restorative materials after erosion by acidic solution
    Suhaida Sabdi, Wan Zaripah Wan Bakar, Adam Husein
    Archives of Orofacial Sciences, 2011;6(2):26-32.
    MyJurnal
    Some restorative materials are susceptible to erosion but whether it also causes microleakage is still questionable. The aim of this study was to assess the microleakage of few restorative materials after immersion in acidic solution. Standardized ‘U’ shaped cavity of 4mm diameter and 2mm depth were prepared on buccal or lingual surface of 52 human premolar and molar teeth. The teeth were divided into 4 groups which contains 13 samples and 3 controls for each and were restored either with Filtek Z250 (Group 1), Fuji IX (Group 2), Fuji II LC (Group 3), or Silverfill amalgam (Group 4).
    All surfaces were painted with nail varnish leaving only 2mm of tooth structure surrounding the restoration before the study samples were immersed in acidic solution, lemon juice (pH 2.74) and control samples in deionised distilled water for 24 hours. Surface photos for erosion were taken before immersion in methylene blue for 7 days. After sectioning, the assessment of dye penetration was done using Leica Imaging System DMLM (Germany). Photos showed that Fuji IX demonstrated severe erosion but no obvious changes were seen on other materials. Kruskal-Wallis test indicated that microleakage between all four groups were statistically significant. The most significant difference was between Filtek Z250 and Fuji IX (p
    Matched MeSH terms: Resins, Synthetic
  13. Fulltext Rapid isolation of genomic DNA from Asian green-lipped mussel (Perna viridis) for random amplified microsatellite polymorphism
    Chai, L.C., Fatimah, C.A., Norhisyam, M.S., Rozila, A., Nadzirah, A.S., Natasha, L.H.Y.
    International Food Research Journal, 2009;16(1):113-118.
    MyJurnal
    The objective of the present study was to develop a rapid, reliable and yet inexpensive protocol for genomic DNA extraction from frozen and ethanol-preserved Asian green-lipped mussels for random amplified microsatelite (RAM) analysis. The procedure comprised of three major steps: (1) Tissue degradation by boiling in 6% Chelex 100 resin in TE buffer; (2) Protein digestion by Proteinase K; and (3) DNA precipitation by adding 2 volumes of cold absolute ethanol. The entire procedure can be completed within two hours. The resulting RAM profiles were clear and reproducible. Our results demonstrate that the combined protocol of Chelex 100-Proteinase K-ethanol precipitation is a powerful yet economical DNA isolation method for population genetic studies involving a large sample size.
    Matched MeSH terms: Resins, Synthetic
  14. Fulltext Flexural and morphological properties of newly developed glass ionomer cement (GIC) with the incorporation of 3-acetylcoumarin
    Azlisham, N.A.F., Abdul Rahman, F.S., Mohamad, D.
    Malaysian Journal of Microscopy, 2015;11(1):11-15.
    MyJurnal
    The objective of the present study is to evaluate the effect of incorporation of 3- acetylcoumarin (3-AC), an antibacterial agent, on the mechanical and surface morphology of glass ionomer cement (GIC). A conventional GIC, Fuji II LC, was used as a control. 3-AC was incorporated into GIC during its manipulation at percentage of 2% and 5% (wt/wt). Flexural strength of the specimens were analysed using Shimadzu AGX-Plus while morphological evaluation of the specimens were observed using Scanning Electron Microscope (SEM). Oneway analysis (ANOVA) with post-hoc Bonferroni multiple-range test was used to determine the significant differences among the groups. Statistically, the incorporation of 2% (wt/wt) of 3-AC into GIC showed a significantly lower flexural strength (p
    Matched MeSH terms: Resins, Synthetic
  15. Fulltext Data on dissolved metals in Terengganu waters of South China Sea during pre-, post-, and Northeast Monsoon season
    Ariffin MM, Adiana G, Bidai J, Hing LS, Nurulnadia MY, Ong MC, et al.
    Data Brief, 2019 Dec;27:104806.
    PMID: 31788520 DOI: 10.1016/j.dib.2019.104806
    Metals are natural elements existed in the environment. However, due to the rapid development of urbanisation and economic, high content of anthropogenic metals are being perceived in polluting the environment. The oceans are known to be a part of the sinking basin for anthropogenic metals ends. Dataset provided is purposely to give an overview of dissolved metals spatial distribution in the South China Sea off the east Peninsular of Malaysia during the pre-, post- and Northeast (NE) Monsoon period. Seawater samples were collected in a grid of 18 stations at 3 different water depth. Dissolved metals were pre-concentrated on-board ship using Chelex-100 resin and analysed using Inductively Coupled Plasma Mass Spectrophotometry (ICPMS). The dataset shows the effect of NE Monsoon on dissolved metals spatial distribution mainly at the area closer to the land. Therefore, this dataset could reveal the past information on anthropogenic metals intrusion in the South China Sea, since Terengganu state was recently pointed to be one of the Malaysian waterfront city. Additionally, this dataset also could help in studying the cycle of metals in the southern South China Sea waters.
    Matched MeSH terms: Resins, Synthetic
  16. Allergic contact stomatitis caused by camphorquinone in a light cure periodontal dressing
    Chaubal TV, Bapat RA, Shetty D
    Contact Derm., 2017 Oct;77(4):251-252.
    PMID: 28872204 DOI: 10.1111/cod.12794
    Matched MeSH terms: Resins, Synthetic/adverse effects*
  17. Fulltext Neutron Activated Samarium-153 Microparticles for Transarterial Radioembolization of Liver Tumour with Post-Procedure Imaging Capabilities
    Hashikin NA, Yeong CH, Abdullah BJ, Ng KH, Chung LY, Dahalan R, et al.
    PLoS One, 2015;10(9):e0138106.
    PMID: 26382059 DOI: 10.1371/journal.pone.0138106
    Samarium-153 (153Sm) styrene divinylbenzene microparticles were developed as a surrogate for Yttrium-90 (90Y) microspheres in liver radioembolization therapy. Unlike the pure beta emitter 90Y, 153Sm possess both therapeutic beta and diagnostic gamma radiations, making it possible for post-procedure imaging following therapy.
    Matched MeSH terms: Resins, Synthetic/therapeutic use; Resins, Synthetic/chemistry
  18. Fulltext Growth Enhancement of Probiotic Pediococcus acidilactici by Extractive Fermentation of Lactic Acid Exploiting Anion-Exchange Resin
    Othman M, Ariff AB, Kapri MR, Rios-Solis L, Halim M
    Front Microbiol, 2018;9:2554.
    PMID: 30420842 DOI: 10.3389/fmicb.2018.02554
    Fermentation employing lactic acid bacteria (LAB) often suffers end-product inhibition which reduces the cell growth rate and the production of metabolite. The utility of adsorbent resins for in situ lactic acid removal to enhance the cultivation performance of probiotic, Pediococcus acidilactici was studied. Weak base anion-exchange resin, Amberlite IRA 67 gave the highest maximum uptake capacity of lactic acid based on Langmuir adsorption isotherm (0.996 g lactic acid/g wet resin) compared to the other tested anion-exchange resins (Amberlite IRA 410, Amberlite IRA 400, Duolite A7 and Bowex MSA). The application of Amberlite IRA 67 improved the growth of P. acidilactici about 67 times compared to the control fermentation without resin addition. Nevertheless, the in situ addition of dispersed resin in the culture created shear stress by resins collision and caused direct shear force to the cells. The growth of P. acidilactici in the integrated bioreactor-internal column system containing anion-exchange resin was further improved by 1.4 times over that obtained in the bioreactor containing dispersed resin. The improvement of the P. acidilactici growth indicated that extractive fermentation using solid phase is an effective approach for reducing by-product inhibition and increasing product titer.
    Matched MeSH terms: Resins, Synthetic
  19. Solid acid catalysts pretreatment and enzymatic hydrolysis of macroalgae cellulosic residue for the production of bioethanol
    Tan IS, Lee KT
    Carbohydr Polym, 2015 Jun 25;124:311-21.
    PMID: 25839825 DOI: 10.1016/j.carbpol.2015.02.046
    The aim of this study is to investigate the technical feasibility of converting macroalgae cellulosic residue (MCR) into bioethanol. An attempt was made to present a novel, environmental friendly and economical pretreatment process that enhances enzymatic conversion of MCR to sugars using Dowex (TM) Dr-G8 as catalyst. The optimum yield of glucose reached 99.8% under the optimal condition for solid acid pretreatment (10%, w/v biomass loading, 4%, w/v catalyst loading, 30min, 120°C) followed by enzymatic hydrolysis (45FPU/g of cellulase, 52CBU/g of β-glucosidase, 50°C, pH 4.8, 30h). The yield of sugar obtained was found more superior than conventional pretreatment process using H2SO4 and NaOH. Biomass loading for the subsequent simultaneous saccharification and fermentation (SSF) of the pretreated MCR was then optimized, giving an optimum bioethanol yield of 81.5%. The catalyst was separated and reused for six times, with only a slight drop in glucose yield.
    Matched MeSH terms: Resins, Synthetic/chemistry
  20. A practical three visit complete denture system
    Ling BC
    Ann R Australas Coll Dent Surg, 2000 Oct;15:66-8.
    PMID: 11709981
    Standard prosthodontic procedures require five visits to construct a set of complete maxillary and mandibular dentures. Various attempts have been made to reduce these procedures to four or three appointments. However, most of these techniques require the use of visible light polymerized resin as the final denture base materials. Visible light-cured resin materials have inferior physical properties and biocompatibility problems as compared with heat cured polymethylmethacrylate. This paper describes a system of complete denture construction which requires three clinical appointments instead of the usual five visits. This system is made possible by using the VLC base/tray material as the preliminary impression material as well as the application of a new biometric wax occlusion rim. It retains the use of polymethylmethacrylate as the denture base material. This system also utilizes all the procedures used in the conventional five appointment system of complete denture construction.
    Matched MeSH terms: Resins, Synthetic/chemistry
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links