Displaying publications 1 - 20 of 416 in total

Abstract:
Sort:
  1. Tan FSK
    Family Practitioner, 1985;8:26-29.
    Matched MeSH terms: Iron; Anemia, Iron-Deficiency
  2. BOERMAN AJ
    Med J Malaysia, 1963 Sep;18:5-7.
    PMID: 14064301
    Matched MeSH terms: Iron*; Iron-Dextran Complex*
  3. Mohamad N, Ubaidillah, Mazlan SA, Imaduddin F, Choi SB, Yazid IIM
    PLoS One, 2018;13(4):e0191795.
    PMID: 29630595 DOI: 10.1371/journal.pone.0191795
    In this study, a new magnetorheological (MR) grease was made featuring plate-like carbonyl iron (CI) particles, and its magnetic field-dependent rheological properties were experimentally characterized. The plate-like CI particles were prepared through high-energy ball milling of spherical CI particles. Then, three different ratios of the CI particles in the MR grease, varying from 30 to 70 wt% were mixed by dispersing the plate-like CI particles into the grease medium with a mechanical stirrer. The magnetic field-dependent rheological properties of the plate-like CI particle-based MR grease were then investigated using a rheometer by changing the magnetic field intensity from 0 to 0.7 T at room temperature. The measurement was undertaken at two different modes, namely, a continuous shear mode and oscillation mode. It was shown that both the apparent viscosity and storage modulus of the MR grease were heavily dependent on the magnetic field intensity as well as the CI particle fraction. In addition, the differences in the yield stress and the MR effect between the proposed MR grease featuring the plate-like CI particles and the existing MR grease with the spherical CI particles were investigated and discussed in detail.
    Matched MeSH terms: Iron/chemistry*
  4. Mydin MAO, Nawi MNM, Omar R, Khadimallah MA, Ali IM, Deraman R
    Chemosphere, 2023 Mar;317:137661.
    PMID: 36608888 DOI: 10.1016/j.chemosphere.2022.137661
    Efforts to modify cement-based mixtures have continuously engrossed the interest of academics. Favourable impacts of nanoparticles, for instance, fine particle size and great reactivity, have made them be utilized in concrete. Foamed concrete (FC) is immensely porous, and its properties diminish with an increase in the number of pores. To enhance its properties, the FC matrix could be attuned by integrating numerous nanoparticles. The influence of ferrous-ferric oxide nanoparticles (FFO-NP) in FC was not discovered previously in the present body of knowledge. Thus, there is some uncertainty contemplating the mechanism to which extent the FFO-NP can affect the durability properties of FC. Hence, this study focuses on utilizing FFO-NP in the FC matrix. FC specimens with a density of 1000 kg/m3 were cast and tested. The objective was to assess the influence of different FFO-NP weight fractions (0.10%, 0.15%, 0.20%, 0.25%, 0.30%, and 0.35%) on durability properties such as drying shrinkage, porosity, water absorption and ultrasonic wave propagation velocity of FC. The results implied that the presence of a 0.25% weight fraction of FFO-NP in FC facilitates optimal water absorption, porosity, ultrasonic pulse velocity and drying shrinkage of FC. The presence of FFO-NP alters the microstructural of FC from loose needle-like into a dense cohesive microstructure of the cementitious composite. Besides, FFO-NP augments the FC matrix by filling the voids, microcracks, and spaces within the structure. Further than the ideal weight fraction of FFO-NP addition, the accretion of the FFO-NP was found, which caused a decline in durability properties.
    Matched MeSH terms: Iron*
  5. Ahmad M, Aziz ARA, Mazari SA, Baloch AG, Nizamuddin S
    Environ Sci Pollut Res Int, 2020 Jul;27(21):26239-26248.
    PMID: 32358758 DOI: 10.1007/s11356-020-08940-9
    Photo-Fenton oxidation is one of the most promising processes to remove recalcitrant contaminants from industrial wastewater. In this study, we developed a novel heterogeneous catalyst to enhance photo-Fenton oxidation. Multi-composition (Fe-Cu-Zn) on aluminosilicate zeolite (ZSM-5) was prepared using a chemical process. Subsequently, the synthesized catalyst was characterized by using X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray (spectroscopy) (EDX), and Brunauer-Emmett-Teller (BET). Activity of the synthesized catalyst is analysed to degrade an azo dye, methyl orange. Taguchi method is used to optimize color removal and total carbon content (TOC) removal. The dye completely degraded, and 76% of TOC removal was obtained at optimized process conditions. The amount of catalyst required for the desired degradation of dye significantly reduced up to 92% and 30% compared to conventional homogenous and heterogeneous Fenton oxidation processes, respectively.
    Matched MeSH terms: Iron*
  6. Wise SK, Damask C, Roland LT, Ebert C, Levy JM, Lin S, et al.
    Int Forum Allergy Rhinol, 2023 Apr;13(4):293-859.
    PMID: 36878860 DOI: 10.1002/alr.23090
    BACKGROUND: In the 5 years that have passed since the publication of the 2018 International Consensus Statement on Allergy and Rhinology: Allergic Rhinitis (ICAR-Allergic Rhinitis 2018), the literature has expanded substantially. The ICAR-Allergic Rhinitis 2023 update presents 144 individual topics on allergic rhinitis (AR), expanded by over 40 topics from the 2018 document. Originally presented topics from 2018 have also been reviewed and updated. The executive summary highlights key evidence-based findings and recommendation from the full document.

    METHODS: ICAR-Allergic Rhinitis 2023 employed established evidence-based review with recommendation (EBRR) methodology to individually evaluate each topic. Stepwise iterative peer review and consensus was performed for each topic. The final document was then collated and includes the results of this work.

    RESULTS: ICAR-Allergic Rhinitis 2023 includes 10 major content areas and 144 individual topics related to AR. For a substantial proportion of topics included, an aggregate grade of evidence is presented, which is determined by collating the levels of evidence for each available study identified in the literature. For topics in which a diagnostic or therapeutic intervention is considered, a recommendation summary is presented, which considers the aggregate grade of evidence, benefit, harm, and cost.

    CONCLUSION: The ICAR-Allergic Rhinitis 2023 update provides a comprehensive evaluation of AR and the currently available evidence. It is this evidence that contributes to our current knowledge base and recommendations for patient evaluation and treatment.

    Matched MeSH terms: Iron-Dextran Complex*
  7. Sim DKL, Mittal S, Zhang J, Hung CL, Azman WAW, Choi JO, et al.
    Int J Cardiol, 2024 May 15;403:131890.
    PMID: 38382854 DOI: 10.1016/j.ijcard.2024.131890
    BACKGROUND: Iron deficiency is a common comorbidity in heart failure (HF) and is independently associated with a worse quality-of-life and exercise capacity, as well as increased risk of hospitalization, regardless of anemia status. Although international guidelines have provided recommendations for the management of iron deficiency in patients with HF, guidelines in Asia are less established, and practical use of guidelines for management of iron deficiency is limited in the region.

    METHODS: A panel comprising cardiologists from China, Hong Kong, India, Japan, Malaysia, Pakistan, Philippines, Singapore, South Korea, Taiwan, and Thailand convened to share insights and provide guidance for the optimal management of iron deficiency in patients with HF, tailored for the Asian community.

    RESULTS: Expert opinions were provided for the screening, diagnosis, treatment and monitoring of iron deficiency in patients with HF. It was recommended that all patients with HF with reduced ejection fraction should be screened for iron deficiency, and iron-deficient patients should be treated with intravenous iron. Monitoring of iron levels in patients with HF should be carried out once or twice yearly. Barriers to the management of iron deficiency in patients with HF in the region include low awareness of iron deficiency amongst general physicians, lack of reimbursement for screening and treatment, and lack of proper facilities for administration of intravenous iron.

    CONCLUSIONS: These recommendations provide a structured approach to the management of iron deficiency in patients with HF in Asia.

    Matched MeSH terms: Iron/therapeutic use
  8. Le Nguyen Bao K, Tran Thuy N, Nguyen Huu C, Khouw I, Deurenberg P
    Asia Pac J Public Health, 2016 07;28(5 Suppl):94S-102S.
    PMID: 27052301 DOI: 10.1177/1010539516641506
    In a population sample of 385 children, 6 to 11 years old, venous blood parameters-hemoglobin (Hb), ferritin, red blood cell count (RBC), mean corpuscular volume (MCV), mean corpuscular hemoglobin (MCH), mean corpuscular hemoglobin concentration (MCHC), C-reactive protein (CRP), and α1-acid glycoprotein (AGP)-were determined to get insight into the iron status. The prevalence of anemia was 11.4%; 5.6% had iron deficiency (ID), whereas 0.4% had ID anemia. Correction for inflammation based on CRP and AGP did not markedly change the overall prevalence of ID and ID anemia. Stunted children had lower Hb and ferritin values compared with nonstunted children, and thin children had lower values compared with normal-weight or overweight and obese children. Many nonanemic children had alert values for RBC, MCV, MCH, and MCHC. It is concluded that although the prevalence of anemia is of the magnitude of a mild public health problem, the iron status of many nonanemic children is borderline, as indicated by a high number of children with low values for red blood cytology.
    Matched MeSH terms: Iron/blood; Iron/deficiency*; Anemia, Iron-Deficiency/epidemiology*
  9. Loh TT, Sinnathuray TA
    Aust N Z J Obstet Gynaecol, 1971 Nov;11(4):254-8.
    PMID: 5289727
    Matched MeSH terms: Iron/analysis*; Iron/blood
  10. Fan K, Chen L, Li H, Lim JW, Lin C, Qin J, et al.
    J Hazard Mater, 2024 Oct 05;478:135633.
    PMID: 39182296 DOI: 10.1016/j.jhazmat.2024.135633
    Contamination of rice by arsenic represents a significant human health risk. Roxarsone -bearing poultry manure is a major pollution source of arsenic to paddy soils. A mesocosm experiment plus a laboratory experiment was conducted to reveal the role of rainwater-borne H2O2 in the degradation of roxarsone in paddy rice soils. While roxarsone could be degraded via chemical oxidation by Fenton reaction-derived hydroxyl radical, microbially mediated decomposition was the major mechanism. The input of H2O2 into the paddy soils created a higher redox potential, which favored certain roxarsone-degrading and As(III)-oxidizing bacterial strains and disfavored certain As(V)-reducing bacterial strains. This was likely to be responsible for the enhanced roxarsone degradation and transformation of As(III) to As(V). Fenton-like reaction also tended to enhance the formation of Fe plaque on the root surface, which acted as a filter to retain As. The dominance of As(V) in porewater, combined with the filtering effect of Fe plaque significantly reduced the uptake of inorganic As by the rice plants and consequently its accumulation in the rice grains. The findings have implications for developing management strategies to minimize the negative impacts from the application of roxarsone-containing manure for fertilization of paddy rice soils.
    Matched MeSH terms: Biodegradation, Environmental; Iron/metabolism; Iron/chemistry
  11. Keowmani T, Teo SC, Yap KC, Chua WL, Mohd Tahir NF, Chua PW, et al.
    Hemoglobin, 2023 Nov;47(6):237-244.
    PMID: 38111324 DOI: 10.1080/03630269.2023.2295291
    BACKGROUND: Adherence to iron chelation therapy (ICT) remains an issue among thalassemia patients. This study aimed to determine the prevalence of non-adherence to ICT among children with beta thalassemia major in Malaysia and the factors associated with it.

    METHODS: This was a cross-sectional study conducted between November 2019 and November 2021 at seven tertiary hospitals in Malaysia. Participants registered with Malaysian Thalassemia Registry were recruited by convenience sampling. Adherence was measured via pill count and self-reported adherence. Knowledge about thalassemia and ICT was measured using a questionnaire from Modul Thalassemia by Ministry of Health of Malaysia. A decision tree was used to identify predictors of non-adherence.

    RESULTS: A total of 135 patients were recruited. The prevalence of non-adherence to ICT in those who took subcutaneous ± oral medications was 47.5% (95% CI: 31.5%, 63.9%) and the prevalence of non-adherence to ICT in those who took oral medications only was 21.1% (95% CI: 13.4%, 30.6%). The median knowledge score was 67.5% (IQR 15%). A decision tree has identified two factors associated with non-adherence. They were ICT's route of administration and knowledge score. Out of 100 patients who were on oral medications only, 79 were expected to adhere. Out of 100 patients who were on subcutaneous ± oral medications and scored less than 56.25% in knowledge questionnaire, 86 were expected to non-adhere. Based on the logistic regression, the odds of non-adherence in patients who took oral medications only was 71% lower than the odds of non-adherence in patients who took subcutaneous ± oral medications (OR = 0.29; 95% CI = 0.13, 0.65; p = .002).

    CONCLUSION: The prevalence of non-adherence to ICT among children with beta thalassemia major in Malaysia was 20/95 (21.1%) in those who took oral medications only and the prevalence of non-adherence was 19/40 (47.5%) in those who took subcutaneous ± oral medications. The factors associated with non-adherence were ICT's route of administration and knowledge score.

    Matched MeSH terms: Iron; Iron Chelating Agents/therapeutic use
  12. Wbin-Wan-Ibrahim WA, Mirza EH, Akbar Ali SF
    Pak J Pharm Sci, 2013 Jul;26(4):823-6.
    PMID: 23811465
    Heavy metals in cigarette tobacco such as iron may cause a serious damage on human health. Surveys showed that the accumulation of certain toxic heavy metals like cadmium, mercury, iron is very often due to the effect of smoking. This work involved 15 volunteers in two randomly divided groups having the habit of cigarette smoking over 15 cigarettes / day. Concentration level of iron in blood and urine before and after treatment using the herbal medicine, widely used in Europe, is analyzed. Determination of Iron concentration in blood and urine was calculated by Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) according to the procedure DIN EN ISO 11885 ("E22" from April 1998). The analysis shows that the concentration of iron in blood and urine samples in both groups increased in some volunteers instead of decrease. The independent T-test shows that the mean of iron concentration in the group A and group B had no significant difference (p>0.05). The results suggested that the herbal medicine under test does not have significant influence on reduction of iron concentration levels.
    Matched MeSH terms: Iron/metabolism*
  13. George E, Adeeb N, Ahmad J
    Med J Malaysia, 1980 Dec;35(2):129-30.
    PMID: 7266404
    Serum ferritin concentration has been measured in pregnant women at their first antenatal visit. Results were analysed according to trimesters. With progression of the pregnancy there is a fall in serum ferritin concentrations. Haemoglobin and red cell indices cannot be used to predict iron status supplemental iron therapy raised the serum ferritin levels.
    Matched MeSH terms: Iron/metabolism*
  14. Norhaniza R, Mazlan SA, Ubaidillah U, Sedlacik M, Aziz SAA, Nazmi N, et al.
    Sensors (Basel), 2021 Feb 28;21(5).
    PMID: 33670872 DOI: 10.3390/s21051660
    Magnetoactive (MA) foam, with its tunable mechanical properties and magnetostriction, has the potential to be used for the development of soft sensor technology. However, researchers have found that its mechanical properties and magnetostriction are morphologically dependent, thereby limiting its capabilities for dexterous manipulation. Thus, in this work, MA foam was developed with additional capabilities for controlling its magnetostriction, normal force, storage modulus, shear stress and torque by manipulating the concentration of carbonyl iron particles (CIPs) and the magnetic field with regard to morphological changes. MA foams were prepared with three weight percentages of CIPs, namely, 35 wt.%, 55 wt.% and 75 wt.%, and three different modes, namely, zero shear, constant shear and various shears. The results showed that the MA foam with 75 wt.% of CIPs enhanced the normal force sensitivity and positive magnetostriction sensitivity by up to 97% and 85%, respectively. Moreover, the sensitivities of the storage modulus, torque and shear stress were 8.97 Pa/mT, 0.021 µN/mT, and 0.0096 Pa/mT, respectively. Meanwhile, the magnetic dipolar interaction between the CIPs was capable of changing the property of MA foam from a positive to a negative magnetostriction under various shear strains with a low loss of energy. Therefore, it is believed that this kind of highly sensitive MA foam can potentially be implemented in future soft sensor systems.
    Matched MeSH terms: Iron; Iron Carbonyl Compounds
  15. Alavi R, Akbarzadeh AH, Hermawan H
    J Mech Behav Biomed Mater, 2021 05;117:104413.
    PMID: 33640846 DOI: 10.1016/j.jmbbm.2021.104413
    In-depth analyses of post-corrosion mechanical properties and architecture of open cell iron foams with hollow struts as absorbable bone scaffolds were carried out. Variations in the architectural features of the foams after 14 days of immersion in a Hanks' solution were investigated using micro-computed tomography and scanning electron microscope images. Finite element Kelvin foam model was developed, and the numerical modeling and experimental results were compared against each other. It was observed that the iron foam samples were mostly corroded in the periphery regions. Except for quasi-elastic gradient, other mechanical properties (i.e. compressive strength, yield strength and energy absorbability) decreased monotonically with immersion time. Presence of adherent corrosion products enhanced the load-bearing capacity of the open cell iron foams at small strains. The finite element prediction for the quasi-elastic response of the 14-day corroded foam was in an agreement with the experimental results. This study highlights the importance of considering corrosion mechanism when designing absorbable scaffolds; this is indispensable to offer desirable mechanical properties in porous materials during degradation in a biological environment.
    Matched MeSH terms: Iron*
  16. Ahmad A, Jamil SNAM, Shean Yaw Choong T, Abdullah AH, Mastuli MS, Othman N, et al.
    Polymers (Basel), 2019 Dec 04;11(12).
    PMID: 31817283 DOI: 10.3390/polym11122011
    This paper describes the preparation, characterisation, and potential application of flexible palm oil-based polyurethane foam (PUF) as a support for iron-silica (Fe-Si) adsorbent. Fe-Si/polyurethane composite (Fe-Si/PUC) was prepared by impregnating Fe-Si adsorbent onto the surface of PUF by using a novel immersion-drying method. Morphological analysis of Fe-Si/PUC proved that Fe-Si was successfully impregnated onto the surface of PUF. Compression test and thermogravimetric analysis were carried out to determine the flexibility and thermal stability of Fe-Si/PUC, respectively. The Fe-Si/PUC removed 90.0% of 10 ppm methylene blue (MB) from aqueous solution in 60 min. The reusability study showed that Fe-Si/PUC removed 55.9% of MB on the seventh cycle. Hence, the synthesis of Fe-Si/PUC opens up a new path of implementing palm oil-based PUF to assist in the recovery of an adsorbent for environmental clean-up. The mechanism of physical interaction during the impregnation of Fe-Si adsorbent onto PUF was proposed in this paper.
    Matched MeSH terms: Iron; Iron, Dietary
  17. Ahmad P, Khandaker MU, Khan A, Rehman F, Din SU, Ali H, et al.
    Biomed Res Int, 2022;2022:3605054.
    PMID: 36420094 DOI: 10.1155/2022/3605054
    A simple process based on the dual roles of both magnesium oxide (MgO) and iron oxide (FeO) with boron (B) as precursors and catalysts has been developed for the synthesis of borate composites of magnesium and iron (Mg2B2O5-Fe3BO6) at 1200°C. The as-synthesized composites can be a single material with the improved and collective properties of both iron borates (Fe3BO6) and magnesium borates (Mg2B2O5). At higher temperatures, the synthesized Mg2B2O5-Fe3BO6 composite is found thermally more stable than the single borates of both magnesium and iron. Similarly, the synthesized composites are found to prevent the growth of both gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) pathogenic bacteria on all the tested concentrations. Moreover, the inhibitory effect of the synthesized composite increases with an increase in concentration and is more pronounced against S. aureus as compared to E. coli.
    Matched MeSH terms: Iron*
  18. Nazmi NASM, Razak FIA, Mokhtar WNAW, Ibrahim MNM, Adam F, Yahaya N, et al.
    Environ Sci Pollut Res Int, 2022 Jan;29(1):1009-1020.
    PMID: 34341936 DOI: 10.1007/s11356-021-15733-1
    The world faces the challenge to produce ultra-low sulfur diesel with low-cost technology. Therefore, this research emphasised on production of low sulfur fuel utilising nanoparticle catalyst under mild condition. A small amount of cobalt oxide (10-30 wt%) was introduced into the Fe/Al2O3 catalyst through the wet impregnation method. Cobalt modification induces a positive effect on the performance of the iron catalyst. Hence, the insertion of cobalt species into Fe/Al2O3 led to the formation of lattice fringes in all directions which resulted in the formation of Co3O4 and Fe3O4 species. The optimised catalyst, Co/Fe-Al2O3, calcined at 400 °C with a dopant ratio of 10:90 indicating the highest desulfurisation activity by removing 96% of thiophene, 100% of dibenzothiophene (DBT) and 92% of 4,6-dimethyl dibenzothiophene (4,6-DMDBT). Based on the density functional theory (DFT) on Co/Fe-Al2O3, two pathways with the overall energy of -40.78 eV were suggested for the complete oxidation of DBT.
    Matched MeSH terms: Iron*
  19. Yong SN, Lee WS, Chieng S, Lim S, Kuan SH
    Appl Microbiol Biotechnol, 2023 Aug;107(15):4789-4801.
    PMID: 37314456 DOI: 10.1007/s00253-023-12622-0
    Conventional techniques to remove Fe impurities in kaolin typically involve high environmental impact and cost. Alternative methods have been focused on the use of bioleaching where Fe in kaolin is reduced with microorganisms. Early results established a noticeable effect of the bacteria on the redox state of Fe, but knowledge gaps persist such as details on the bacterial-kaolin interactions during attachment of bacteria onto kaolin surface, the metabolites produced by bacteria, and changes in Fe(II)/Fe(III) ion equilibria in solution. To bridge these gaps, this study was conducted to determine the detailed physicochemical changes in bacteria and kaolin during bioleaching through surface, structural, and chemical analysis. Bioleaching experiments were conducted for 10 days where each of the three Bacillus sp. was put in contact (at 9 × 108 CFU) with 20 g of kaolin powder using 200 mL of 10 g/L glucose solution. All samples treated with bacteria showed increasing trends in Fe(III) reduction up until day 6 or 8 followed by a slight decrease towards the end of the ten-day period. Examination of scanning electron microscope (SEM) images suggests that bacterial activity damaged the edges of kaolin particles during bioleaching. Ion chromatography (IC) results showed that during bioleaching, Bacillus sp. produced organic acids such as lactic acid, formic acid, malic acid, acetic acid, and succinic acid. EDS analysis of kaolin before and after bioleaching showed Fe removal efficiencies of up to 65.3%. Analyses of color properties of kaolin before and after bioleaching showed an improvement in whiteness index of up to 13.6%. KEY POINTS: • Dissolution of iron oxides by Bacillus species proven with phenanthroline analysis. • Organic acid type and concentration unique to species detected during bioleaching. • Whiteness index of kaolin is improved after bioleaching.
    Matched MeSH terms: Iron/metabolism
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links