Displaying all 19 publications

Abstract:
Sort:
  1. Thayer KE
    Dent J Malaysia Singapore, 1969 May;9(1):15-21.
    PMID: 4897856
    Matched MeSH terms: Denture, Partial, Fixed
  2. Ang Y, Tan CG, Yahaya N
    Dent Mater J, 2021 May 29;40(3):584-591.
    PMID: 33328396 DOI: 10.4012/dmj.2020-213
    This study aimed to investigate the effect of various framework designs on the failure of posterior fiber reinforced composite (FRC) bridges and assess the post crack performances of the repaired prostheses. Thirty samples were prepared into three different groups of framework designs: cuspal support (CS), anatomic features (AF) and circular reinforcement (CR). All specimens were subjected to static loading test and acoustic emission analysis. Significant differences were found in the load and time of initial failures among the three groups (p<0.001). CS was identified as the optimum framework design. Samples with composite delamination at the pontic site were selected and repaired with a clinically simplified protocol. Significant differences were also observed between the repaired and original FRC bridges (p=0.01). The performance of these prostheses was highly dependent on the framework design and the perspective of repairing FRC bridges may warrant future investigations.
    Matched MeSH terms: Denture, Partial, Fixed*
  3. Lim TW, Idris RI, Mahmud M
    Clin Exp Dent Res, 2023 Dec;9(6):1089-1095.
    PMID: 37622386 DOI: 10.1002/cre2.774
    OBJECTIVE: Resin-bonded fixed dental prostheses (RBFDPs) cemented at an increased occlusal vertical dimension (OVD) (the Dahl concept) to create space for a metal retainer remains controversial because of the lack of reported clinical studies. This study analyzed the demographic (age and sex) and clinical factors (location and arch of prosthesis) affecting the patients' perception of RBFDPs cemented at an increased OVD.

    MATERIAL AND METHODS: Twenty-eight participants treated with cantilevered RBFDP at an increased OVD were prospectively recruited. They were asked to answer a validated patient satisfaction questionnaire based on six parameters during the 12-week review visit.

    RESULTS: 71.4% of the participants were completely satisfied with the color, shape, and function. Twenty-one (75%) participants reported no complaints about the prostheses. 89.3% will recommend this treatment option to others. There was a significant difference between males and females in avoiding loading on the prostheses (p = 0.015). The level of satisfaction did not differ by age, ethnicity, location, and arch of the prostheses (p > 0.05).

    CONCLUSIONS: Patient satisfaction toward RBFDP cemented by using the Dahl approach was generally high on all the parameters at the 12-week review visit.

    Matched MeSH terms: Denture, Partial, Fixed, Resin-Bonded*
  4. Mohd Faiz Nasruddin, Theocharospoulos, Antonios, Ray, Noel, Burke, Francis M.
    MyJurnal
    Fitting accuracy of dental prostheses is essential for clinical success. An ideal marginal and internal fit will minimize plaque accumulation, gingival irritation, cement dissolution and micro leakage as well as enhancing the mechanical behaviour of a fixed partial denture (FPD) (1). Unfortunately, there is disagreement about acceptable marginal and internal fit discrepancies of FPD’s (2) from 75-200μm. There are two main manufacturing routes of CAD/CAM FPD’s: the subtractive and the additive route. The subtractive route is a top-down approach which involves milling the desired article out of a block of the material of choice using a series of burs. This route is currently the most common CAD/CAM technique for the fabrication of metal alloy FPD’s. The additive route is a bottom-up approach where the desired article is fabricated layer by layer out of the material of choice. Examples include selective laser sintering and selective laser melting for metal alloy FPD’s.
    Matched MeSH terms: Denture, Partial, Fixed
  5. Lui, J.L.
    Ann Dent, 2008;15(1):48-54.
    MyJurnal
    Besides other indications, the spring cantilever bridge can solve the difficult clinical problem of providing diastema on either side of a pontic. Unlike the conventional bridges, it has a somewhat controversial design in that the anterior pontic is connected to its retainer on a posterior abutment by a relatively long flexible palatal bar. This paper presents a case report of a spring bridge which fractured due to metal fatigue after 30 years of continued service. Other studies reported a mean life span of 8-10 years for conventional bridges. The advantages of the spring cantilever bridge are also discussed.
    Matched MeSH terms: Denture, Partial, Fixed
  6. Kohli S, Bhatia S, Al-Haddad A, Pulikkotil SJ, Jamayet NB
    J Prosthodont, 2022 Feb;31(2):102-114.
    PMID: 34516686 DOI: 10.1111/jopr.13433
    PURPOSE: This is a systematic review to identify the incidence of pulp necrosis and/or periapical changes among vital teeth which are used as an abutment for crown and fixed partial dentures (FPDs).

    MATERIALS AND METHODS: Two reviewers independently searched two electronic databases, PubMed and Scopus. The search was complemented from references of included studies and published reviews. Studies published in the English language through January 2021 that had assessed and documented the clinical and radiographic failure of crown or FPD in vital permanent teeth due to pulpal or periapical pathology with a follow-up of at least 12 months were selected. Data screening, data collection and extraction of data was performed. Quality of studies involved was analyzed using the Newcastle-Ottawa Quality Assessment Scale for cohort studies. Meta-analysis was done using random effects model. Publication bias was assessed using funnel plots.

    RESULTS: Electronic searches provided 10,075 records among which 20 studies were selected for systematic review and 7 studies were selected for meta-analysis. With respect to quality assessment, all the studies involved were considered as high quality as the score in scale ranged between 6 and 9 as per the Newcastle-Ottawa Quality Assessment Scale for cohort studies. The meta-analyses showed that there was no statistically significant difference in the incidence of the loss of pulp vitality or pulp necrosis through clinical and radiographic examination with the follow up period of 5 years: p < 0.001, 95% CI: 0.96-1.00, I2 = 77.84%; 10 years: p < 0.001, 95% CI: 0.88-0.95, I2 = 93.59%; 15 years: p < 0.001, 95% CI: 0.92-0.96, I2 = 94.83%; and 20 years: p < 0.001, 95% CI: 0.94-0.96, I2 = 95.01%.

    CONCLUSIONS: The meta-analysis revealed clinical and radiographic success rate ranging between 92% to 98% at different follow up periods ranging between 5 years and 20 years. Future high-quality randomized clinical controlled trials with a larger population are required to confirm the evidence as only observational studies were considered in this paper.

    Matched MeSH terms: Denture, Partial, Fixed
  7. Modi R, Kohli S, Rajeshwari K, Bhatia S
    Eur J Dent, 2015 6 4;9(2):255-261.
    PMID: 26038660 DOI: 10.4103/1305-7456.156847
    OBJECTIVE: The aim of the study is to evaluate the stress distribution in tooth supported 5-unit fixed partial denture (FPD) having tooth as pier abutment using rigid and nonrigid connectors respectively, under simultaneous and progressive loading.

    MATERIAL AND METHODS: The three-dimensional (3D) finite element program (ANSYS software) was used to construct the mathematical model. Two 5-unit FPD'S were simulated, one with rigid connector and another one with nonrigid connector. For analysis, each of these models were subjected to axial and oblique forces under progressive loading (180, 180, 120, 120, 80 N force on first and second molars, premolars and canine respectively) and simultaneous loading (100, 100, 100, 100, 100 N force on first and second molars, premolars and canine respectively).

    RESULTS: The rigid and nonrigid connector design have effect on stress distribution in 5-unit FPDs with pier abutments.

    CONCLUSION: Oblique forces produce more stresses than vertical forces. Nonrigid connector resulted in decrease in stress at the level of prosthesis and increase in stress at the level of alveolar crest.

    Matched MeSH terms: Denture, Partial, Fixed
  8. Abdul Aziz, A, Ahmad, S.F., Muslim, Y.R
    Ann Dent, 2006;13(1):34-38.
    MyJurnal
    This clinical case report details the clinical sequence of a 78-year-old male receiving prosthetic rehabilitation using an implant-supported screwretained fixed partial denture. Despite the limitations imposed, the aesthetic and functional demands of the patient were fulfilled by this prosthetic rehabilitation. The importance of detailed prosthetic planning and evaluation prior to implant surgery is essential, therefore ideally, it should be done by the same operator or a team of operators working together. Problems can arise when the construction of the prosthesis is performed by other people who are not involved in the planning stage.
    Matched MeSH terms: Denture, Partial, Fixed
  9. Nik Madihah Nik Azis, Khamiza Zainol Abidin
    MyJurnal
    The practice of quack dentistry worldwide is a challenge to the profession of dentistry as it undermines the trust of the general public and places the patients at unnecessary risks through their illegal practices. Although the ratio of patients to dentists is rapidly decreasing in Malaysia due to the increased output of qualified dentists from both local and foreign institutions, quack dentistry is still practiced in many areas. This report intends to highlight a popular treatment prescribed by these quack dentists which is removable partial dentures that is fixed to the adjacent teeth by cold cure acrylic. We also aim to discuss the design of the denture and the means employed to remove this ’fixed partial denture’. It is hoped that this case report will highlight the prevalence of the practice of quack dentistry especially in geographical area of this case report and allow the authorities to devise means to stop this illegal practice.
    Matched MeSH terms: Denture, Partial, Fixed
  10. Yanti Johari, Zaihan Ariffin, Haslina Taib, Norehan Mokhtar
    MyJurnal
    Resin-bonded fibre-reinforced composite bridges provide many advantages over the conventional
    bridges or implant treatment in the management of a traumatically or congenitally missing anterior tooth.
    Furthermore, there is an increasing demand towards providing a metal free resin-bonded bridges over the alloybased
    restorations in order to meet the aesthetic needs especially in the anterior region. Advances in the
    adhesive technology and tooth colored materials offer improved bonding system and better aesthetic outcome.
    Nevertheless, careful selection of cases to receive this type of approach is also one of the key factor to ensure
    the clinical survival of fibre-reinforced composite bridges. This report aims to present the use of fibre-reinforced
    composite to construct indirect cantilever fibre-reinforced composite bridges as part of minimum intervention
    dentistry.
    Matched MeSH terms: Denture, Partial, Fixed, Resin-Bonded
  11. Raza Kazmi SM, Iqbal Z, Muneer MU, Riaz S, Zafar MS
    Eur J Dent, 2018 8 28;12(3):375-379.
    PMID: 30147402 DOI: 10.4103/ejd.ejd_232_18
    Objective: The current study aimed to assess the knowledge and practice of pontic design selection by the general dental practitioners (GDPs) in the light of contemporary guidelines.

    Materials and Methods: This cross-sectional study was conducted among the GDPs of Karachi. A questionnaire was designed to collect data from 100 GDPs. The questionnaire included general/demographic information (practitioner's education, experience, and place of practice) and an average number of fixed prosthesis constructed by the GDP. The questionnaire was further categorized to evaluate the knowledge/practice of pontic design selection and latest recommendations.

    Results: For the maxillary anterior segment, the ridge lap pontic was the most common (32%) followed by the modified ridge lap (28%). In the maxillary posterior segment, the ridge lap pontic was the most common (37%) followed by sanitary design (34%). For the mandibular anterior segment, the modified ridge lap (50%) was the most common followed by ridge lap pontic (17%). In case of the mandibular posterior segment, the sanitary design (34%) was the most common followed by ridge lap pontic (30%).

    Conclusions: The pontic design selection for the fixed prosthesis is a neglected domain. The contemporary guidelines are not followed with full spirit by the GDPs leading to wide variations in the pontic design selection.

    Matched MeSH terms: Denture, Partial, Fixed
  12. Taiyeb-Ali TB, Toh CG, Siar CH, Seiz D, Ong ST
    Implant Dent, 2009 Oct;18(5):438-46.
    PMID: 22129962 DOI: 10.1097/ID.0b013e3181ad8e7a
    To compare the clinical soft tissue responses around implant tooth-supported 3-unit bridges using tapered abutments with those using butt-joint abutments.
    Matched MeSH terms: Denture, Partial, Fixed*
  13. Yunus N, Masood M, Saub R, Al-Hashedi AA, Taiyeb Ali TB, Thomason JM
    Clin Oral Implants Res, 2016 Jul;27(7):904-9.
    PMID: 26173463 DOI: 10.1111/clr.12657
    OBJECTIVE: To assess the oral health-related quality of life (OHRQoL) of patients provided with mandibular implant fixed partial prostheses (IFPP) for rehabilitation of two adjacent missing posterior teeth and complete denture patients provided with mandibular implant-supported overdenture (ISOD). The response to change in OHRQoL with implant prostheses was additionally compared.

    MATERIAL AND METHODS: In this prospective study, 20 IFPP (mean age 47.0; SD 12.9 years) and 28 ISOD (mean age 61.5; SD 9.1 years) patients received 2 mandibular implants. Metal ceramic nonsplinted fixed prostheses were provided in IFPP group, while in ISOD group, the mandibular overdentures were retained by nonsplinted attachments. Patients rated their oral health-related quality of life using OHIP-14 Malaysian version at baseline (T0), 2-3 months (T1) and 1 year (T2) postimplant treatment. Mean OHIP-14 for total and domain scores between groups and intervals was analysed using repeated-measures ANOVA and t-test. Mann-Whitney and Wilcoxon signed-rank tests were used for the comparison of mean score change and effect size, while the association between pre- and post-treatment scores was determined using multivariate linear regression modelling.

    RESULTS: The total OHIP and domain scores before implant treatment were significantly higher (lower OHRQoL) in IFPP than in ISOD groups, except for physical pain where this domain showed similar impact in both groups. Postimplant scores between groups at T1 and T2 showed no significant difference. The mean score changes at T0-T1 and T0-T2 for total OHIP-14 and domains were significantly greater in IFPP except in the domains of physical pain and disability which showed no difference. Large effect size (ES) was observed for total OHIP-14 in IFPP while moderate in ISOD. Improved OHRQoL was dependent on the treatment group and pretreatment score.

    CONCLUSION: Improvement in OHRQoL occurred following both mandibular implant-supported overdentures and implant fixed partial prostheses.

    Matched MeSH terms: Denture, Partial, Fixed*
  14. Rana R, Ramachandra SS, Lahori M, Singhal R, Jithendra KD
    Contemp Clin Dent, 2013 Oct;4(4):556-8.
    PMID: 24403810 DOI: 10.4103/0976-237X.123090
    Ideal alveolar ridge width and height allows placement of a natural appearing pontic, which provides maintenance of a plaque-free environment. The contour of a partially edentulous ridge should be thoroughly evaluated before a fixed partial denture is undertaken. Localized alveolar ridge defect refers to a volumetric deficit of the limited extent of bone and soft-tissue within the alveolar process. These ridge defects can be corrected by hard tissue and/or soft-tissue augmentation. A 30-year-old male patient was referred to the Department of Periodontology for correction of Seibert's Class III ridge defect in the lower anterior region. Granulation tissue/connective tissue present at the base of the defect was removed after elevation of full thickness flap. MucoMatrixX, an animal derived, collagen based soft-tissue graft was sutured to the labial flap and bone graft was placed into the defect. If a soft-tissue graft material could be used to replace the palatal grafts, then all the possible complications associated with donor site would be eliminated and above all periodontal plastic surgery and ridge augmentation would be better accepted by patients.
    Matched MeSH terms: Denture, Partial, Fixed
  15. Baig MR, Rajan G
    J Oral Implantol, 2010;36(1):31-5.
    PMID: 20218868 DOI: 10.1563/AAID-JOI-D-09-00062
    This article describes the dental implant-based rehabilitation of a partially edentulous patient with a unilateral maxillary dento-alveolar defect. A screw-retained prosthesis with a modified design was fabricated on zygomatic and regular dental implants. One section of the implant prosthesis has cemented crowns and the other section is conventional screw-retained. The design of the prosthesis overcame the hard and soft tissue deficit and provided the desired esthetics.
    Matched MeSH terms: Denture, Partial, Fixed*
  16. Ab-Murat N, Sheiham A, Watt R, Tsakos G
    BMC Oral Health, 2015 Mar 13;15:36.
    PMID: 25887142 DOI: 10.1186/s12903-015-0015-9
    The traditional measure for assessing dental treatment needs and workforce requirements based solely on normative need (NN) has major shortcomings. The sociodental approach (SDA) to assess needs overcomes some of the shortcomings as it combines normative and subjective needs assessments and also incorporates behavioural propensity (Sheiham and Tsakos 2007). The objective of this study was to estimate and compare prosthodontic treatment needs and workforce requirements, using the normative and the sociodental approaches for different skill mix models.
    Matched MeSH terms: Denture, Partial, Fixed/statistics & numerical data
  17. Baig MR, Gunaseelan R
    J Oral Implantol, 2012 Apr;38(2):149-53.
    PMID: 20932151 DOI: 10.1563/AAID-JOI-D-09-00089
    Passive fit of a long-span screw-retained implant prosthesis is an important criteria for the success of the restoration. This article describes a technique for fabricating a ceramometal implant fixed dental prosthesis (FDP) for a long-span partially edentulous situation by altering the conventional screw-retained design. The possibility of a passive fit is maximized by intraoral luting of the cast frame to milled abutments, and the potential framework distortion during fabrication is compensated to a major extent. Retrievability is ensured by screw retention of the prosthesis to the implants. Compared with conventional porcelain fused to metal screw-retained FDP, this prosthesis is relatively inexpensive to fabricate.
    Matched MeSH terms: Denture, Partial, Fixed*
  18. Baig MR, Rajan G
    Indian J Dent Res, 2010 Apr-Jun;21(2):311-3.
    PMID: 20657109 DOI: 10.4103/0970-9290.66635
    This article describes the immediate placement and loading of implants in the aesthetic zone using an implant-retained, fixed prosthesis with a modified design. One section of the implant prosthesis has cemented crowns and the other section is the conventional screw-retained. This combined approach significantly offsets the unsuitable implant position, alignment or angulation, while ensuring the easy retrievability, repair and maintenance of the prosthesis at the same time.
    Matched MeSH terms: Denture, Partial, Fixed
  19. Yunus N, Abdullah H, Hanapiah F
    J Prosthet Dent, 2001 Jun;85(6):540-3.
    PMID: 11404753
    This article describes the occlusal rehabilitation of a partially edentulous patient who did not want a removable partial denture. Implants and extensive fixed restorations were used to restore posterior support and treat severely worn dentition, respectively. The treatment offered the patient a functional and esthetic result.
    Matched MeSH terms: Denture, Partial, Fixed
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links