Displaying publications 1 - 20 of 160 in total

Abstract:
Sort:
  1. Understanding Stress-Strain Behavioral Change in Fabrics for Compression Bandaging
    Ruznan WS, Laing RM, Lowe BJ, Wilson CA, Jowett TJ
    Int J Low Extrem Wounds, 2021 Sep;20(3):244-250.
    PMID: 32248708 DOI: 10.1177/1534734620912093
    Bandages are common in many health-related treatments, including management of edema of the lower limb where they may remain in place for several days. The behavior of 2 bandage fabrics was investigated after exposure for up to 5 days to a multiaxial extension laboratory setup on a tensile tester in compression mode. The fabrics were extended 20% and remained under that machine setting. Stress-relaxation over time was determined by analyzing the rate of change over 24 hours and over 5 days. Most change, a rapid drop in force, occurred during the first 15 minutes; thereafter, for the next 12-hour period, a slower rate of decrease was observed. Both fabrics continued to relax gradually during the next 12 hours and continued to do so for up to 5 days. Little further change was evident during the last 12 hours or so. This phenomenon suggests that rewrapping may be appropriate (albeit not practical) after 12 hours of compression therapy to optimize the compression given to the lower leg. Relaxation behavior of these 2 fabrics can be explained using the generalized Maxwell-Wiechert model.
    Matched MeSH terms: Bandages*
  2. 2-(Nitromethylene)-1,3-dithietane
    Shanmuga Sundara Raj S, Surya Prakash Rao H, Sakthikumar L, Fun HK
    Acta Crystallogr C, 2000 Sep;56 (Pt 9):1113-4.
    PMID: 10986500
    In the crystal structure of the title compound, C(3)H(3)NO(2)S(2), the four-membered C(2)S(2) ring is planar, as is the whole molecule. The short intramolecular S.O distance of 2.687 (2) A shows the five-atom system to be conjugated. The molecules pack as a two-dimensional network in the (010) plane through short intermolecular S.O [2.900 (2) and 3.077 (2) A] interactions.
    Matched MeSH terms: Bandages
  3. 1-Acetyl-3-[1-(4-methoxyphenyl)-2-oxopropylidene]-1H-indol-2(3H)-one: a twinned crystal
    Usman A, Razak IA, Fun HK, Chantrapromma S, Zhang Y, Xu JH
    Acta Crystallogr C, 2002 Apr;58(Pt 4):O239-41.
    PMID: 11932554
    The crystal of the title compound, C(20)H(17)NO(4), which was used for collecting intensity data was twinned. Each of the two crystallographically independent molecules in the asymmetric unit has a planar indole moiety perpendicular to a planar oxopropyl moiety. The distribution of the bonds at the central C atom joining the oxopropyl, phenyl and indole substituents is also planar. The packing is stabilized by intermolecular C-H* * *O interactions, as well as by dipole-dipole and van der Waals interactions.
    Matched MeSH terms: Bandages
  4. Fulltext Crystal structure of [(2R,3R,4S)-3,4-bis(acet-yloxy)-5-iodo-3,4-di-hydro-2H-pyran-2-yl]methyl acetate
    Zukerman-Schpector J, Caracelli I, Stefani HA, Shamim A, Tiekink ER
    Acta Crystallogr E Crystallogr Commun, 2015 Jan 1;71(Pt 1):o53-4.
    PMID: 25705505 DOI: 10.1107/S205698901402564X
    In the title compound, C12H15IO7, the 3,4-di-hydro-2H-pyran ring is in a distorted half-boat conformation with the atom bearing the acet-yloxy group adjacent to the C atom bearing the methyl-acetate group lying 0.633 (6) Å above the plane of the remaining ring atoms (r.m.s. deviation = 0.0907 Å). In the crystal, mol-ecules are linked into a supra-molecular chain along the a axis through two C-H⋯O inter-actions to the same acceptor carbonyl O atom; these chains pack with no specific inter-molecular inter-actions between them.
    Matched MeSH terms: Bandages
  5. Fulltext Optimization of in-feed centreless cylindrical grinding process parameters using grey relational analysis
    Khan, Z.A., Siddiquee, A.N., Kamaruddin, S.
    Pertanika Journal of Science & Technology, 2012;20(2):257-268.
    MyJurnal
    This paper presents an effective approach for the optimization of an in-feed centreless cylindrical grindingof EN52 austenitic grade steel (DIN: X45CrSi93) with multiple performance characteristics based on thegrey relational analysis. To study the effect of the entire space of the input variables, nine experimentalruns, based on the Taguchi method of L9 orthogonal arrays, were performed to determine the best factorlevel condition. The response table and response graph for each level of the machining parameters wereobtained from the grey relational grade. In this study, the in-feed centreless cylindrical grinding processparameters, such as dressing feed, grinding feed, dwell time and cycle time, were optimized by takinginto consideration the multiple-performance characteristics like surface roughness and out of cylindricity.By analyzing the grey relational grade, it was observed that dressing feed, grinding feed and cycle timehad significant effect on the responses. The optimal multiple performance characteristics were achievedwith dressing feed at level 1 (5 mm/min), grinding feed at level 2 (6 mm/min), dwell time at level 2(2.5 s), and cycle time at level 2 (11 s). It is clearly shown that the above performance characteristics inthe in-feed Centreless cylindrical grinding process can be improved effectively through this approach.
    Matched MeSH terms: Bandages
  6. Use of bioelectric dressings for patients with hard-to-heal wounds: a case report
    Nair HK, Yan TD
    J Wound Care, 2023 Oct 01;32(Sup10a):S8-S14.
    PMID: 37830843 DOI: 10.12968/jowc.2023.32.Sup10a.S8
    There are many types of dressings available for the management of hard-to-heal (chronic) wounds. This case report illustrates the efficacy of bioelectric dressings in healing hard-to-heal wounds in five patients. Of the patients, four had diabetic foot ulcers (DFUs) and one had a surgical site infection. Wounds were examined using the TIMES concept and debridement was carried out if needed. Amorphous hydrogel was used as conduction fluid before the application of the bioelectric wound dressings. The wound was covered with foam dressing and crepe bandage. In this case report, among all five wounds, one wound healed completely while the other four reduced in size, with the presence of more granulation and re-epithelialisation. In this case report, bioelectric wound dressings were effective in managing infection and promoting wound healing.
    Matched MeSH terms: Bandages, Hydrocolloid*
  7. Fulltext Plant- vs. Bacterial-Derived Cellulose for Wound Healing: A Review
    Naomi R, Bt Hj Idrus R, Fauzi MB
    Int J Environ Res Public Health, 2020 Sep 18;17(18).
    PMID: 32961877 DOI: 10.3390/ijerph17186803
    Cellulose is a naturally existing element in the plant's cell wall and in several bacteria. The unique characteristics of bacterial cellulose (BC), such as non-toxicity, biodegradability, hydrophilicity, and biocompatibility, together with the modifiable form of nanocellulose, or the integration with nanoparticles, such as nanosilver (AgNP), all for antibacterial effects, contributes to the extensive usage of BC in wound healing applications. Due to this, BC has gained much demand and attention for therapeutical usage over time, especially in the pharmaceutical industry when compared to plant cellulose (PC). This paper reviews the progress of related research based on in vitro, in vivo, and clinical trials, including the overall information concerning BC and PC production and its mechanisms in wound healing. The physicochemical differences between BC and PC have been clearly summarized in a comparison table. Meanwhile, the latest Food and Drug Administration (FDA) approved BC products in the biomedical field are thoroughly discussed with their applications. The paper concludes on the need for further investigations of BC in the future, in an attempt to make BC an essential wound dressing that has the ability to be marketable in the global marketplace.
    Matched MeSH terms: Bandages*
  8. Fulltext A triclinic polymorph of tri-cyclo-hexyl-phosphane sulfide: crystal structure and Hirshfeld surface analysis
    Tan YJ, Yeo CI, Halcovitch NR, Jotani MM, Tiekink ERT
    Acta Crystallogr E Crystallogr Commun, 2017 Apr 01;73(Pt 4):493-499.
    PMID: 28435705 DOI: 10.1107/S205698901700353X
    The title compound, (C6H11)3PS (systematic name: tri-cyclo-hexyl-λ(5)-phosphane-thione), is a triclinic (P-1, Z' = 1) polymorph of the previously reported ortho-rhom-bic form (Pnma, Z' = 1/2) [Kerr et al. (1977 ▸). Can. J. Chem. 55, 3081-3085; Reibenspies et al. (1996 ▸). Z. Kristallogr. 211, 400]. While conformational differences exist between the non-symmetric mol-ecule in the triclinic polymorph, cf. the mirror-symmetric mol-ecule in the ortho-rhom-bic form, these differences are not chemically significant. The major feature of the mol-ecular packing in the triclinic polymorph is the formation of linear chains along the a axis sustained by methine-C-H⋯S(thione) inter-actions. The chains pack with no directional inter-actions between them. The analysis of the Hirshfeld surface for both polymorphs indicates a high degree of similarity, being dominated by H⋯H (ca 90%) and S⋯H/H⋯S contacts.
    Matched MeSH terms: Bandages
  9. Fulltext Crystal structure of 2-meth-oxy-2-[(4-methyl-phen-yl)sulfan-yl]-1-phenyl-ethan-1-one
    Zukerman-Schpector J, Olivato PR, Traesel HJ, Valença J, Rodrigues DN, Tiekink ER
    Acta Crystallogr E Crystallogr Commun, 2015 Jan 1;71(Pt 1):o3-4.
    PMID: 25705490 DOI: 10.1107/S205698901402550X
    In the title β-thio-carbonyl compound, C16H16O2S, the carbonyl and meth-oxy O atoms are approximately coplanar [O-C-C-O torsion angle = -18.2 (5)°] and syn to each other, and the tolyl ring is orientated to lie over them. The dihedral angle between the planes of the two rings is 44.03 (16)°. In the crystal, supra-molecular chains are formed along the c axis mediated by C-H⋯O inter-actions involving methine and methyl H atoms as donors, with the carbonyl O atom accepting both bonds; these pack with no specific inter-molecular inter-actions between them.
    Matched MeSH terms: Bandages
  10. Fulltext Honey Dressing in Managing Malignant Fungating Wound: A Case Report
    Edith, J., Anantha K. R., Karenita K. S., Surayah M., Filzah M. K., Farhana H., et al.
    Borneo Journal of Medical Sciences, 2018;12(101):77-78.
    MyJurnal
    Honey dressing has been used to treat wounds since thousand years ago, however, it has been vanished of it usage on wounds management. Lately, it resurfaces again and has been used widely by clinicians in managing hard-to-heal ulcers. With the extensive study and research been carried out by scientists, a better understanding on the usage in managing non-healing ulcers has been widely accepted nowadays.
    Matched MeSH terms: Bandages
  11. Venous leg ulcers managed using polyurethane foam with a micropore dressing: two case reports
    Nair HKR
    J Wound Care, 2018 Sep 01;27(Sup9a):S37-S40.
    PMID: 30207848 DOI: 10.12968/jowc.2018.27.Sup9a.S37
    BACKGROUND: Cases of venous leg ulcers (VLU) are expected to rise due to the rapidly ageing population in Malaysia. Central to the management of these wounds is compression therapy together with an appropriate wound dressing. Pain and discomfort during dressing changes are common in these patients. Polyurethane foam dressings with SMARTPORE technology (micropore dressing; Mundipharma) facilitate vertical absorption of exudate to reduce risks of wound and periwound area maceration. They support easy dressing removal with less pain and trauma to the wound bed. Thus, the micropore dressing was chosen as a viable treatment option in these cases.

    CASES: Case 1, a 74-year-old diabetic female was treated for bilateral VLUs with micropore dressing for several months, which she noted to be painless and convenient. Case 2, a 49-year-old housewife with a solitary VLU was treated with micropore dressing, leading to good treatment results and high satisfaction.

    CONCLUSION: VLUs managed by the micropore dressing resulted in reduced pain and ease of use during dressing changes, as well as noticeable reduction in wound and periwound area maceration. The use of this type of dressing in these cases shows encouraging results and provides a desirable management option. More robust clinical studies are necessary to establish this.

    Matched MeSH terms: Bandages, Hydrocolloid*; Compression Bandages*
  12. Fulltext Block Compressive Sensing (BCS) Based Low Complexity, Energy Efficient Visual Sensor Platform with Joint Multi-Phase Decoder (JMD)
    Ebrahim M, Chia WC, Adil SH, Raza K
    Sensors (Basel), 2019 May 19;19(10).
    PMID: 31109154 DOI: 10.3390/s19102309
    Devices in a visual sensor network (VSN) are mostly powered by batteries, and in such a network, energy consumption and bandwidth utilization are the most critical issues that need to be taken into consideration. The most suitable solution to such issues is to compress the captured visual data before transmission takes place. Compressive sensing (CS) has emerged as an efficient sampling mechanism for VSN. CS reduces the total amount of data to be processed such that it recreates the signal by using only fewer sampling values than that of the Nyquist rate. However, there are few open issues related to the reconstruction quality and practical implementation of CS. The current studies of CS are more concentrated on hypothetical characteristics with simulated results, rather than on the understanding the potential issues in the practical implementation of CS and its computational validation. In this paper, a low power, low cost, visual sensor platform is developed using an Arduino Due microcontroller board, XBee transmitter, and uCAM-II camera. Block compressive sensing (BCS) is implemented on the developed platform to validate the characteristics of compressive sensing in a real-world scenario. The reconstruction is performed by using the joint multi-phase decoding (JMD) framework. To the best of our knowledge, no such practical implementation using off the shelf components has yet been conducted for CS.
    Matched MeSH terms: Bandages
  13. Marine-derived polysaccharides and their therapeutic potential in wound healing application - A review
    Kumar M, Kumar D, Garg Y, Mahmood S, Chopra S, Bhatia A
    Int J Biol Macromol, 2023 Dec 31;253(Pt 6):127331.
    PMID: 37820901 DOI: 10.1016/j.ijbiomac.2023.127331
    Polysaccharides originating from marine sources have been studied as potential material for use in wound dressings because of their desirable characteristics of biocompatibility, biodegradability, and low toxicity. Marine-derived polysaccharides used as wound dressing, provide several benefits such as promoting wound healing by providing a moist environment that facilitates cell migration and proliferation. They can also act as a barrier against external contaminants and provide a protective layer to prevent further damage to the wound. Research studies have shown that marine-derived polysaccharides can be used to develop different types of wound dressings such as hydrogels, films, and fibres. These dressings can be personalised to meet specific requirements based on the type and severity of the wound. For instance, hydrogels can be used for deep wounds to provide a moist environment, while films can be used for superficial wounds to provide a protective barrier. Additionally, these polysaccharides can be modified to improve their properties, such as enhancing their mechanical strength or increasing their ability to release bioactive molecules that can promote wound healing. Overall, marine-derived polysaccharides show great promise for developing effective and safe wound dressings for various wound types.
    Matched MeSH terms: Bandages
  14. Effectiveness of collagen and gatifloxacin in improving the healing and antibacterial activities of gellan gum hydrogel films as dressing materials
    Bakar AJA, Azam NSM, Sevakumaran V, Ismail WIW, Razali MH, Razak SIA, et al.
    Int J Biol Macromol, 2023 Aug 01;245:125494.
    PMID: 37348586 DOI: 10.1016/j.ijbiomac.2023.125494
    The demand for advanced wound care products is rapidly increasing nowadays. In this study, gellan gum/collagen (GG/C) hydrogel films containing gatifloxacin (GAT) were developed to investigate their properties as wound dressing materials. ATR-FTIR, swelling, water content, water vapor transmission rate (WVTR), and thermal properties were investigated. The mechanical properties of the materials were tested in dry and wet conditions to understand the performance of the materials after exposure to wound exudate. Drug release by Franz diffusion was measured with all samples showing 100 % cumulative drug release after 40 min. Strong antibacterial activities against Staphylococcus aureus and Staphylococcus epidermis were observed for Gram-positive bacteria, while Escherichia coli and Pseudomonas aeruginosa were observed for Gram-negative bacteria. The in-vivo cytotoxicity of GG/C-GAT was assessed by wound contraction in rats, which was 95 % for GG/C-GAT01. Hematoxylin and eosin and Masson's trichrome staining revealed the appearance of fresh full epidermis and granulation tissue, indicating that all wounds had passed through the proliferation phase. The results demonstrate the promising properties of the materials to be used as dressing materials.
    Matched MeSH terms: Bandages/microbiology
  15. Recent progress in polysaccharide and polypeptide based modern moisture-retentive wound dressings
    Swetha Menon NP, Kamaraj M, Anish Sharmila M, Govarthanan M
    Int J Biol Macromol, 2024 Jan;256(Pt 2):128499.
    PMID: 38048932 DOI: 10.1016/j.ijbiomac.2023.128499
    Wounds were considered as defects in the tissues of the human skin and wound healing is said to be a tedious process as there are possibilities of infection or inflammation due to microorganisms. Modern moisture-retentive wound dressing (MMRWD) is opening a new window toward wound therapy. It comprises different types of wound dressing that has classified based on their functionality. Selective polysaccharide-polypeptide fiber composite materials such as hydrogels, hydrocolloids, hydro fibers, transparent-film dressing, and alginate dressing are discussed in this review as a type of MMRWD. The highlight of this polysaccharide and polypeptide based MMRWD is that it supports and enhances the healing of different types of wounds by moisture absorption thus preventing infection. This study has given enlightenment on the application of selected polysaccharide and polypeptide based MMRWD that enhances wound healing actions still it has been observed that the composite wound healing dressing is more effective than the single one. The nano-sized materials (synthetic nano drugs and phyto drugs) were found to increase the efficiency of healing action while coated in the wound dressing material. Future research is required to find out more possibilities of the different composite types of wound dressing in the healing action.
    Matched MeSH terms: Bandages*
  16. Metal-organic frameworks: synthesis, properties, wound dressing, challenges and scopes in advanced wound dressing
    Khan MUA, Aslam MA, Yasin T, Abdullah MFB, Stojanović GM, Siddiqui HM, et al.
    Biomed Mater, 2024 Jul 16;19(5).
    PMID: 38976990 DOI: 10.1088/1748-605X/ad6070
    Wound healing is a critical but complex biological process of skin tissue repair and regeneration resulting from various systems working together at the cellular and molecular levels. Quick wound healing and the problems associated with traditional wound repair techniques are being overcome with multifunctional materials. Over time, this research area has drawn significant attention. Metal-organic frameworks (MOFs), owning to their peculiar physicochemical characteristics, are now considered a promising class of well-suited porous materials for wound healing in addition to their other biological applications. This detailed literature review provides an overview of the latest developments in MOFs for wound healing applications. We have discussed the synthesis, essential biomedical properties, wound-healing mechanism, MOF-based dressing materials, and their wound-healing applications. The possible major challenges and limitations of MOFs have been discussed, along with conclusions and future perspectives. This overview of the literature review addresses MOFs-based wound healing from several angles and covers the most current developments in the subject. The readers may discover how the MOFs advanced this discipline by producing more inventive, useful, and successful dressings. It influences the development of future generations of biomaterials for the healing and regeneration of skin wounds.
    Matched MeSH terms: Bandages*
  17. Collagen-Based Nanoparticles as Drug Delivery System in Wound Healing Applications
    Kusnadi K, Herdiana Y, Rochima E, Putra ON, Mohd Gazzali A, Muchtaridi M
    Int J Nanomedicine, 2024;19:11321-11341.
    PMID: 39524919 DOI: 10.2147/IJN.S485588
    BACKGROUND: Conventional wound dressings often adhere to wounds and can cause secondary injury due to their lack of anti-inflammatory and antibacterial properties. In contrast, collagen-based nanoparticles (NPs) as drug delivery systems exhibit both biocompatibility and biodegradability, presenting a promising avenue for accelerating wound healing processes.

    AIMS OF STUDY: This review aims to provide a comprehensive overview of the mechanisms involved in wound healing, description of the attributes of ideal wound dressings, understanding of wound healing efficacy of collagen, exploring NPs-mediated drug delivery mechanisms in wound therapy, detailing the synthesis and fabrication techniques of collagen-based NPs, and delineating the applications of various collagen-based NPs infused wound dressings on wound healing.

    METHODOLOGY: This review synthesizes relevant literature from reputable databases such as Scopus, Science Direct, Google Scholar, and PubMed.

    RESULTS: A diverse array of collagen-based NPs, including nanopolymers, metal NPs, nanoemulsions, nanoliposomes, and nanofibers, demonstrate pronounced efficacy in promoting wound closure and tissue regeneration. The incorporation of collagen-based NPs has not only become an agent for the delivery of therapeutics but also actively contributes to the wound healing cascade.

    CONCLUSION: In conclusion, In brief, the use of collagen-based NPs presents a compelling strategy for expediting wound healing processes.

    Matched MeSH terms: Bandages*
  18. Fulltext Characterization of capacitive electromyography biomedical sensor insulated with porous medical bandages
    Ng CL, Reaz MBI, Crespo ML, Cicuttin A, Chowdhury MEH
    Sci Rep, 2020 09 10;10(1):14891.
    PMID: 32913303 DOI: 10.1038/s41598-020-71709-0
    A capacitive electromyography (cEMG) biomedical sensor measures the EMG signal from human body through capacitive coupling methodology. It has the flexibility to be insulated by different types of materials. Each type of insulator will yield a unique skin-electrode capacitance which determine the performance of a cEMG biomedical sensor. Most of the insulator being explored are solid and non-breathable which cause perspiration in a long-term EMG measurement process. This research aims to explore the porous medical bandages such as micropore, gauze, and crepe bandage to be used as an insulator of a cEMG biomedical sensor. These materials are breathable and hypoallergenic. Their unique properties and characteristics have been reviewed respectively. A 50 Hz digital notch filter was developed and implemented in the EMG measurement system design to further enhance the performance of these porous medical bandage insulated cEMG biomedical sensors. A series of experimental verifications such as noise floor characterization, EMG signals measurement, and performance correlation were done on all these sensors. The micropore insulated cEMG biomedical sensor yielded the lowest noise floor amplitude of 2.44 mV and achieved the highest correlation coefficient result in comparison with the EMG signals captured by the conventional wet contact electrode.
    Matched MeSH terms: Bandages*
  19. Fulltext Penyata peperiksaan komprehensif (ComprESs):ke arah pengurusan peperiksaan yang efisien
    Jamal Othman, Wan Nur Shaziayani Wan Mohd Rosly, Norshuhada Samsudin, Sharifah Sarimah Syed Abdullah, Noor Azizah Mazeni, Muniroh Hamat, et al.
    Jurnal Inovasi Malaysia, 2020;3(2):12-25.
    MyJurnal
    Penyata Peperiksaan merupakan dokumen rasmi yang membolehkanpelajar menduduki peperiksaan. Maklumat slip peperiksaan yang tidak lengkap boleh menyebabkanpelajar lewat ketempatpeperiksaan atau lebih teruk lagi tidak hadir peperiksaankerana tersalah menyemak jadualdan tempatpeperiksaan. Bagi mengatasi masalah ini, metodologi SDLC (System Development Life Cycle) untuk pembangunan sistem berasaskan webtelah dijalankan.Slip Peperiksaan Komprehensif atau singkatannya ComprESS membolehkan pelajar menjana dan mencetak slip peperiksaan baharu yang mengandungi maklumat lengkapseperti tarikh,masa,tempatdan nombor meja. Pengguna sistem telah memberikan maklumbalas positif melalui pengujian sistem sertamaklumbalas dariatas talian. Melalui temubual dengan pelajar dan staf, mereka sangat yakinbahawa ComprESS telahmenyelesaikan isu maklumat peperiksaan yang tidak lengkap pada penyata peperiksaan dan seterusnya pengurusan peperiksaanlebih efisien.
    Matched MeSH terms: Bandages
  20. Delivery of Therapeutics from Layer-by-Layer Electrospun Nanofiber Matrix for Wound Healing: An Update
    Jeckson TA, Neo YP, Sisinthy SP, Gorain B
    J Pharm Sci, 2021 02;110(2):635-653.
    PMID: 33039441 DOI: 10.1016/j.xphs.2020.10.003
    Increasing incidences of chronic wounds urge the development of effective therapeutic wound treatment. As the conventional wound dressings are found not to comply with all the requirements of an ideal wound dressing, the development of alternative and effective dressings is demanded. Over the past few years, electrospun nanofiber has been recognized as a better system for wound dressing and hence has been studied extensively. Most of the electrospun nanofiber dressings were fabricated as single-layer structure mats. However, this design is less favorable for the effective healing of wounds mainly due to its burst release effect. To address this problem and to simulate the organized skin layer's structure and function, a multilayer structure of wound dressing had been proposed. This design enables a sustained release of the therapeutic agent(s), and more resembles the natural skin extracellular matrix. Multilayer structure is also referred to layer-by-layer (LbL), which has been established as an innovative method of drug incorporation and delivery, combines a high surface area of electrospun nanofibers with the multilayer structure mat. This review focuses on LbL multilayer electrospun nanofiber as a superior strategy in designing an optimal wound dressing.
    Matched MeSH terms: Bandages
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links