MyMedR

Displaying publications 1 - 20 of 30 in total

Abstract:

Sort:

Fulltext Increased Retention Of A Partial Denture Maxillary Obturator Using Dental Implant

Yunus, N., Rahman, Z.A.A.

Ann Dent, 2000;7(1):-.
MyJurnal

Tissue-integrated oral implants have opened-up a new perspective in oral rehabilitation of tumour patients who had undergone surgery. The present case demonstrated a simple approach to rehabilitate a patient who had subtotal maxillectomy using dental implant. The use of an implant in combination with a natural abutment tooth was shown to improve the retention and stability of the obturator. Magnetic attachment and telescopic restoration were the retainers of choice and they provided good aesthetic result.
Fulltext A new presentation of combination syndrome

Ahmad, F., Yunus, N., Mc Cord, F.

Ann Dent, 2008;15(2):94-99.
MyJurnal

This article reviews the concept of Combination Syndrome and presents a clinical case of a patient with a modern variation to this clinical scenario': The clinical procedures involved in the provision of a maxillary complete denture against a mandibular implant-supported complete fixed prosthesis is described with some suggestions on how to optimise the treatment outcome for the patient.
Fulltext The Radiopacity Of Dental Prostheses (Fixed And Removable) On Plain Radiographs - An Experimental Study

Kasim, N.H.A., Abdullah, B.J.J., Mahadevan, J., Yunus, N.

Ann Dent, 1998;5(1):-.
MyJurnal

The impaction of dental prostheses in either the airway or esophagus is an under-recognized problem which may result in severe morbidity or even mortality. The radio-opacity and the size of fixed and removable dental prostheses in an animal carcass was investigated. Prostheses were placed one at a time in the oro-laryngopharynx or in tho trachea and the esophagus. Lateral radiographs were taken for each prosthesis in site. The radio-opacity and size of the prostheses on the radiograph was graded. Most of the prostheses investigated were radio-opaque though the removable prostheses were more likely to be radiolucent and differ in size. In a symptomatic patient with a missing dental prosthesis, a negative chest or abdominal radiograph does not exclude impaction, inhalation or ingestion. Further evaluation with endoscopy or even computed tomography may be essential to reduce the possibility of severe morbidity or even mortality.
The use of implants in the occlusal rehabilitation of a partially edentulous patient: a clinical report

Yunus N, Abdullah H, Hanapiah F

J Prosthet Dent, 2001 Jun;85(6):540-3.
PMID: 11404753

This article describes the occlusal rehabilitation of a partially edentulous patient who did not want a removable partial denture. Implants and extensive fixed restorations were used to restore posterior support and treat severely worn dentition, respectively. The treatment offered the patient a functional and esthetic result.
Fulltext Non-adherence to recommended Pap smear screening guidelines and its associated factors among women attending health clinic in Malaysia

Yunus NA, Mohamed Yusoff H, Draman N

Malays Fam Physician, 2018;13(1):10-17.
PMID: 29796205 MyJurnal

Introduction: Cervical cancer ranks as the second most frequent cancer among women in Malaysia. Although a cervical screening program has been introduced since 1960s and is provided free of charge in all government health facilities, the coverage and adherence rate to recommendation among Malaysian women remains low.

Objectives: To determine the proportion of non-adherence to Pap smear screening guidelines and its associated factors among women attending a health clinic in Malaysia.

Method: A cross sectional study involving 316 women aged 20 to 65 years who had undergone a Pap smear. Universal sampling method was applied to select participants among women who attended the selected health clinic from January 2013 to May 2013. A self-administered questionnaire was used to obtain the socio-demographic characteristics, socio-health data and perceptions about cervical cancer and Pap smear screening. The data was analysed using descriptive statistics and multiple logistic regression.

Result: The proportion of non-adherence to Pap smear screening was 90.5%. Age, marital status, duration of marriage, education level, employment, household income and number of children were not significantly associated with non-adherence. Perceived severity, perceived susceptibility, perceived benefit, perceived barrier and cues to action did not show significant association with non-adherence to Pap smear screening.

Conclusion: Non-adherence to Pap smear screening was high among Malaysian women. Measures should be taken to increase Pap smear screening coverage in our country. Other factors beyond Health Belief Model that influence Pap smear screening practice among Malaysian women should be explored.
Closed hollow bulb obturator--one-step fabrication: a clinical report

Buzayan MM, Ariffin YT, Yunus N

J Prosthodont, 2013 Oct;22(7):591-5.
PMID: 23551843 DOI: 10.1111/jopr.12036

A method is described for the fabrication of a closed hollow bulb obturator prosthesis using a hard thermoforming splint material and heat-cured acrylic resin. The technique allowed the thickness of the thermoformed bulb to be optimized for weight reduction, while the autopolymerized seal area was covered in heat-cured acrylic resin, thus eliminating potential leakage and discoloration. This technique permits the obturator prosthesis to be processed to completion from the wax trial denture without additional laboratory investing, flasking, and processing.
Fulltext The effect of bur preparation on the surface roughness and reline bond strength of urethane dimethacrylate denture base resin

Baig MR, Ariff FT, Yunus N

Indian J Dent Res, 2011 Mar-Apr;22(2):210-2.
PMID: 21891887 DOI: 10.4103/0970-9290.84288

BACKGROUND: The clinical success of relining depends on the ability of reline resin to bond to denture base. Surface preparations may influence reline bond strength of urethane-based dimethacrylate denture base resin.
AIM: To investigate the effect of bur preparation on the surface roughness (R a ) of eclipse denture base resin and its shear bond strength (SBS) to an intra-oral self-curing reline material. The mode of reline bonding failure was also examined.
MATERIALS AND METHODS: Twenty-four cylindrical Eclipse™ specimens were prepared and separated into three groups of eight specimens each. Two groups were subjected to mechanical preparation using standard and fine tungsten carbide (TC) burs and the third group (control) was left unprepared. The R a of all specimens was measured using a contact stylus profilometer. Subsequently, relining was done on the prepared surface and SBS testing was carried out a day later using a universal testing machine.
RESULTS: One-way ANOVA revealed significant differences (P<0.05) in R a and SBS values for all the groups. Post-hoc Tukey's HSD test showed significant differences (P<0.05) between all the groups in the R a values. For SBS also there were significant differences (P<0.05), except between standard bur and control.
CONCLUSIONS: 1) There was a statistically significant difference in the R a of Eclipse™ specimens prepared using different carbide burs (P<0.05). 2) There was a statistically significant difference in the relined SBS (P<0.05) when prepared using different burs, but the difference between the standard bur and the control group was not statistically significant.
Zygomatic implant-retained fixed complete denture for an elderly patient

Baig MR, Rajan G, Yunus N

Gerodontology, 2012 Jun;29(2):e1140-5.
PMID: 21615782 DOI: 10.1111/j.1741-2358.2010.00433.x

Dental rehabilitation of a completely edentulous geriatric patient has always been a challenge to the clinician, especially in treating those with higher expectations and demands. Treatment duration and the amount of residual alveolar bone available are often important considerations when planning for dental implant-based fixed treatment for these patients. With the introduction of zygomatic implants, a graftless alternative solution has emerged for deficient maxillary bone with provision for immediate loading. This article describes the treatment of a completely edentulous elderly patient using zygomatic implants in conjunction with conventional implants. The implants were immediately loaded using a definitive acrylic resin fixed denture reinforced with a cast metal framework, to provide function and aesthetics.
Shear bond strength of two chemically different denture base polymers to reline materials

Ahmad F, Dent M, Yunus N

J Prosthodont, 2009 Oct;18(7):596-602.
PMID: 19515166 DOI: 10.1111/j.1532-849X.2009.00481.x

This study evaluated the shear bond strengths of light-polymerized urethane dimethacrylate (Eclipse) and heat-polymerized polymethylmethacrylate (Meliodent) denture base polymers to intraoral and laboratory-processed reline materials.
Hardness, flexural strength, and flexural modulus comparisons of three differently cured denture base systems

Ali IL, Yunus N, Abu-Hassan MI

J Prosthodont, 2008 Oct;17(7):545-9.
PMID: 18761582 DOI: 10.1111/j.1532-849X.2008.00357.x

This study compared the surface hardness, flexural strength, and flexural modulus of a light- and heat-cured urethane dimethacrylate (UDMA) to two conventional polymethyl methacrylate (PMMA) denture base resins. The effect of less-than-optimal processing condition on the hardness of internal and external surfaces of UDMA specimens was also investigated.
Fulltext Outcomes of placing short implants in the posterior mandible: a preliminary randomized controlled trial

Al-Hashedi AA, Taiyeb-Ali TB, Yunus N

Aust Dent J, 2016 06;61(2):208-18.
PMID: 25966305 DOI: 10.1111/adj.12337

BACKGROUND: Short dental implants can be an alternative to bone augmentation procedures at sites of reduced alveolar bone. Most studies on short implants are retrospective or multicentre reports that lack controlled and consistent comparison between different systems. This study aimed to compare clinical and radiographic outcomes of short implants in two different systems in the posterior mandible.
METHODS: Twenty patients with two adjacent missing posterior teeth were recruited. Patients were assigned equally and randomly into two groups; Bicon(®) (6 or 8 mm) and Ankylos(®) (8 mm) implants. A two-stage surgical approach and single crowns were used for implant placement and loading. Outcomes included peri-implant clinical parameters, implant stability (Periotest values; PTVs) and peri-implant bone changes, which were assessed at baseline, 2, 6 and 12 months post-loading.
RESULTS: No implant loss was encountered up to 12 months post-loading. No significant difference in the clinical or radiographic parameters was observed except for PTVs (p < 0.05) that was lower in Ankylos(®) implants.
CONCLUSIONS: The use of short dental implants was associated with excellent 12 months clinical and radiographic outcomes. Ankylos(®) and Bicon(®) implants demonstrated similar peri-implant soft tissue and alveolar bone changes. However, Ankylos(®) implants demonstrated better implant stability at all evaluation intervals.
Some mechanical properties of a highly cross-linked, microwave-polymerized, injection-molded denture base polymer

Memon MS, Yunus N, Razak AA

Int J Prosthodont, 2001 May-Jun;14(3):214-8.
PMID: 11484567

PURPOSE: The impact strength and the flexural properties of denture base materials are of importance in predicting their clinical performance upon sudden loading. This study compares the impact and transverse strengths and the flexural modulus of three denture base polymers.
MATERIALS AND METHODS: The investigation included a relatively new microwave-polymerized polyurethane-based denture material processed by an injection-molding technique, a conventional microwave-polymerized denture material, and a heat-polymerized compression-molded poly(methyl methacrylate) (PMMA) denture material. Impact strength was determined using a Charpy-type impact tester. The transverse strength and the flexural modulus were assessed with a three-point bending test. The results were subjected to statistical analysis using a one-way analysis of variance and the Scheffé test for comparison.
RESULTS: The impact strength of the microwave-polymerized injection-molded polymer was 6.3 kl/m2, while its flexural strength was 66.2 MPa. These values were lower than those shown by the two compression-molded PMMA-based polymers. The differences were statistically significant. The flexural modulus of the new denture material was 2,832 MPa, which was higher than the conventional heat-polymerized polymer but was comparable to the other microwave-polymerized PMMA-based polymer. The difference in the flexural modulus was statistically significant.
CONCLUSION: In terms of the impact and flexural strengths, the new microwave-polymerized, injection-molded, polyurethane-based polymer offered no advantage over the existing heat- and microwave-polymerized PMMA-based denture base polymers. However, it has a rigidity comparable to that of the microwave-polymerized PMMA polymer.
Finite element analysis and clinical complications in mandibular implant-overdentures opposing maxillary dentures

Khuder T, Yunus N, Sulaiman E, Dabbagh A

J Mech Behav Biomed Mater, 2017 11;75:97-104.
PMID: 28709037 DOI: 10.1016/j.jmbbm.2017.06.039

Denture fracture is a common clinical complication caused by improper material selection, design, or fabrication technique. This study aimed to investigate the effect of two attachment systems on fracture risk of the implant-overdentures (IOD) via finite element analysis (FEA), using the force distributions obtained from patients' occlusal analyses and to compare the obtained results with the clinical complications associated with these attachments. A three-dimensional jaw model comprised of the edentulous bones was constructed. Three types of mandibular prostheses including complete denture (CD) (model LCD), IOD with Locator attachment (model LID-L), and IOD with telescopic attachment (model LID-T), as well as a maxillary CD (model UCD) were assembled. The vertical occlusal forces at anterior and posterior quadrants were obtained from the patients wearing mandibular CDs or IODs. The FEA results were further compared with the mechanical failures of different prostheses observed at patient recalls. In overall, the fracture risk of mandibular prostheses was lower than the maxillary compartments. The UCD opposing LCD underwent higher strains than that opposing LID-L and LID-T, which was mostly concentrated at the anterior mid-palatal polished surface. On the other hand, LID-L showed the lowest strain, followed by LID-T, and LCD. The obtained results were consistent with the clinical complications observed in the patient recalls.
Association between occlusal force distribution in implant overdenture prostheses and residual ridge resorption

Khuder T, Yunus N, Sulaiman E, Ibrahim N, Khalid T, Masood M

J Oral Rehabil, 2017 May;44(5):398-404.
PMID: 28295492 DOI: 10.1111/joor.12504

This study aimed to investigate residual ridge resorption (RRR) of anterior and posterior maxillary and mandibular edentulous ridges, in patients treated with mandibular implant overdentures (IOD) and compare with conventional complete denture (CD) wearers, and to determine at each location, the association of RRR with the occlusal forces distribution and other patients' variables. The anterior and posterior RRR of IOD (six males, 17 females) and CD (12 males, 11 females) groups were determined using baseline and follow-up dental panaromic radiographs (DPT) (mean intervals 4 ± 1·8 years). The bone ratios were calculated using proportional area: anatomic to fixed reference areas and mean difference of ratios between the intervals determined RRR. The ridge locations included anterior and posterior maxillary and posterior mandibular arches. The T-Scan III digital occlusal system was used to record anterior and posterior percentage occlusal force (%OF) distributions. There were significant differences in anterior and posterior %OF between treatment groups. Two-way anova showed RRR was significant for arch locations (P = 0·005), treatment group (IOD versus CD) (P = 0·001), however, no significant interaction (P = 0·799). Multivariate regression analyses showed significant association between RRR and %OF at anterior maxilla (P = 0·000) and posterior mandible (P = 0·023) and for treatment groups at posterior maxilla (P = 0·033) and mandibular areas (P = 0·021). Resorption was observed in IOD compared to CD groups, with 8·5% chance of less resorption in former and 7·8% in the latter location. Depending on arch location, ridge resorption at various locations was associated with occlusal force distribution and/or treatment groups (implant prostheses or conventional complete dentures).
Fulltext Effectiveness of canlite and probase stabilized laterite soil

Mohd Yunus, N. Z., Wei, N. T., Yung, Y. C., Marto, A., Pakir, F., Hezmi, M. A., et al.

Journal of Advanced Research Design, 2015;5(1):17-30.
MyJurnal

Besides traditional chemical stabilizers, polymer emulsion that is considered as a nontraditional
chemical stabilizer had been introduced recently. Among polymer emulsions, Canlite and
Probase have been widely used for soil stabilization. The aim of this paper is to investigate the
effectiveness of Laterite soil stabilization treated by Canlite-liquid and Probase-liquid soil stabilizers.
A testing program, scheduled to achieve the overall objectives of this study was conducted to
determine the basic properties of Laterite soil, establish the relationship between the compaction
characteristics (maximum dry density and optimum moisture content) with the amount of polymer
emulsion and last but not least to compare the strength of the Canlite-treated and Probase-treated
Laterite soil. The effects of both polymer soil stabilizers – Canlite and Probase – were examined. The
optimum moisture content of the mixtures was used as a reference to determine the water content for
the preparation of all the specimens and later used in the unconfined compressive strength (UCS) test.
The laboratory test results showed that the additional amount of Canlite and Probase have improved
the physical properties, liquid limit and unconfined compressive strength (UCS) of the Laterite soil.
The compressive strength of the treated Laterite was found varied and depends on the type of
stabilizers, quantity of additives and curing time. From the UCS tests, it was found that Probase
improves the strength of the Laterite more than Canlite.
Accuracy of a new elastomeric impression material for complete-arch dental implant impressions

Baig MR, Buzayan MM, Yunus N

J Investig Clin Dent, 2018 May;9(2):e12320.
PMID: 29349910 DOI: 10.1111/jicd.12320

AIM: The aim of the present study was to assess the accuracy of multi-unit dental implant casts obtained from two elastomeric impression materials, vinyl polyether silicone (VPES) and polyether (PE), and to test the effect of splinting of impression copings on the accuracy of implant casts.
METHODS: Forty direct impressions of a mandibular reference model fitted with six dental implants and multibase abutments were made using VPES and PE, and implant casts were poured (N = 20). The VPES and PE groups were split into four subgroups of five each, based on splinting type: (a) no splinting; (b) bite registration polyether; (c) bite registration addition silicone; and (d) autopolymerizing acrylic resin. The accuracy of implant-abutment replica positions was calculated on the experimental casts, in terms of interimplant distances in the x, y, and z-axes, using a coordinate measuring machine; values were compared with those measured on the reference model. Data were analyzed using non-parametrical Kruskal-Wallis and Mann-Whitney tests at α = .05.
RESULTS: The differences between the two impression materials, VPES and PE, regardless of splinting type, were not statistically significant (P>.05). Non-splinting and splinting groups were also not significantly different for both PE and VPES (P>.05).
CONCLUSIONS: The accuracy of VPES impression material seemed comparable with PE for multi-implant abutment-level impressions. Splinting had no effect on the accuracy of implant impressions.
Ocular Defect Rehabilitation Using Photography and Digital Imaging: A Clinical Report

Buzayan MM, Ariffin YT, Yunus N, Mahmood WA

J Prosthodont, 2015 Aug;24(6):506-10.
PMID: 25315047 DOI: 10.1111/jopr.12235

Ocular disorders occasionally necessitate surgical intervention that may lead to eye defects. The primary objective in restoring and rehabilitating such defects with an ocular prosthesis is to enable patients to cope better with associated psychological stress and to return to their accustomed lifestyle. A series of detailed steps for custom-made ocular prosthesis fabrication using the advantages of digital photography to replace the conventional oil paint and monopoly iris painting technique are presented in this article. In the present case, a digital photograph of the patient's iris was captured using a digital camera and manipulated on a computer using graphic software to produce a replica of the natural iris. The described technique reduces treatment time, increases simplicity, and permits the patient's natural iris to be replicated without the need for iris painting and special artistic skills.
Some flexural properties of a nylon denture base polymer

Yunus N, Rashid AA, Azmi LL, Abu-Hassan MI

J Oral Rehabil, 2005 Jan;32(1):65-71.
PMID: 15634304

Nylon denture base material could be a useful alternative to poly (methyl methacrylate) (PMMA) in special circumstances such as patient allergy to the monomer. The aim of this study was to evaluate the flexural properties of a nylon denture base material (Lucitone FRS), a conventional compression-moulded heat-polymerized (Meliodent), a compression-moulded microwave-polymerized (Acron MC) and an injection-moulded microwave-polymerized (Lucitone 199) PMMA polymers. The effect of aldehyde-free, oxygen releasing disinfectant solution (Perform) on these properties was also investigated. The flexural modulus and the flexural strength were assessed with a three-point bending test. Specimens were stored in water at a temperature of 37 degrees C for 30 days. For each material, half of the prepared specimens were randomly selected and immersed in the disinfectant 24 h prior to testing. Results were compared statistically at a confidence level of 95%. The result showed that in both the control and disinfected groups, the flexural modulus of nylon was significantly lower than the three PMMA polymers. The flexural strength of nylon was significantly lower than those of Meliodent and Acron MC but was comparable with Lucitone 199. A 24-h immersion in the disinfecting solution increased the rigidity of nylon denture base material.
Patient-reported outcome and its association with attachment type and bone volume in mandibular implant overdenture

Khalid T, Yunus N, Ibrahim N, Elkezza A, Masood M

Clin Oral Implants Res, 2017 May;28(5):535-542.
PMID: 26989853 DOI: 10.1111/clr.12831

OBJECTIVE: To determine oral health-related quality of life (OHRQoL) and denture satisfaction (DS) in patients provided with mandibular implant-supported overdentures (ISOD) retained by two different attachment types, and the association of mandibular bone volume with the change in patient-reported outcome, before and after implant treatment.
MATERIAL AND METHODS: Thirty-four patients (mean age 60.70  ±  8.7 years) received telescopic crown or locator attachments for ISOD and completed OHIP-14 (Malaysian version) and DS questionnaires, at baseline (T0 ) with new conventional complete dentures (CCD) and 3 months (T1 ) and 3 years (T2 ) after ISOD conversion. Mandibular bone volume was calculated from cone beam computed tomography (CBCT) datasets using Mimics software. Mean changes (MC) in OHIP-14 and DS at intervals were analyzed using the Wilcoxon signed-rank test and effect size (ES). The association of bone volume, implant attachment type, and other patient variables with the change in OHIP-14 and DS were determined using multivariate linear regression analysis.
RESULTS: The MC in OHIP-14 and DS scores from T0 to T1 and T2 showed significant improvement with moderate and large ES, respectively. Regression analyses for the change in OHIP-14 score from T0 to T2 showed significant association with implant attachment type (P = 0.043), bone volume (P = 0.004), and baseline OHIP-14 (P = 0.001), while for DS, the association was only significant with baseline DS score (P = 0.001).
CONCLUSION: Improvement in patients' OHRQoL and satisfaction with ISOD was associated with their baseline ratings. Mandibular bone volume had a stronger association for improvement in OHRQoL compared to type of attachment.
Clinical implications of conventional cytogenetics, fluorescence in situ hybridization (FISH) and molecular testing in chronic myeloid leukaemia patients in the tyrosine kinase inhibitor era - A review

Ankathil R, Ismail SM, Mohd Yunus N, Sulong S, Husin A, Abdullah AD, et al.

Malays J Pathol, 2020 Dec;42(3):307-321.
PMID: 33361712

Chronic myeloid leukaemia (CML) provides an illustrative disease model for both molecular pathogenesis of cancer and rational drug therapy. Imatinib mesylate (IM), a BCR-ABL1 targeted tyrosine kinase inhibitor (TKI) drug, is the first line gold standard drug for CML treatment. Conventional cytogenetic analysis (CCA) can identify the standard and variant Philadelphia (Ph) chromosome, and any additional complex chromosome abnormalities at diagnosis as well as during treatment course. Fluorescence in situ hybridization (FISH) is especially important for cells of CML patients with inadequate or inferior quality metaphases or those with variant Ph translocations. CCA in conjunction with FISH can serve as powerful tools in all phases of CML including the diagnosis, prognosis, risk stratification and monitoring of cytogenetic responses to treatment. Molecular techniques such as reverse transcriptase-polymerase chain reaction (RT-PCR) is used for the detection of BCR-ABL1 transcripts at diagnosis whereas quantitative reverse transcriptase-polymerase chain reaction (qRTPCR) is used at the time of diagnosis as well as during TKI therapy for the quantitation of BCR-ABL1 transcripts to evaluate the molecular response and minimal residual disease (MRD). Despite the excellent treatment results obtained after the introduction of TKI drugs, especially Imatinib mesylate (IM), resistance to TKIs develops in approximately 35% - 40% of CML patients on TKI therapy. Since point mutations in BCR-ABL1 are a common cause of IM resistance, mutation analysis is important in IM resistant patients. Mutations are reliably detected by nested PCR amplification of the translocated ABL1 kinase domain followed by direct sequencing of the entire amplified kinase domain. The objective of this review is to highlight the importance of regular and timely CCA, FISH analysis and molecular testing in the diagnosis, prognosis, assessment of therapeutic efficacy, evaluation of MRD and in the detection of BCR-ABL1 kinase mutations which cause therapeutic resistance in adult CML patients.

Filters

Please provide feedback to Administrator ([email protected])

External Links