We report the growth of few-layer graphene (FLG) on a nickel (Ni) substrate using palm oil as a single carbon source by thermal chemical vapor deposition (T-cvD). Using an ample amount of vaporized palm oil resulted in the formation of a thick, amorphous carbon film on the Ni surface. By decreasing the amount of the carbon source supply, thin films consisting of graphite grains and FLG were obtained at growth temperatures of 900 and 1000°C, confirming the potential of using palm oil as a source for graphene growth. The occasional voids were obtained on the transferred film and these voids were confirmed to be areas where FLGs are formed. These FIEs are likely removed during the transfer process. Further reducing the amount of palm oil suppressed the coverage of graphite grains and increased the void area formation on the transferred films, proving the increase of FLG coverage.
A graphene-based three-branch nanojunction (TBJ) device having nanowire width of 200 nm was successfully fabricated. The layer number of graphene prepared by mechanical exfoliation was determined using a simple optical contrast method which showed good agreement with theoretical value. n-type doping by Polyethylene imines (PEI) was done to control the position of Dirac point. Baking and PEI doping was found to decrease contact resistance and increase the carrier mobility. The chemically-doped TBJ graphene showed carrier mobility of 20000 cm2/Vs, which gave related mean free path of 175 nm.
Gallium nitride with wurtzite crystal structure is a chemically stable semiconductor with high internal spontaneous and piezoelectric polarization, which make it highly suitable materials to create very sensitive and robust sensors for the detection of ions, gases and liquids. Sensing characteristics of an open-gate liquid-phase sensor fabricated on undoped-AlGaN/GaN high-electron-mobility-transistor (HEMT) structure in aqueous solution was investigated. In ambient atmosphere, the open-gate undoped AlGaN/GaN HEMT clearly showed only the presence of linear region of currents while Si-doped AlGaN/GaN showed the linear and saturation regions of currents, very similar to those of gated devices. This seems to show that very low Fermi level pinning by surface states exists in undoped AlGaN/GaN sample. In aqueous solution, the typical current-voltage (I-V) characteristics of HEMTs with good gate controllability were observed. The potential of the AlGaN surface at the open-gate area is effectively controlled via aqueous solution by Ag/AgCl reference gate electrode. The open-gate undoped AlGaN/GaN HEMT structure is capable of stable operation in aqueous electrolytes and exhibit linear sensitivity, and high sensitivity of 1.9 mA/pH or 3.88 mA/mm/pH at drain-source voltage, VDS = 5 V was obtained. Due to large leakage current where it increases with the negative reference gate voltage, the Nernstian’s like sensitivity cannot be determined. Suppression of current leakage is likely to improve the device performance. The open-gate undoped-AlGaN/GaN structure is expected to be suitable for pH sensing application.