In this research, the capability of lateritic soil used as coagulant for the treatment of stabilized leachate from the Penang-Malaysia Landfill Site was investigated. The evaluation of lateritic soil coagulant in comparison with commercialized chemical coagulants, such as alum, was performed using conventional jar test experiments. The optimum pH and coagulant dosage were identified for the lateritic soil coagulant and the comparative alum coagulant. It was found that the application of lateritic soil coagulant was quite efficient in the removal of COD, color and ammoniacal-nitrogen content from the landfill leachate. The optimal pH value was 2.0, while 14 g/L of lateritic soil coagulant was sufficient in removing 65.7% COD, 81.8% color and 41.2% ammoniacal-nitrogen. Conversely, the optimal pH and coagulant dosage for the alum were pH 4.8 and 10 g/L respectively, where 85.4% COD, 96.4% color and 47.6% ammoniacal-nitrogen were removed from the same leachate sample. Additionally, the Sludge Volume Index (SVI) ratio of alum and lateritic soil coagulant was 53:1, which indicated that less sludge was produced and was an environmentally friendly product. Therefore, lateritic soil coagulant can be considered a viable alternative in the treatment of landfill leachate.
This study involved synthesising new hybrid polymers called ZOPAT, made up of zinc oxide, acrylamide, and tannin, using a blended technique. The effectiveness of ZOPAT in treating textile wastewater was then tested by measuring floc growth rate, flocculation index, strength factor, and recovery factor under optimised conditions. The study also identified the zeta potential, morphology, elemental composition, and functional groups of the polymers. Response surface methodology determines the optimal pH and ZOPAT dose, resulting in 93% colour, 80% chemical oxygen demand (COD), 100% turbidity, and suspended solids (SS) removal at pH 9.22 and 737 mg/L ZOPAT. The study found that ZOPAT was more effective than commercial Polyaluminium chloride in reducing colour and COD, producing larger and stronger flocs, and requiring a shorter coagulation time of 17.5 min. ZOPAT was also easy to homogenise and operate due to its one-unit dosing system. The study attributes the success of ZOPAT to the presence of Zn, N, and K, which create electrostatic attraction with opposite charged particles, and the formation of dye-particle-dye with amide, hydroxyl, and carboxyl groups in ZOPAT, which remove colour, turbidity, COD, and SS. Overall, the study concludes that ZOPAT has significant potential for textile wastewater treatment.