MyMedR

Displaying all 7 publications

Abstract:

Sort:

Characterization of soy-lignin bonded Rhizophora spp. particleboard as substitute phantom material for radiation dosimetric studies - Investigation of CT number, mass attenuation coefficient and effective atomic number

Zuber SH, Hashikin NAA, Mohd Yusof MF, Aziz MZA, Hashim R

Appl Radiat Isot, 2021 Apr;170:109601.
PMID: 33515930 DOI: 10.1016/j.apradiso.2021.109601

Experimental particleboards are made from Rhizophora spp. wood trunk with three different percentages of lignin and soy flour (0%, 6% and 12%) as adhesives. The objective was to investigate the equivalence of Rhizophora spp. particleboard as phantom material with human soft tissue using Computed Tomography (CT) number. The linear and mass attenuation coefficient of Rhizophora spp. particleboard at low energy range was also explored using X-ray Fluorescence (XRF) configuration technique. Further characterization of the particleboard was performed to determine the effective atomic number, Zeff using Energy Dispersive X-Ray (EDX) method. Adhesive-bonded Rhizophora spp. particleboard showed close similarities with water, based on the average CT numbers, electron density calibration curve and the analysis of CT density profile, compared to the binderless particleboard. The effective atomic number obtained from the study indicated that the attenuation properties of all the particleboards at different percentages of adhesives were almost similar to water. The mass attenuation coefficient calculated from XRF configuration technique showed good agreement with water from XCOM database, suggesting its potential as phantom material for radiation study.
Fulltext Asymptomatic complete distal abdominal aortic occlusion with initial presentation of ruptured intracranial aneurysm

Nadarajan C, Wahid AA, Ng CY, Haron J, Peter JS, Mohd Yusof MF

Radiol Case Rep, 2021 Aug;16(8):1993-1998.
PMID: 34158880 DOI: 10.1016/j.radcr.2021.05.016

Aortoilliac occlusive disease is occlusive atherosclerosis disease involving the distal aorta and bifurcation of iliac arteries and it is a subtype of peripheral arterial disease. Total occlusion of the abdominal aorta is a rare occurrence with an incidence of 3% -8.5% among the aortoiliac occlusive disease patients. We present a case of a 53 years old patient with a background history of hypertension and ex intravenous drug abuser with negative retroviral screening status, with no previous complaints who was brought to the Emergency Department with sudden onset of altered sensorium and 1 episode of seizure. Computed tomography angiogram of the brain showed a ruptured anterior communicating artery aneurysm. Diagnostic conventional angiogram of the brain was planned; however, difficulty was encountered during bilateral femoral artery cannulation with the abrupt termination of bilateral common iliac arteries. Computed tomography angiogram of the abdomen showed incidental finding of total occlusion of the abdominal aorta. As a conclusion, total occlusion of abdominal aorta secondary to aortoiliac occlusive disease with an associated intracranial aneurysm is never reported in the literature to date. This case highlights the possibility of association in between these two conditions which may benefit from further research.
Small field output factor measurement and verification for CyberKnife robotic radiotherapy and radiosurgery system using 3D polymer gel, ionization chamber, diode, diamond and scintillator detectors, Gafchromic film and Monte Carlo simulation

Al Kafi MA, Arib M, Al Moussa A, Alzorkany F, Shehadeh M, Mohd Yusof MF, et al.

Appl Radiat Isot, 2023 Feb;192:110576.
PMID: 36473319 DOI: 10.1016/j.apradiso.2022.110576

The dosimetry of small fields has become tremendously important with the advent of intensity-modulated radiation therapy (IMRT) and stereotactic radiosurgery, where small field segments or very small fields are used to treat tumors. With high dose gradients in the stereotactic radiosurgery or radiotherapy treatment, small field dosimetry becomes challenging due to the lack of lateral electronic equilibrium in the field, x-ray source occlusion, and detector volume averaging. Small volume and tissue-equivalent detectors are recommended to overcome the challenges. With the lack of a perfect radiation detector, studies on available detectors are ongoing with reasonable disagreement and uncertainties. The joint IAEA and AAPM international code of practice (CoP) for small field dosimetry, TRS 483 (Alfonso et al., 2017) provides guidelines and recommendations for the dosimetry of small static fields in external beam radiotherapy. The CoP provides a methodology for field output factor (FOF) measurements and use of field output correction factors for a series of small field detectors and strongly recommends additional measurements, data collection and verification for CyberKnife (CK) robotic stereotactic radiotherapy/radiosurgery system using the listed detectors and more new detectors so that the FOFs can be implemented clinically. The present investigation is focused on using 3D gel along with some other commercially available detectors for the measurement and verification of field output factors (FOFs) for the small fields available in the CK system. The FOF verification was performed through a comparison with published data and Monte Carlo simulation. The results of this study have proved the suitability of an in-house developed 3D polymer gel dosimeter, several commercially available detectors, and Gafchromic films as a part of small field dosimetric measurements for the CK system.
Genetic Diversity of Pineapple (Ananas comosus) Germplasm in Malaysia Using Simple Sequence Repeat (SSR) Markers

Ismail SN, Ghani NSA, Ab Razak SF, Abidin RAZ, Mohd Yusof MF, Zubir MN, et al.

Trop Life Sci Res, 2020 Oct;31(3):15-27.
PMID: 33214853 DOI: 10.21315/tlsr2020.31.3.2

Assessments of genetic diversity have been claimed to be significantly efficient in utilising and managing resources of genetic for breeding programme. In this study, variations in genetic were observed in 65 pineapple accessions gathered from germplasm available at Malaysian Agriculture Research and Development Institute (MARDI) located in Pontian, Johor via 15 markers of simple sequence repeat (SSR). The results showed that 59 alleles appeared to range from 2.0 to 6.0 alleles with a mean of 3.9 alleles per locus, thus displaying polymorphism for all samples at a moderate level. Furthermore, the values of polymorphic information content (PIC) had been found to range between 0.104 (TsuAC035) and 0.697 (Acom_9.9), thus averaging at the value of 0.433. In addition, the expected and the observed heterozygosity of each locus seemed to vary within the ranges of 0.033 to 0.712, and from 0.033 to 0.885, along with the average values of 0.437 and 0.511, respectively. The population structure analysis via method of delta K (ΔK), along with mean of L (K) method, revealed that individuals from the germplasm could be divided into two major clusters based on genetics (K = 2), namely Group 1 and Group 2. As such, five accessions (Yankee, SRK Chalok, SCK Giant India, SC KEW5 India and SC1 Thailand) were clustered in Group 1, while the rest were clustered in Group 2. These outcomes were also supported by the dendrogram, which had been generated through the technique of unweighted pair group with arithmetic mean (UPGMA). These analyses appear to be helpful amongst breeders to maintain and to manage their collections of germplasm. Besides, the data gathered in this study can be useful for breeders to exploit the area of genetic diversity in estimating the level of heterosis.
Fulltext Development of novel microsatellite markers using RAD sequencing technology for diversity assessment of rambutan (Nephelium lappaceum L.) germplasm

Ab Razak S, Mad Radzuan S, Mohamed N, Nor Azman NHE, Abd Majid AM, Ismail SN, et al.

Heliyon, 2020 Sep;6(9):e05077.
PMID: 33024864 DOI: 10.1016/j.heliyon.2020.e05077

The trend of microsatellite marker discovery and development revolved as a result of the advancement of next generation sequencing (NGS) technology as it has developed numerous microsatellites within a short period of time at a low cost. This study generated microsatellite markers using RAD sequencing technologies for the understudied Nephelium lappaceum. A total of 1403 microsatellite markers were successfully designed, which consisted of 853 di-, 525 tri-, 17 tetra-, 5 penta-, and 3 hexanucleotide microsatellite markers. Subsequently, selection of 39 microsatellites was made for the evaluation of genetic diversity of the selected 22 rambutan varieties. Twelve microsatellites, which exhibited high call rates across the samples, were used to assess the diversity of the aforementioned rambutan varieties. The analysis of 12 microsatellites revealed the presence of 72 alleles and six alleles per locus in average. Furthermore, the polymorphic information content (PIC) value ranged from 0.326 (NlaSSR20) to 0.832 (NlaSSR32), which included an average of 0.629 per locus, while the generated Neighbour Joining dendrogram showed two major clusters. The pairwise genetic distance of shared alleles exhibited a range of values from 0.046 (R134↔R170) to 0.818 (R5↔R170), which suggested highest dissimilarity detected between R5 and R170. Notably, these research findings would useful for varietal identification, proper management and conservation of the genetic resources, and exploitation and utilization in future breeding programs.
Fulltext Performance of natural product-based materials as adhesives in the fabrication of mangrove wood composites

Samson DO, Shukri A, Aziz Hashikin NA, Zuber SH, Addo Buba AD, Abdul Aziz MZ, et al.

Heliyon, 2023 Jan;9(1):e13032.
PMID: 36711293 DOI: 10.1016/j.heliyon.2023.e13032

Biodegradable adhesives prepared using three different forms of soy protein-based products (defatted soy flour/soy protein concentrate/soy protein isolate), sodium hydroxide, and itaconic acid polyamidoamine-epichlorohydrin (IA-PAE) with 0 wt%-20 wt% substitution rates were utilized to enhance the production of mangrove wood composites. 1H nuclear magnetic resonance, differential scanning calorimetry, and ultra-high-resolution field emission scanning electron microscopy were employed to characterize the composite samples. Other measurements involved the determination of viscosity, pH, physical, mechanical, dimensional stability, CT numbers, and relative electron density parameters. The ideal curing conditions for the composite bio-adhesives were found to be 15 wt% IA-PAE, 602.50 ± 172.21-391.11 ± 105.82 mPa s, pH 11.0, 180 °C, and 18 min, respectively. The improved physiochemical characteristics of DSF, SPC, and SPI confirmed that NaOH/IA-PAE was integrated into the adhesive system and ameliorated the overall performance of the resulting composites. The results showed that all composite samples, except for those bonded with 0 wt% and 5 wt% IA-PAE, matched up with the quality specification stated in the JIS A-5908 and ASTM D1037. Samples D1, D2, and D3 exhibited optimum characteristics, demonstrating their uses in the development of low-toxicity and sustainable reference tissue substitute phantom in radiological areas.
Fulltext Risk factors related with high sodium intake among Malaysian adults: findings from the Malaysian Community Salt Survey (MyCoSS) 2017-2018

Abdul Aziz NS, Ambak R, Othman F, He FJ, Yusof M, Paiwai F, et al.

J Health Popul Nutr, 2021 05 31;40(Suppl 1):14.
PMID: 34059146 DOI: 10.1186/s41043-021-00233-2

BACKGROUND: High sodium intake was an established risk factor for stroke and cardiovascular diseases. The objective of this study was to investigate factors associated with high sodium intake based on 24-h urinary sodium excretion from the MyCoSS study.
METHODS: The cross-sectional survey was conducted among adults aged 18 years and above in Malaysia. A multi-stage stratified sampling was used to represent nationally. Twenty-four-hour urine was collected from a total of 900 respondents. Indirect ion-selective electrode (ISE) method was used to measure sodium intake. Descriptive and logistic regression analysis was applied to determine factors associated with high sodium intake based on 24-h urinary sodium excretion.
RESULTS: A total of 798 respondents (76% response rate) completed the 24-h urine collection process. Logistic regression revealed that high sodium intake associated with obese [aOR 2.611 (95% CI 1.519, 4.488)], male [aOR 2.436 (95% CI 1.473, 4.030)], having a waist circumference of > 90cm for adult males [aOR 2.260 ( 95% CI 1.020, 5.009) and >80cm for adult females [aOR 1.210 (95% CI 0.556, 2.631)], being a young adult [aOR 1.977 (95% CI 1.094, 3.574)], and living in urban areas [aOR 1.701 (95% CI 1.094, 2.645)].
CONCLUSION: Adults who are obese, have a large waist circumference, of male gender, living in urban areas, and belonging to the young adult age group were found to have higher sodium intake than other demographic groups. Hence, reduction of salt consumption among these high-risk groups should be emphasised to reduce the risk of cardiovascular diseases.