MyMedR

Displaying publications 1 - 20 of 21 in total

Abstract:

Sort:

The impact of surface preparation on shear bond strength of metallic orthodontic brackets bonded with a resin-modified glass ionomer cement

Elnafar AA, Alam MK, Hasan R

J Orthod, 2014 Sep;41(3):201-7.
PMID: 25143559 DOI: 10.1179/1465313314Y.0000000097

The aim of this study was to assess the effects of four enamel preparation techniques on shear bond strength (SBS) of brackets bonded with a resin-modified glass ionomer cement (RMGIC). Adhesive Remnant Index (ARI) and enamel surface roughness (Ra) were also investigated after cement removal.
Fulltext Dental anomalies and their treatment modalities/planning in orthodontic patients

Roslan AA, Rahman NA, Alam MK

J Orthod Sci, 2018;7:16.
PMID: 30271761 DOI: 10.4103/jos.JOS_37_18

OBJECTIVE: This study was carried to study the prevalence of dental anomalies and treatment modalities/planning among the orthodontic patients.
MATERIALS AND METHODS: A total of 370 orthodontic records including their pre-treatment orthopantomographs (OPG) and study models of orthodontic patients in permanent dentition who attended dental clinic were assessed for impaction, hypodontia, supernumerary, supraocclusion, infraocclusion, and any other anomalies excluding the third molars. The association of anomalies with gender status and racial status was analyzed using Pearson's Chi-square test. A P value of <0.05 is considered as significant. The confidence interval at 95% (CI) was set.
RESULTS: Among the 370 subjects, 105 (28.4%) presented with at least one anomaly. Eighty-five (23%) demonstrated a single anomaly and 20 (5.4%) with more than one anomaly. The most prevalent anomaly was impaction (14.32%), followed by hypodontia (7.03%). The less common anomalies were microdontia (1.08%), dilacerations (0.27%), and generalised enamel hypoplasia (0.27%). Maxillary right lateral incisors and canines were the most common affected teeth and these are located on the maxillary right quadrant. It was evident that dental anomalies were statistically dependant on race (P = 0.025), but independent of gender. The most common treatment planned for these patients was fixed appliance.
CONCLUSIONS: Impaction was predominant among 28.4% subjects observed with anomaly and most patients with anomaly are treated with fixed appliances (49%).
CLINICAL RELEVANCE: These anomalies play a great role in occlusion and alignment in treatment planning and relapse for orthodontic treatment.
Predicting sanitary landfill leachate generation in humid regions using ANFIS modeling

Abunama T, Othman F, Younes MK

Environ Monit Assess, 2018 Sep 20;190(10):597.
PMID: 30238169 DOI: 10.1007/s10661-018-6966-y

Landfill leachate is one of the sources of surface water pollution in Selangor State (SS), Malaysia. Leachate volume prediction is essential for sustainable waste management and leachate treatment processes. The accurate estimation of leachate generation rates is often considered a challenge, especially in developing countries, due to the lack of reliable data and high measurement costs. Leachate generation is related to several variable factors, including meteorological data, waste generation rates, and landfill design conditions. Large variations in these factors lead to complicated leachate modeling processes. The aims of this study are to determine the key elements contributing to leachate production and then develop an adaptive neural fuzzy inference system (ANFIS) model to predict leachate generation rates. Accuracy of the final model performance was tested and evaluated using the root mean square error (RMSE), the mean absolute error (MAE), and the correlation coefficient (R). The study results defined dumped waste quantity, rainfall level, and emanated gases as the most significant contributing factors in leachate generation. The best model structure consisted of two triangular fuzzy membership functions and a hybrid training algorithm with eight fuzzy rules. The proposed ANFIS model showed a good performance with an overall correlation coefficient of 0.952.
Fulltext Shear bond strength of orthodontic buccal tubes to porcelain

Purmal K, Alam MK, Sukumaran P

Dent Res J (Isfahan), 2013 Jan;10(1):81-6.
PMID: 23878568 DOI: 10.4103/1735-3327.111805

BACKGROUND: Bonding of molar tubes is becoming more popular in orthodontics. Occasionally, these bonding are done on posterior porcelain crowns or bridges. The purpose of this study was to evaluate the shear bond strength of buccal tubes on feldspathic porcelain crowns with two different methods.
MATERIALS AND METHODS: Forty porcelain right molar crowns were fabricated for this study. The crowns were randomly divided into two groups. In group 1, the crowns were etched with 9.6% hydrofluoric acid, silane coupling agent applied, coated with bonding primer and bonded with Transbond XT (3M Unitek, Monrovia, Calif). In group 2, the crowns were etched with phosphoric acid 37%, silane coupling agent applied, coated with bonding primer and bonded with Transbond XT. All the crowns were stored for 24 hours at 37°C and thermo-cycled before the shear bond test. The analysis of variance (ANOVA) was used to determine whether significant difference were present between the groups.
RESULTS: The results of the analysis of variance (F = 0.23) indicated the shear bond strength of group 1 (3.57 ± 0.87 MPa) was not significantly different (P > 0.05) from group 2 (3.46 ± 0.65 Mpa). Fisher's exact test for the adhesive remnant index (ARI) revealed significant difference between both groups (P < 0.05). Eighty percent of group 1 buccal tubes failed at buccal tube/resin interface and eighty percent of group 2 mostly failed at porcelain/resin interface.
CONCLUSION: Etching with phosphoric acid with the use of silane coupling agent would be safer and should make it easier for clinicians to clean the adhesive on the porcelain surface after debonding.
Periodic Assessment of Peri-implant Tissue Changes: Imperative for Implant Success

Rahman SA, Muhammad H, Haque S, Alam MK

J Contemp Dent Pract, 2019 Feb 01;20(2):173-178.
PMID: 31058631

AIM: The aim of this study was to evaluate the changes in the peri-implant hard and soft tissues and implant stability and to assess the correlation of bone loss and peri-implant probing depth with implant stability.
MATERIALS AND METHODS: Twenty-one patients with implants were included in this study and implants were assessed by resonance frequency analysis (RFA). Bone levels of the implants were assessed by measuring mesial and distal bone levels from the periapical radiograph, and soft tissue was assessed from probing depth using a periodontal probe. Implants were assessed for stability and probing depth at pre-loading, at 3 months and 6 months post-loading. RFA and probing depth were statistically compared from different time points. Correlation of probing depth and marginal bone loss with implant stability was also determined.
RESULTS: The average change in implant stability quotient (ISQ) measurements from pre-loading to 6 months post-loading was found to be statistically significant (p <0.005). The average probing depth reduced from 1.767 mm at pre-loading to 1.671 mm at post-loading 3 months, and 1.600 mm at post-loading 6 months. At 6 months of function, radiographic examination yielded 0.786 mm mesial bone loss and 0.8 mm distal bone loss. It was found to be statistically significant (p <0.005) but within an acceptable range. No significant correlation was found between implant stability and bone loss; and implant stability and probing depth.
CONCLUSION: The study revealed an increasing trend in implant stability values with the time that indicates successful osseointegration. Increasing mean values for mesial and distal bone loss were also found.
CLINICAL SIGNIFICANCE: The success of dental implants is highly dependent on the quality of bone and implant-bone interface, i.e., osseointegration. The most important factors that influence the survival rate of an implant is initial stability. The present study found the changes in the peri-implant hard and soft tissues and implant stability. This article, while being a prospective study, may show the evidence of successful osseointegration by increasing trend in implant stability (RFA) values with time which can help to the clinician in the long-term management of implants.
Fulltext Efficacy of bakuchiol-garlic combination against virulent genes of Candida albicans

Fahim A, Himratul-Aznita WH, Abdul-Rahman PS, Alam MK

PeerJ, 2022;9:e12251.
PMID: 35036111 DOI: 10.7717/peerj.12251

Background: Polymicrobial biofilms are notorious for causing intraoral tissue destruction. Streptococcus sanguinis and Streptococcus mitis, commensals of oral cavities, have been found co-existing with C. albicans in resistant oral infections. There is an urgent need to find alternative treatment options. This study aims to assess the efficacy of garlic (G) and bakuchiol (Bk) combination against candida virulent genes and their subsequently secreted proteins.
Methods: In vitro single species biofilms of C. albicans, and mixed species biofilms formed in combination with streptococci were exposed to bakuchiol and garlic extract (Bk+G). Gene expression of agglutinin-like sequence (ALS1), (ALS3), adhesin-like wall proteins (HWP1) and aspartyl proteinases (SAP5) were determined using qPCR and their subsequent proteins were assessed through Western blotting.
Results: Virulent genes were significantly downregulated in single species biofilms when they were treated with Bk+G combination. However, Bk+G did not have significant effect on ALS1 and HWP1 gene in polymicrobial biofilms. ALS3 and SAP5 were significantly downregulated in Bk+G treated polymicrobial biofilm. Similar results were portrayed in Western blotting.
Conclusion: Bk+G combination exhibited antimicrobial effects against single and mixed species biofilms. The findings might provide insights for treating resistant candida infections. This combination could potentially serve as an herbal alternative to traditional antifungals following further research.
Fulltext Gigantism of the lower limb in Klippel-Trenaunay syndrome: anatomy of the lateral marginal vein

Abdul-Rahman NR, Mohammad KF, Ibrahim S

Singapore Med J, 2009 Jun;50(6):e223-5.
PMID: 19551303

The Klippel-Trenaunay syndrome is a combination of venous and capillary malformations associated with soft tissue and/or bony limb hypertrophy, with or without lymphatic malformations. Although persistent foetal veins are rare, the persistence of the lateral marginal vein is a common association in this syndrome. It results in venous hypertension, which gives rise to venous varicosities, which are commonly seen in this syndrome. This is a case report of a 28-year-old man with Klippel-Trenaunay syndrome, with persistence of the lateral marginal vein, affecting his right lower limb. He was treated with an above-knee amputation. The amputated limb was dissected to demonstrate the anatomy of the lateral marginal vein. To the best of the authors' knowledge, the gross anatomy of the lateral marginal vein has not been previously reported.
Landfill area estimation based on integrated waste disposal options and solid waste forecasting using modified ANFIS model

Younes MK, Nopiah ZM, Basri NE, Basri H, Abushammala MF, Younes MY

Waste Manag, 2016 Sep;55:3-11.
PMID: 26522806 DOI: 10.1016/j.wasman.2015.10.020

Solid waste prediction is crucial for sustainable solid waste management. The collection of accurate waste data records is challenging in developing countries. Solid waste generation is usually correlated with economic, demographic and social factors. However, these factors are not constant due to population and economic growth. The objective of this research is to minimize the land requirements for solid waste disposal for implementation of the Malaysian vision of waste disposal options. This goal has been previously achieved by integrating the solid waste forecasting model, waste composition and the Malaysian vision. The modified adaptive neural fuzzy inference system (MANFIS) was employed to develop a solid waste prediction model and search for the optimum input factors. The performance of the model was evaluated using the root mean square error (RMSE) and the coefficient of determination (R(2)). The model validation results are as follows: RMSE for training=0.2678, RMSE for testing=3.9860 and R(2)=0.99. Implementation of the Malaysian vision for waste disposal options can minimize the land requirements for waste disposal by up to 43%.
Prediction of municipal solid waste generation using nonlinear autoregressive network

Younes MK, Nopiah ZM, Basri NE, Basri H, Abushammala MF, Maulud KN

Environ Monit Assess, 2015 Dec;187(12):753.
PMID: 26573690 DOI: 10.1007/s10661-015-4977-5

Most of the developing countries have solid waste management problems. Solid waste strategic planning requires accurate prediction of the quality and quantity of the generated waste. In developing countries, such as Malaysia, the solid waste generation rate is increasing rapidly, due to population growth and new consumption trends that characterize society. This paper proposes an artificial neural network (ANN) approach using feedforward nonlinear autoregressive network with exogenous inputs (NARX) to predict annual solid waste generation in relation to demographic and economic variables like population number, gross domestic product, electricity demand per capita and employment and unemployment numbers. In addition, variable selection procedures are also developed to select a significant explanatory variable. The model evaluation was performed using coefficient of determination (R(2)) and mean square error (MSE). The optimum model that produced the lowest testing MSE (2.46) and the highest R(2) (0.97) had three inputs (gross domestic product, population and employment), eight neurons and one lag in the hidden layer, and used Fletcher-Powell's conjugate gradient as the training algorithm.
Solid waste forecasting using modified ANFIS modeling

Younes MK, Nopiah ZM, Basri NE, Basri H, Abushammala MF, K N A M

J Air Waste Manag Assoc, 2015 Oct;65(10):1229-38.
PMID: 26223583 DOI: 10.1080/10962247.2015.1075919

Solid waste prediction is crucial for sustainable solid waste management. Usually, accurate waste generation record is challenge in developing countries which complicates the modelling process. Solid waste generation is related to demographic, economic, and social factors. However, these factors are highly varied due to population and economy growths. The objective of this research is to determine the most influencing demographic and economic factors that affect solid waste generation using systematic approach, and then develop a model to forecast solid waste generation using a modified Adaptive Neural Inference System (MANFIS). The model evaluation was performed using Root Mean Square Error (RMSE), Mean Absolute Error (MAE) and the coefficient of determination (R²). The results show that the best input variables are people age groups 0-14, 15-64, and people above 65 years, and the best model structure is 3 triangular fuzzy membership functions and 27 fuzzy rules. The model has been validated using testing data and the resulted training RMSE, MAE and R² were 0.2678, 0.045 and 0.99, respectively, while for testing phase RMSE =3.986, MAE = 0.673 and R² = 0.98.
Fulltext Surface Electromyography (sEMG) Activity of Masticatory Muscle (Masseter and Temporalis) with Three Different Types of Orthodontic Bracket

Nishi SE, Rahman NA, Basri R, Alam MK, Noor NFM, Zainal SA, et al.

Biomed Res Int, 2021;2021:6642254.
PMID: 33969121 DOI: 10.1155/2021/6642254

Objective: This pre-post study is aimed at determining the effects of masticatory muscle activity (masseter and temporalis) measured via sEMG between conventional, self-ligating, and ceramic bracket after six months of orthodontic treatment.
Methods: A total of eighteen (18) malocclusion patients were identified. Malocclusion patients were subdivided into 3 groups based on the bracket selection (conventional, self-ligating, and ceramic bracket) with 6 patients for each group. sEMG of muscles were done using a two-channel electromyography device, where pregelled and self-adhesive electrodes (bilateral) were applied. Chewing and clenching of masseter and temporalis muscle activity were recorded for 20 s pre and 6 months of orthodontic treatment using sEMG (frequency 60 Hz). The data were analysed by using repeated measures ANOVA in IBM SPSS Statistics Version 24.0.
Results: Chewing and clenching for masseter muscle showed no significant difference (P > 0.05) in sEMG activity of three types of the brackets. However, for temporalis muscle, there was a significant difference found in sEMG activity during chewing (P < 0.05) and clenching (P < 0.05) between these three brackets.
Conclusion: The activity of temporalis muscle showed significant changes in chewing and clenching, where the conventional group demonstrated better muscle activity pre and at six months of fixed appliances.
Fulltext Effect of Nd:YAG, Er,Cr:YSGG Laser Irradiation, and Adjunctive Photodynamic Therapy on Push-Out Bond Strength of Zirconia Posts to Radicular Dentin

Alshammary F, Karobari MI, Assiry AA, Marya A, Shaikh GM, Siddiqui AA, et al.

Biomed Res Int, 2021;2021:5523242.
PMID: 34036099 DOI: 10.1155/2021/5523242

This study is aimed at assessing the influence of Nd:YAG, Er,Cr:YSGG laser irradiation, and adjunctive photodynamic therapy (aPDT) on the bond strength of zirconia posts to radicular dentin. Eighty extracted anterior teeth were randomly categorized into 4 groups (n = 20) based on varying laser irradiation treatments, i.e., conventional cleaning and shaping (CCS), Nd:YAG, Er,Cr:YSGG, and aPDT group, respectively. Using a cutting machine, the samples were prepared for push-out bond strength analysis; 4 sections (2 on each apical and cervical) of around 1 mm thickness were sectioned for all roots at a right angle to the long axis of the post. After making the space for the post, they were incorporated into the root system and were subjected to different laser treatments. The universal testing machine was utilized to assess the push-out bond strength, which had a defined 1 mm/minute crosshead speed until the failure was encountered. Specimens in the aPDT group (8.20 ± 2.14 MPa) demonstrated the highest mean push-out bond strength, whereas the lowest was shown by samples in the CCS group (7.08 ± 1.11 MPa). According to the independent t-test, the mean push-out bond strength scores of the cervical segments were higher as compared to the apical segments in research groups (p < 0.05). Overall, the adhesive type was the most frequently encountered failure mode in all of the experimental groups, with the least number of failures observed in aPDT treated teeth samples. In conclusion, the push-out bond strength to radicular dentin was not much influenced by Nd:YAG, Er,Cr:YSGG laser, and aPDT in comparison with CCS. Although statistically not significant, however, the application of aPDT provided better outcomes as compared to other research groups.
Fulltext Effect of Fiber Loading on Thermal Properties of Cellulosic Washingtonia Reinforced HDPE Biocomposites

Bahlouli S, Belaadi A, Makhlouf A, Alshahrani H, Khan MKA, Jawaid M

Polymers (Basel), 2023 Jun 30;15(13).
PMID: 37447555 DOI: 10.3390/polym15132910

In this research work, we aim to study the effect of the incorporation of vegetable fiber reinforcement on the thermo-mechanical and dynamic properties of a composite formed by a polymeric matrix reinforced with cellulosic fibers with the various Washingtonia fiber (WF) loadings (0%, 10%, 20%, and 30% by wt%) as reinforced material in high-density polyethylene (HDPE) Biocomposites to evaluate the optimum fiber loading of biocomposites. In addition, several characterization techniques (i.e., thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and thermal mechanical analysis (TMA)) were used to better understand the characteristics of the new composites prepared. With these techniques, we managed to verify the rigidity and thermal stability of the composites so elaborated, as well as the success of the polymer and the structural homogeneity of the obtained biocomposites. Hence, the biocomposite with the best ratio (HDPE/20WF) showed a loss modulus (E″) of 224 MPa, a storage modulus (E') of 2079 MPa, and a damping factor (Tanδ) of 0.270 to the glass transition (Tg) of 145 °C. In addition, thermomechanical analysis (TMA) of the biocomposite samples exhibited marginally higher Ts compared to the HDPE matrix. The best results were recorded with biocomposites with 20% WF, which showed better thermal properties. This composite material can be used as insulation in construction materials (buildings, false ceilings, walls, etc.).
Fulltext Protozoan parasites of four species of wild anurans from a local zoo in Malaysia

Mohammad KN, Badrul MM, Mohamad N, Zainal-Abidin AH

Trop Biomed, 2013 Dec;30(4):615-20.
PMID: 24522131 MyJurnal

The parasitic protozoan fauna in sixty-six anurans comprising of Duttaphrynus melanostictus, Phrynoidis juxtaspera, Hylarana erythraea and Polypedates leucomystax collected from Zoo Negara Malaysia was investigated. The distribution and prevalence rate of parasitic species in the digestive tract and blood were examined. Seven species of intestinal protozoa (Opalina ranarum, Cepedea dimidiata, Nycthetorus cordiformis, Entamoeba ranarum, Iodamoeba butschlii, Endamoeba blattae, and Tritrichomonas sp.) and two species of blood protozoa (Lankesterella sp. and Trypanosoma sp.) were recorded. Opalina ranarum was the most common protozoan found in the rectum and intestine (prevalence rate: 34.8%) infecting all host species, with P. juxtaspera heavily infected with the parasite, whereas Tritrichomonas sp. was the least prevalent intestinal species infecting only D. melanostictus. Both Lankesterella sp. and Trypanosoma sp. were found in the blood of H. erythraea.
Arthrospira platensis transglutaminase derived antioxidant peptide-packed electrospun chitosan/ poly (vinyl alcohol) nanofibrous mat accelerates wound healing, in vitro, via inducing mouse embryonic fibroblast proliferation

Sannasimuthu A, Ramani M, Paray BA, Pasupuleti M, Al-Sadoon MK, Alagumuthu TS, et al.

Colloids Surf B Biointerfaces, 2020 Sep;193:111124.
PMID: 32464357 DOI: 10.1016/j.colsurfb.2020.111124

In this present study, we have carried out the antioxidant function of transglutaminase (TG) identified from Arthrospira platensis (Ap) transcriptome. The antioxidant peptide ML11 (MLRSIGIPARL) has been predicted from the transglutaminase core domain and the peptide's free radical scavenging potential was evaluated and it shows that it functions on a dose dependent manner. The ML11 peptide cell toxicity was analysed in the human blood leucocytes which resulted no cytotoxic activity in any of the cell population. Moreover, the nanofibre mat encapsulated with antioxidant peptide ML11 was prepared by electrospinning technique. The antioxidant peptide ML11 encapsulated mat showed increase in fibre diameter compared to the chitosan polyvinyl alcohol blended mat. The change in the crystalline behaviour of both chitosan and polyvinyl alcohol polymer to the amorphous nature was determined by X-ray diffraction at the broad band between 20 and 30° (2θ°). FTIR revealed the functional groups which present in the polymer as well as the interaction between their components of chitosan (CS) and polyvinyl alcohol (PVA). The fibre retains the antioxidant activity due to the peptide encapsulated by scavenging the intracellular ROS that was confirmed by flowcytometry and fluorescence microscopy. The ML11 peptide encapsulated mat showed no cytotoxicity in the NIH-3T3 mouse embryonic fibroblast cells. Also, ML11 peptide encapsulated fibre showed potential wound healing activity in NIH-3T3 cells. Taken altogether, the study indicates that the wound healing potential of the ML11 peptide encapsulated nano fibre mat may be used as biopharmaceutical drug.
Fulltext Assessment of Mineral Nutrient Efficiency in Genetically Diverse Spinach Accessions by Biochemical and Functional Marker Strategies

Rashid M, Yousaf Z, Din A, Munawar M, Aftab A, Riaz N, et al.

Front Plant Sci, 2022;13:889604.
PMID: 35707614 DOI: 10.3389/fpls.2022.889604

Leafy vegetable crops are considered as a natural source of mineral nutrients that could decrease the risk factor of many growth issues in children and adults. Spinach is globally considered as the most desirable leafy crop, due to its taste and nutrient richness along with greater nitrate contents and better nitrogen use efficiency. To evaluate the mineral nutrient efficiency of this crop, thirty genetically diverse spinach accessions were analyzed through nutritional and functional marker strategies. The accession 163,310 from Pakistan was found to be rich in minerals (sodium, calcium, potassium, zinc, and manganese) and nitrates. However, the oxalate contents were lesser in the accessions that had greater quantity of nutrients. These represented a negative correlation between mineral availability and oxalate accumulation in the leaves. To study the relationship of oxalates and minerals in the accessions, a functional marker analysis was performed, based on the genes involved in oxalate metabolism and disease resistance in spinach. High level of genetic polymorphism was observed among the accessions represented with 115 polymorphic bands out of 130 bands. Heat map clustering represented the accessions from Asian countries (Pakistan, India, China, and Iran) as the most adaptable accessions to the local environment. The correlation between nutritional and genetic analysis also revealed the nutrient richness of these accessions along with good oxalate metabolism and disease resistance. Hence, these accessions could be considered as useful genotypes in future breeding programs.
Fulltext Polyphenol Rich Ajuga bracteosa Transgenic Regenerants Display Better Pharmacological Potential

Rubnawaz S, Kayani WK, Akhtar N, Mahmood R, Khan A, Okla MK, et al.

Molecules, 2021 Aug 11;26(16).
PMID: 34443462 DOI: 10.3390/molecules26164874

Ajuga bracteosa Wall. ex Benth. is an endangered medicinal herb traditionally used against different ailments. The present study aimed to create new insight into the fundamental mechanisms of genetic transformation and the biological activities of this plant. We transformed the A. bracteosa plant with rol genes of Agrobacterium rhizogenes and raised the regenerants from the hairy roots. These transgenic regenerants were screened for in vitro antioxidant activities, a range of in vivo assays, elemental analysis, polyphenol content, and different phytochemicals found through HPLC. Among 18 polyphenolic standards, kaempferol was most abundant in all transgenic lines. Furthermore, transgenic line 3 (ABRL3) showed maximum phenolics and flavonoids content among all tested plant extracts. ABRL3 also demonstrated the highest total antioxidant capacity (8.16 ± 1 μg AAE/mg), total reducing power, (6.60 ± 1.17 μg AAE/mg), DPPH activity (IC50 = 59.5 ± 0.8 μg/mL), hydroxyl ion scavenging (IC50 = 122.5 ± 0.90 μg/mL), and iron-chelating power (IC50 = 154.8 ± 2 μg/mL). Moreover, transformed plant extracts produced significant analgesic, anti-inflammatory, anticoagulant, and antidepressant activities in BALB/c mice models. In conclusion, transgenic regenerants of A. bracteosa pose better antioxidant and pharmacological properties under the effect of rol genes as compared to wild-type plants.
Fulltext Impact of Portraiture Photography on Orthodontic Treatment: A Systematic Review and Meta-Analysis

Alam MK, Abutayyem H, Alotha SN, H Alsiyat BM, K Alanazi SH, Hammad Alrayes MH, et al.

Cureus, 2023 Oct;15(10):e48054.
PMID: 37933372 DOI: 10.7759/cureus.48054

Due to the clear depiction of facial aesthetics and other craniofacial parameters, portraiture photography (PP) is becoming more and more necessary in modern clinical practice. The studies chosen for this review's inclusion looked at how PP affected the orthodontic treatment and diagnostic procedure on the subjects who were watched in the studies. Studies published within the last decade precisely from 2013 were searched for across major online databases after devising a proper search strategy. Multiple reviewers created a specific data extraction form that was used for the investigation, followed by the evaluation of bias and the variables found in each of the chosen papers. This form was meant for the assessment for various variables encountered in this study. According to the meta-analysis, using PP was related with a statistically significant decrease in the risk of orthodontic treatment and diagnostic modalities, with odds ratios (OR) of 0.52 with a 95% confidence interval (CI) of (0.28, 0.96), and a relative risk (RR) of 0.66 with a CI of (0.45, 0.96). In orthodontics, PP is an important tool that offers useful data for diagnosis, treatment planning, and tracking treatment success. To validate the results of studies like ours, a sizable evidence sample is required due to the limited number of trials that have been performed in this area.
Modeling and optimization by particle swarm embedded neural network for adsorption of methylene blue by jicama peroxidase immobilized on buckypaper/polyvinyl alcohol membrane

Jun LY, Karri RR, Yon LS, Mubarak NM, Bing CH, Mohammad K, et al.

Environ Res, 2020 04;183:109158.
PMID: 32044575 DOI: 10.1016/j.envres.2020.109158

Jicama peroxidase (JP) immobilized functionalized Buckypaper/Polyvinyl alcohol (BP/PVA) membrane was synthesized and evaluated as a promising nanobiocomposite membrane for methylene blue (MB) dye removal from aqueous solution. The effects of independent process variables, including pH, agitation speed, initial concentration of hydrogen peroxide (H2O2), and contact time on dye removal efficiency were investigated systematically. Both Response Surface Methodology (RSM) and Artificial Neural Network coupled with Particle Swarm Optimization (ANN-PSO) approaches were used for predicting the optimum process parameters to achieve maximum MB dye removal efficiency. The best optimal topology for PSO embedded ANN architecture was found to be 4-6-1. This optimized network provided higher R2 values for randomized training, testing and validation data sets, which are 0.944, 0.931 and 0.946 respectively, thus confirming the efficacy of the ANN-PSO model. Compared to RSM, results confirmed that the hybrid ANN-PSO shows superior modeling capability for prediction of MB dye removal. The maximum MB dye removal efficiency of 99.5% was achieved at pH-5.77, 179 rpm, ratio of H2O2/MB dye of 73.2:1, within 229 min. Thus, this work demonstrated that JP-immobilized BP/PVA membrane is a promising and feasible alternative for treating industrial effluent.
Histopathological changes of reproductive organs of goats immunized with Corynebacterium pseudotuberculosis killed vaccine

Umer M, Jesse FFA, Mohammed Saleh WM, Chung ELT, Haron AW, Saharee AA, et al.

Microb Pathog, 2020 Dec;149:104539.
PMID: 33007431 DOI: 10.1016/j.micpath.2020.104539

Caseous lymphadenitis (CLA) caused by Corynebacterium pseudotuberculosis is characterized by the development of abscesses, mainly in superficial and internal lymph nodes, visceral and reproductive organs in small ruminants. This study aims to examine the histopathological changes in reproductive organs of goats immunized with killed vaccine of C. pseudotuberculosis. In this study, twenty four (24) clinically healthy bucks and does were divided into four groups A, B, C and D. Animals in groups A and B were immunized with 0.5 and 1% formalin killed vaccine, respectively; followed by a booster dose. After the booster dose of immunization, groups A, B and C were challenged with C. pseudotuberculosis at 106 cfu/ml. Goats in group D were immunize and unchallenged and left as control group. All C. pseudotuberculosis infected animals were euthanized humanely 12 weeks post-challenged. Tissue samples such as testes, epididymis, spermatic cord, penis, pituitary gland, mammary gland, vulva, vagina, cervix, uterus, fallopian tube and ovaries were collected for histopathology study. Microscopic examination of all tissues (testes, seminiferous tubules, spermatic cord, penile tissues and the pituitary gland) in the male reproductive organs of the bucks that were inoculated with 2 ml of 0.5% and 1.0% of C. pseudotuberculosis killed vaccine showed normal (animals inoculated with 1.0%) to mild (animals inoculated with 0.5%) histopathological changes when compared with those from group C which showed varying degrees of histopathological changes (p

Filters

Please provide feedback to Administrator ([email protected])

External Links