Displaying all 17 publications

Abstract:
Sort:
  1. Fulltext Factors associated with discharge against medical advice from emergency department, Universiti Kebangsaan Malaysia Medical Centre
    Ismail, A.K., Mohamad Ali, S., Che' Man, Z.
    Medicine & Health, 2016;11(1):29-37.
    MyJurnal
    Patients who self-discharge against medical advice (DAMA) are susceptible to life-threatening consequences. By understanding the factors associated with DAMA, healthcare centres can build strategies to assist patients to receive optimal medical care and prevent unfavourable outcome. The objective of this study was to determine the factors associated with DAMA from the Emergency Department (ED) of Universiti Kebangsaan Malaysia Medical Centre (UKMMC). This was a prospective unmatched case control study conducted over a 4-month period. For every DAMA episode, two patients who were admitted on the same day were randomly selected as control. Following patient consent, data was collected using a standardized questionnaire. Patients were contacted by the investigator for information regarding hospitalization within two weeks of DAMA. Ninety three patients were recruited; 31 DAMA patients and 62 admitted patients. Payment method was significantly associated with DAMA (OR 3.17 95% CI 1.29-7.98; p=0.01). The likelihood of self-paying patients to take DAMA was three times higher than those who had a guarantor letter from their employer or insurance provider. Other factors which influence DAMA were family obligations (OR 4.08 95% CI 1.09-15.26; p = 0.03) and work problems (OR 3.83 95% CI 1.13-12.94; p=0.03). A total of 19.4% of DAMA patients left following symptomatic pain relief. A total of 80.6% DAMA patients were admitted to hospital within two weeks of the DAMA episode. Payment method significantly influences DAMA. Payment planning, social welfare services, non-governmental organization funds and the introduction of a national health policy scheme may aid hospital payment, alleviate financial limitation of patients and reduce DAMA episodes.
  2. Physicochemical and sorption characteristics of Malaysian Ceiba pentandra (L.) Gaertn. as a natural oil sorbent
    Abdullah MA, Rahmah AU, Man Z
    J Hazard Mater, 2010 May 15;177(1-3):683-91.
    PMID: 20060641 DOI: 10.1016/j.jhazmat.2009.12.085
    Ceiba pentandra (L.) Gaertn (kapok) is a natural sorbent that exhibits excellent hydrophobic-oleophilic characteristics. The effect of packing density, the oil types and solvent treatment on the sorption characteristics of kapok was studied in a batch system. Oil sorption capacity, retention capacity, entrapment stability and kapok reusability were evaluated. Based on SEM and FTIR analyses, kapok fiber was shown to be a lignocellulosic material with hydrophobic waxy coating over the hollow structures. Higher packing density at 0.08 g/ml showed lower sorption capacity, but higher percentage of dynamic oil retention, with only 1% of oil drained out from the test cell. Kapok remained stable after fifteen cycles of reuse with only 30% of sorption capacity reduction. The oil entrapment stability at 0.08 g/ml packing was high with more than 90% of diesel and used engine oil retained after horizontal shaking. After 8h of chloroform and alkali treatment, 2.1% and 26.3% reduction in sorption capacity were observed, respectively, as compared to the raw kapok. The rigid hollow structure was reduced to flattened-like structure after alkali treatment, though no major structural difference was observed after chloroform treatment. Malaysian kapok has shown great potential as an effective natural oil sorbent, owing to high sorption and retention capacity, structural stability and high reusability.
  3. Fulltext Effects of Phase Separation Behavior on Morphology and Performance of Polycarbonate Membranes
    Idris A, Man Z, Maulud AS, Khan MS
    Membranes (Basel), 2017 Apr 05;7(2).
    PMID: 28379173 DOI: 10.3390/membranes7020021
    The phase separation behavior of bisphenol-A-polycarbonate (PC), dissolved in N-methyl-2-pyrrolidone and dichloromethane solvents in coagulant water, was studied by the cloud point method. The respective cloud point data were determined by titration against water at room temperature and the characteristic binodal curves for the ternary systems were plotted. Further, the physical properties such as viscosity, refractive index, and density of the solution were measured. The critical polymer concentrations were determined from the viscosity measurements. PC/NMP and PC/DCM membranes were fabricated by the dry-wet phase inversion technique and characterized for their morphology, structure, and thermal stability using field emission scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis, respectively. The membranes' performances were tested for their permeance to CO₂, CH₄, and N₂ gases at 24 ± 0.5 °C with varying feed pressures from 2 to 10 bar. The PC/DCM membranes appeared to be asymmetric dense membrane types with appreciable thermal stability, whereas the PC/NMP membranes were observed to be asymmetric with porous structures exhibiting 4.18% and 9.17% decrease in the initial and maximum degradation temperatures, respectively. The ideal CO₂/N₂ and CO₂/CH₄ selectivities of the PC/NMP membrane decreased with the increase in feed pressures, while for the PC/DCM membrane, the average ideal CO₂/N₂ and CO₂/CH₄ selectivities were found to be 25.1 ± 0.8 and 21.1 ± 0.6, respectively. Therefore, the PC/DCM membranes with dense morphologies are appropriate for gas separation applications.
  4. Fulltext Intention to seek medical consultation for symptoms of upper respiratory tract infection – a cross-sectional survey
    Tan CE, Mohd Roozi AH, Wong WHR, Sabaruddin SAH, Ghani NI, Che Man Z
    International Medical Journal Malaysia, 2015;14(2):9-16.
    MyJurnal
    Introduction: The common cold is the commonest reason for primary care encounters worldwide. This paper aims to describe the reasons that influence patients to seek medical consultation for the common cold.
    Methods: This was a cross-sectional survey conducted among adult patients of an urban teaching primary care clinic. An adapted bilingual survey form was administered by the researchers to obtain data regarding their decision to seek medical consultation for a cold and the reasons for their decision. Quantitative analyses were done to describe the close-ended responses. Open-ended responses were analysed using a qualitative approach and
    the frequencies of the themes were reported. Results: A total of 320 respondents participated in this study, with a response rate of 91.4%. They were predominantly females (59.4%), Malay (70.9%), and had tertiary education (65.9%). More than half of the patients (52.5%) said they would seek consultation for cold symptoms. Fever was the commonest symptom (57-61%) which compelled them to seek consultation. The commonest reason for seeking consultation was to get medications (41.7%), whereas the commonest reason not to seek consultation was the practice of self-medication (44.2%). Ethnicity was found to be significantly associated with the decision to seek doctor’s consultation.
    Conclusion: Colds are usually self-limiting and do not result in complications. Empowering
    patients by providing appropriate self-care knowledge can help to reduce the burden of primary care services.
    Patients should be taught about red flag symptoms as well as drug safety for medications commonly taken for
    colds.
    Keywords: Upper respiratory tract infections, patient acceptance of health care, primary health care.
  5. Fulltext Potential biosorbent derived from Calligonum polygonoides for removal of methylene blue dye from aqueous solution
    Nasrullah A, Khan H, Khan AS, Man Z, Muhammad N, Khan MI, et al.
    ScientificWorldJournal, 2015;2015:562693.
    PMID: 25705714 DOI: 10.1155/2015/562693
    The ash of C. polygonoides (locally called balanza) was collected from Lakki Marwat, Khyber Pakhtunkhwa, Pakistan, and was utilized as biosorbent for methylene blue (MB) removal from aqueous solution. The ash was used as biosorbent without any physical or chemical treatment. The biosorbent was characterized by using various techniques such as Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The particle size and surface area were measured using particle size analyzer and Brunauer-Emmett-Teller equation (BET), respectively. The SEM and BET results expressed that the adsorbent has porous nature. Effects of various conditions such as initial concentration of methylene blue (MB), initial pH, contact time, dosage of biosorbent, and stirring rate were also investigated for the adsorption process. The rate of the adsorption of MB on biomass sample was fast, and equilibrium has been achieved within 1 hour. The kinetics of MB adsorption on biosorbent was studied by pseudo-first- and pseudo-second-order kinetic models and the pseudo-second-order has better mathematical fit with correlation coefficient value (R (2)) of 0.999. The study revealed that C. polygonoides ash proved to be an effective, alternative, inexpensive, and environmentally benign biosorbent for MB removal from aqueous solution.
  6. Dissolution and delignification of bamboo biomass using amino acid-based ionic liquid
    Muhammad N, Man Z, Bustam MA, Mutalib MI, Wilfred CD, Rafiq S
    Appl Biochem Biotechnol, 2011 Oct;165(3-4):998-1009.
    PMID: 21720837 DOI: 10.1007/s12010-011-9315-y
    In the present work, the dissolution of bamboo biomass was tested using a number of ionic liquids synthesized in laboratory. It was observed that one of the synthesized amino acid-based ionic liquids, namely 1-ethyl-3-methylimidazolium glycinate, was capable of dissolving the biomass completely. The dissolved biomass was then regenerated using a reconstitute solvent (acetone/water) and was characterized using Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The results were compared to preconditioned bamboo biomass. The regenerated biomass was found to have a more homogenous macrostructure, which indicates that the crystalline form and structure of its cellulose has changed from type Ι to type ΙΙ during the dissolution and regeneration process.
  7. Composite amine mixed matrix membranes for high-pressure CO2-CH4 separation: synthesis, characterization and performance evaluation
    Fauzan NAB, Mukhtar H, Nasir R, Mohshim DFB, Arasu N, Man Z, et al.
    R Soc Open Sci, 2020 Sep;7(9):200795.
    PMID: 33047043 DOI: 10.1098/rsos.200795
    The key challenge in the synthesis of composite mixed matrix membrane (MMMs) is the incompatible membrane fabrication using porous support in the dry-wet phase inversion technique. The key objective of this research is to synthesize thin composite ternary (amine) mixed matrix membranes on microporous support by incorporating 10 wt% of carbon molecular sieve (CMS) and 5-15 wt% of diethanolamine (DEA) in polyethersulfone (PES) dope solution for the separation of carbon dioxide (CO2) from methane (CH4) at high-pressure applications. The developed membranes were evaluated for their morphological structure, thermal and mechanical stabilities, functional groups, as well as for CO2-CH4 separation performance at high pressure (10-30 bar). The results showed that the developed membranes have asymmetric structure, and they are mechanically strong at 30 bar. This new class of PES/CMS/DEA composite MMMs exhibited improved gas permeance compared to pure PES composite polymeric membrane. CO2-CH4 perm-selectivity enhanced from 8.15 to 16.04 at 15 wt% of DEA at 30 bar pressure. The performance of amine composite MMMs is theoretically predicted using a modified Maxwell model. The predictions were in good agreement with experimental data after applying the optimized values with AARE % = ∼less than 2% and R2 = 0.99.
  8. Fulltext Profile and outcome of post stroke patients managed at selected public primary care health centres in Peninsular Malaysia: A retrospective observational study
    Abdul Aziz AF, Ali MF, Yusof MF, Che' Man Z, Sulong S, Aljunid SM
    Sci Rep, 2018 12 19;8(1):17965.
    PMID: 30568180 DOI: 10.1038/s41598-018-36154-0
    Data on post stroke outcomes in developing countries are scarce due to uncoordinated healthcare delivery systems. In Malaysia, the national stroke clinical practice guideline does not address transfer of care and longer term post stroke care beyond tertiary care. Hence, post stroke care delivery may be delivered at either tertiary or primary care facilities. This study aimed at describing patients' characteristics and outcomes of post stroke care delivered by the primary care teams at public primary care healthcentres across Peninsular Malaysia. Multi staged sampling was done to select public primary care health centres to recruit post stroke patients. At each health centre, convenience sampling was done to recruit adult patients (≥18 years) who received post stroke care between July-December 2012. Baseline measurements were recorded at recruitment and retrospective medical record review was done simultaneously, for details on medical and / or rehabilitation treatment at health centre. Changes in the measurements for post stroke care were compared using paired t-tests and Wilcoxon Rank test where appropriate. Total of 151 patients were recruited from ten public primary care healthcentres. The mean age at stroke presentation was 55.8 ± 9.8 years. Median duration of follow up was 2.3 (IQR 5.1) years. Majority co-resided with a relative (80.8%), and a family member was primary caregiver (75.%). Eleven percent were current smokers. Almost 71.0% of patients achieved BP ≤ 140/90 mmHg. Only 68.9% of the patients had been referred for neurorehabilitation. Percentage of recorded data was highest for blood pressure (88.1%) while lowest was HbA1c (43.0%). For clinical outcomes, systolic and diastolic blood pressure, triglyceride level and calculated GFR (eGFR) showed statistically significant changes during follow up (p 
  9. Photo-oxidative degradation of motorcycle helmets in Hanoi, Vietnam: A prospective preliminary study
    Ramli R, Che Man Z, Nordin R, Abdul Karim F, Rashdi MF, Oxley J, et al.
    Traffic Inj Prev, 2016 Sep;17 Suppl 1:79-85.
    PMID: 27586107 DOI: 10.1080/15389588.2016.1203428
    OBJECTIVE: Vietnamese spend hours travelling on the road using their motorcycles. Their helmets are exposed continuously to sunlight and rain. The objectives of this study were to determine the association between the effect of photo-oxidative degradation (POD) of the outer shells and helmet age on helmet damage. The micro-structural change of the outer shell was also investigated.

    METHODS: This was a prospective, cross sectional study recruiting injured motorcyclists from Hanoi, Vietnam hospital. The participants were interviewed by a trained researcher. The participants' helmets were collected post-crash. Initially, the helmets were examined for their type and external characteristics. A 3 cm × 3 cm cut was made on the helmet in the impacted and non-impacted areas (control). These areas were investigated for evidence of POD and presence of micro-cracks and material disintegration. 50 participants were enrolled. Sources of information included questionnaire and laboratory analyses. The helmet factors of interest were age of the helmet, exposure of helmet to sunlight and rain (duration/day) and history of previous impact. Laboratory analyses included Fourier Transform Infra Red (FTIR) for degradation and scanning electron microscopy (SEM) for micro-structural examination.

    RESULTS: Majority of the helmets was the open-face type, 40 (80.0%). 31 (62.0%) helmets aged less than three years (LTY) and 19 (38.0%) were three years old or more (MTY). 19 (61.3%) of the LTY helmets and 12 (63.2%) MTY helmets showed evidence of POD. The duration of helmet exposure to sunlight was between 93 to 6570 hours (mean 2347.74 hours; SD 1733.39). The SEM showed 15 helmets (30%) with micro-fractures, 21 helmets (42.0%) with material disintegration. Prolonged uv exposure to the ABS helmets resulted in changes in the helmet material in the form of material disintegration and microcracks and this association was statistically significant (p = 0.03).

    CONCLUSION: POD occurs due to routine exposure to the ultraviolet light. Prolonged uv exposure affects outer shell surface material integrity.

  10. Efficient conversion of lignocellulosic biomass to levulinic acid using acidic ionic liquids
    Khan AS, Man Z, Bustam MA, Nasrullah A, Ullah Z, Sarwono A, et al.
    Carbohydr Polym, 2018 Feb 01;181:208-214.
    PMID: 29253965 DOI: 10.1016/j.carbpol.2017.10.064
    In the present research work, dicationic ionic liquids, containing 1,4-bis(3-methylimidazolium-1-yl) butane ([C4(Mim)2]) cation with counter anions [(2HSO4)(H2SO4)0], [(2HSO4)(H2SO4)2] and [(2HSO4)(H2SO4)4] were synthesised. ILs structures were confirmed using 1H NMR spectroscopy. Thermal stability, Hammett acidity, density and viscosity of ILs were determined. Various types of lignocellulosic biomass such as rubber wood, palm oil frond, bamboo and rice husk were converted into levulinic acid (LA). Among the synthesized ionic liquids, [C4(Mim)2][(2HSO4)(H2SO4)4] showed higher % yield of LA up to 47.52 from bamboo biomass at 110°C for 60min, which is the better yield at low temperature and short time compared to previous reports. Surface morphology, surface functional groups and thermal stability of bamboo before and after conversion into LA were studied using SEM, FTIR and TGA analysis, respectively. This one-pot production of LA from agro-waste will open new opportunity for the conversion of sustainable biomass resources into valuable chemicals.
  11. Swelling mechanism of urea cross-linked starch-lignin films in water
    Sarwono A, Man Z, Bustam MA, Subbarao D, Idris A, Muhammad N, et al.
    Environ Technol, 2018 Jun;39(12):1522-1532.
    PMID: 28524800 DOI: 10.1080/09593330.2017.1332108
    Coating fertilizer particles with thin films is a possibility to control fertilizer release rates. It is observed that novel urea cross-linked starch-lignin composite thin films, prepared by solution casting, swell on coming into contact with water due to the increase in volume by water uptake by diffusion. The effect of lignin content, varied from 0% to 20% in steps of 5% at three different temperatures (25°C, 35°C and 45°C), on swelling of the film was investigated. By gravimetric analysis, the equilibrium water uptake and diffusion coefficient decrease with lignin content, indicating that the addition of lignin increases the hydrophobicity of the films. When temperature increases, the diffusion coefficient and the amount of water absorbed tend to increase. Assuming that swelling of the thin film is by water uptake by diffusion, the diffusion coefficient is estimated. The estimated diffusion coefficient decreases from 4.3 to 2.1 × 10-7 cm2/s at 25°C, from 5.3 to 2.9 × 10-7 cm2/s at 35°C and from 6.2 to 3.8 × 10-7 cm2/s at 45°C depending on the lignin content. Activation energy for the increase in diffusion coefficient with temperature is observed to be 16.55 kJ/mol. An empirical model of water uptake as a function of percentage of lignin and temperature was also developed based on Fick's law.
  12. Fulltext BNT162b2 COVID-19 Vaccination and Its Effect on Blood Pressure
    Tan TL, Salleh SA, Che Man Z, Tan MHP, Kader R, Jarmin R
    Medicina (Kaunas), 2022 Dec 05;58(12).
    PMID: 36556993 DOI: 10.3390/medicina58121789
    Background and Objectives: The objective of this study is to examine the effect of the BNT162b2 vaccine on systolic blood pressure (SBP), diastolic blood pressure (DBP), mean arterial pressure (MAP), and pulse pressure (PP) before and 15 min after two doses that were given 21 days apart. Materials and Methods: This active surveillance study of vaccine safety was conducted on 15 and 16 March (for the first dose) and 5 and 6 April (for the second dose) 2021 in an academic hospital. For both doses, SBP, DBP, MAP, and PP levels were measured before and 15 min after both doses were given to healthcare workers over the age of 18. The results of the study were based on measurements of the mean blood pressure (BP), the mean changes in BP, and the BP trends. Results: In total, 287 individuals received the vaccine. After the first dose, 25% (n = 72) of individuals had a decrease in DBP of at least 10 mmHg (mean DBP decrease: 15 mmHg, 95% CI: 14-17 mmHg), and after the second dose it was 12.5% (mean DBP decrease: 13 mmHg, 95% CI: 12-15 mmHg). After the first dose, 28.6% (n = 82) had a PP that was wider than 40 mmHg. After the first dose, 5.2% and 4.9% of the individuals experienced an increase or decrease in SBP, respectively, of more than 20 mmHg. After the second dose, the SBP of 11% (n = 32) decreased by at least 20 mmHg. Conclusions: Improved understanding of vaccine effects on BP may help address vaccine hesitancy in healthcare workers.
  13. Fulltext Usage of traditional and complementary medicine (T & CM): Prevalence, practice and perception among post stroke patients attending conventional stroke rehabilitation in a teaching hospital in Malaysia
    Ali MF, Abdul Aziz AF, Rashid MR, Che Man Z, Amir AA, Lim YS, et al.
    Med J Malaysia, 2015 Feb;70(1):18-23.
    PMID: 26032524
    INTRODUCTION: The lack of evidence that proves the benefit of traditional and complementary medicines (T & CM) in treating chronic medical conditions does not deter its usage among patients worldwide. Prevalence of usage among post-stroke patients in Malaysia especially is unknown. This study aims to determine the prevalence, practice and perception of T & CM use among stroke survivors attending an outpatient rehabilitation program in a teaching hospital.
    METHODS: A cross-sectional study was conducted among 104 post stroke patients attending an outpatient rehabilitation program. A structured self-administered questionnaire was used to collect data on sociodemographic and clinical profile of patients, as well as types of therapy used and perception on T & CM usage. Descriptive analysis was done, and bivariate analysis was used to determine associations between categorical data.
    RESULTS: Mean age of patients was 62 years (SD 12.2), 54% were Chinese and 75% of the patients had ischaemic stroke. Mean age of T & CM users was younger compared to non- T & CM users (61 years vs. 66 years, p=0.04). Two-thirds (66%) of patients admitted to concurrent T & CM usage while attending conventional post stroke rehabilitation. Acupuncture (40.4%), massage (40.4%) and traditional Chinese medicine (11.5%) were the most common T & CM used. Positive perception was recorded in terms of ability of T & CM usage to relieve post stroke symptoms (68%), and it was safe to use because it was made from 'natural sources'. Negative perception recorded: T & CM caused significant adverse effects (57.6%) and was not safe to be used in combination with other conventional medicines (62.5%).
    CONCLUSIONS: Concurrent T & CM usage among post-stroke patients attending structured outpatient rehabilitation program is widely practised especially acupuncture, massage and traditional Chinese medicines. Overall the perception towards its use is favourable.
    Study site: Medical Rehabilitation Services Department, Perubatan Universiti Kebangsaan Malaysia (PPUKM), Kuala Lumpur, Malaysia
  14. A new approach of probe sonication assisted ionic liquid conversion of glucose, cellulose and biomass into 5-hydroxymethylfurfural
    Sarwono A, Man Z, Muhammad N, Khan AS, Hamzah WSW, Rahim AHA, et al.
    Ultrason Sonochem, 2017 Jul;37:310-319.
    PMID: 28427638 DOI: 10.1016/j.ultsonch.2017.01.028
    5-Hydroxymethylfurfural (HMF) has been identified as a promising biomass-derived platform chemical. In this study, one pot production of HMF was studied in ionic liquid (IL) under probe sonication technique. Compared with the conventional heating technique, the use of probe ultrasonic irradiation reduced the reaction time from hours to minutes. Glucose, cellulose and local bamboo, treated with ultrasonic, produced HMF in the yields of 43%, 31% and 13% respectively, within less than 10min. The influence of various parameters such as acoustic power, reaction time, catalysts and glucose loading were studied. About 40% HMF yield at glucose conversion above 90% could be obtained with 2% of catalyst in 3min. Negligible amount of soluble by-product was detected, and humin formation could be controlled by adjusting the different process parameters. Upon extraction of HMF, the mixture of ionic liquid and catalyst could be reused and exhibited no significant reduction of HMF yield over five successive runs. The purity of regenerated [C4C1im]Cl and HMF was confirmed by NMR spectroscopy, indicating neither changes in the chemical structure nor presence of any major contaminants during the conversion under ultrasonic treatment. 13C NMR suggests that [C4C1im]Cl/CrCl3 catalyses mutarotation of α-glucopyranose to β-glucopyranose leading to isomerization and finally conversion to HMF. The experimental results demonstrate that the use of probe sonication technique for conversion to HMF provides a positive process benefit.
  15. A review on geopolymers as emerging materials for the adsorption of heavy metals and dyes
    Siyal AA, Shamsuddin MR, Khan MI, Rabat NE, Zulfiqar M, Man Z, et al.
    J Environ Manage, 2018 Oct 15;224:327-339.
    PMID: 30056352 DOI: 10.1016/j.jenvman.2018.07.046
    The world water resources are contaminated due to discharge of a large number of pollutants from industrial and domestic sources. A variety of a single and multiple units of physical, chemical, and biological processes are employed for pollutants removal from wastewater. Adsorption is the most widely utilized process due to high efficiency, simple procedure and cost effectiveness. This paper reviews the research work carried out on the use of geopolymer materials for the adsorption of heavy metals and dyes. Geopolymers possess good surface properties, heterogeneous microstructure and amorphous structure. The performance of geopolymers in the removal of heavy metals and dyes is reported comparable to other materials. The pseudo-second order kinetics and Langmuir isotherm models mostly fit to the adsorption data suggesting homogeneous distribution of adsorption sites with the formation of monolayer adsorbate on the surface of geopolymers. Adsorption of heavy metals and dyes onto geopolymers is spontaneous, endothermic and entropy driven process. Future research should focus on the enhancement of geopolymer performance, testing on pollutants other than heavy metals and dyes, and verification on real wastewater in continuous operation.
  16. Recent progress in integrated fixed-film activated sludge process for wastewater treatment: A review
    Waqas S, Bilad MR, Man Z, Wibisono Y, Jaafar J, Indra Mahlia TM, et al.
    J Environ Manage, 2020 Aug 15;268:110718.
    PMID: 32510449 DOI: 10.1016/j.jenvman.2020.110718
    Integrated fixed-film activated sludge (IFAS) process is considered as one of the leading-edge processes that provides a sustainable solution for wastewater treatment. IFAS was introduced as an advancement of the moving bed biofilm reactor by integrating the attached and the suspended growth systems. IFAS offers advantages over the conventional activated sludge process such as reduced footprint, enhanced nutrient removal, complete nitrification, longer solids retention time and better removal of anthropogenic composites. IFAS has been recognized as an attractive option as stated from the results of many pilot and full scales studies. Generally, IFAS achieves >90% removals for combined chemical oxygen demand and ammonia, improves sludge settling properties and enhances operational stability. Recently developed IFAS reactors incorporate frameworks for either methane production, energy generation through algae, or microbial fuel cells. This review details the recent development in IFAS with the focus on the pilot and full-scale applications. The microbial community analyses of IFAS biofilm and floc are underlined along with the special emphasis on organics and nitrogen removals, as well as the future research perspectives.
  17. Fulltext [EMIM][Tf2N]-Modified Silica as Filler in Mixed Matrix Membrane for Carbon Dioxide Separation
    Shafie SNA, Md Nordin NAH, Bilad MR, Misdan N, Sazali N, Putra ZA, et al.
    Membranes (Basel), 2021 May 19;11(5).
    PMID: 34069683 DOI: 10.3390/membranes11050371
    This study focuses on the effect of modified silica fillers by [EMIN][Tf2N] via physical adsorption on the CO2 separation performance of a mixed matrix membrane (MMM). The IL-modified silica was successfully synthesized as the presence of fluorine element was observed in both Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectrometer (XPS) analyses. The prepared MMMs with different loadings of the IL-modified silica were then compared with an unmodified silica counterpart and neat membrane. The morphology of IL-modified MMMs was observed to have insignificant changes, while polymer chains of were found to be slightly more flexible compared to their counterpart. At 2 bar of operating pressure, a significant increase in performance was observed with the incorporation of 3 wt% Sil-IL fillers compared to that of pure polycarbonate (PC). The permeability increased from 353 to 1151 Barrer while the CO2/CH4 selectivity increased from 20 to 76. The aforementioned increment also exceeded the Robeson upper bound. This indicates that the incorporation of fillers surface-modified with ionic liquid in an organic membrane is worth exploring for CO2 separation.
Related Terms
    Try searching for something
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links