Displaying all 5 publications

Abstract:
Sort:
  1. Tay WH, Lau KK, Shariff AM
    Ultrason Sonochem, 2016 11;33:190-196.
    PMID: 27245970 DOI: 10.1016/j.ultsonch.2016.04.004
    Physical absorption process is always nullified by the presence of cavitation under low frequency ultrasonic irradiation. In the present study, high frequency ultrasonic of 1.7MHz was used for the physical absorption of CO2 in a water batch system under elevated pressure. The parameters including ultrasonic power and initial feed pressure for the system have been varied from 0 to 18W and 6 to 41bar, respectively. The mass transfer coefficient has been determined via the dynamic pressure-step method. Besides, the actual ultrasonic power that transmitted to the liquid was measured based on calorimetric method prior to the absorption study. Subsequently, desorption study was conducted as a comparison with the absorption process. The mechanism for the ultrasonic assisted absorption has also been discussed. Based on the results, the mass transfer coefficient has increased with the increasing of ultrasonic power. It means that, the presence of streaming effect and the formation of liquid fountain is more favorable under high frequency ultrasonic irradiation for the absorption process. Therefore, high frequency ultrasonic irradiation is suggested to be one of the potential alternatives for the gas separation process with its promising absorption enhancement and compact design.
  2. Abdul Latif AA, Lau KK, Low SC, Azeem B
    Membranes (Basel), 2021 Aug 26;11(9).
    PMID: 34564471 DOI: 10.3390/membranes11090654
    A spiral wound membrane (SWM) is employed to separate acid gases (mainly CO2) from natural gas due to its robustness, lower manufacturing cost, and moderate packing density compared to hollow fiber membranes. Various mathematical models are available to describe the separation performance of SWMs under different operating conditions. Nevertheless, most of the mathematical models deal with only binary gas mixtures (CO2 and CH4) that may lead to an inaccurate assessment of separation performance of multicomponent natural gas mixtures. This work is aimed to develop an SWM separation model for multicomponent natural gas mixtures. The succession stage method is employed to discretize the separation process within the multicomponent SWM module for evaluating the product purity, hydrocarbon loss, stage cut, and permeate acid gas composition. Our results suggest that multicomponent systems tend to generate higher product purity, lower hydrocarbon loss, and augmented permeate acid gas composition compared to the binary system. Furthermore, different multicomponent systems yield varied separation performances depending on the component of the acid gas. The developed multicomponent SWM separation model has the potential to design and optimize the spiral wound membrane system for industrial application.
  3. Zhalehrajabi E, Lau KK, Ku Shaari KZ, Zahraee SM, Seyedin SH, Azeem B, et al.
    Materials (Basel), 2019 Jul 20;12(14).
    PMID: 31330846 DOI: 10.3390/ma12142320
    Granulation is an important step during the production of urea granules. Most of the commercial binders used for granulation are toxic and non-biodegradable. In this study, a fully biodegradable and cost-effective starch-based binder is used for urea granulation in a fluidized bed granulator. The effect of binder properties such as viscosity, surface tension, contact angle, penetration time, and liquid bridge bonding force on granulation performance is studied. In addition, the effect of fluidized bed process parameters such as fluidizing air inlet velocity, air temperature, weight of primary urea particles, binder spray rate, and binder concentration is also evaluated using response surface methodology. Based on the results, binder with higher concentration demonstrates higher viscosity and higher penetration time that potentially enhance the granulation performance. The viscous Stokes number for binder with higher concentration is lower than critical Stokes number that increases coalescence rate. Higher viscosity and lower restitution coefficient of urea particles result in elastic losses and subsequent successful coalescence. Statistical analysis indicate that air velocity, air temperature, and weight of primary urea particles have major effects on granulation performance. Higher air velocity increases probability of collision, whereby lower temperature prevents binder to be dried up prior to collision. Findings of this study can be useful for process scale-up and industrial application.
  4. Jusoh N, Yeong YF, Mohamad M, Lau KK, M Shariff A
    Ultrason Sonochem, 2017 01;34:273-280.
    PMID: 27773246 DOI: 10.1016/j.ultsonch.2016.05.033
    Sonochemical-assisted method has been identified as one of the potential pre-treatment methods which could reduce the formation duration of zeolite as well as other microporous and mesoporous materials. In the present work, zeolite T was synthesized via sonochemical-assisted pre-treatment prior to hydrothermal growth. The durations for sonochemical-assisted pre-treatment were varied from 30min to 90min. Meanwhile, the hydrothermal growth durations were ranged from 0.5 to 3days. The physicochemical properties of the resulting samples were characterized using XRD, FESEM, FTIR and BET. As verified by XRD, the samples synthesized via hydrothermal growth durations of 1, 2 and 3days and sonochemical-assisted pre-treatment durations of 60min and 90min demonstrated zeolite T structure. The samples which underwent sonochemical-assisted pre-treatment duration of 60min yielded higher crystallinity with negligible change of zeolite T morphology. Overall, the lengthy synthesis duration of zeolite T has been successfully reduced from 7days to 1day by applying sonochemical-assisted pre-treatment of 60min, while synthesis duration of 0.5days via sonochemical-assisted pre-treatment of 60min was not sufficient to produce zeolite T structure.
  5. Toussaint ND, Pedagogos E, Lioufas NM, Elder GJ, Pascoe EM, Badve SV, et al.
    J Am Soc Nephrol, 2020 11;31(11):2653-2666.
    PMID: 32917784 DOI: 10.1681/ASN.2020040411
    BACKGROUND: Hyperphosphatemia is associated with increased fibroblast growth factor 23 (FGF23), arterial calcification, and cardiovascular mortality. Effects of phosphate-lowering medication on vascular calcification and arterial stiffness in CKD remain uncertain.

    METHODS: To assess the effects of non-calcium-based phosphate binders on intermediate cardiovascular markers, we conducted a multicenter, double-blind trial, randomizing 278 participants with stage 3b or 4 CKD and serum phosphate >1.00 mmol/L (3.10 mg/dl) to 500 mg lanthanum carbonate or matched placebo thrice daily for 96 weeks. We analyzed the primary outcome, carotid-femoral pulse wave velocity, using a linear mixed effects model for repeated measures. Secondary outcomes included abdominal aortic calcification and serum and urine markers of mineral metabolism.

    RESULTS: A total of 138 participants received lanthanum and 140 received placebo (mean age 63.1 years; 69% male, 64% White). Mean eGFR was 26.6 ml/min per 1.73 m2; 45% of participants had diabetes and 32% had cardiovascular disease. Mean serum phosphate was 1.25 mmol/L (3.87 mg/dl), mean pulse wave velocity was 10.8 m/s, and 81.3% had abdominal aortic calcification at baseline. At 96 weeks, pulse wave velocity did not differ significantly between groups, nor did abdominal aortic calcification, serum phosphate, parathyroid hormone, FGF23, and 24-hour urinary phosphate. Serious adverse events occurred in 63 (46%) participants prescribed lanthanum and 66 (47%) prescribed placebo. Although recruitment to target was not achieved, additional analysis suggested this was unlikely to have significantly affected the principle findings.

    CONCLUSIONS: In patients with stage 3b/4 CKD, treatment with lanthanum over 96 weeks did not affect arterial stiffness or aortic calcification compared with placebo. These findings do not support the role of intestinal phosphate binders to reduce cardiovascular risk in patients with CKD who have normophosphatemia.

    CLINICAL TRIAL REGISTRY NAME AND REGISTRATION NUMBER: Australian Clinical Trials Registry, ACTRN12610000650099.

Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links