Nanofibrillated cellulose (NFC) has found extensive potential and existing utilizations across various industries. Nonetheless, a notable constraint of NFC lies in its inherent hydrophilic nature, which restricts its suitability for non-aqueous application. This study aims at synthesising hydrophobic NFC through a two-step surface modification by reacting NFC with tannic acid and amine group. The study also investigated the effect of using various alkylamines on the properties of modified NFC. The hydrophobic NFC was characterized using various analytical techniques namely Thermogravimetric Analysis (TGA), X-Ray Diffraction analysis (XRD), Atomic Force Microscopy (AFM), Fourier Transform Infrared Spectroscopy (FTIR), elemental analysis, and contact angle measurements. The present study also looked into the possible use of modified NFC as a pharmaceutical excipient for the delivery of water insoluble curcumin. The analysis of curcumin binding onto the modified NFC was conducted using UV-Visible spectrophotometry. The findings from the study indicated that the modified NFC effectively bound a substantial quantity of curcumin (80 % - 87 %) and the binding varied for samples of different degree of substitution.
In this study, various chitosan-based films such as chitosan (C), chitosan-condensed tannin (CT), chitosan-casein (CC), and chitosan-casein-condensed tannin (CCT) films were prepared for the purpose of food packaging. In order to improve the hydrophobicity of these films, carnauba wax was blended into CCT to produce CCTW film. Properties such as morphology, UV resistance, water solubility, barrier performance, tensile strength, antioxidant, antibacterial and its performance as food packaging were evaluated. Compared with other chitosan-based films, CCTW films exhibited higher UV resistance, tensile strength, thermal stability and hydrophobicity. The addition of both condensed tannin and carnauba wax has significantly decreased the water vapor and oxygen permeability of the CCTW films. The CCTW films were proved capable of repelling most daily consuming liquids. Besides, CCTW films displayed outstanding free radical scavenging rate and antibacterial properties. Meanwhile, bananas wrapped with CCTW films remained fresh for seven days without any mold growth and outperformed other types of films. Apart from that, the CCTW films also showed biodegradable characteristics after exposure to Penicillium sp. These distinguished characteristics made the CCTW films a promising packaging material for long-term food storage.
The present study was conducted to examine the effects of sonication treatments (time intervals of 0, 15, 30, 45 and 60 min.) on phenolics and other antioxidant compounds in starfruits extracted in methanol and water. Overall, methanolic extracts exhibited significantly higher extractability, percentage inhibition of DPPH radicals, ferric reducing antioxidant property (FRAP) value, antioxidant capacity, flavonoids, total phenolics and tannins (p
Chitosan film reinforced with nano-sized chitin whiskers and crosslinked using tannic acid was synthesized by the casting-vaporation method. The mechanical and physicochemical properties of several film samples (consisting of different ratio of chitin and tannic acid) were compared with neat chitosan. Tensile tests show that the addition of chitin improves the nanocomposite films mechanical properties up to 137% compared to neat chitosan, but this is slightly degraded when tannic acid is introduced. However, tannic acid and chitin whisker content greatly reduced moisture content by 294% and water solubility by 13%. Transmission electron microscopy (TEM) and Fourier-transform-infrared spectroscopy (FTIR) were used to investigate the morphology and molecular interaction of film. X-ray diffraction results indicated that the samples with chitin whiskers had a more rigid structure. The addition of tannic acid changed the structure into an anhydrous crystalline conformation when compared to neat chitosan film.
A study was conducted to determine the effect of sugarcane maturation on the contents of chlorophyll, tannin, and polyphenol oxidase (PPO) activity and on color change of sugarcane juice. The maturation period of the cane studied was between 3 and 10 months after planting. Different parts of the cane, namely, the top, middle, and bottom portions, were analyzed. Results obtained indicated that there were significant (P < 0.01) decreases in total chlorophyll a and b and tannin contents during maturity followed by slower rates of decrease of both parameters at the end of maturity stages. There were no significant differences (P > 0.05) in chlorophyll and tannin contents between the middle and bottom portions. On the other hand, the top portion of the stem had a significantly (P < 0.01) lower concentration of chlorophyll and a significantly (P < 0.01) higher content of tannin. PPO activity of sugarcane juice was determined using chlorogenic acid as a substrate. There was a highly significant difference (P < 0.01) in PPO activity of cane juice during maturity. PPO activity was high at the early development stage, decreased during maturation, and then remained relatively constant at the end of maturity. PPO activity was higher when chlorogenic acid was used as substrate. There were also significant differences (P < 0.01) in juice color (L*, a*, b* values) from different portions at different maturity stages. At the early stages, the color of extracted juice was dark, and then the juice turned to yellowish green during maturity. The decrease in green color or the increase in the yellow color could be associated with the decline in chlorophyll. The overall color change (DeltaE) at maturity indicated that the color of the middle and bottom portions was lower than that of the top portion.
Effects of different types of solvent on the antioxidant and antibacterial activity of Quercus infectoria extract have not been well documented. Therefore, extraction process was conducted using conventional Soxhlet extraction with six different types of solvent (100% methanol, ethanol, acetone, water and 70% methanol, and ethanol). High performance liquid chromatography was implemented to identify gallic acid and tannic acid in the extracts. Water extracts contained the highest concentration of both gallic acid and tannic acid compared to other types of solvent; 51.14 mg/g sample and 1332.88 mg/g sample of gallic acid and tannic acid. Meanwhile, antioxidant and antibacterial activity were tested using DPPH free radicals scavenging and disc diffusion assay. Results demonstrated that water extracts gave the highest antioxidant activity (approximately 94.55%), while acetone extract gave the largest inhibition zone for disc diffusion assay (19.00mm respectively). The results also revealed rich sources of gallic acid and tannic acid in Q. infectoria which might provide a novel source of these natural antioxidant and antibacterial activity.
The aim of this study was to determine the suitability of tannin-added Rhizophora spp. particleboards as phantom materials in the application of low- and high-energy photons. The tannin-added Rhizophora spp. particleboards and density plug phantoms were created with a target density of 1.0 g/cm3. The elemental composition and effective atomic number of the particleboards were measured using energy dispersive X-ray analysis. The mass attenuation coefficient of the particleboards for low-energy photons were measured using the attenuation of X-ray fluorescence. The mass attenuation coefficients of high-energy photons were measured using the attenuation of 137Cs and 60Co gamma energies. The results were compared to the calculated value of water using XCOM calculations. The results showed that the effective atomic number and mass attenuation coefficients of tannin-added Rhizophora spp. particleboards were similar to those of water, indicating the suitability of tannin-added Rhizophora spp. particleboards as phantom materials for low- and high-energy photons.
Treated Rhizopora mucronata tannin (RMT) as a corrosion inhibitor for carbon steel and copper in oil and gas facilities was investigated. Corrosion rate of carbon-steel and copper in 3wt% NaCl solution by RMT was studied using chemical (weight loss method) and spectroscopic (FTIR) techniques at various temperatures in the ranges of 26-90°C. The weight loss data was compared to the electrochemical by the application of Faraday's law for the conversion of corrosion rate data from one system to another. The inhibitive efficiency of RMT was compared with commercial inhibitor sodium benzotriazole (BTA-S). The best concentration of RMT was 20% (w/v), increase in concentration of RMT decreased the corrosion rate and increased the inhibitive efficiency. Increase in temperature increased the corrosion rate and decreased the inhibitive efficiency but, the rate of corrosion was mild with RMT. The FTIR result shows the presence of hydroxyl group, aromatic group, esters and the substituted benzene group indicating the purity of the tannin. The trend of RMT was similar to that of BTA-S, but its inhibitive efficiency for carbon-steel was poor (6%) compared to RMT (59%). BTA-S was efficient for copper (76%) compared to RMT (74%) at 40% (w/v) and 20% (w/v) concentration respectively. RMT was efficient even at low concentration therefore, the use of RMT as a cost effective and environmentally friendly corrosion inhibiting agent for carbon steel and copper is herein proposed.
The red sword bean (Canavalia gladiata) is an underutilized edible bean cultivated in China. It was previously found to have the highest content of antioxidant polyphenols among 42 edible beans, mainly gallic acid, and gallotannins in its red bean coat, an apparently unique characteristic among edible beans. In this study, the main phenolic compounds in red sword bean coats were further separated by Sephadex LH-20 column chromatography, and identified by LC-MS/MS. Furthermore, the FRAP and ABTS antioxidant activities and antibacterial activity (diameter of inhibition zone, DIZ) of main gallotannin-rich fractions were tested. Our results showed that gallotannins of red sword bean coats were mainly comprised of monogalloyl to hexagalloyl hexosides. Interestingly, tetragalloyl, pentagalloyl, and hexagalloyl hexosides were identified as the possible candidates responsible for the red color of the coats. On the other hand, gallotannin-rich fractions exhibited diverse antioxidant and antibacterial activities, and tetragalloyl hexoside overall had the highest free radical scavenging and antibacterial activities. The degree of galloylation did not completely explain the structure-function relationship of gallotannins isolated from red sword bean coats, as there should exist other factors affecting their bioactivities. In conclusion, red sword bean coats are excellent natural sources of gallotannins, and their gallotannin-rich extracts can be utilized as natural antioxidant and antibacterial agents with potential health benefits as well as application in food industry.
Condensed tannin was solidified onto chitosan microspheres to prepare chitosan-tannin (CT) composite microspheres with a simple preparation method to study its performance in adsorbing copper (Cu2+) and lead ions (Pb2+) in aqueous media. The study investigated the influence of the mass ratio of tannin and chitosan, pH value, adsorption time, and initial concentrations of Cu2+ and Pb2+ on the adsorption capacity of Cu2+ and Pb2+ ions. Additionally, the study examined the adsorption isotherms and kinetics of Cu2+ and Pb2+ on CT composite microspheres. The adsorption process aligns more closely with the fitting results of the Langmuir model. The maximum capacity for saturated monolayer adsorption of CT composite microspheres for Cu2+ and Pb2+ was 37.6 and 52.9 mg/g, respectively. The adsorption process of CT composite microspheres for Cu2+ and Pb2+ was primarily driven by single-layer chemical adsorption. In addition, metal ions adsorbed onto CT composite microspheres can be released by treating them with a dilute solution of strong acid. Furthermore, the CT composite microspheres exhibited impressive removal efficiencies of 82 % and 95 % for Cu2+ and Pb2+ respectively, even at low concentrations of 2 mg/L. The CT composite microspheres have the ability to easily separate the adsorbed Cu2+ and Pb2+ ions.
Oil palm mesocarp fiber was subjected to hydrothermal pretreatment under isothermal and non-isothermal conditions. The pretreated slurries were separated by filtration, pretreated liquids and solids were characterized. An enzymatic digestibility study was performed for both pretreated slurries and solids to understand the effect of soluble inhibitors generated during the pretreatment process. The highest glucose yield obtained from pretreated slurries was 70.1%, and gradually decreased with higher pretreatment severities. The highest glucose yield obtained in pretreated solids was 100%, after pretreatment at 210°C for 20min. In order to study the inhibitory effects of compounds generated during pretreatment with cellulase, technical grade solutions that mimic the pretreated liquid were prepared and their effect on Acremonium cellulase activity was monitored using Avicel. Xylo-oligomers and tannic acid were identified as powerful inhibitors of Acremonium cellulase, and the lowest hydrolysis rate of Avicel of 0.18g/g-glucose released/L/h was obtained from tannic acid.
In order to meet the growing demand for adsorbents to treat wastewater effectively, there has been increased interest in using sustainable biomass feedstocks. In this present study, the dermal tissue of oil palm frond was pyrolyzed with superheated steam at 500 °C to produce nanoporous biochar as bioadsorbent. The effect of operating conditions was investigated to understand the adsorption mechanism and to enhance the adsorption of phenol and tannic acid. The biochar had a microporous structure with a Brunauer-Emmett-Teller surface area of 422 m2/g containing low polar groups. The adsorption capacity of 62.89 mg/g for phenol and 67.41 mg/g for tannic acid were obtained using 3 g/L biochar dosage after 8 h of treatment at solution pH of 6.5 and temperature of 45 °C. The Freundlich model had the best fit to the isotherm data of phenol (R2 of 0.9863), while the Langmuir model best elucidated the isotherm data of tannic acid (R2 of 0.9632). These indicated that the biochar-phenol interface was associated with a heterogeneous multilayer sorption mechanism, while the biochar-tannic acid interface had a nonspecific monolayer sorption mechanism. The residual concentration of 26.3 mg/L phenol and 23.1 mg/L tannic acid was achieved when treated from 260 mg/L three times consecutively with 1 g/L biochar dosage, compared to a reduction to 72.3 mg/L phenol and 69.9 mg/L tannic acid using 3 g/L biochar dosage in a single treatment. The biochar exhibited effective adsorption of phenol and tannic acid, making it possible to treat effluents that contain varieties of phenolic compounds.
Cancer is a devastating disease that has claimed many lives. Natural bioactive agents from plants are gaining wide attention for their anticancer activities. Several studies have found that natural plant-based bioactive compounds can enhance the efficacy of chemotherapy, and in some cases ameliorate some of the side-effects of drugs used as chemotherapeutic agents. In this paper, we have reviewed the literature on the anticancer effects of four plant-based bioactive compounds namely, curcumin, myricetin, geraniin and tocotrienols (T3) to provide an overview on some of the key findings that are related to this effect. The molecular mechanisms through which the active compounds may exert their anticancer properties in cell and animal-based studies also discussed.
Geraniin (GE), an ellagitannin (ET) renowned for its promising health advantages, faces challenges in its practical applications due to its limited bioavailability. This innovative and novel formulation of GE and soy-phosphatidylcholine (GE-PL) complex has the potential to increase oral bioavailability, exhibiting high entrapment efficiency of 100.2 ± 0.8 %, and complexation efficiency of 94.6 ± 1.1 %. The small particle size (1.04 ± 0.11 μm), low polydispersity index (0.26 ± 0.02), and adequate zeta potential (-26.1 ± 0.12 mV), indicate its uniformity and stability. Moreover, the formulation also demonstrates improved lipophilicity, reduced aqueous and buffer solubilities, and better partition coefficient. It has been validated by various analytical techniques, including Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) studies. Oral bioavailability and pharmacokinetics of free GE and GE-PL complex investigated in rabbits demonstrated enhanced plasma concentration of ellagic acid (EA) compared to free GE. Significantly, GE, whether in its free form or as part of the GE-PL complex, was not found in the circulatory system. However, EA levels were observed at 0.5 h after administration, displaying two distinct peaks at 2 ± 0.03 h (T1max) and 24 ± 0.06 h (T2max). These peaks corresponded to peak plasma concentrations (C1max and C2max) of 588.82 ng/mL and 711.13 ng/mL respectively, signifying substantial 11-fold and 5-fold enhancements when compared to free GE. Additionally, it showed an increased area under the curve (AUC), the elimination half-life (t1/2, el) and the elimination rate constant (Kel). The formulation of the GE-PL complex prolonged the presence of EA in the bloodstream and improved its absorption, ultimately leading to a higher oral bioavailability. In summary, the study highlights the significance of the GE-PL complex in overcoming the bioavailability limitations of GE, paving the way for enhanced therapeutic outcomes and potential applications in drug delivery and healthcare.
Tannic acid (TA) is a water-soluble polyphenol and used in beverages, medical fields as clarifying and additive agents. In daily life, TA is unavoidable, and excessive consumption of tannin containing foods can harm health. Thus, rapid and sensitive quantification is highly necessary. Herein, an eco-friendly fluorometric and electrochemical sensing of TA was developed based on a dysprosium(III)-metal-organic framework (Dy(III)-MOF). An aqueous dispersion of Dy(III)-MOF exhibits strong dual emissions at 479 and 572 nm with an excitation at 272 nm, due to the 4f-4f electronic transition and "antenna effect". Chromophore site of the functional ligand, and Dy(III) ion could potentially serve as a sensing probe for TA via quenching (fluorescence). The fluorometric sensor worked well in a wide linear range concentrations from 0.02 to 25 μM with a limit of detection (LOD) of 0.0053 μM. Secondly, the cyclic voltammetric of TA at Dy(III)-MOF modified screen-printed carbon electrode (SPCE) has been investigated. The Dy(III)-MOF/SPCE showed an anodic peak signal at +0.22 V with a five-fold stronger current than the control electrode surface. Under optimized sensing parameters, the Dy(III)-MOF/SPCE delivered wide linear concentrations from 0.01 to 200 μM with a LOD of 0.0023 μM (S/N = 3). Accessibility of real practical samples in alcoholic and juice-based beverages were quantified, resulting in superior recovery rates (98.13-99.53%), F-test, and t-test confirmed high reliability (<95% confidence level (n = 3)). Finally, practicability result of the electrochemical method was validated by fluorometric with a relative standard deviation (RSD) of 0.18-0.46 ± 0.17% (n = 3). The designed probe has proven to be a key candidate for the accurate analysis of TA in beverage samples to ensure food quality.
Restriction of antibiotic growth promoters (AGP) in Indonesia reduces broiler production due to bacterial diseases. Some poultry farmers have attempted to replace AGP with phytogenic compounds, such as tannin as an in-feed additive. Therefore, this study was carried out to investigate the effects of tannin administration on the production performance, viscera weight, and lipoprotein levels of tropically-raised broiler chickens. Cobb Strain broiler chicks aged one day were used in an experiment with a completely random design, three treatments, and four replicate pens, each containing nine birds. Three dietary treatments were assigned to the birds: basal diet (negative control), basal diet+0.03% Zn Bacitracyn (positive control), and basal diet+0.05% tannin for the starter phase of 1-21 days and the grower phase of 22-42 days, respectively. Tannin supplementation significantly increased the feed conversion ratio in all phases relative to the control group. Tannin supplementation in the diet significantly reduced daily feed intake during the grower phase, final body weight, carcass weight, intestine weight, liver weight, and total visceral weight, compared to the control group. Tannin had lower levels of aspartate aminotransferase but higher levels of low-density lipoprotein and alanine aminotransferase. Tannin addition in broiler diets might not improve growth performance and health. Therefore, it is not suggested as a substitute for AGPs in broiler diets.
The galloylated cyanogenic glucosides based on prunasin (1-7), gallotannins (8-14), ellagitannins (15-17), ellagic acid derivatives (18, 19) and gallic acid (20) isolated from the leaves of Phyllagathis rotundifolia (Melastomataceae) were investigated for their neuroprotective activity against hydrogen peroxide (H(2)O(2))-induced oxidative damage in NG108-15 hybridoma cell line. Among these compounds, the gallotannins and ellagitannins exhibited remarkable neuroprotective activities against oxidative damage in vitro as compared to galloylated cyanogenic glucosides and ellagic acid derivatives in a dose-dependent manner. They could be explored further as potential natural neuroprotectors in various remedies of neurodegenerative diseases.
Natural products play a vital role in the discovery of leads for novel pharmacologically active drugs. Geraniin (GE) was identified as the major compound in the rind of Nephelium lappaceum L. (Sapindaceae), while ellagic and gallic acids have been shown to be its main metabolites. GE and its metabolites possess a range of bioactive properties including being an anti-infective, anticarcinogenic, antihyperglycemic, and antihypertensive.
Tannins are increasingly recognized as dietary carcinogens and as antinutrients interfering with the system's full use of protein. Nevertheless, certain tannin-rich beverages, masticatories, and folk remedies, long utilized in African, Asiatic, Pacific, and Latin American countries, are now appearing in North American sundry shops and grocery stores. These include guarana (Paullinia cupana HBK.) from Brazil, kola nut (Cola nitida Schott & Endl. and C. acuminata Schott & Endl.) from West Africa, and betel nut (Areca catechu L.) from Malaya. The betel nut, or arecanut, has long been associated with oral and esophageal cancer because of its tannin content and the tannin contributed by the highly astringent cutch from Acacia catechu L. and Uncaria gambir Roxb. and the aromatic, astringent 'pan' (leaves of Piper betel L.) chewed with it. In addition to the constant recreational/social ingestion of these plant materials, they are much consumed as aphrodisiacs and medications. Guarana and kola nut enjoy great popularity in their native lands because they are also rich in caffeine, which serves as a stimulant. Research and popular education on the deleterious effects of excessive tannin intake could do much to reduce the heavy burden of early mortality and health care, especially in developing countries.