MyMedR

Displaying all 6 publications

Abstract:

Sort:

Fulltext SEM-PLS analysis of inhibiting factors of cost performance for large construction projects in Malaysia: perspective of clients and consultants

Memon AH, Rahman IA

ScientificWorldJournal, 2014;2014:165158.
PMID: 24693227 DOI: 10.1155/2014/165158

This study uncovered inhibiting factors to cost performance in large construction projects of Malaysia. Questionnaire survey was conducted among clients and consultants involved in large construction projects. In the questionnaire, a total of 35 inhibiting factors grouped in 7 categories were presented to the respondents for rating significant level of each factor. A total of 300 questionnaire forms were distributed. Only 144 completed sets were received and analysed using advanced multivariate statistical software of Structural Equation Modelling (SmartPLS v2). The analysis involved three iteration processes where several of the factors were deleted in order to make the model acceptable. The result of the analysis found that R(2) value of the model is 0.422 which indicates that the developed model has a substantial impact on cost performance. Based on the final form of the model, contractor's site management category is the most prominent in exhibiting effect on cost performance of large construction projects. This finding is validated using advanced techniques of power analysis. This vigorous multivariate analysis has explicitly found the significant category which consists of several causative factors to poor cost performance in large construction projects. This will benefit all parties involved in construction projects for controlling cost overrun.

Matched MeSH terms: Construction Industry/statistics & numerical data*
Coercive pressure as a moderator of organizational structure and risk management: Empirical evidence from Malaysian construction industry

Tagod M, Adeleke AQ, Moshood TD

J Safety Res, 2021 06;77:139-150.
PMID: 34092304 DOI: 10.1016/j.jsr.2021.02.011

INTRODUCTION: The construction industry in Malaysia has been bedevilled by myriads of risk issues that have hampered its smooth operations in recent times. This paper is an empirical assessment that aims to examine the effect of coercive pressure on the relationship between organizational structure and construction risk management among construction industry in Malaysia.
METHOD: Based on the proposed model, a quantitative method was employed to obtain data from G7 construction industry operating within the peninsular Malaysia. Out of the 180 copies of questionnaire, 165 copies were properly filled, returned, and used for the analysis. PLS-SEM was used to analyze the obtained data.
RESULTS: The findings of the study affirmed that specialization, centralization, and management of risk by the construction industry had positive correlation.
CONCLUSIONS: As anticipated, coercive pressure had positive moderating correlation with both formalization and the management of risk by the construction industry. Similarly, it was also found that in the course of carrying out construction activities, coercive pressure made significant interactive influence on formalization, specialization, and centralization. Practical Applications: Coercive pressure reduced the frequency of accidents among workers in the process of carrying out construction works.

Matched MeSH terms: Construction Industry/statistics & numerical data
Construction and demolition waste generation rates for high-rise buildings in Malaysia

Mah CM, Fujiwara T, Ho CS

Waste Manag Res, 2016 Dec;34(12):1224-1230.
PMID: 27637272

Construction and demolition waste continues to sharply increase in step with the economic growth of less developed countries. Though the construction industry is large, it is composed of small firms with individual waste management practices, often leading to the deleterious environmental outcomes. Quantifying construction and demolition waste generation allows policy makers and stakeholders to understand the true internal and external costs of construction, providing a necessary foundation for waste management planning that may overcome deleterious environmental outcomes and may be both economically and environmentally optimal. This study offers a theoretical method for estimating the construction and demolition project waste generation rate by utilising available data, including waste disposal truck size and number, and waste volume and composition. This method is proposed as a less burdensome and more broadly applicable alternative, in contrast to waste estimation by on-site hand sorting and weighing. The developed method is applied to 11 projects across Malaysia as the case study. This study quantifies waste generation rate and illustrates the construction method in influencing the waste generation rate, estimating that the conventional construction method has a waste generation rate of 9.88 t 100 m(-2), the mixed-construction method has a waste generation rate of 3.29 t 100 m(-2), and demolition projects have a waste generation rate of 104.28 t 100 m(-2).

Matched MeSH terms: Construction Industry/statistics & numerical data*
Fulltext Workplace fatalities in Brunei Darussalam

Win KN, Trivedi A, Lai AS

Ind Health, 2018 Nov 21;56(6):566-571.
PMID: 29973468 DOI: 10.2486/indhealth.2018-0053

In 2012, there were about 2.3 million deaths worldwide attributed to work. The highest workplace fatality rate (WFR) was reported on construction sites due to high risk activities. Globally, fall from height is the leading cause of fatal injuries for construction workers. The objectives are to determine Brunei Darussalam's demographic distribution of occupational fatality; identify causal agents and industry where occupational fatalities commonly occur; and determine WFR by year. This cross-sectional study retrospectively reviewed records of occupational fatality which were notified to the Occupational Health Division, Ministry of Health, from January 2012 until December 2016. Notified occupational fatalities in Brunei over a five-year period was 50. Most of the cases were in 31-40 age group. 38% of fatality cases occurred in Indonesian workers. 60% were from the Construction industry. 38% were due to fall from height. WFR averaged 5.28 and the highest industry-specific fatality rate was seen in the Construction industry, ranging from 27.94 to 56.45 per 100,000 workers. WFR for Brunei Darussalam from 2012 to 2016 was similar to that of Malaysia, but higher than Singapore and the UK. Industry-specific fatality rate for the Construction and Manufacturing industries were higher than those of Singapore and the UK.

Matched MeSH terms: Construction Industry/statistics & numerical data
Accidents in Malaysian construction industry: statistical data and court cases

Chong HY, Low TS

Int J Occup Saf Ergon, 2014;20(3):503-13.
PMID: 25189753

Safety and health issues remain critical to the construction industry due to its working environment and the complexity of working practises. This research attempts to adopt 2 research approaches using statistical data and court cases to address and identify the causes and behavior underlying construction safety and health issues in Malaysia. Factual data on the period of 2000-2009 were retrieved to identify the causes and agents that contributed to health issues. Moreover, court cases were tabulated and analyzed to identify legal patterns of parties involved in construction site accidents. Approaches of this research produced consistent results and highlighted a significant reduction in the rate of accidents per construction project in Malaysia.

Matched MeSH terms: Construction Industry/statistics & numerical data*
Fulltext Fatal occupational injuries among non-governmental employees in Malaysia

Abas AB, Mohd Said DA, Aziz Mohammed MA, Sathiakumar N

Am. J. Ind. Med., 2013 Jan;56(1):65-76.
PMID: 22544443 DOI: 10.1002/ajim.22056

BACKGROUND: In Malaysia, surveillance of fatal occupational injuries is fragmented. We therefore analyzed an alternative data source from Malaysia's Social Security organization, the Pertubuhan Keselamatan Sosial (PERKESO).
METHODS: We conducted a secondary data analysis of the PERKESO database comprised of 7 million employees from 2002 to 2006.
RESULTS: Overall, the average annual incidence was 9.2 fatal occupational injuries per 100,000 workers. During the 5-year period, there was a decrease in the absolute number of fatal injuries by 16% and the incidence by 34%. The transportation sector reported the highest incidence of fatal injuries (35.1/100,000), followed by agriculture (30.5/100,000) and construction (19.3/100,000) sectors. Persons of Indian ethnicity were more likely to sustain fatal injuries compared to other ethnic groups.
CONCLUSIONS: Government and industry should develop rigorous strategies to detect hazards in the workplace, especially in sectors that continuously record high injury rates. Targeted interventions emphasizing worker empowerment coupled with systematic monitoring and evaluation is critical to ensure success in prevention and control measures.

Matched MeSH terms: Construction Industry/statistics & numerical data*