Displaying all 3 publications

Abstract:
Sort:
  1. Tajudin SM, Namito Y, Sanami T, Hirayama H
    Radiat Prot Dosimetry, 2020 Jul 02;188(4):486-492.
    PMID: 31950186 DOI: 10.1093/rpd/ncz308
    As a reference photon field, several radionuclides have been used frequently, such as 241Am,137Cs and60 Co for calibration. These nuclides provide mono-energy photons for dosemeters covering few tens of keV-MeV. The main energy around 200 keV is important for both environmental and medical fields since the former should consider scattering photons and the later should measure photons from X-ray generator. In our previous work, a backscattered layout can provide a uniform photon field spectra and dose rate with an energy of 190 keV by using an affordable intensity 137 Cs gamma source. Several other quasi-monoenergetic photon fields in the range of 100-200 keV could be obtained by using several available gamma sources. Two calibrated environmental CsI(Tl) survey meters, Horiba PA-1000 and Mr. Gamma A2700, had been measured with the developed backscattered photon field to understand energy-dependent features in order to confirm dosemeter readings. Consequently, both scintillator instruments are sensitive for measurements of the relatively low dose rates at 190 keV.
  2. Tajudin SM, Namito Y, Sanami T, Hirayama H
    Appl Radiat Isot, 2020 May;159:109086.
    PMID: 32250760 DOI: 10.1016/j.apradiso.2020.109086
    In this study, we developed a method for directly determining the energy deposited over the entire energy range by monitoring the light output from a plastic scintillator under gamma irradiation. The relative light output was analyzed based on Birks' semi-empirical formula for ionization to obtain the quenching parameter as kB = 0.016 ± 0.0004 g cm-2 MeV-1. Comparisons of experimental and calculated results for the light output spectra showed that considering the quenching effect, background subtraction, source casing, and energy sampling were essential for achieving good agreement.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links