MyMedR

Displaying all 7 publications

Abstract:

Sort:

Fulltext Hepatocellular carcinoma with disseminated skeletal muscle metastasis

Rahim EA, Noh MS, Ngah NA, Suraini MS, Yusof MM

Acta Radiol Open, 2017 Jul;6(7):2058460117716705.
PMID: 28811928 DOI: 10.1177/2058460117716705

Hepatocellular carcinoma (HCC) is the commonest primary tumor of the liver and carries a poor prognosis when diagnosed late or left untreated. Treatment relies heavily on the stage of the tumor when diagnosed. Extrahepatic metastasis is known to occur; these are mainly reported via autopsy studies or isolated case reports. Knowledge of extrahepatic metastasis is crucial in order to avoid unnecessary surgery. We report a rare case of a patient at our center, diagnosed to have HCC, who underwent treatment successfully, only to come back with extrahepatic metastasis to the skeletal muscles.
Bovine serum albumin: survival and osmolarity effect in bovine spermatozoa stored above freezing point

Nang CF, Osman K, Budin SB, Ismail MI, Jaffar FH, Mohamad SF, et al.

Andrologia, 2012 May;44 Suppl 1:447-53.
PMID: 21806660 DOI: 10.1111/j.1439-0272.2011.01203.x

Liquid nitrogen preservation in remote farms is a limitation. The goal of this study was to determine optimum temperature above freezing point for bovine spermatozoa preservation using bovine serum albumin (BSA) as a supplementation. Pooled semen sample from three ejaculates was subjected to various BSA concentration (1, 4, 8 and 12 mg ml(-1)), before incubation in different above freezing point temperatures (4, 25 and 37 °C). Viability assessment was carried out against time from day 0 (fresh sample) until all spermatozoa become nonviable. Optimal condition for bovine spermatozoa storage was at 4 °C with 1 mg ml(-1) BSA for almost 7 days. BSA improved bovine spermatozoa viability declining rate to 44.28% at day 4 and 57.59% at day 7 compared to control, with 80.54% and 98.57% at day 4 and 7 respectively. Increase in BSA concentration did not improve sperm viability. Our results also confirmed that there was a strong negative correlation between media osmolarity and bovine spermatozoa survival rate with r = 0.885, P < 0.0001. Bovine serum albumin helps to improve survival rate of bovine spermatozoa stored above freezing point.
Fulltext Effect of Cellulose Nanofibrils on the Properties of Jatropha Oil-Based Waterborne Polyurethane Nanocomposite Film

Amri MR, Guan CT, Osman Al-Edrus SS, Md Yasin F, Mohamad SF

Polymers (Basel), 2021 Apr 30;13(9).
PMID: 33946517 DOI: 10.3390/polym13091460

The objective of this work was to study the influence of cellulose nanofibrils (CNF) on the physical, mechanical, and thermal properties of Jatropha oil-based waterborne polyurethane (WBPU) nanocomposite films. The polyol to produce polyurethane was synthesized from crude Jatropha oil through epoxidation and ring-opening method. The chain extender, 1,6-hexanediol, was used to improve film elasticity by 0.1, 0.25, and 0.5 wt.% of CNF loading was incorporated to enhance film performance. Mechanical performance was studied using a universal test machine as specified in ASTM D638-03 Type V and was achieved by 0.18 MPa at 0.5 wt.% of CNF. Thermal gravimetric analysis (TGA) was performed to measure the temperature of degradation and the chemical crosslinking and film morphology were studied using Fourier-transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FESEM). The results showed that when the CNF was incorporated, it was found to enhance the nanocomposite film, in particular its mechanical and thermal properties supported by morphology. Nanocomposite film with 0.5 wt.% of CNF showed the highest improvement in terms of tensile strength, Young's modulus, and thermal degradation. Although the contact angle decreases as the CNF content increases, the effect on the water absorption of the film was found to be relatively small (<3.5%). The difference between the neat WPBU and the highest CNF loading film was not more than 1%, even after 5 days of being immersed in water.
Application of experimental designs and response surface methods in screening and optimization of reverse micellar extraction

Sy Mohamad SF, Mohd Said F, Abdul Munaim MS, Mohamad S, Azizi Wan Sulaiman WM

Crit Rev Biotechnol, 2020 May;40(3):341-356.
PMID: 31931631 DOI: 10.1080/07388551.2020.1712321

Reverse micellar extraction (RME) has emerged as a versatile and efficient tool for downstream processing (DSP) of various biomolecules, including structural proteins and enzymes, due to the substantial advantages over conventional DSP methods. However, the RME system is a complex dependency of several parameters that influences the overall selectivity and performance of the RME system, hence this justifies the need for optimization to obtain higher possible extraction results. For the last two decades, many experimental design strategies for screening and optimization of RME have been described in literature. The objective of this article is to review the use of different experimental designs and response surface methodologies that are currently used to screen and optimize the RME system for various types of biomolecules. Overall, this review provides the rationale for the selection of appropriate screening or optimization techniques for the parameters associated with both forward and backward extraction during the RME of biomolecules.
Fulltext Ternary Nanocomposite System Composing of Graphene Nanoplatelet, Cellulose Nanofiber and Jatropha Oil Based Waterborne Polyurethane: Characterizations, Mechanical, Thermal Properties and Conductivity

Amri MR, Md Yasin F, Abdullah LC, Al-Edrus SSO, Mohamad SF

Polymers (Basel), 2021 Oct 29;13(21).
PMID: 34771296 DOI: 10.3390/polym13213740

This work aims to evaluate the performance of graphene nanoplatelet (GNP) as conductive filler with the presence of 0.5 wt.% cellulose nanofiber (CNF) on the physical, mechanical, conductivity and thermal properties of jatropha oil based waterborne polyurethane. Polyurethane was made from crude jatropha oil using an epoxidation and ring-opening process. 0.5, 1.0, 1.5, 2.0 wt.% GNP and 0.5 wt.% CNF were incorporated using casting method to enhance film performance. Mechanical properties were studied following standard method as stated in ASTM D638-03 Type V. Thermal stability of the nanocomposite system was studied using thermal gravimetric analysis (TGA). Filler interaction and chemical crosslinking was monitored using Fourier-transform infrared spectroscopy (FTIR) and film morphology were observed with field emission scanning electron microscopy (FESEM). Water uptake analysis, water contact angle and conductivity tests are also carried out. The results showed that when the GNP was incorporated at fixed CNF content, it was found to enhance the nanocomposite film, its mechanical, thermal and water behavior properties as supported by morphology and water uptake. Nanocomposite film with 0.5 wt.% GNP shows the highest improvement in term of tensile strength, Young's modulus, thermal degradation and water behavior. As the GNP loading increases, water uptake of the nanocomposite film was found relatively small (<1%). Contact angle test also indicates that the film is hydrophobic with addition of GNP. The conductivity properties of the nanocomposite film were not enhanced due to electrostatic repulsion force between GNP sheet and hard segment of WBPU. Overall, with addition of GNP, mechanical and thermal properties was greatly enhanced. However, conductivity value was not enhanced as expected due to electrostatic repulsion force. Therefore, ternary nanocomposite system is a suitable candidate for coating application.
Fulltext Cardiac and Metabolic Effects of Bariatric Surgery Among Obese Patients in a Malaysian Tertiary Hospital: A 6-month Prospective Cohort Study

Roslan MH, Raffali MA, Mohamad SF, Nik Mahmood NRK, Che Hassan HH

J ASEAN Fed Endocr Soc, 2023;38(2):94-100.
PMID: 38045657 DOI: 10.15605/jafes.038.02.23

OBJECTIVE: Obesity is known to be associated with left ventricular diastolic dysfunction due to its effect on blood pressure and glucose tolerance. We aimed to investigate whether weight loss after bariatric surgery might improve diastolic dysfunction through in-depth echocardiographic examination.
METHODOLOGY: We recruited twenty-eight patients who were about to undergo bariatric surgery by purposive sampling. They underwent echocardiography at baseline and 6 months after surgery with a focus on diastolic function measurements and global longitudinal strain (GLS). They also had fasting serum lipid and glucose measurements pre- and post-surgery.
RESULTS: The mean weight loss after surgery was 24.1 kg. Out of the 28 subjects, fifteen (54%) initially had diastolic dysfunction before surgery. Only two had persistent diastolic dysfunction 6 months after surgery. The mean indexed left atrial volume 6 months post-surgery was 27.1 from 32 ml/m2 prior to surgery. The average E/e' is 11.78 post-surgery from 13.43 pre-surgery. The left ventricular GLS became (-)25.7% after surgery from (-)21.2% prior to surgery. Their post-surgery fasting serum lipid and glucose levels also showed significant improvement.
CONCLUSION: Our study reinforced the existing evidence that bariatric surgery significantly improved echocardiographic parameters of diastolic function and left ventricular global longitudinal strain, along with various metabolic profiles.
Surface Modified Nanocellulose and Its Reinforcement in Natural Rubber Matrix Nanocomposites: A Review

Hakimi NMF, Lee SH, Lum WC, Mohamad SF, Osman Al Edrus SS, Park BD, et al.

Polymers (Basel), 2021 Sep 24;13(19).
PMID: 34641056 DOI: 10.3390/polym13193241

Natural rubber is of significant economic importance owing to its excellent resilience, elasticity, abrasion and impact resistance. Despite that, natural rubber has been identified with some drawbacks such as low modulus and strength and therefore opens up the opportunity for adding a reinforcing agent. Apart from the conventional fillers such as silica, carbon black and lignocellulosic fibers, nanocellulose is also one of the ideal candidates. Nanocellulose is a promising filler with many excellent properties such as renewability, biocompatibility, non-toxicity, reactive surface, low density, high specific surface area, high tensile and elastic modulus. However, it has some limitations in hydrophobicity, solubility and compatibility and therefore it is very difficult to achieve good dispersion and interfacial properties with the natural rubber matrix. Surface modification is often carried out to enhance the interfacial compatibilities between nanocellulose and natural rubber and to alleviate difficulties in dispersing them in polar solvents or polymers. This paper aims to highlight the different surface modification methods employed by several researchers in modifying nanocellulose and its reinforcement effects in the natural rubber matrix. The mechanism of the different surface medication methods has been discussed. The review also lists out the conventional filler that had been used as reinforcing agent for natural rubber. The challenges and future prospective has also been concluded in the last part of this review.