Aim and Objectives: To detect the presence of micronuclei in exfoliated buccal mucosal cells of mobile phone users as well as to carry out a quantitative analysis of micronuclei in exfoliated buccal mucosal cells of mobile phone users.
Material and Methods: A cross-sectional study was carried out in 100 individuals, out of which 50 were included under the test group and 50 under the control group. Buccal mucosal smears were obtained from each subject. Staining was done using papanicuolau (PAP) stain and the slides were examined for the presence of micronuclei.
Results: The mean duration of mobile phone usage in years was 5.32 years for the exposed and 2.42 years for the control. Mean duration of mobile phone usage per day in the test group was 94.8 min and 12.4 min in the control group. The frequency of micronucleated cells (MNC) in test and control groups ranged from 0 to 16 and 0 to 2 respectively. The data obtained were statistically analyzed using Student t-test and significant results were obtained at 0.0001 level.
Conclusion: Our study concluded that there is an increased frequency of micronuclei in mobile phone users which is related to carcinogenesis.
Aim and Objectives: The aim of this study was to evaluate the flexural strength of a high-impact PMMA denture base resin material and flexural strength of a commonly available heat cure PMMA denture base material with Kevlar, glass, and nylon fibers.
Materials and Methods: The test samples were studied under two groups. The Group I (control group) comprised pre-reinforced PMMA (Lucitone 199; Dentsply Sirona Prosthetics, York, Pennsylvania, USA) consisting of 12 samples and second group comprised regular PMMA (DPI, Mumbai, India) reinforced with different fibers. The second test group was further divided into three subgroups as Group 2, Group 3, and Group 4 comprising 12 samples each designated by the letters a-l. All the samples were marked on both ends. A total of 48 samples were tested. Results were analyzed and any P value ≤0.05 was considered as statistically significant (t test).
Results: All the 48 specimens were subjected to a 3-point bending test on a universal testing machine (MultiTest 10-i, Sterling, VA, USA) at a cross-head rate of 2 mm/min. A load was applied on each specimen by a centrally located rod until fracture occurred; span length taken was 50 mm. Flexural strength was then calculated.
Conclusion: Reinforcement of conventional denture base resin with nylon and glass fibers showed statistical significance in the flexural strength values when compared to unreinforced high impact of denture base resin.
Materials and Methods: The study group comprised 150 outpatients aged 18-64 years, attending the Department of Psychiatry, District Civil Hospital, Raichur. A specific questionnaire was drawn up and was used to record the demographic and medical data and oral hygiene practices. Type III clinical examination was carried out. The WHO Assessment Form 1997 was used to assess the oral health status of the study population.
Results: Of the 150 patients examined, 90 (60%) were male and 60 (40%) were female. The mean age of the patients was 33.79 ± 10.57 years. The majority (52%) were diagnosed with epilepsy and 18% had anxiety disorder. The prevalence of caries was 87.3%. Periodontal status, according to the Community Periodontal Index scores, was as follows: 54% of the patients had shallow pocket (4 mm-5 mm) and 32% of the patients had 6-mm or more deep pocket.
Conclusion: This study highlights a substantial need for prevention and treatment of oral health needs among psychiatric patients, and to increase awareness toward oral health.
MATERIALS AND METHODS: Using a stainless-steel mold, disc-shaped wax patterns with dimensions of 10 mm in diameter and 2 mm thick (in accordance with ADA Specification No. 12) were created and prepared for a total of 75 acrylic samples. Dimensions of all 75 acrylic samples were checked with a digital Vernier caliper. About 25 samples of denture base material were immersed in three different chemical disinfectants: Group I: immersed in chlorhexidine gluconate solution, group II: immersed in sodium hypochlorite solution, and group III: immersed in glutaraldehyde solution. All samples were scrubbed daily for 1 minute with the appropriate disinfectant and submerged for 10 minutes in the same disinfectant. Between disinfection cycles, samples were kept in distilled water at 37°C. Color stability was measured using a reflection spectrophotometer. Surface roughness values were measured by a profilometer at baseline following 15 days and 30 days.
RESULTS: After 15 days, the color stability was better in chlorhexidine gluconate solution group (4.88 ± 0.24) than sodium hypochlorite solution (4.74 ± 0.18) and glutaraldehyde solution group (4.46 ± 0.16). The mean surface roughness was less in glutaraldehyde solution group (2.10 ± 0.19), followed by chlorhexidine gluconate solution group (2.48 ± 0.09) and sodium hypochlorite solution group (2.64 ± 0.03). After 30 days, the color stability was significantly better in chlorhexidine gluconate solution group (4.40 ± 0.02), followed by sodium hypochlorite solution (4.06 ± 0.16) and glutaraldehyde solution group (3.87 ± 0.17). The mean surface roughness was significantly lesser in glutaraldehyde solution group (2.41 ± 0.14), followed by chlorhexidine gluconate solution group (2.94 ± 0.08) and sodium hypochlorite solution group (3.02 ± 0.13).
CONCLUSION: In conclusion, the color stability was significantly better in chlorhexidine gluconate solution group than sodium hypochlorite solution and glutaraldehyde solution group. But the surface roughness was significantly lesser in the glutaraldehyde solution group, followed by the chlorhexidine gluconate and sodium hypochlorite solution group.
CLINICAL SIGNIFICANCE: The maintenance of the prosthesis requires the use of a denture disinfectant; therefore, it is crucial to select one that is effective but would not have a negative impact on the denture base resin's inherent characteristics over time. How to cite this article: Kannaiyan K, Rakshit P, Bhat MPS, et al. Effect of Different Disinfecting Agents on Surface Roughness and Color Stability of Heat-cure Acrylic Denture Material: An In Vitro Study. J Contemp Dent Pract 2023;24(11):891-894.
MATERIALS AND METHODS: To prepare a total of 90 acrylic resin samples (45 acrylic resin samples for each material), four rectangular stainless-steel plates measuring 25 × 25 × 10 mm were fabricated. For both groups, the material was put into the mold at the dough stage. Group I - SR Triplex Hot Heat Cure acrylic; group II - DPI Heat Cure acrylic. Both groups used the same curing procedure. One of the following three techniques was used to cool the material (15 samples from each material) once the curing cycle was finished: (A) water bath, (b) quenching, and (C) air. A traveling microscope was used to measure the distance between the markings on the acrylic samples. The data was recorded and statistically analyzed.
RESULTS: In SR Triplex Hot heat cure acrylic material, the maximum linear dimensional changes were found in the quenching technique (0.242 ± 0.05), followed by the air technique (0.168 ± 0.11) and the least was found in the water bath technique (0.146 ± 0.01). In DPI Heat Cure acrylic material, the maximum linear dimensional changes were found in the quenching technique (0.284 ± 0.09), followed by the air technique (0.172 ± 0.18) and the least was found in the water bath technique (0.158 ± 0.10). There was a statistically significant difference found between these three cooling techniques. On comparison of adaptability, the water bath technique, the marginal gap SR Triplex Hot was 0.012 ± 0.02 and DPI Heat Cure was 0.013 ± 0.02. In the quenching technique, the marginal gap SR Triplex Hot was 0.019 ± 0.04 and DPI Heat Cure was 0.016 ± 0.04. In the air technique, the marginal gap SR Triplex Hot was 0.017 ± 0.01 and DPI Heat Cure was 0.019 ± 0.01.
CONCLUSION: The present study concluded that among the different cooling methods, the water bath technique had the least linear dimensional change, followed by the air and quenching techniques. When comparing the materials, DPI Heat Cure acrylic resin showed a greater linear dimensional change than SR Triplex Hot heat cure acrylic resin.
CLINICAL SIGNIFICANCE: During polymerization, heat-cured acrylic resins experience dimensional changes. Shrinkage and expansion are dimensional changes that occur in heat-cured acrylic resins and have an impact on the occlusal relationship and denture fit. However, the denture base's material qualities and the different temperature variations it experiences during production may have an impact on this. How to cite this article: Kannaiyan K, Rathod A, Bhushan P, et al. Assessment of Adaptability and Linear Dimensional Changes of Two Heat Cure Denture Base Resin with Different Cooling Techniques: An In Vitro Study. J Contemp Dent Pract 2024;25(3):241-244.
OBJECTIVES: This study seeks to examine the closeness between the mandibular canal and the roots of mandibular third molars using IOPARs and to assess the incidence of postoperative neurosensory disorders.
METHODS: A cohort of 100 subjects aged 18 to 25, presenting for partially erupted/ impacted mandibular third molar removal, underwent IOPAR examinations. Data analysis employed IBM SPSS Statistics for Windows, Version 12 (Released 2004; IBM Corp., Armonk, New York, United States), calculating frequencies, percentages, means, standard deviations, and ranges. Radiographic signs of proximity were evaluated, and a standardized surgical procedure was performed under local anesthesia. Postoperative neurosensory disorders were assessed using various methods.
RESULTS: Of the evaluated subjects, darkening of the root (52%) was the most prevalent radiographic sign, followed by interruption of the white line of the canal (20%). The prevalence of radiographic signs varied, with none of the patients experiencing narrowing of the root. Postsurgical paraesthesia assessment revealed no nerve sensitivity alterations in any patient.
CONCLUSION: Preoperative radiographic examination is imperative for determining the relationship between mandibular third molar roots and the inferior alveolar canal, aiding in preventing IAN damage during extraction. Contrary to radiographic signs, there was no observed association between impacted mandibular third molar radiographic signs and the occurrence of postoperative neurosensory disorders.