Displaying publications 61 - 80 of 415 in total

Abstract:
Sort:
  1. Biodiesel synthesis from oil palm empty fruit bunch biochar derived heterogeneous solid catalyst using 4-benzenediazonium sulfonate
    Lim S, Yap CY, Pang YL, Wong KH
    J Hazard Mater, 2020 05 15;390:121532.
    PMID: 31843399 DOI: 10.1016/j.jhazmat.2019.121532
    In this research, biomass from oil palm empty fruit bunch was used as the carbon precursor and sulfonated by 4-benzenediazonium sulfonate (4-BDS) to produce solid acid catalyst. The as-synthesized catalysts were characterized and the performances were tested in esterification of palm fatty acid distillate (PFAD) for biodiesel production. Scanning Electron Microscopy (SEM) showed that clear porous and rough carbon surface was successfully developed after calcination which favored the attachment of sulfonic groups. Thermogravimetric Analysis (TGA) result showed that the catalyst was thermally stable up to 600 °C. Fourier Transform Infrared Spectroscopy (FTIR) proved that SO and SO3H sulfonic groups were successfully attached to the carbon catalyst. From the catalytic activity tests, the results showed that the catalyst which was calcined at 200 °C and sulfonated with 15:1 sulfanilic acid to AC ratio was the optimum catalyst as it provided the highest biodiesel yield. Further investigation showed that the reaction time of 7 h and 20 wt.% of catalyst loading were reported as optimum esterification conditions which provided the highest biodiesel yield at 98.1 %.
    Matched MeSH terms: Arecaceae*
  2. Impacts of 2 species of predatory Reduviidae on bagworms in oil palm plantations
    Jamian S, Norhisham A, Ghazali A, Zakaria A, Azhar B
    Insect Sci, 2017 Apr;24(2):285-294.
    PMID: 26712127 DOI: 10.1111/1744-7917.12309
    Integrated pest management (IPM) is widely practiced in commercial oil palm agriculture. This management system is intended to minimize the number of attacks by pest insects such as bagworms on crops, as well as curb economic loss with less dependency on chemical pesticides. One practice in IPM is the use of biological control agents such as predatory insects. In this study, we assessed the response of predatory natural enemies to pest outbreak and water stress, and document the habitat associations of potential pest predators. The abundances of 2 predatory insect species, namely Sycanus dichotomus and Cosmolestes picticeps (Hemiptera: Reduviidae), were compared bagworm outbreak sites and nonoutbreak sites within oil palm plantations. We also examined habitat characteristics that influence the abundances of both predatory species. We found that the abundance of C. picticeps was significantly higher in bagworm outbreak sites than in nonoutbreak sites. There were no significant differences in the abundance of S. dichotomus among outbreak and non-outbreak sites. Both species responded negatively to water stress in oil palm plantations. Concerning the relationship between predatory insect abundance and in situ habitat quality characteristics, our models explained 46.36% of variation for C. picticeps and 23.17% of variation for S. dichotomus. Both species of predatory insects thrived from the planting of multiple beneficial plants in oil palm plantations. The results suggest that C. picticeps can be used as a biological agent to control bagworm populations in oil palm plantations, but S. dichotomus has no or little potential for such ecosystem service.
    Matched MeSH terms: Arecaceae*
  3. Fulltext Genetic diversity of Elaeis oleifera (HBK) Cortes populations using cross species SSRs: implication's for germplasm utilization and conservation
    Ithnin M, Teh CK, Ratnam W
    BMC Genet, 2017 04 19;18(1):37.
    PMID: 28420332 DOI: 10.1186/s12863-017-0505-7
    BACKGROUND: The Elaeis oleifera genetic materials were assembled from its center of diversity in South and Central America. These materials are currently being preserved in Malaysia as ex situ living collections. Maintaining such collections is expensive and requires sizable land. Information on the genetic diversity of these collections can help achieve efficient conservation via maintenance of core collection. For this purpose, we have applied fourteen unlinked microsatellite markers to evaluate 532 E. oleifera palms representing 19 populations distributed across Honduras, Costa Rica, Panama and Colombia.

    RESULTS: In general, the genetic diversity decreased from Costa Rica towards the north (Honduras) and south-east (Colombia). Principle coordinate analysis (PCoA) showed a single cluster indicating low divergence among palms. The phylogenetic tree and STRUCTURE analysis revealed clusters based on country of origin, indicating considerable gene flow among populations within countries. Based on the values of the genetic diversity parameters, some genetically diverse populations could be identified. Further, a total of 34 individual palms that collectively captured maximum allelic diversity with reduced redundancy were also identified. High pairwise genetic differentiation (Fst > 0.250) among populations was evident, particularly between the Colombian populations and those from Honduras, Panama and Costa Rica. Crossing selected palms from highly differentiated populations could generate off-springs that retain more genetic diversity.

    CONCLUSION: The results attained are useful for selecting palms and populations for core collection. The selected materials can also be included into crossing scheme to generate offsprings that capture greater genetic diversity for selection gain in the future.

    Matched MeSH terms: Arecaceae/genetics*
  4. Fulltext PalmXplore: oil palm gene database
    Sanusi NSNM, Rosli R, Halim MAA, Chan KL, Nagappan J, Azizi N, et al.
    Database (Oxford), 2018 01 01;2018.
    PMID: 30239681 DOI: 10.1093/database/bay095
    A set of Elaeis guineensis genes had been generated by combining two gene prediction pipelines: Fgenesh++ developed by Softberry and Seqping by the Malaysian Palm Oil Board. PalmXplore was developed to provide a scalable data repository and a user-friendly search engine system to efficiently store, manage and retrieve the oil palm gene sequences and annotations. Information deposited in PalmXplore includes predicted genes, their genomic coordinates, as well as the annotations derived from external databases, such as Pfam, Gene Ontology and Kyoto Encyclopedia of Genes and Genomes. Information about genes related to important traits, such as those involved in fatty acid biosynthesis (FAB) and disease resistance, is also provided. The system offers Basic Local Alignment Search Tool homology search, where the results can be downloaded or visualized in the oil palm genome browser (MYPalmViewer). PalmXplore is regularly updated offering new features, improvements to genome annotation and new genomic sequences. The system is freely accessible at http://palmxplore.mpob.gov.my.
    Matched MeSH terms: Arecaceae/genetics*
  5. Fulltext Oil palm plantations in Peninsular Malaysia: Determinants and constraints on expansion
    Shevade VS, Loboda TV
    PLoS One, 2019;14(2):e0210628.
    PMID: 30785883 DOI: 10.1371/journal.pone.0210628
    Agricultural expansion is one of the leading causes of deforestation in the tropics and in Southeast Asia it is predominantly driven by large-scale production for international trade. Peninsular Malaysia has a long history of plantation agriculture and has been a predominantly resource-based economy where expanding plantations like those of oil palm continue to replace natural forests. Habitat loss from deforestation and expanding plantations threatens Malaysian biodiversity. Expanding industrial plantations have also been responsible for drainage and conversions of peatland forests resulting in release of large amounts of carbon dioxide. The demand for palm oil is expected to increase further and result in greater pressures on tropical forests. Given Malaysia's high biophysical suitability for oil palm cultivation, it is important to understand patterns of oil palm expansion to better predict forest areas that are vulnerable to future expansion. We study natural forest conversion to industrial oil palm in Peninsular Malaysia between 1988 and 2012 to identify determinants of recent oil palm expansion using logistic regression and hierarchical partitioning. Using maps of recent conversions and remaining forests, we characterize agro-environmental suitability and accessibility for the past and future conversions. We find that accessibility to previously existing plantations is the strongest determinant of oil palm expansion and is significant throughout the study period. Almost all (> 99%) of the forest loss between 1988 and 2012 that has been converted to industrial oil palm plantations is within 1 km from oil palm plantations that have been established earlier. Although most forest conversions to industrial oil palm have been in areas of high biophysical suitability, there has been an increase in converted area in regions with low oil palm suitability since 2006. We find that reduced suitability does not necessarily restrict conversions to industrial oil palm in the region; however, lack of access to established plantations does.
    Matched MeSH terms: Arecaceae/growth & development*
  6. Recent advances of thermal properties of sugar palm lignocellulosic fibre reinforced polymer composites
    Asyraf MRM, Ishak MR, Norrrahim MNF, Nurazzi NM, Shazleen SS, Ilyas RA, et al.
    Int J Biol Macromol, 2021 Dec 15;193(Pt B):1587-1599.
    PMID: 34740691 DOI: 10.1016/j.ijbiomac.2021.10.221
    Biocomposites are materials that are easy to manufacture and environmentally friendly. Sugar palm fibre (SPF) is considered to be an emerging reinforcement candidate that could provide improved mechanical stiffness and strength to the biocomposites. Numerous studies have been recently conducted on sugar palm biocomposites to evaluate their physical, mechanical and thermal properties in various conditions. Sugar palm biocomposites are currently limited to the applications of traditional household products despite their good thermal stability as a prospective substitute candidate for synthetic fibres. Thus, thermal analysis methods such as TGA and DTG are functioned to determine the thermal properties of single fibre sugar palm composites (SPCs) in thermoset and thermoplastic matrix as well as hybrid SPCs. The biocomposites showed a remarkable change considering thermal stability by varying the individual fibre compositions and surface treatments and adding fillers and coupling agents. However, literature that summarises the thermal properties of sugar palm biocomposites is unavailable. Particularly, this comprehensive review paper aims to guide all composite engineers, designers, manufacturers and users on the selection of suitable biopolymers for sugar palm biocomposites for thermal applications, such as heat shields and engine components.
    Matched MeSH terms: Arecaceae/chemistry*
  7. Structural characterization and evaluation of prebiotic activity of oil palm kernel cake mannanoligosaccharides
    Kalidas NR, Saminathan M, Ismail IS, Abas F, Maity P, Islam SS, et al.
    Food Chem, 2017 Nov 01;234:348-355.
    PMID: 28551246 DOI: 10.1016/j.foodchem.2017.04.159
    In this study, mannanoligosaccharides (MOS) were isolated from palm kernel cake by aqueous extraction using high temperature and pressure. Structural characterization of MOS was carried out using acid hydrolysis, methylation analysis, ESI-MS/MS and 1D/2D NMR. The prebiotic activity of MOS was evaluated in vitro using two probiotic Lactobacillus strains. Sugar analysis indicated the presence of mannose in each of the oligomers. Methylation and 1D/2D NMR analysis indicated that the MOS have a linear structure consisting of (1→4)-β-d-mannopyranosyl residues. ESI-MS/MS results showed that the isolated mannan oligomers, MOS-III, MOS-IV, MOS-V and MOS-VI consist of tetra-, penta-, hexa-, and hepta-saccharides with molecular weights of 689, 851, 1013 and 1151Da, respectively. Based on the in vitro growth study, MOS-III and MOS-IV was found to be effective in selectively promoting the growth of Lactobacillus reuteri C1 strain as evidenced by the optical density of the culture broth.
    Matched MeSH terms: Arecaceae/chemistry*
  8. Conversion of Sago (Metroxylon sagu) Pith Waste to Fermentable Sugars via a Facile Depolymerization Process
    Pang SC, Voon LK, Chin SF
    Appl Biochem Biotechnol, 2018 Apr;184(4):1142-1154.
    PMID: 28965305 DOI: 10.1007/s12010-017-2616-z
    The conversion of starchy sago (Metroxylon sagu) pith waste (SPW), a lignocellulosic biomass waste, to fermentable sugars under mild conditions had been successfully demonstrated. The optimum depolymerization of SPW was achieved at 2 wt% sample loading which was catalyzed by 100 mM of oxalic acid in the presence of 25 wt% NaCl solution at 110 °C for 3 h. Up to 97% SPW sample was being converted into fermentable sugars with limited formation of by-products after two sequential depolymerization cycles. Both reaction temperature and concentration of oxalic acid were crucial parameters for the depolymerization of SPW which exhibited a high selectivity for the production of glucose over other reducing sugars.
    Matched MeSH terms: Arecaceae/chemistry*
  9. Oil palm fiber biodegradation: physico-chemical and structural relationships
    Omar FN, Hafid HS, Samsu Baharuddin A, Mohammed MAP, Abdullah J
    Planta, 2017 Sep;246(3):567-577.
    PMID: 28620814 DOI: 10.1007/s00425-017-2717-5
    MAIN CONCLUSION: X-ray microtomography results revealed that delignification process damaged the oil palm fibers, which correlated well with reduction of lignin components and increase of the phenolic content. Biodegradation investigation of natural fibers normally focuses on physico-chemical analysis, with less emphasis on physical aspect like fiber structures affect from microbial activity. In this work, the performance of Pycnoporus sanguineus to delignify oil palm empty fruit bunch fibers through solid-state fermentation utilizing various ratio of POME sludge was reported. In addition to tensile testing, physico-chemical and X-ray microtomography (µ-CT) analyses on the oil palm fibers were conducted to determine the effectiveness of the degradation process. The best ratio of fiber to fungi (60:40) was chosen based on the highest lignin loss and total phenolic content values and further investigation was performed to obtain fermentation kinetics data of both laccase and manganese peroxidase. µ-CT results revealed that delignification process damaged the pre-treated and untreated fibers structure, as evident from volume reduction after degradation process. This is correlated with reduction of lignin component and increase of the phenolic content, as well as lower stress-strain curves of the pre-treated fibers compared to the untreated ones (from tensile testing). It is suggested that P. sanguineus preferred to consume the outer layer of the fiber, before it penetrates through the cellular structure of the inner fiber.
    Matched MeSH terms: Arecaceae/metabolism*
  10. Cassava/sugar palm fiber reinforced cassava starch hybrid composites: Physical, thermal and structural properties
    Edhirej A, Sapuan SM, Jawaid M, Zahari NI
    Int J Biol Macromol, 2017 Aug;101:75-83.
    PMID: 28288881 DOI: 10.1016/j.ijbiomac.2017.03.045
    A hybrid composite was prepared from cassava bagasse (CB) and sugar palm fiber (SPF) using casting technique with cassava starch (CS) as matrix and fructose as a plasticizer. Different loadings of SPF (2, 4, 6 and 8% w/w of dry starch) were added to the CS/CB composite film containing 6% CB. The addition of SPF significantly influenced the physical properties. It increased the thickness while decreasing the density, water content, water solubility and water absorption. However, no significant effect was noticed on the thermal properties of the hybrid composite film. The incorporation of SPF increased the relative crystallinity up to 47%, compared to 32% of the CS film. SEM micrographs indicated that the filler was incorporated in the matrix. The film with a higher concentration of SPF (CS-CB/SPF8) showed a more heterogeneous surface. It could be concluded that the incorporation of SPF led to changes in cassava starch film properties, potentially affecting the film performances.
    Matched MeSH terms: Arecaceae/chemistry*
  11. Catalytic microwave pyrolysis of oil palm fiber (OPF) for the biochar production
    Hossain MA, Ganesan PB, Sandaran SC, Rozali SB, Krishnasamy S
    Environ Sci Pollut Res Int, 2017 Dec;24(34):26521-26533.
    PMID: 28948458 DOI: 10.1007/s11356-017-0241-6
    Microwave pyrolysis of oil palm fiber (OPF) with three types of Na-based catalysts was experimentally investigated to produce biochar. Sodium hydroxide (NaOH), sodium chloride (NaCl), and sodium carbonate (Na2CO3) with purity 99.9% were selected for this investigation. Microwave muffle reactor (Model: HAMiab-C1500) with a microwave power controller including a microwave generator was used to perform the microwave pyrolysis. OPF particles were used after removing foreign materials, impurities, and dust. Microwave power ranges from 400 to 900 W, temperature ranges from 450 to 700 °C, and N2 flow rates ranges from 200 to -1200 cm3/min were used along with all three Na-based catalysts for this investigation. Lower microwave power, temperature, and N2 flow rate have been found favorable for higher yield of biochar. NaOH is to be found as the more suitable catalyst than NaCl and Na2CO3 to produce biochar. A maximum biochar yield (51.42 wt%) has been found by using the catalysts NaOH at N2 flow rate of 200 cm3/min. One sample of the biochar (maximum yield without catalysts) was selected for further characterization via thermo gravimetric analysis (TGA), scanning electron microscopy (SEM), BET surface area, Fourier transform infrared spectroscopy (FTIR), and ultimate and proximate analysis. SEM and BET surface area analysis showed the presence of some pores in the biochar. High percentage of carbon (60.24 wt%) was also recorded in the sample biochar. The pores and high percentage of carbon of biochar have significant impact on soil fertilization by increasing the carbon sequestration in the soil. It assists to slow down the decomposition rate of nutrients from soil and therefore enhances the soil quality.
    Matched MeSH terms: Arecaceae/chemistry*
  12. Physicochemical assessment of ammonium adsorption using a palm shell-based adsorbent activated with acetic acid: experimental and theoretical studies
    Sahu JN, Dhaouadi F, Sellaoui L, Khor LX, Lee SY, Daud WMAW, et al.
    Environ Sci Pollut Res Int, 2024 Apr;31(19):27980-27987.
    PMID: 38526713 DOI: 10.1007/s11356-024-33002-9
    The adsorption of ammonium from water was studied on an activated carbon obtained using raw oil palm shell and activated with acetic acid. The performance of this adsorbent was tested at different operating conditions including the solution pH, adsorbent dosage, and initial ammonium concentration. Kinetic and equilibrium studies were carried out, and their results were analyzed with different models. For the adsorption kinetics, the pseudo-first order equation was the best model to correlate this system. Calculated adsorption rate constants ranged from 0.071 to 0.074 g/mg min. The ammonium removal was 70-80% at pH 6-8, and it was significantly affected by electrostatic interaction forces. Ammonium removal (%) increased with the adsorbent dosage, and neutral pH condition favored the adsorption of this pollutant. The best ammonium adsorption conditions were identified with a response surface methodology model where the maximum removal was 91.49% with 2.27 g/L of adsorbent at pH 8.11 for an initial ammonium concentration of 36.90 mg/L. The application of a physical monolayer model developed by statistical physics theory indicated that the removal mechanism of ammonium was multi-ionic and involved physical interactions with adsorption energy of 29 kJ/mol. This activated carbon treated with acetic acid is promising to depollute aqueous solutions containing ammonium.
    Matched MeSH terms: Arecaceae/chemistry
  13. Fulltext Improvement in sensitivity of an inductive oil palm fruit sensor
    Misron N, Harun NH, Lee YK, Sidek RM, Aris I, Wakiwaka H, et al.
    Sensors (Basel), 2014;14(2):2431-48.
    PMID: 24496313 DOI: 10.3390/s140202431
    Among palm oil millers, the ripeness of oil palm Fresh Fruit Bunch (FFB) is determined through visual inspection. To increase the productivity of the millers, many researchers have proposed with a new detection method to replace the conventional one. The sensitivity of such a sensor plays a crucial role in determining the effectiveness of the method. In our preliminary study a novel oil palm fruit sensor to detect the maturity of oil palm fruit bunches is proposed. The design of the proposed air coil sensor based on an inductive sensor is further investigated to improve its sensitivity. This paper investigates the results pertaining to the effects of the air coil structure of an oil palm fruit sensor, taking consideration of the used copper wire diameter ranging from 0.10 mm to 0.18 mm with 60 turns. The flat-type shape of air coil was used on twenty samples of fruitlets from two categories, namely ripe and unripe. Samples are tested with frequencies ranging from 20 Hz to 120 MHz. The sensitivity of the sensor between air to fruitlet samples increases as the coil diameter increases. As for the sensitivity differences between ripe and unripe samples, the 5 mm air coil length with the 0.12 mm coil diameter provides the highest percentage difference between samples and it is amongst the highest deviation value between samples. The result from this study is important to improve the sensitivity of the inductive oil palm fruit sensor mainly with regards to the design of the air coil structure. The efficiency of the sensor to determine the maturity of the oil palm FFB and the ripening process of the fruitlet could further be enhanced.
    Matched MeSH terms: Arecaceae
  14. Biochemical characterisation during seed development of oil palm (Elaeis guineensis)
    Kok SY, Namasivayam P, Ee GC, Ong-Abdullah M
    J Plant Res, 2013 Jul;126(4):539-47.
    PMID: 23575803 DOI: 10.1007/s10265-013-0560-8
    Developmental biochemical information is a vital base for the elucidation of seed physiology and metabolism. However, no data regarding the biochemical profile of oil palm (Elaeis guineensis Jacq.) seed development has been reported thus far. In this study, the biochemical changes in the developing oil palm seed were investigated to study their developmental pattern. The biochemical composition found in the seed differed significantly among the developmental stages. During early seed development, the water, hexose (glucose and fructose), calcium and manganese contents were present in significantly high levels compared to the late developmental stage. Remarkable changes in the biochemical composition were observed at 10 weeks after anthesis (WAA): the dry weight and sucrose content increased significantly, whereas the water content and hexose content declined. The switch from a high to low hexose/sucrose ratio could be used to identify the onset of the maturation phase. At the late stage, dramatic water loss occurred, whereas the content of storage reserves increased progressively. Lauric acid was the most abundant fatty acid found in oil palm seed starting from 10 WAA.
    Matched MeSH terms: Arecaceae/growth & development; Arecaceae/metabolism*; Arecaceae/chemistry
  15. Fulltext Two new species of Urothoe (Crustacea, Amphipoda, Gammaridea) from the East Johor Islands Archipelago, Malaysia
    Azman BA, Melvin CW
    Zookeys, 2011.
    PMID: 21594101 DOI: 10.3897/zookeys.87.817
    Two new species of urothoid amphipods from Pulau Sibu and Pulau Tinggi, Johor are described and illustrated. The specimens of Urothoe sibuensis new species were collected by vertical haul plankton net and is distinctively different from other existing Urothoe species by these combination of special characters; similar gnathopods 1-2 with short and stout propodus expanded into poorly defined palms; large eyes and epimeron 3 smooth. Urothoe tinggiensis new species as collected using an airlift suction sampler at seagrass area is characterized by its different gnathopodal configuration with setose dactylus of 5th pereopod; eyes minute; carpus is wider than merus in the 5th pereopod; subquadrate coxa 4; merus and carpus of pereopods 6-7 are linear.
    Matched MeSH terms: Arecaceae
  16. Profiling of metabolites in oil palm mesocarp at different stages of oil biosynthesis
    Neoh BK, Teh HF, Ng TL, Tiong SH, Thang YM, Ersad MA, et al.
    J Agric Food Chem, 2013 Feb 27;61(8):1920-7.
    PMID: 23384169 DOI: 10.1021/jf304561f
    Oil palm is one of the most productive oil producing crops and can store up to 90% oil in its fruit mesocarp. However, the biosynthetic regulation and drivers of palm mesocarp development are still not well understood. Multiplatform metabolomics technology was used to profile palm metabolites during six critical stages of fruit development in order to better understand lipid biosynthesis. Significantly higher amino acid levels were observed in palm mesocarp preceding lipid biosynthesis. Nucleosides were found to be in high concentration during lipid biosynthesis, whereas levels of metabolites involved in the tricarboxylic acid cycle were more concentrated during early fruit development. Apart from insights into the regulation of metabolites during fruit development in oil palm, these results provide potentially useful metabolite yield markers and genes of interest for use in breeding programs.
    Matched MeSH terms: Arecaceae/growth & development*; Arecaceae/metabolism*; Arecaceae/chemistry
  17. Fulltext Future climate effects on suitability for growth of oil palms in Malaysia and Indonesia
    Paterson RR, Kumar L, Taylor S, Lima N
    Sci Rep, 2015;5:14457.
    PMID: 26399638 DOI: 10.1038/srep14457
    The production of palm oil (PO) is highly profitable. The economies of the principal producers, Malaysia and Indonesia, and others, benefit considerably. Climate change (CC) will most likely have an impact on the distribution of oil palms (OP) (Elaeis guineensis). Here we present modelled CC projections with respect to the suitability of growing OP, in Malaysia and Indonesia. A process-oriented niche model of OP was developed using CLIMEX to estimate its potential distribution under current and future climate scenarios. Two Global Climate Models (GCMs), CSIRO-Mk3.0 and MIROC-H, were used to explore the impacts of CC under the A1B and A2 scenarios for 2030, 2070 and 2100. Decreases in climatic suitability for OP in the region were gradual by 2030 but became more pronounced by 2100. These projections imply that OP growth will be affected severely by CC, with obvious implications to the economies of (a) Indonesia and Malaysia and (b) the PO industry, but with potential benefits towards reducing CC. A possible remedial action is to concentrate research on development of new varieties of OP that are less vulnerable to CC.
    Matched MeSH terms: Arecaceae
  18. Fulltext Analysing population structure of Elaeis oleifera germplasm using model-based approach programme STRUCTURE
    Wan Nurhayati Wan Hanaf, Farida Zuraina Mohd Yusof, Rajinder Singh, Ahmad Kushairi Din, Rajanaidu Nookiah, Maizura Ithnin
    Scientific Research Journal, 2017;14(1):54-63.
    MyJurnal
    Elaeis oleifera serves as a source of genetic foundation in oil palm improvement programme, as it possess several interesting agronomic traits such as slow growth, higher oil unsaturation and disease resistance. Malaysian Palm Oil Board (MPOB) has developed a collection of simple sequence repeats (SSRs) from Elaeis oleifera genome (E. oleifera-gSSRs). A total of 21 polymoprhic SSR markers were evaluated in the attempt to assess the population structure of E. oleifera populations. The appropriate common ancestry (K) value was determined to be seven from the likelihood scores. The profile from STRUCTURE analysis indicates considerable sharing of genetic components among E. oleifera population with an exception for Population 01 from Columbia and Population 02 from Costa Rica. The present study provides information on population structure of MPOB E. oleifera collection via model-based method for germplasm conservation and utilisation in breeding programmes.
    Matched MeSH terms: Arecaceae
  19. Transcriptomic data of mature oil palm basal trunk tissue infected with Ganoderma boninense
    Othman NQ, Sulaiman S, Lee YP, Tan JS
    Data Brief, 2019 Aug;25:104288.
    PMID: 31453289 DOI: 10.1016/j.dib.2019.104288
    To date, Ganoderma boninense is known to be the causal agent of basal stem rot (BSR) disease in oil palm (Elaeis guineensis). This disease causes rotting in the roots, basal and upper stem of oil palm. Infection causes progressive destruction of the basal tissues at the oil palm trunk and internal dry rotting, particularly at the intersection between the bole and trunk. Molecular responses of oil palm during infection are not well study although this information is crucial to strategize effective measures to control or eliminate BSR. Here we report three sets of transcriptome data from samples of near-rot section of basal stem tissue of oil palm tree infected with G. boninense (IPIT), healthy section of basal stem tissue of the same G. boninense infected palm (IPHT) and the healthy section of basal stem tissue of the healthy palm (HPHT). The raw reads were deposited into NCBI database and can be accessed via BioProject accession number PRJNA530030.
    Matched MeSH terms: Arecaceae
  20. Fulltext Effect of Charging Parameter on Fruit Battery-Based Oil Palm Maturity Sensor
    Misron N, Kamal Azhar NS, Hamidon MN, Aris I, Tashiro K, Nagata H
    Micromachines (Basel), 2020 Aug 25;11(9).
    PMID: 32854336 DOI: 10.3390/mi11090806
    Oil palm is one of the key industries highly observed in Malaysia, due to its high demand both whether locally or internationally. The oil extraction rate (OER) in palm oil production is used as an element to identify the performance of the mills, estates and producers. In view of this, there are specific instrument or sensor needs to be implemented at the mills especially during the reception of fresh fruit bunches (FFB) transported from the field for oil content processing. This paper aims to study and propose the use of a fruit battery-based oil palm maturity sensor to analyse the effect of the sensor to various parameters. The study utilizes a charging method with different parameters, including a moisture content test on the palm oil samples. Three types of parameters are tested along with the different grades of oil palm fruit from different bunches, such as the load resistance, charging voltage and charging time. The repeatability data of the samples are obtained with the used list of values in each parameter. The results show that the parameters tested for the unripe, under ripe and ripe samples can affect the sensor sensitivity.
    Matched MeSH terms: Arecaceae
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links