Displaying publications 41 - 60 of 123 in total

Abstract:
Sort:
  1. Jalil N, Azma RZ, Mohamed E, Ithnin A, Alauddin H, Baya SN, et al.
    EXCLI J, 2016;15:155-62.
    PMID: 27103895 DOI: 10.17179/excli2015-604
    Glucose-6-Phosphate Dehydrogenase (G6PD) deficiency is the commonest cause of neonatal jaundice in Malaysia. Recently, OSMMR2000-D G6PD Assay Kit has been introduced to quantitate the level of G6PD activity in newborns delivered in Universiti Kebangsaan Malaysia Medical Centre (UKMMC). As duration of sample storage prior to analysis is one of the matters of concern, this study was conducted to identify the stability of G6PD enzyme during storage. A total of 188 cord blood samples from normal term newborns delivered at UKMMC were selected for this study. The cord bloods samples were collected in ethylene-diamine-tetra-acetic acid (EDTA) tubes and refrigerated at 2-8 °C. In addition, 32 out of 188 cord blood samples were spotted on chromatography paper, air-dried and stored at room temperature. G6PD enzyme activities were measured daily for 7 days using the OSMMR2000-D G6PD Assay Kit on both the EDTA blood and dried blood samples. The mean value for G6PD activity was compared between days of analysis using Student Paired T-Test. In this study, 172 out of 188 cord blood samples showed normal enzyme levels while 16 had levels corresponding to severe enzyme deficiency. The daily mean G6PD activity for EDTA blood samples of newborns with normal G6PD activity showed a significant drop on the fourth day of storage (p < 0.005) while for samples with severely deficient G6PD activity, significant drop was seen on third day of storage (p = 0.002). Analysis of dried cord blood showed a significant reduction in enzyme activity as early as the second day of storage (p = 0.001). It was also noted that mean G6PD activity for spotted blood samples were lower compared to those in EDTA tubes for all days (p = 0.001). Thus, EDTA blood samples stored at 2-8 °C appeared to have better stability in terms of their G6PD enzyme level as compared to dried blood samples on filter paper, giving a storage time of up to 3 days.
    Matched MeSH terms: Acetic Acid
  2. Azman EM, Charalampopoulos D, Chatzifragkou A
    J Food Sci, 2020 Nov;85(11):3745-3755.
    PMID: 32990367 DOI: 10.1111/1750-3841.15466
    The aim of this study was to investigate the effects of different solvent and extraction temperatures on the free and bound phenolic compounds and antioxidant activity of dried blackcurrant skins (DBS). Apart from acetic acid buffer solution, different solvent systems, including water, methanol, and mixtures of methanol/water, were also employed and the effects of solvent and temperature (30 and 50 °C) on the free and bound forms of anthocyanins, hydroxycinnamic acids, and flavonols yield were assessed. The results showed that among all solvents, acetic acid buffer resulted in the highest free anthocyanin content (1,712.3 ± 56.1 mg/100 g) (P acid hydrolysis. Acetic acid buffer extracts exhibited the highest free hydroxycinnamic acid content (268.0 ± 4.5 mg/100 g), total phenolic content (3702.2 ± 259.3 mg GAE/100 g), and DPPH activity (60.7 ± 2.0% of inhibition). However, their free flavonol content was slightly lower (60.2 ± 0.8 mg/100 g) compared to 100% methanol at 30 and 50 °C (71.4 ± 1.5 mg/100 g and 71.5 ± 6.2 mg/100 g, respectively). Two-way ANOVA indicated interactions between solvent and temperature (P acid buffer is more environmental friendly, efficient, and cost effective than other solvents, thus, offering an improved extraction method for phytochemicals as valuable ingredients for nutraceutical applications, from underutilized dried blackcurrant skins (DBS).
    Matched MeSH terms: Acetic Acid
  3. Erman Shah Jaios, Suzanah Abdul Rahman, Mooi, Ching Siew, Arifah Abdul Kadir, Mohd Nasir Mohd Desa, Zainul Amirudin Zakaria
    MyJurnal
    Objectives/Research Problem:Melastoma malabathricum L., (Melastomaceae) is a medicinally important plant known as “Senduduk”. Traditionally, the leaves are used to relieve diverse pain-related ailments. Present study aims to examine the antinociceptive activity of methanolic extract of M. malabathricum (MEMM) leaves and its fractions via in vivo models of nociception.

    Materials and Method: Extracts (100, 250, 500 mg/kg) were administered orally 60 minutes prior to subjection to the respective test, n=6/group. Evaluation of MEMM antinociceptive activity; chemically (acetic acid-induced abdominal constriction; ACT, formalin-induced paw licking test; FT) and thermally (hot plate test; HT) models of nociception and elucidation of mechanisms of action involved; role of opioid, vanilloid receptors, glutamatergic system and NO/cGMP pathway were determined. Continuously, MEMM, partitioned into three fractions: petroleum ether (PEMM), ethyl acetate (EAMM), and aqueous (AQMM) extracts and determine the most potent fraction. Therefore, experiment ED50 and its 95% confidence intervals (CI) values were conducted, and ACT was used to screen. Calculation, obtained, PEMM, the most effective was further used to assess the antinociceptive properties. Phytochemical screening, HPLC and GC-MS analysis were performed.

    Results and Discussion: First stage, MEMM exhibited significant (P
    Matched MeSH terms: Acetic Acid
  4. Fathin Nadhirah Binti Kamal Ariffin, Yusilawati Ahmad Nor, Sarina Sulaiman, Nur Ayuni Jamal
    MyJurnal
    This paper addresses the treatment of waste engine oils (WEO) by acid/clay refining method using glacial acetic acid. An optimization of the process parameters in terms of settling time, stirring speed and mixing temperature for treating the WEO was performed using Response Surface Methodology to improve the quality of treated lubricating oil. The quality of the treated WEO (Castrol brand) was evaluated in terms of viscosity index and flash point value. The treated fuel quality is found to have about 95% similarity to the fresh oil used as a standard at the settling time of 24 hours, temperature of 50 °C and mixing speed of 150 rpm. Analysis of variances (ANOVA) showed that settling time plays the most significant parameters of the process followed by the mixing temperature. Solid contaminants which were collected after the treatment were analyzed using SEM-EDS. They contained rough heteregenous shaped particles with elements such as carbon (97%), calcium (1.12%), zinc (0.74%), sulphur (0.73%) and phosphorus (0.29%). Then, four different brands of WEO (Liqui Moly, Castrol, Shell and Pennzoil) were treated at the optimized conditions to determine the feasibility of the method to treat any brands of WEO. It can be concluded that the optimized treatement method is suitable to treat most of WEO. The findings of this study provide the information on the best process condition for treating WEO as well as the solid contaminants present in it.
    Matched MeSH terms: Acetic Acid
  5. Cheah WY, Show PL, Ng IS, Lin GY, Chiu CY, Chang YK
    Int J Biol Macromol, 2019 Apr 01;126:569-577.
    PMID: 30584947 DOI: 10.1016/j.ijbiomac.2018.12.193
    The electrospinning PAN nanofiber membrane (P-CN) was hydrolysed to convert carboxylic groups as reaction sites and covalently graft chitosan molecule. The chitosan derivatives with quaternary ammonium groups exerted greater efficiency against bacteria as compared to pure chitosan. Hence, the chitosan modified membrane (P-CS), can be functionalized with quaternary amine (i.e., glycidyl trimethyl ammonium chloride, GTMAC) to form quaternized chitosan nanofiber membrane (designated as P-HTCC) under various conditions (acidic, neutral, and alkaline). N-quaternized derivatives of chitosan modified membrane (N-HTCC) showed 72% and 60% degree of quaternization (DQ) under acidic and neutral conditions, respectively. Under alkaline condition, additional quaternization of N, O-HTCC via its amino and hydroxyl groups, has improved up to 90% DQ of the chitosan. The antibacterial activity of the quaternized chitosan modified membrane prepared from acetic acid medium is stronger than that prepared from water and alkaline media. Also, antibacterial activity of quaternized chitosan is stronger than chitosan modified membrane against E. coli. The microbiological assessments showed that the water-stable P-HTCC nanofiber membrane under modification in acidic medium exerted antibacterial activity up to 99.95% against E. coli. Therefore, the P-HTCC membrane exhibited high potential to be integrated into microfiltration membrane to effectively disinfect E. coli.
    Matched MeSH terms: Acetic Acid
  6. Zentou H, Zainal Abidin Z, Yunus R, Awang Biak DR, Abdullah Issa M, Yahaya Pudza M
    ACS Omega, 2021 Feb 16;6(6):4137-4146.
    PMID: 33644536 DOI: 10.1021/acsomega.0c04025
    Despite the advantages of continuous fermentation whereby ethanol is selectively removed from the fermenting broth to reduce the end-product inhibition, this process can concentrate minor secondary products to the point where they become toxic to the yeast. This study aims to develop a new mathematical model do describe the inhibitory effect of byproducts on alcoholic fermentation including glycerol, lactic acid, acetic acid, and succinic acid, which were reported as major byproducts during batch alcoholic fermentation. The accumulation of these byproducts during the different stages of batch fermentation has been quantified. The yields of total byproducts, glycerol, acetic acid, and succinic acid per gram of glucose were 0.0442, 0.023, 0.0155, and 0.0054, respectively. It was found that the concentration of these byproducts linearly increases with the increase in glucose concentration in the range of 25-250 g/L. The results have also showed that byproduct concentration has a significant inhibitory effect on specific growth coefficient (μ) whereas no effect was observed on the half-velocity constant (Ks). A new mathematical model of alcoholic fermentation was developed considering the byproduct inhibitory effect, which showed a good performance and more accuracy compared to the classical Monod model.
    Matched MeSH terms: Acetic Acid
  7. Lasekan O, Dabaj F, Muniandy M, Juhari NH, Lasekan A
    BMC Chem, 2021 Mar 13;15(1):16.
    PMID: 33714268 DOI: 10.1186/s13065-021-00743-4
    BACKGROUND: To evaluate the impact of cold fermentation time on bagel rolls, the key aroma-active compounds in the volatile fractions obtained from three different bagel rolls through solvent assisted flavor evaporation (SAFE) were sequentially characterized by an aroma extract dilution analysis (AEDA), quantified by stable isotope dilution and analyzed by odor activity values (OAVs) respectively.

    RESULTS: Findings revealed 40 aroma-active compounds with flavor dilution (FD) factor ranges of 2-1024. Of these, 22 compounds (FD ≥ 16) were quantified by stable isotope dilution assays (SIDA). Subsequent analysis of the 22 compounds by odor activity values (OAVs) revealed 14 compounds with OAVs ≥ 1 and the highest concentrations were obtained for 2,3-butanedione, 2-phenylethanol, 3-methylbutanal and acetoin respectively. Two recombination models of the bagels (i.e. 24 h and 48 h bagels) showed similarity to the corresponding bagels. Omission tests confirmed that 2,3-butanedione (buttery), acetoin (buttery), 2-acetyl-1-pyrroline (roasty), 5-methyl-2-furanmethanol (bread-like), (Z)-4-heptenal (biscuit-like) and 4-hydroxy-2,5-dimethyl-3(2H)-furanone, were the key aroma compounds. Additionally, acetic acid, butanoic acid, 2-phenylethanol (honey-like), 3-methylbutanoic acid, 2/3-methylbutanal, vanillin, 3-methylbutanol, methional were also important odorants of the bagel.

    CONCLUSION: Whilst the long, cold fermented bagels exhibited roasty, malty, buttery, baked potato-like, smoky and biscuit-like notes, the control bagels produced similar but less intense odor notes.

    Matched MeSH terms: Acetic Acid
  8. Zadeh-Ardabili PM, Rad SK
    Biotechnol Rep (Amst), 2019 Jun;22:e00341.
    PMID: 31061816 DOI: 10.1016/j.btre.2019.e00341
    Although inflammation is a reactive to injurious stimuli and considered as beneficial process in body, but it causes some discomforts, such as pain. Murine dietary contains appreciable amounts of fatty acids and antioxidants which encourages researchers to focus on their potential therapeutic effects. This study is aimed to examine the analgesic and anti-inflammatory activity of Neptune krill oil (NKO) and fish oil (FO) in rodent model which are two well-known sources of rich content of n-3 polyunsaturated fatty acids (n-3 PUFAs), mostly eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA). NKO and FO were used at the same dose of 500 mg and also balanced at similar doses of EPA: 12 in NKO vs. 12 in FO wt%, DHA: 7 NKO vs. 8 FO wt%. Application of NKO and FO in acetic acid-induced writhing effect, hot plate, and formalin induced test, indicated the nociceptive activity of the two tested drugs in comparison with normal saline. Also, the anti-inflammatory effect of these supplements was confirmed by carrageenan test. Analysis of cytokines levels in the blood samples of the mice after induction inflammation by carrageenan indicated decreased levels of those proteins compared to that in the normal groups. Both tested drugs, effectively could reduce severe inflammation and pain in rodents in comparison with the references drugs (depends on the tests); however, NKO was found to be more effective.
    Matched MeSH terms: Acetic Acid
  9. Anwer AH, Khan N, Umar MF, Rafatullah M, Khan MZ
    Membranes (Basel), 2021 Mar 22;11(3).
    PMID: 33810075 DOI: 10.3390/membranes11030223
    Microbial electrosynthesis is a new approach to converting C1 carbon (CO2) to more complex carbon-based products. In the present study, CO2, a potential greenhouse gas, was used as a sole carbon source and reduced to value-added chemicals (acetate, ethanol) with the help of bioelectrochemical reduction in microbial electrosynthesis systems (MES). The performance of MES was studied with varying electrode materials (carbon felt, stainless steel, and cobalt electrodeposited carbon felt). The MES performance was assessed in terms of acetic acid and ethanol production with the help of gas chromatography (GC). The electrochemical characterization of the system was analyzed with chronoamperometry and cyclic voltammetry. The study revealed that the MES operated with hybrid cobalt electrodeposited carbon felt electrode yielded the highest acetic acid (4.4 g/L) concentration followed by carbon felt/stainless steel (3.7 g/L), plain carbon felt (2.2 g/L), and stainless steel (1.87 g/L). The alcohol concentration was also observed to be highest for the hybrid electrode (carbon felt/stainless steel/cobalt oxide is 0.352 g/L) as compared to the bare electrodes (carbon felt is 0.22 g/L) tested, which was found to be in correspondence with the pH changes in the system. Electrochemical analysis revealed improved electrotrophy in the hybrid electrode, as confirmed by the increased redox current for the hybrid electrode as compared to plain electrodes. Cyclic voltammetry analysis also confirmed the role of the biocatalyst developed on the electrode in CO2 sequestration.
    Matched MeSH terms: Acetic Acid
  10. Abu Bakar NA, Sulaiman MR, Lajis N, Akhtar MN, Mohamad AS
    J Pharm Bioallied Sci, 2020 Nov;12(Suppl 2):S711-S717.
    PMID: 33828366 DOI: 10.4103/jpbs.JPBS_344_19
    Introduction: Pain is a major global health issue, where its pharmacotherapy prompts unwanted side effects; hence, the development of effective alternative compounds from natural derivatives with lesser side effects is clinically needed. Chalcone; the precursors of flavonoid, and its derivatives have been widely investigated due to its pharmacological properties.

    Objective: This study addressed the therapeutic effect of 3-(2,5-dimethoxyphenyl)-1-(5-methyl furan-2-yl) prop-2-en-1-one (DMPF-1); synthetic chalcone derivative, on antinociceptive activity in vivo.

    Materials and Methods: The antinociceptive profile was evaluated using acetic-acid-induced abdominal writhing, hot plate, and formalin-induced paw licking test. Capsaicin, phorbol 12-myristate 12 acetate (PMA), and glutamate-induced paw licking test were carried out to evaluate their potential effects toward different targets.

    Results: It was shown that the doses of 0.1, 0.5, 1, and 5 mg/kg of DMPF-1 given via intraperitoneal injection showed significant reduction in writhing responses and increased the latency time in hot-plate test where reduced time spent on licking the injected paw in formalin and dose contingency inhibition was observed. The similar results were observed in capsaicin, PMA, and glutamate-induced paw licking test. In addition, the challenge with nonselective opioid receptor antagonist (naloxone) aimed to evaluate the involvement of the opioidergic system, which showed no reversion in analgesic profile in formalin and hot-plate test.

    Conclusion: Collectively, this study showed that DMPF-1 markedly inhibits both peripheral and central nociception through the mechanism involving an interaction with vanilloid and glutamatergic system regardless of the activation of the opioidergic system.

    Matched MeSH terms: Acetic Acid
  11. Mohd Roby BH, Muhialdin BJ, Abadl MMT, Mat Nor NA, Marzlan AA, Lim SAH, et al.
    J Food Sci, 2020 Aug;85(8):2286-2295.
    PMID: 32691422 DOI: 10.1111/1750-3841.15302
    This study aimed to produce sourdough bread using an encapsulated kombucha sourdough starter culture without the addition of baker's yeast. The bioactive metabolites of kombucha sourdough starter and sourdough starter without kombucha were identified using 1 H-NMR analysis with multivariate analysis. The physical properties, including loaf volume, specific loaf volume, firmness, and water activity were determined following standard methods. The shelf life and consumer acceptability of the bread were also being evaluated. The principal component analyses showed the presence of 15 metabolites in kombucha sourdough starter. The major compounds that contributed to the differences from sourdough starter without kombucha were alpha-aminobutyric acid, alanine, acetic acid, riboflavin, pyridoxine, anserine, tryptophan, gluconic acid, and trehalose. The encapsulated kombucha sourdough starter increased the loaf volume (976.7 ± 25.2 mL) and specific loaf volume (4.38 ± 0.12 mL/g) compared to yeast bread. Thus, significant (P
    Matched MeSH terms: Acetic Acid
  12. Chai, K. F., Adzahan, N. M., Karim, R., Rukayadi, Y., Ghazali, H. M.
    MyJurnal
    A novel way to reduce rambutan wastage is to ferment the fruit and valorise the seed post-fer- mentation into other food products and ingredients. Hence, the objective of this study was to investigate the physicochemical properties of rambutan seed during solid-state fermentation of the fruit. Peeled rambutan fruits were subjected to natural fermentation for ten days at 30°C. The environmental temperature, relative humidity, internal and external temperatures of the fermentation mass were measured daily. After ten days of fermentation, the seeds had higher cut test score (867.5), fermentation index (1.527), and a* value (8.20 for non-dried seeds and
    9.93 for dried seeds), and lower L* (51.90 for non-dried seeds and 49.22 for dried seeds) and b* (30.52 for non-dried seeds and 30.12 for dried seeds) values; as compared to the non-fer- mented seeds (cut test score, 0.0; fermentation index, 0.856; L*, a*, and b* values, 64.52, 2.25, and 42.07 for non-dried seeds, respectively, and 61.03, 3.23 and 36.70 for dried seeds, respectively). During this time, pH, total soluble solids, fructose, glucose, sucrose, citric acid, and tartaric acid contents of the seeds decreased by 46, 44, 59, 61, 100, 85, and 100%, respec- tively, while the titratable acidity, lactic acid, acetic acid, and ascorbic acid contents of the seeds increased by 5.5, 7.8, 6.0, and 2.2-fold, respectively. Results showed that eight days of fermentation are adequate to produce well-fermented rambutan seeds that could be further processed into a cocoa powder-like product by roasting the fermented fruits in a manner similar to that of cocoa bean roasting.
    Matched MeSH terms: Acetic Acid
  13. Ravi Kumar G, Dasireddy CR, Varala R, Kotra V, Bollikolla HB
    Turk J Chem, 2020;44(5):1386-1394.
    PMID: 33488238 DOI: 10.3906/kim-2003-10
    A series of nine methyl sulphones ( 3a -3 i ) starting from the aldehydes ( 1a-1i ) were synthesized in two consecutive steps. In the first step, preparation of allyl alcohols ( 2a-2i ) from their corresponding aldehydes by the reaction of sodium borohydride in methanol at room temperature is reported. Finally, methyl sulphones are synthesized by condensing sodium methyl sulfinates with allyl alcohols in the presence of BF 3 .Et 2 O in acetic acid medium at room temperature for about 2-3 h. The reaction conditions are simple, yields are high (85%-95%), and the products were obtained with good purity. All the synthesized compounds were characterized by their 1 H, 13 C NMR, and mass spectral analysis. All the title compounds were screened for antimicrobial activity. Among the compounds tested, the compound 3f has inhibited both Gram positive and Gram negative bacteria effectively and compound 3i has shown potent antifungal activity. These promising components may help to develop more potent drugs in the near future for the treatment of bacterial and fungal infections.
    Matched MeSH terms: Acetic Acid
  14. Farah Anis Jasni, Kuan, Yew Cheong, Lockman, Zainovia, Zainuriah Hassan
    MyJurnal
    Thin films of cerium oxide (CeO2) were prepared on silicon (Si) substrate by metal organic decomposition route. 0.25 M of cerium (III) acetylacetonate (acac) was used as starting materials with the addition of methanol and acetic acid as solvents. Oxide conversion of the film by thermal treatment was conducted at temperature ranging from 400 o C to 1000 o C for 15 min in argon ambient. X-ray diffraction (XRD) analysis utilizing Cukα radiation (Model Brukker’s Diffrac Plus ), Filmetrics system measurement, field emission scanning electron microscope (FE-SEM) (Model Zeiss Supra 35VP FE-SEM) and atomic force microscopy (AFM) (Model SII Nanonavi) were employed to characterize the phase formed and morphologies of the film produced.
    Matched MeSH terms: Acetic Acid
  15. Tan, C. C., Karim, A. A., Latiff, A. A., Gan, C. Y., Ghazali, F. C.
    MyJurnal
    Pepsin-solubilized collagen (PSC) was extracted from the body wall of crown-of-thorns starfish (COTS) (Acanthaster planci) using pepsin digestion in 0.5 M acetic acid. The electrophoretic pattern of PSC showed that it consisted of two α chains (α1 and α2 chains). In addition, the peptide mapping showed that there were some differences in peptide patterns among PSC, calf skin collagen and salmon skin collagen. This suggested that the primary structure of the PSC was different from calf skin collagen and salmon skin collagen. Furthermore, Fourier transform infrared spectroscopy (FTIR) investigation showed the existence of triple helical structure in PSC, suggesting that the triple helical structure was well preserved during the extraction of collagen from COTS. The denaturation temperature of PSC was 33.0°C, which was comparable with mammalian collagen. In addition, the amino acid composition analysis showed that the imino acid content of PSC was similar to mammalian collagen but it was higher than other marine collagen. This suggested that the imino acid content might contributed the denaturation temperature of collagen. The results in this study suggest that PSC from the underutilized COTS has potential to be exploited in various commercial applications.
    Matched MeSH terms: Acetic Acid
  16. Kuan YH, Nafchi AM, Huda N, Ariffin F, Karim AA
    J Sci Food Agric, 2017 Mar;97(5):1663-1671.
    PMID: 27465360 DOI: 10.1002/jsfa.7970
    BACKGROUND: Previous studies have indicated that duck feet are a rich source of gelatin extractable from avian sources. In this study, the physicochemical and functional properties of avian gelatin extracted from duck feet (DFG) with acetic acid were compared with those of commercial bovine gelatin (BG).

    RESULTS: The yield of DFG obtained in this study was 7.01 ± 0.31%. High-performance liquid chromatography analysis indicated that the imino acid content was slightly lower for DFG compared with BG (P < 0.05). Differences in molecular size and amino acids between DFG and BG were also observed. The isoelectric points of DFG and BG were at pH 8 and 5 respectively, and the overall protein solubility of BG was higher than that of DFG. Gels prepared from BG exhibited higher bloom strength, viscosity and clarity and were darker in colour compared with DFG gels (P < 0.05). The gelling and melting points of BG were 21.8 and 29.47 °C respectively, while those of DFG were 20.5 and 27.8 °C respectively. BG exhibited slightly better emulsifying and foaming properties compared with DFG.

    CONCLUSION: Although some differences between DFG and BG were observed, the disparities were small, which indicates that DFG could be exploited commercially as an alternative source of gelatin. © 2016 Society of Chemical Industry.

    Matched MeSH terms: Acetic Acid
  17. Nur Aimi, R., Abu Bakar, F., Dzulkifly, M.H.
    MyJurnal
    Nipa sap or air nira is a sweet natural beverage obtained from a type of palm tree, Nypa fruticans.
    It is readily and spontaneously fermented resulting in the development of alcoholic fermentation products. Objective of this study is to determine the volatile compounds (VOCs) responsible for the aroma in fresh and fermented nipa sap. The sap was left for natural fermentation at 30ºC for 63 days. VOCs of the sap were analysed using static headspace gas chromatography-mass spectrometry (GC-MS). Fresh nipa sap contained ethanol (83.43%), diacetyl (0.59%), and esters
    (15.97%). Fermented nipa sap contained alcohols (91.16 – 98.29%), esters (1.18 – 8.14%), acetoin (0.02 – 0.7%), diacetyl (0.04 – 0.06%), and acetic acid (0.13 – 0.68%). Concentration of ethanol in fresh nipa sap increased from 0.11% (v/v) to 6.63% (v/v) during the fermentation, and slightly decreased to 5.73% (v/v) at day 63. No higher alcohols were detected in the fresh nipa sap. Concentration of 1-propanol and 2-methylpropanol were constant throughout the fermentation with average of 0.004 to 0.006% (v/v) and 0.0001 to 0.0009% (v/v), respectively. 3-methylbutanol increased during the fermentation process. The highest concentration (0.001% v/v) was recorded at day 35. This study has shown differences in VOCs types between fresh and fermented nipa sap.
    Matched MeSH terms: Acetic Acid
  18. Ferra Naidir, Robiah Yunus, Tinia Idaty Mohd. Ghazi, Irmawati Ramli
    MyJurnal
    Palm oil-based Trimethylolpropane ester (TMP ester), with an iodine value of 66.4 g/100g, was epoxidizedto produce epoxidized TMP esters. In situ epoxidation method was used with peracetic acid to eliminatefatty acid double bonds in palm oil-based TMP ester and change it into oxirane ring. This was done toimprove the oxidative stability of trimethylolpropane ester which is a key concern limiting the usefulservice life in lubricants. The epoxidation was performed by reacting acetic acid as active oxygen carrierwith concentrated hydrogen peroxide as oxygen donor and a small amount of homogeneous catalyst(sulphuric acid). The effects of various parameters on the rate of epoxidation (such as the ratio of moleacetic acid to ethylenic unsaturation, hydrogen peroxide to ethylenic unsaturation and acetic acid moleratio, and amount of catalyst) were studied. The rate of oxidation was investigated by the percentageof oxirane oxygen analysis and iodine value.
    Matched MeSH terms: Peracetic Acid; Acetic Acid
  19. Normah Ismail, Nurul Asyiraf Abdul Jabar
    Scientific Research Journal, 2012;9(1):29-42.
    MyJurnal
    Collagen was extracted from catfish (Clarias gariepnus) waste using 0.5M acetic acid and its subsequent precipitation in 2.6M NaCl. The resultant collagen was analysed with respect to its moisture content and physicochemical properties including yield, pH, protein content, colour, odour and thermal stability. A yield of 16.4% and positive collagen attributes indicate that catfish waste has potential as a collagen source. The snowy white, crystal-like and light textured collagen comprises of 5.97% protein and 0.46% moisture, and exhibits a pH of 4.75. Sensory evaluation indicates that the collagen has a slight fishy odour. Viscosity analysis indicates a steady decrease with increasing temperature over the range considered (20-50°C). The pale colour exhibited and limited odour emitted by the extracted collagen indicate that catfish waste collagen could be applied in the food industry without resulting in any undesirable food products attributes. Differential Scanning Calorimetry (DSC) analysis indicated that the collagen exhibits good thermal stability and denatures at a high temperature in a similar manner to mammalian collagen.
    Matched MeSH terms: Acetic Acid
  20. Vivi Noryati Ahmad, Indah Mohd Amin
    MyJurnal
    The purpose of this study is to investigate the effectiveness of Ficus deltoidea (F. deltoidea) as an antioral ulcer on animal models. Adult male Sprague Dawley rats were sedated with Nembutal through intraperitoneal route; oral ulcer models were made by applying 99.5% of glacial acetic acid moistened paper disc on rat buccal mucosa. Four groups of these rats were treated respectively with: no treatment (group 1: negative control); Triamcinolone acetonide (group 2: positive control); 250 mg kg-1 F. deltoidea extract (group 3: experimental); 500 mg kg-1 F. deltoidea extract (group 4: experimental) for 10 consecutive days, respectively. On days 2, 4, 6, 8 and 10, the ulcers size was assessed. Data was analysed statistically by using SPSS. The negative control rats exhibited buccal mucosa injury whereas treatment with F. deltoidea and Triamcinolone acetonide resulted in significantly reduced size of oral ulcer. The percentage of inhibitory area of oral ulcer was more prominent in 500 mg kg-1 F. deltoidea extract than 250 mg kg-1. Meanwhile, in vivo study showed that F. deltoidea extract not toxic up to 1000 mg kg-1. The present findings suggest that F. deltoidea extract effectively accelerates oral ulcer healing process, and could therefore be developed as a therapeutic agent for healing oral ulcer.
    Matched MeSH terms: Acetic Acid
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links