Displaying publications 41 - 60 of 272 in total

Abstract:
Sort:
  1. Methylene blue removal by using pectin-based hydrogels extracted from dragon fruit peel waste using gamma and microwave radiation polymerization techniques
    Abdullah MF, Azfaralariff A, Lazim AM
    J Biomater Sci Polym Ed, 2018 10;29(14):1745-1763.
    PMID: 29989528 DOI: 10.1080/09205063.2018.1489023
    This research aims to compare the ability of smart hydrogel in removing the methylene blue prepared by using two different radiation methods. The extracted pectin from the dragon fruit peel (Hylocereus polyrhizus) was used with acrylic acid (AA) to produce a polymerized hydrogel through gamma and microwave radiation. The optimum hydrogel swelling capacity was obtained by varying the dose of radiation, pectin to AA ratio and pH used. From the array of samples, the ideal hydrogel was obtained at pH 8 with a ratio of 2:3 (pectin: AA) using 10 kGy and 400 W radiated gamma and microwave respectively. The performance of both hydrogels namely as Pc/AA(G) (gamma) and Pc/AA(Mw) (microwave) were investigated using methylene blue (MB) adsorption studies. In this study, three variables were manipulated, pH and MB concentration and hydrogel mass in order to find the optimum condition for the adsorption. Results showed that 20 mg of Pc/AA(G) performed the highest MB removal which was about 45% of 20 mg/L MB at pH 8. While 30 mg of Pc/AA(Mw) able to remove up to 35% of 20 mg/L MB at the same pH condition. To describe the adsorption mechanism, both kinetic models pseudo-first-order, pseudo-second-order were employed. The results from kinetic data showed that it fitted the pseudo-first-order as compared to pseudo-second-order model equation. This study provides alternative of green, facile and affective biomaterial for dye absorbents that readily available.
  2. Fulltext Metallic hair pin aspiration into the left tertiary bronchus
    Noh KB, Salim R, Abdullah MS, Mohamad I
    Malays Fam Physician, 2018;13(2):36-38.
    PMID: 30302183
    Foreign body aspiration is commonly described in infants and children. However, recently, a new high-risk group was identified among young women, especially those from the Muslim population who wear the traditional hair scarf. This is due to the habit of holding the scarf pin in between the lips to free hands to adjust the scarf more easily. Talking, laughing, or coughing while fixing the scarf may result in inadvertent inhalation of the pin into the tracheobronchial tree. We present a case of scarf pin inhalation and the challenges encountered in managing this patient during the successful removal of the pin via flexible bronchoscopy under fluoroscopy guidance. This particular case was technically challenging for us as the sharp tip of the needle was pointing upward and piercing the bronchial mucosa.
  3. Fulltext Lumbar Spinal Stenosis: The Reliability, Sensitivity and Specificity of the Nerve Root Sedimentation Sign
    Yusof MI, Azizan AF, Abdullah MS
    Malays Orthop J, 2018 Jul;12(2):1-6.
    PMID: 30112121 MyJurnal DOI: 10.5704/MOJ.1807.001
    Introduction: This study is to evaluate the reliability, sensitivity and specificity of nerve root sedimentation sign (NRS) in our populations. The NRS is a radiological sign to diagnose lumbar spinal stenosis (LSS). It is claimed to be reliable with high sensitivity and specificity. Materials and Methods: A total of 82 MRI images from 43 patients in Group A (LSS) and 39 patients in Group B (non LSS) were analysed and compared for the presence of the NRS sign. Two assessors were used to evaluate intra and inter-assessor reliability of this sign based on 56 (33 patients, Group A and 23 patients, Group B). The findings were statistically analysed using SPSS software. Results: There was a significant association between spinal claudication and leg numbness with LSS (p<0.001 and Kappa=0.857, p<0.001). The inter-assessor reliability was also good (Kappa of 0.786, p<0.001). Conclusion: The NRS sign has high sensitivity and specificity for diagnosing LSS. The sign also has good intra and inter-assessor reliability.
  4. Hemoperitoneum after accidental dislodgement and subsequent replacement of PEG tube
    Tan YM, Abdullah M, Goh KL
    Gastrointest Endosc, 2001 May;53(6):671-3.
    PMID: 11323604
  5. Prevalence of sexually transmitted diseases among new female drug abusers in a rehabilitation centre
    Nordin RB, Rahman Bin Isa A, Rusli Bin Abdullah M
    Malays J Med Sci, 2001 Jul;8(2):9-13.
    PMID: 22893754 MyJurnal
    The prevalence of sexually transmitted diseases (STD) among female drug abusers was studied by screening 130 new inmates of a rehabilitation centre. Data was collected using a structured questionnaire, physical examination and specimen collection for laboratory investigation at the Community Medicine Clinic of HUSM. The majority (64.6%) were Malays and self-confessed sex workers (77.7%). A high prevalence of syphilis (50.8%), hepatitis B (52.2%), moniliasis (23.8%), trichomoniasis (19.2%) and gonococcal vaginitis (8.5%) was noted. More than half of them harbour 2 or more STDs. Six subjects, of whom 5 were Malays, were HIV positive. The evidence indicates that female drug abusers need a thorough screening for STD followed by an aggressive treatment regimen. Since the majority of them were born Muslims, they should have access to spiritual counselling and rehabilitation, stressing on repentance, and adopting a compassionate and forgiving approach.
  6. A transgressive brown rice mediates favourable glycaemic and insulin responses
    Karupaiah T, Aik CK, Heen TC, Subramaniam S, Bhuiyan AR, Fasahat P, et al.
    J Sci Food Agric, 2011 Aug 30;91(11):1951-6.
    PMID: 21480266 DOI: 10.1002/jsfa.4395
    BACKGROUND: We evaluated glycaemic response of a brown rice variant (BR) developed by cross-breeding. Subjects (n = 9) consumed 50 g carbohydrate equivalents of BR, white rice (WR) and the polished brown rice (PR) in comparison to 50 g glucose reference (GLU) in a cross-over design. Plasma glucose and insulin at 0, 15, 45, 60, 90, 120 and 180 min were measured and incremental area under the curve (IAUC) and indices for glucose (GI) and insulin (II) calculated.
    RESULTS: BR compared to PR or WR produced the lowest postprandial glycaemia (GI: 51 vs 79 vs 86) and insulinaemia (II: 39 vs 63 vs 68) irrespective of amylose content (19 vs 23 vs 26.5%). Only BR was significantly different from GLU for both plasma glucose (P = 0.012) and insulin (P = 0.013) as well as IAUC(glu) (P = 0.045) and IAUC(ins) (P = 0.031). Glycaemic and insulinaemic responses correlated positively (r = 0.550, P < 0.001). Linear trends for IAUC(glu) and IAUC(ins) indicated a greater secretion of insulin tied in with a greater glycaemic response for WR (r(2) = 0.848), moderate for PR (r(2) = 0.302) and weakest for BR (r(2) = 0.122).
    CONCLUSION: The brown rice variant had the lowest GI and II values but these advantages were lost with polishing.
  7. Combustion in porous media and its applications--a comprehensive survey
    Mujeebu MA, Abdullah MZ, Bakar MZ, Mohamad AA, Muhad RM, Abdullah MK
    J Environ Manage, 2009 Jun;90(8):2287-312.
    PMID: 19299066 DOI: 10.1016/j.jenvman.2008.10.009
    The rapid advances in technology and improved living standard of the society necessitate abundant use of fossil fuels which poses two major challenges to any nation. One is fast depletion of fossil fuel resources; the other is environmental pollution. The porous medium combustion (PMC) has proved to be one of the technically and economically feasible options to tackle the aforesaid problems to a remarkable extent. PMC has interesting advantages compared with free flame combustion due to the higher burning rates, the increased power dynamic range, the extension of the lean flammability limits, and the low emissions of pollutants. This article provides a comprehensive picture of the global scenario of research and developments in PMC and its applications that enable a researcher to decide the direction of further investigation. The works published so far in this area are reviewed, classified according to their objectives and presented in an organized manner with general conclusions. A separate section is devoted for the numerical modeling of PMC.
  8. Autophagy and senescence: A new insight in selected human diseases
    Rajendran P, Alzahrani AM, Hanieh HN, Kumar SA, Ben Ammar R, Rengarajan T, et al.
    J Cell Physiol, 2019 12;234(12):21485-21492.
    PMID: 31144309 DOI: 10.1002/jcp.28895
    Senescence and autophagy play important roles in homeostasis. Cellular senescence and autophagy commonly cause several degenerative processes, including oxidative stress, DNA damage, telomere shortening, and oncogenic stress; hence, both events are known to be interrelated. Autophagy is well known for its disruptive effect on human diseases, and it is currently proposed to have a direct effect on triggering senescence and quiescence. However, it is yet to be proven whether autophagy has a positive or negative impact on senescence. It is known that elevated levels of autophagy induce cell death, whereas inadequate autophagy can trigger cellular senescence. Both have important roles in human diseases such as aging, renal degeneration, neurodegenerative disorders, and cancer. Therefore, this review aims to highlight the relevance of senescence and autophagy in selected human ailments through a summary of recent findings on the connection and effects of autophagy and senescence in these diseases.
  9. Fulltext Venous thromboembolism prevention protocol for adapting prophylaxis recommendations to the potential risk post total knee replacement: a randomized controlled trial
    Alameri MA, Syed Sulaiman SA, Ashour AM, Al-Saati MF
    Pharm Pract (Granada), 2020 09 22;18(3):2025.
    PMID: 33029262 DOI: 10.18549/PharmPract.2020.3.2025
    Background: Total knee replacement (TKR) is a major orthopedic surgery that is considered high risk for the development of venous thromboembolism (VTE).

    Objective: The aim of this study is to evaluate the clinical outcomes that resulted from the use of a new proposed VTE risk stratification protocol for selecting a suitable extended VTE prophylaxis for post TKR surgery patients administered in conjunction with patient education programs.

    Method: A randomized controlled trial was conducted in two medical centers in Saudi Arabia. A total of 242 patients were enrolled in the study, 121 patients in each group. The experimental group (A) was assessed by using the proposed VTE risk stratification protocol and also took part in patient education programs about TKR and its complications. The control group (B) was assessed by using the 2005 Caprini risk assessment tool and no education programs were given to this group. Both groups were followed for 35 days post operation.

    Results: The mean age of the participants was 65.86 (SD 8.67) and the majority of them were female 137 (56.6%). The mean body mass index of the study sample was 32.46 (SD 5.51). There were no significant differences between the two groups except for surgery type; the proportion of bilateral TKR in group A was higher than in group B (69/121 (28.5%) vs. 40/121(16.5%), p<0.05). There were no confirmed pulmonary embolism cases in the study sample and diagnosis of deep-vein thrombosis was confirmed in 12/242 (5.0%) of patients: 1/121 (0.8%) in group A and 11/121 (9.1%) in group B (p<0.05). The readmission rate for all patients was 2.5% (6/242), all of whom were in group B (p<0.05).

    Conclusion: The proposed VTE risk stratification protocol that was applied in conjunction with patient education programs reduced VTE complications and readmission events, post TKR surgery. Trial Registration: ClinicalTrials.gov: Identifier: NCT04031859.

  10. Preparation and characterization of nanocomposite films from oil palm pulp nanocellulose/poly (Vinyl alcohol) by casting method
    Asad M, Saba N, Asiri AM, Jawaid M, Indarti E, Wanrosli WD
    Carbohydr Polym, 2018 Jul 01;191:103-111.
    PMID: 29661297 DOI: 10.1016/j.carbpol.2018.03.015
    TEMPO-oxidize nanocellulose (TONC) suspension has been obtained from total chlorine free (TCF) oil palm empty-fruit-bunches (OPEFB) pulp using 4-acetamido-TEMPO (2,2,6,6-tetramethyl piperidin-1-oxyl) mediated oxidation with sodium hypochlorite and sodium bromide in water at 25 °C and pH 10. TONC suspension with varied content from 0.5 to 6% (w/w) reinforced polyvinyl alcohol (PVA) polymer based nanocomposite films were prepared by the casting method. The structural interaction between the TONC and PVA was characterized by the Fourier transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). It was found that the 4% (w/w) TONC content reinforced nanocomposite exhibited the highest tensile strength and modulus with an increase of 122% and 291% respectively, compared to PVA while the elongation at break decreased about 42.7%. Thermal stability of PVA based nanocomposite films was improved after incorporation of TONC. Incorporation of TONC in PVA film increases its crystallinity due to strongly linking between the hydroxyl groups of materials however considerable decreases beyond 2 wt% loading are observed. TONC incorporation beyond 2 wt% also reduces the melting temperature peaks and enthalpy of nanocomposite films. FT-IR spectra, NMR and SEM indicate that there is interaction between the TONC and PVA.
  11. Use of cellulose acetate/polyphenylsulfone derivatives to fabricate ultrafiltration hollow fiber membranes for the removal of arsenic from drinking water
    Kumar M, RaoT S, Isloor AM, Ibrahim GPS, Inamuddin, Ismail N, et al.
    Int J Biol Macromol, 2019 May 15;129:715-727.
    PMID: 30738161 DOI: 10.1016/j.ijbiomac.2019.02.017
    Cellulose acetate (CA) and cellulose acetate phthalate (CAP) were used as additives (1 wt%, 3 wt%, and 5 wt%) to prepare polyphenylsulfone (PPSU) hollow fiber membranes. Prepared hollow fiber membranes were characterized by surface morphology using scanning electron microscopy (SEM), surface roughness by atomic force microscopy (AFM), the surface charge of the membrane was analyzed by zeta potential measurement, hydrophilicity by contact angle measurement and the functional groups by fourier transform infrared spectroscopy (FTIR). Fouling resistant nature of the prepared hollow fiber membranes was evaluated by bovine serum albumin (BSA) and molecular weight cutoff was investigated using polyethylene glycol (PEG). By total organic carbon (TOC), the percentage rejection of PEG was found to be 14,489 Da. It was found that the hollow fiber membrane prepared by the addition of 5 wt% of CAP in PPSU confirmed increased arsenic removal from water as compared to hollow fiber membrane prepared by 5 wt% of CA in PPSU. The removal percentages of arsenic with CA-5 and CAP-5 hollow fiber membrane was 34% and 41% with arsenic removal permeability was 44.42 L/m2h bar and 40.11 L/m2h bar respectively. The increased pure water permeability for CA-5 and CAP-5 hollow fiber membrane was 61.47 L/m2h bar and 69.60 L/m2 h bar, respectively.
  12. Fulltext Prevalence and associated factors of burnout among family medicine residents in Al Madina, Saudi Arabia
    Aldubai SAR, Aljohani AM, Alghamdi AG, Alghamdi KS, Ganasegeran K, Yenbaawi AM
    J Family Med Prim Care, 2019 02;8(2):657-662.
    PMID: 30984690 DOI: 10.4103/jfmpc.jfmpc_268_18
    Background and Aim: Burnout is a common problem for interns and residents. It has been associated with physical and mental health of health care providers as well as low job satisfaction and medical errors. Few studies have investigated this problem among residents. This study aimed to determine the prevalence of burnout and its associated factors among family residents in Al Madina city, Saudi Arabia.

    Materials and Methods: This cross-sectional study was conducted among 75 residents in the family medicine residency programs in Al Madina, Saudi Arabia. A self-administered questionnaire was used that includes questions on sociodemographic characteristics and sources of stress and burnout. T test, analysis of variance (ANOVA) test, and multiple linear regression analysis were employed.

    Results: Majority were female (54.7%) and aged 26 to 30 years (84.0%). The significant predictors of burnout in the final model were "tests/examinations" (P = 0.014), "large amount of content to be learnt" (P = 0.016), "unfair assessment from superiors" (P = 0.001), "work demands affect personal/home life" (P = 0.001), and "lack of support from superiors" (P = 0.006).

    Conclusion: Burnout is present among family medicine residents at a relatively high percentage. This situation is strongly triggered by work-related stressors, organizational attributes, and system-related attributes, but not socio-demographics of the respondents. Systemic changes to relieve the workload of family medicine residents are recommended to promote effective management of burnout.

  13. Fulltext Erratum: (4Z)-4-Benzyl-idene-2-phenyl-1,3-oxazol-5(4H)-one. Corrigendum
    Asiri AM, Faidallah HM, Sobahi TR, Ng SW, Tiekink ER
    Acta Crystallogr E Crystallogr Commun, 2015 Nov 1;71(Pt 11):e4.
    PMID: 26617187 DOI: 10.1107/S2056989015019271
    In the paper by Asiri et al. [Acta Cryst. (2012), E68, o1154], the title and the chemical name of one of the reagents used in the synthesis are corrected.[This corrects the article DOI: 10.1107/S1600536812011579.].
  14. Fulltext Isolation and Production of Nanocrystalline Cellulose from Conocarpus Fiber
    Khan A, Jawaid M, Kian LK, Khan AAP, Asiri AM
    Polymers (Basel), 2021 Jun 01;13(11).
    PMID: 34206136 DOI: 10.3390/polym13111835
    Conocarpus fiber is a lignocellulosic biomass rich in cellulose potentially used for producing nanocrystalline cellulose (NCC), a biomaterial extensively employed in various application fields. In the present work, different hydrolysis times of 10, 20 and 30 min were applied to chemically pre-treated Conocarpus fiber to produce CPNC1, CPNC2, and CPNC3 particles. With acid hydrolysis treatment, the yield of NCC product was successfully retained at 17-19%. Individual, rod-like shapes of NCC particles could be clearly observed under microscopy examination. From chemical composition analysis, a relatively pure cellulose compartment was produced for all NCC samples with substantial removal of lignin and hemicellulose. The physicochemical analysis proved that each nanoparticle sample possessed strong cellulose crystalline structure. For thermal analyses, the heat resistance of NCCs was gradually enhanced with the increased hydrolysis times. Therefore, the extracted NCC product from Conocarpus fiber could be a green nano-filler for developing nanocomposite material in the future.
  15. Novel combination of zero-valent Cu and Ag nanoparticles @ cellulose acetate nanocomposite for the reduction of 4-nitro phenol
    Khan FU, Asimullah, Khan SB, Kamal T, Asiri AM, Khan IU, et al.
    Int J Biol Macromol, 2017 Sep;102:868-877.
    PMID: 28428128 DOI: 10.1016/j.ijbiomac.2017.04.062
    A very simple and low-cost procedure has been adopted to synthesize efficient copper (Cu), silver (Ag) and copper-silver (Cu-Ag) mixed nanoparticles on the surface of pure cellulose acetate (CA) and cellulose acetate-copper oxide nanocomposite (CA-CuO). All nanoparticles loaded onto CA and CA-CuO presented excellent catalytic ability, but Cu-Ag nanoparticles loaded onto CA-CuO (Cu0-Ag0/CA-CuO) exhibited outstanding catalytic efficiency to convert 4-nitrophenol (4-NP) into 4-aminophenol (4-AP) in the presence of NaBH4. Additionally, the Cu0-Ag0/CA-CuO can be easily recovered by removing the sheet from the reaction media, and can be recycled several times, maintaining high catalytic ability for four cycles.
  16. Efficient Synthesis and Characterization of Polyaniline@Aluminium-Succinate Metal-Organic Frameworks Nanocomposite and Its Application for Zn(II) Ion Sensing
    Alsafrani AE, Adeosun WA, Marwani HM, Khan I, Jawaid M, Asiri AM, et al.
    Polymers (Basel), 2021 Sep 30;13(19).
    PMID: 34641198 DOI: 10.3390/polym13193383
    A new class of conductive metal-organic framework (MOF), polyaniline- aluminum succinate (PANI@Al-SA) nanocomposite was prepared by oxidative polymerization of aniline monomer using potassium persulfate as an oxidant. Several analytical techniques such as FTIR, FE-SEM, EDX, XRD, XPS and TGA-DTA were utilized to characterize the obtained MOFs nanocomposite. DC electrical conductivity of polymer-MOFs was determined by four probe method. A bare glassy carbon electrode (GCE) was modified by nafion/PANI@Al-SA, and examined for Zn (II) ion detection. Modified electrode showed improved efficiency by 91.9%. The modified electrode (PANI@Al-SA/nafion/GCE) exhibited good catalytic property and highly selectivity towards Zn(II) ion. A linear dynamic range of 2.8-228.6 µM was obtained with detection limit of LOD 0.59 µM and excellent sensitivity of 7.14 µA µM-1 cm-2. The designed procedure for Zn (II) ion detection in real sample exhibited good stability in terms of repeatability, reproducibility and not affected by likely interferents. Therefore, the developed procedure is promising for quantification of Zn(II) ion in real samples.
  17. Fulltext Smart Home Privacy Protection Methods against a Passive Wireless Snooping Side-Channel Attack
    Nassiri Abrishamchi MA, Zainal A, Ghaleb FA, Qasem SN, Albarrak AM
    Sensors (Basel), 2022 Nov 07;22(21).
    PMID: 36366261 DOI: 10.3390/s22218564
    Smart home technologies have attracted more users in recent years due to significant advancements in their underlying enabler components, such as sensors, actuators, and processors, which are spreading in various domains and have become more affordable. However, these IoT-based solutions are prone to data leakage; this privacy issue has motivated researchers to seek a secure solution to overcome this challenge. In this regard, wireless signal eavesdropping is one of the most severe threats that enables attackers to obtain residents' sensitive information. Even if the system encrypts all communications, some cyber attacks can still steal information by interpreting the contextual data related to the transmitted signals. For example, a "fingerprint and timing-based snooping (FATS)" attack is a side-channel attack (SCA) developed to infer in-home activities passively from a remote location near the targeted house. An SCA is a sort of cyber attack that extracts valuable information from smart systems without accessing the content of data packets. This paper reviews the SCAs associated with cyber-physical systems, focusing on the proposed solutions to protect the privacy of smart homes against FATS attacks in detail. Moreover, this work clarifies shortcomings and future opportunities by analyzing the existing gaps in the reviewed methods.
  18. Fulltext Novel, one-step synthesis of zwitterionic polymer nanoparticles via distillation-precipitation polymerization and its application for dye removal membrane
    Ibrahim GPS, Isloor AM, Inamuddin, Asiri AM, Ismail N, Ismail AF, et al.
    Sci Rep, 2017 Nov 21;7(1):15889.
    PMID: 29162869 DOI: 10.1038/s41598-017-16131-9
    In this work, poly(MBAAm-co-SBMA) zwitterionic polymer nanoparticles were synthesized in one-step via distillation-precipitation polymerization (DPP) and were characterized. [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SBMA) as monomer and N, N'-methylene bis(acrylamide) (MBAAm) as cross-linker are used for the synthesis of nanoparticles. As  far as our knowledge, this is the first such report on the synthesis of poly(MBAAm-co-SBMA) nanoparticles via DPP. The newly synthesized nanoparticles were further employed for the surface modification of polysulfone (PSF) hollow fiber membranes for dye removal. The modified hollow fiber membrane exhibited the improved permeability (56 L/ m2 h bar) and dye removal (>98% of Reactive Black 5 and >80.7% of Reactive orange 16) with the high permeation of salts. Therefore, the as-prepared membrane can have potential application in textile and industrial wastewater treatment.
  19. Fulltext Removal of metal ions and humic acids through polyetherimide membrane with grafted bentonite clay
    Hebbar RS, Isloor AM, Prabhu B, Inamuddin, Asiri AM, Ismail AF
    Sci Rep, 2018 03 16;8(1):4665.
    PMID: 29549259 DOI: 10.1038/s41598-018-22837-1
    Functional surfaces and polymers with branched structures have a major impact on physicochemical properties and performance of membrane materials. With the aim of greener approach for enhancement of permeation, fouling resistance and detrimental heavy metal ion rejection capacity of polyetherimide membrane, novel grafting of poly (4-styrenesulfonate) brushes on low cost, natural bentonite was carried out via distillation-precipitation polymerisation method and employed as a performance modifier. It has been demonstrated that, modified bentonite clay exhibited significant improvement in the hydrophilicity, porosity, and water uptake capacity with 3 wt. % of additive dosage. SEM and AFM analysis showed the increase in macrovoides and surface roughness with increased additive concentration. Moreover, the inclusion of modified bentonite displayed an increase in permeation rate and high anti-irreversible fouling properties with reversible fouling ratio of 75.6%. The humic acid rejection study revealed that, PEM-3 membrane having rejection efficiency up to 87.6% and foulants can be easily removed by simple hydraulic cleaning. Further, nanocomposite membranes can be significantly employed for the removal of hazardous heavy metal ions with a rejection rate of 80% and its tentative mechanism was discussed. Conspicuously, bentonite clay-bearing poly (4-styrenesulfonate) brushes are having a synergistic effect on physicochemical properties of nanocomposite membrane to enhance the performance in real field applications.
  20. Lignocellulosic biomass supported metal nanoparticles for the catalytic reduction of organic pollutants
    Akhtar K, Ali F, Sohni S, Kamal T, Asiri AM, Bakhsh EM, et al.
    Environ Sci Pollut Res Int, 2020 Jan;27(1):823-836.
    PMID: 31811610 DOI: 10.1007/s11356-019-06908-y
    Lignocellulosic biomass waste is a cheap, eco-friendly, and sustainable raw material for a wide array of applications. In the present study, an easy, fast, and economically feasible route has been proposed for the preparation of different zero-valent metal nanoparticles (ZV-MNPs) based on Cu, Co, Ag, and Ni NPs using empty fruit bunch (EFB) biomass residue as support material. The catalytic efficiency of ZV-MNPs/EFB catalyst was investigated against five model pollutants, such as methyl orange (MO), congo red (CR), methylene blue (MB), acridine orange (AO), and 4-nitrophenol (4-NP) using NaBH4 as a source of hydrogen and electron. Comparative study revealed that among as-prepared ZV-MNPs/EFB catalysts, Cu-NPs immobilized onto EFB (Cu/EFB) exhibited maximum catalytic efficiency towards pollutant abasement. Degradation reactions were highly efficient, and were completed within a short time (4 min) in case of MO, CR, and MB, whilst AO and 4-NP were reduced in less than 15 min. Kinetic investigation revealed that the degradation rate of model pollutants accorded with pseudo-first order model. Furthermore, supported catalysts were easily recovered after the completion of experiment by simply pulling the catalyst from reaction system. Recyclability tests performed on Cu/EFB revealed that more than 97% of the reduction was achieved in case of MO dye for four successive cycles of reuse. The as-prepared heterostructure showed multifunctional properties, such as enhanced uptake of contaminants, high catalytic efficiency, and easy recovery, hence, offers great prospects in wastewater purification.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links