The importance of numerical analysis in investigation of piled embankment over soft soil has been developed since 1990. Several investigators have extended the numerical analysis to model ground improvement using soil-column to support embankment or structures. This paper presents a numerical analysis of the Pulverized Fuel Ash (PFA) column-treated peat and compared with field static-loading test results. Back analysis was performed to determine the material parameters and soil stiffness surrounding soil & soil-column. Two geometrical models were used in this analysis: (a) block (Model A), and (b) column group (Model B). This situation was analyzed using commercially available finite element package PLAXIS 2D ver. 8.2. It is found that both models are reliable to simulate the field static-loading test for column-treated peat. Model B shows a higher stability to failure if compared to Model A.
Objective: This study was aimed to explore the perceptions and opinions of happiness among university students. Methods: This qualitative study was conducted in January for the academic year 2010 among 33 Medical Science Students from Management and Science University (MSU), Shah Alam, Malaysia. The facilitator wrote down the conversation during the discussion. The data obtained was classified into various categories. Due to the small sample size, the data was analyzed manually. Results: All participants mentioned that the main source of happiness is money. Good relationship with friends and family is the second source of happiness among university students. Some of the students mentioned that the stability of life and good health are causes of happiness. Few participants mentioned that success in life is one of the causes of the happiness.
Among most important aspects in conducting a clinical trial are random sampling and allocation of subjects. The processes could be easier if done with familiar software used for data entry and analysis instead of relying on other programs or methods. The objective of this article is to demonstrate random sampling and allocation using SPSS in step-by-step manners using examples most relevant to clinicians as well as researchers in health sciences.
The effects of soaking conditions on the quality characteristics of seaweed paste of Kappaphycus alverazii species were studied. Response Surface Methodology (RSM) with a 2-factor, 5-level central composite design (CCD) was conducted to determine the optimum soaking conditions. The interactive effect of dry seaweed: soaking water ratio (X1 = 1: 15-50) and soaking duration (X2 = 30-120 min) on the gel strength (g), whiteness, expansion (%), moisture content (%) and protein content (g/100 g) of the paste were determined. Results showed that the experimental data could be adequately fitted into a second-order polynomial model with multiple regression coefficients (R2) of 0.8141, 0.9245, 0.9118, 0.9113 and 0.9271 for the gel strength, whiteness, expansion, moisture content and protein content, respectively. The gel strength, whiteness, expansion, moisture content and protein content of seaweed paste were dependent on the ratio of dry seaweed to soaking water and also soaking duration. The proposed optimum soaking conditions for the production of seaweed paste is at a ratio of 1:15 (dry seaweed : soaking water) and soaking duration of 117.06 min. Based on the result obtained, the RSM demonstrated a suitable approach for the processing optimization of Kappaphycus alverazii paste.
The 1 MW TRIGA MARK II research reactor at Malaysian Nuclear Agency achieved initial
criticality on June 28, 1982. The reactor is designed to effectively implement the various fields of
basic nuclear research, manpower training, and production of radioisotopes. This
paperdescribes the reactor parameters calculation for the PUSPATI TRIGA REACTOR (RTP);
focusing on the application of the developed reactor 3D model for criticality calculation,
analysis of power and neutron flux distribution and depletion study of TRIGA fuel. The 3D
continuous energy Monte Carlo code MCNP was used to develop a versatile and accurate full
model of the TRIGA reactor. The consistency and accuracy of the developed RTP MCNP model
was established by comparing calculations to the experimental results and TRIGLAV
code.MCNP and TRIGLAV criticality prediction of the critical core loading are in a very good
agreement with the experimental results.Power peaking factor calculated with TRIGLAV are
systematically higher than the MCNP but the trends are the same.Depletion calculation by both
codes show differences especially at high burnup.The results are conservative and can be
applied to show the reliability of MCNP code and the model both for design and verification of
the reactor core, and future calculation of its neutronic parameters.
Most people with musculoskeletal problem suffer pain at multiple body sites. The most frequent form of multisite pain studied is chronic widespread pain (CWP). Focusing solely on CWP may exclude the commoner form of multisite pain which is less wide spread. Therefore, studies on multisite pain which do not consider the spatial distribution of pain can be beneficial to tackle the overall problem of musculoskeletal pain. Nevertheless, multisite pain has been defined differently in the studies among workers. The absence of uniformed definition will jeopardize the understanding of this musculoskeletal problem. A review was thus carried out to identify how multisite pain were defined, how they influenced the reported occurrence of multisite pain and whether the definition determined the physical work exposures assessed in previous studies among worker. A systematic review was initiated by the search of electronic databases for multisite pain. Articles were included and excluded based on the selection criteria. A final of nine full text articles were reviewed. It was found that the difference in the definitions lies mainly in the body sites considered and the pain characteristics. The characteristics of pain influenced the multisite pain prevalence more than the sites.It wasdifficult to conclude whether the definition used determined the physical work exposures since only five studies were involved and three of them had similar research team which may explained the usage of similar exposures. The findings from this review, however, could not be inferred due to the small number of studies involved.
The main objective of this study was to investigate the effectiveness of portable devices (Mp4) in delivering imagery based on video modelling (expert model) among 30 female netball players, examining their personal experience. In the pre-test-intervention-post-test study design, 15 participants were randomly assigned into each of the Mp4 (initial and repeated instructions). Participants practised the imagery for seven days and were interviewed at post-test. In interviews most of the participants in the Mp4 conditions reported that their confidence for shooting increased. They considered the Mp4 to be a useful device to practice imagery at any time and place, but imagery training routines varied among participants and were influenced by their personal life and free time activities. The results of this study signified that the Mp4 has the potential to be a reliable tool to deliver imagery training based on video modelling among netballers.
Knowledge of physical characteristics of Malaysian variety pomelo fruits are necessary for the design of some post harvesting, processing systems such as cleaning, handling, grading and packaging system. For proper development of pomelo grading systems, important relationships between the mass and some physical characteristics of pomelo fruits such as length, width, thickness, surface area, projected areas and volumes must be known. The aim of this research was to measure physical characteristics of two Malaysian varieties of pomelo fruit; Ledang (PO55) and Tambun (PO52) varieties. In this study, the mass of pomelo fruit was evaluated and correlated to measure physical characteristics using Linear, Quadratic, S-curve and Power models. The results showed that the correlation of the mass of pomelo fruit with all measured physical characteristics was significant at the 0.01 probability level. In the nutshell, mass modeling of pomelo fruit for Ledang (PO55) and Tambun (PO52) varieties based on the projected area are recommended according to economical view.
The present study sheds light on the physical and chemical characteristics of microcrystalline cellulose (MCC) isolated from oil palm fronds (OPF) pulps. It was found that the OPF MCC was identified as cellulose II polymorph, with higher crystallinity index than OPF α-cellulose (CrIOPFMCC: 71%>CrIOPFα-cellulose: 47%). This indicates that the acid hydrolysis allows the production of cellulose that is highly crystalline. BET surface area of OPF MCC was found to be higher than OPF α-cellulose (SBETOPFMCC: 5.64m(2)g(-1)>SBETOPFα-cellulose:Qa(0) 2.04m(2)g(-1)), which corroborates their potential as an adsorbent. In batch adsorption studies, it was observed that the experimental data fit well with Langmuir adsorption isotherm in comparison to Freundlich isotherm. The monolayer adsorption capacity (Qa(0)) of OPF MCC was found to be around 51.811mgg(-1) and the experimental data fitted well to pseudo-second-order kinetic model.
In Oceania, a region challenged by rapid urbanisation and climate change, integrative frameworks are required to enable effective actions on health and sustainability. The Ecohealth approach provides a framework for practice that acknowledges human health is intrinsically linked to ecosystem health. This research communication reports on a study involving interviews with twenty-seven leading health and sustainability thinkers from Oceania and across the globe. In examining their ideas for action, the report presents the study findings in relation to the guiding principles of Ecohealth: systems thinking, transdisciplinarity, participation, sustainability, equity and knowledge-to-action. Implications for Ecohealth practitioners working in Oceania are considered.
This study examines the influence of competition on the financial stability of the commercial banks of Association of Southeast Asian Nation (ASEAN) over the 1990 to 2014 period. Panzar-Rosse H-statistic, Lerner index and Herfindahl-Hirschman Index (HHI) are used as measures of competition, while Z-score, non-performing loan (NPL) ratio and equity ratio are used as measures of financial stability. Two-step system Generalized Method of Moments (GMM) estimates demonstrate that competition measured by H-statistic is positively related to Z-score and equity ratio, and negatively related to non-performing loan ratio. Conversely, market power measured by Lerner index is negatively related to Z-score and equity ratio and positively related to NPL ratio. These results strongly support the competition-stability view for ASEAN banks. We also capture the non-linear relationship between competition and financial stability by incorporating a quadratic term of competition in our models. The results show that the coefficient of the quadratic term of H-statistic is negative for the Z-score model given a positive coefficient of the linear term in the same model. These results support the non-linear relationship between competition and financial stability of the banking sector. The study contains significant policy implications for improving the financial stability of the commercial banks.
The Mahmood Merican Award is an annual award for the best original scientific or clinical study submitted by young trainees in orthopaedic surgery in Malaysia, for presentation during the annual scientific meeting of the Malaysian Orthopaedic Association (MOA). This award was initiated in 1997 to encourage high standard of research and scientific presentations among young trainees.A cash prize of RM 1,000 was donated by Dato Dr Mahmood Merican. All Award finalists will represent MOA as ambassadors to regional orthopaedic association meetings, a duty that will be fully sponsored by MOA.
Students-t test is the most popular statistical test. The test compares two mean values to judge if they are different or not. For small data it is possible to conduct it using manual calculation – however that is not the case. Researchers would need to use statistical software and packages to conduct their analysis. This guide will help the junior researchers to conduct independent- and paired-t test using STATA software.
The Malaysian 1 MW TRIGA MARK II research reactor at Malaysian Nuclear Agency is designed to effectively implement the various fields of basic nuclear research, manpower training, and production of radioisotopes for their use in agriculture, industry, and medicine. This study deals with the calculation of neutron flux and power distribution in PUSPATI TRIGA REACTOR (RTP) 14th core configuration. The 3-D continuous energy Monte Carlo code MCNP was used to develop a versatile and accurate full model of the TRIGA core and fuels. The model represents in detailed all components of the core with literally no physical approximation. Continuous energy cross-section data from the more recent nuclear data as well as S (α, β) thermal neutron scattering functions distributed with the MCNP code were used. Results of calculations are analyzed and discussed.
The ability of a robot to plan its own motion seems pivotal to its autonomy, and that is why the motion planning has become part and parcel of modern intelligent robotics. In this paper, about 100 research are reviewed and briefly described to identify and classify the amount of the existing work for each motion planning approach. Meanwhile, around 200 research were used to determine the percentage of the application of each approach. The paper includes comparative tables and charts showing the application frequency of each approach in the last 30 years. Finally, some open areas and challenging topics are presented based on the reviewed papers.
The role of science and technology (S&T) in preventing disasters and building resilience to climate change is featured in this paper, drawing primarily on the presentations and discussion of researchers, practitioners and policy makers from 31 institutions in 17 countries during the Workshop on Natural Disasters and Climate Change in Asia, held on 5–7 November 2012 in Bangi, Malaysia. Issues highlighted include advances in climate modelling and weather forecasts, with emphasis on information gaps; hazards and its cascading effects, focusing on current research and approaches; and the potential for land-based mitigation-adaptation strategies. Progress in mobilizing S&T to support disaster prevention and climate resilience is hindered by factors such as absence or lack of research, incomplete and non-existent scientific records, restricted access to data and capacity to innovate and transmit S&T, among others. The establishment of an Asian Network for Climate Science and Technology is proposed to provide and facilitate exchange of information and aid development of research co-ordination projects led by Asian researchers and possibly to act as a one-stop repository of global climate change related research too. The scope of the network would cover climate research with particular relevance to disaster resilience, including scientific capacity, which is all very distinct in Asia.
Welding process is most widely used in joining components or structures in industry. Although welding is part of a larger category called metals joining, the weld itself still gives significant problems to engineers, researchers and manufacturers until today. Several widely used welding processes, such as the Metal Inert Gas (MIG), Tungsten Inert Gas (TIG), and Manual Metal Arc (MMA), were studied. In the present paper, the characterization of the macrostructure, microstructure, hardness and residual stress distribution are highlighted and discussed to achieve a better understanding of the welded quality which is crucial in determining the welded products.
This research focuses on the ASTER DEM generation for visual and mathematical analysis of topography, landscapes and landforms, as well as modeling of surface processes of Central Alborz, Iran. ASTER DEM 15 m generated using tie points over the Central Alborz and Damavand volcano with 5671 m height from ASTER (Advanced Space borne Thermal Emission and Reflection Radiometer) satellite data using PCI Geomatica 9.1. Geomorphic parameters are useful to identify and describe geomorphologic forms and processes, which were extracted from ASTER DEM in GIS environment such as elevation, aspect, slope angle, vertical curvature, and tangential curvature. Although the elevation values are slightly low in altitudes above 5500 m asl., the ASTER DEM is useful in interpretation of the macro- and meso-relief, and provides the opportunity for mapping especially at medium scales (1:100,000 and 1:50,000). ASTER DEM has potential to be a best tool to study 3D model for to geomorphologic mapping and processes of glacial and per glacial forms above 4300 m asl.
The aim of the research is to compare the physical profile between Malaysian women basketball players and netball players. The physical profile measures were height, body mass, and body fat. The subjects were divided into two groups based on their playing performance and positions. The playing performance consisted of elite/senior, junior, and reserve players. Meanwhile, the playing positions consisted of forward/attack, centre, and guard/defence. The percentage of body fat was determined by means of skinfold measurement at seven different locations. Results showed that there were significant differences in body fat percentage between basketball player and netball players (p < 0.01). The elite/senior basketball players were reported to have the lowest body fat percentage as compared to other basketball or netball players. While for the playing position, guard/defence position basketball players were reported to be the shortest and have the lowest body fat percentage as compared to other playing positions. In conclusion, Malaysian basketball players were found to have better physical or bodily advantaged in terms of playing contact sports as compared to the Malaysian netball players.