MATERIALS AND METHODS: The HVGICs evaluated were Zirconomer [ZR] (Shofu), Equia Forte [EQ] (GC) and Riva [RV] (SDI). Sixty specimens (12mm x 2mm x 2mm) of each material were fabricated using customized Teflon molds. After initial set, the specimens were removed from their molds, finished, measured and randomly divided into 3 groups of 20. Half the specimens in each group were left uncoated while the remaining half was covered with the respective manufacturers' resin coating. The specimens were subsequently conditioned in distilled water, artificial saliva or citric acid at 37°C for 7 days. The uncoated and coated specimens (n=10) were then subjected to dynamic mechanical testing in flexure mode at 37°C with a frequency of 0.1 to 10Hz. Storage modulus, loss modulus and loss tangent data were subjected to normality testing and statistical analysis using one-way ANOVA/Scheffe's post-hoc test and Ttest at significance level p<0.05.
RESULTS: Mean storage modulus ranged from 1.39 ± 0.36 to 10.80 ± 0.86 GPa while mean loss modulus varied from 0.13 ± 0.03 to 0.70 ± 0.14 GPa after conditioning in the different mediums. Values for loss tangent ranged from 39.4 ± 7.75 to 213.2 ± 20.11 (x10 -3 ). Significant differences in visco-elastic properties were observed between mediums and materials. When conditioned in distilled water and artificial saliva,storage modulus was significantly improved when ZR, EQ and RV were uncoated. Significantly higher values were, however, observed with resin coating when the materials were exposed to citric acid.
CONCLUSION: The visco-elastic properties of HVGICs were influenced by both resin coating and chemical environment.
MATERIALS AND METHODS: One conventional composite (Filtek Z350 [FZ]), two bulk-fill composites (Filtek Bulk-fill [FB] and Tetric N Ceram [TN]) and a bulk-fill giomer (Beautifil-Bulk Restorative [BB]) were evaluated. Specimens (12 × 2 × 2 mm) were fabricated using customized stainless steel molds. Specimens were light-cured, removed from their molds, finished, measured and randomly divided into six groups. The groups (n = 10) were conditioned in the following mediums for 7 days at 37 °C: air (control), artificial saliva (SAGF), distilled water, 0.02 N citric acid, heptane, 50% ethanol-water solution. After conditioning, the specimens were rinsed, blotted dry, measured and subjected to flexural testing using a universal testing machine. Representative SEM images of the intact surfaces were obtained to appraise the degradation mechanism by dietary solvents. Data was subjected to statistical analysis using ANOVA/Tukey's tests at significance level p
METHODS: The English DC/TMD was translated into the Malay language using the forward-backward translation procedures specified in the INfORM guideline. The initial Malay instrument was pre-tested, and any discrepancies were identified and reconciled before producing the final Malay DC/TMD. Psychometric properties of the M-GCPS and M-JFLS were evaluated using a convenience sample of 252 subjects and were assessed using internal consistency and test-retest reliability, as well as face, content, concurrent, and construct validity testing. Internal consistency was assessed using Cronbach's alpha, while test-retest reliability was examined using intraclass correlation coefficient (ICC). Concurrent and construct validity of both domains were performed using Spearman ρ correlation test. In addition, construct and discriminant validity were appraised using Kruskal-Wallis and Mann-Whitney U tests, respectively.
RESULTS: Cronbach's alpha values for the M-GCPS and M-JFLS were 0.95 and 0.97, respectively. The ICC was 0.98 for the M-GCPS and 0.99 for M-JFLS. The majority of the tested associations for both domains were found to be statistically significant, with good positive correlations.
CONCLUSION: The M-GCPS and M-JFLS were found to be reproducible and valid. The Malay DC/TMD shows potential for use among Malay-speaking adults.
MATERIALS AND METHODS: Sixteen New Zealand white rabbits were randomly divided into four groups. Modified Hyrax expanders were placed across the midsagittal sutures and secured with miniscrew implants with the following activations: group 1 (control), 0.5 mm expansion/day for 12 days; group 2, 1 mm instant expansion followed by 0.5 mm expansion/day for 10 days; group 3, 2.5 mm instant expansion followed by 0.5 mm expansion/day for 7 days; and group 4, 4 mm instant expansion followed by 0.5 mm expansion/day for 4 days. After 6 weeks, sutural expansion and new bone formation were evaluated histomorphometrically. Statistical analysis was performed using Kruskal-Wallis/Mann-Whitney U tests and Spearman's rho correlation (p
MATERIALS AND METHODS: Four online databases (PubMed, ScienceDirect, Scopus, and Web of Science) were searched using different MeSH terms and Boolean Operators to retrieve the articles (until June 2021), followed by a hand-search of the reference list of the included articles. All full-text, original studies in English that evaluated SDF staining and at least one SDF modification/alternative were included.
RESULTS: Among the assessed studies, nine studies explored the stain-minimization effect of potassium iodide (KI) post-application following SDF treatment. Among these, eight concluded that KI application after SDF treatment significantly reduced tooth staining, while one showed marginal staining following glass ionomer restoration of the SDF-treated dentine. Additionally, one study applied potassium fluoride (KF) and silver nitrate (AgNO3 ) concurrently to mitigate SDF-mediated staining. One study compared SDF staining with polyethylene glycol (PEG)-coated nanoparticles containing sodium fluoride (NaF), and another used nanosilver fluoride (NSF) for staining comparison with SDF.
CONCLUSIONS: Within the limitations of this study, the addition of different materials to SDF has proven to be a beneficial strategy for overcoming tooth staining associated with SDF. Future studies are warranted, particularly clinical trials, to validate these findings.
CLINICAL SIGNIFICANCE: SDF-mediated tooth staining is a serious concern that limits its clinical use. A review of various strategies to overcome this problem will help clinicians enhance its clinical use and patient acceptance.
METHODS: The FAI-M was created according to international guidelines. Internal consistency/test-retest reliability were assessed with Cronbach's alpha/intra-class correlation (ICC) coefficients. Construct and convergent validity were appraised by relating the FAI-M to the Global Oral Health (GOH) questionnaire and Short-form Oral Health Impact Profile (S-OHIP) using Kruskal-Wallis and Spearman's rho correlation (α = 0.05).
RESULTS: Of the 243 participants enrolled, 54.7% (n = 133) had no TMDs, while TMDs were present in 45.3% (n = 110). The FAI-M presented very good internal consistency (α = 0.90) and test-retest reliability (ICC = 0.99). Theoretically predicted FAI-M score patterns matched the GOH categories, and strong correlations were discerned between FAI-M and S-OHIP (rs = 0.71).
CONCLUSION: The FAI-M exhibited good psychometric properties and can be applied in Malay-speaking populations.